Open semitrailer with tarp

KÖGEL S24-1*Volumen-Pritschensattelanhänger*10x vorhan

VIN: WK0S0002400300637

Permissible fifth wheel load: 12,000 kg
Permissible axle assembly load: 24,000 kg (8,000 kg per axle)
Technically possible axle assembly load: approx. 27,000 kg (9,000 kg per axle)
Permissible gross vehicle weight: 36,000 kg
Technically possible gross vehicle weight: approx. 39,000 kg
Theoretical payload: approx. 29,478 kg
Floor load capacity according to DIN EN 283 with test axle load 7,200 kg
(A) Wheelbase: approx. 6,390 mm
(A1) Axle spacing: approx. 1,310 mm
(A2) Axle spacing: approx. 1,310 mm
(D) Overall length: approx. 13,950 mm
(E) Overall width: approx. 2,550 mm
(F) Loading platform length, internal: approx. 13,620 mm
(G) Loading platform width, internal: approx. 2,480 mm
(G2) Rear through-loading width: approx. 2,480 mm
(H1) Loading height unladen in drive position, horizontal: approx. 1,030 mm
(H2) Loading height laden in drive position, horizontal: approx. 1,000 mm
(H3) Achievable ramp height at the rear of the vehicle with fifth wheel height 910 mm, loaded, raised: approx. 1,190 mm
Ride height set to 265 mm.
(K) Side through-loading height, internal: front approx. 2,735 mm - approx. 2,860 mm [adjustable in 5x25 mm steps], rear approx. 2,810-2,860 mm [adjustable in 1x50 mm step]
(K1) Internal height under roof: front approx. 2,875 mm - approx. 3,000 mm [adjustable in 5x25 mm steps], rear approx. 2,950 mm - approx. 3,000 mm [adjustable in 1x50 mm step]
(X1) Overall height unladen in drive position, horizontal: = H1 + K + T +/- body height adjustment | = S + P + K + T +/- height adjustment
Body settings: The structural design of the "Mega" body enables height adjustment of 5x25 mm at the front and 1x50 mm at the rear. The relevant heights (overall height, side through-loading height, internal height) change according to the selected body setting.
(T) Body roof height, lateral: approx. 180 mm. Due to the roof beam design, the internal pallet-width height corresponds to the specified internal height under the roof.
(N) Front overhang (according to ISO 1726): approx. 1,685 mm
(N1) Front overhang radius (according to ISO 1726): approx. 2,040 mm
(O) Rear swing radius (according to ISO 1726): approx. 2,300 mm
(P) Structural height above the fifth wheel: approx. 90 mm
(S) Possible unladen fifth wheel height: approx. 940 - 1,070 mm, level at approx. 940 mm (observe overall height!)

Frame
Conventional ladder-type frame in lightweight steel with through-going cross members.
Cover plate between outer frame and longitudinal members to serve as splash protection for tractor unit rear wheels.
Coupling plate 8 mm thick, fitted with a 2" kingpin according to DIN 74080/ISO 337

Chassis
Axle lift mechanism on axle 1
Axle lift control fully automatic and load-dependent. Start assist: activation by 3x brake, 30% overload permitted up to a speed of 25 km/h.
Three-axle SAF INTRADISC assembly with 370 mm disc brakes, ET 120.
Air suspension with 260 mm lift

Kjdpoxxxr Hjfx Aa Rodw
Chassis attachments
JOST landing legs, mechanical with compensating foot, 24 t lifting capacity. Single-sided operation, right side in direction of travel.
Side underrun protection according to ECE-R73
2 large, waterproof toolboxes made of plastic, internal dimensions approx. 923 x 422 x 460 mm. Mounted at rear, 1x left and 1x right.
Rear right access ladder, extendable.
Low, rigid rear underrun guard made of steel in accordance with ECE-R58
Minimum underrun guard profile height 120 mm, designed for increased test forces.

Brake/air suspension system
WABCO EBS system
Air su

The listing was translated automatically. Translation errors are possible.