Chassis with cab

MAN Brand new MAN TGX 41.400 8x4 truck

Condition: used, mileage: 570,000 km, power: 294 kW (399.73 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 3 axles, overall weight: 26,000 kg, first registration: 05/2002, loading space length: 8,400 mm, loading space width: 2,350 mm, emission class: euro3, color: red, Equipment: air conditioning, parking heater, * Mercedes-Benz 2540 Actros MP1 construction machinery transporter * EZ 2002 * 570,000 km * Euro 3 * Telligent manual transmission with clutch * Air conditioning * Auxiliary heating * 6x2 axle drive * Leaf air suspension * Trailing steering axle * Hydraulic ramps * Body: 8.40 x 2.35 m * Loading height: 110 cm * Wheelbase: 5.90 m Iedpfsv H Iatjx Afnetc * LGW: 12300 kg * Payload: 13700 kg * Total length of vehicle: 11.35 m

Condition: new, mileage: 100 km, power: 290 kW (394.29 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, loading space length: 8,800 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new Mercedes Benz Actros 2540L 6x2 for construction equipment and aerial work platform transport. Truck equipment: - Long-distance driver cab - Auxiliary heating - Safety package - Driver comfort package - Trailer package - Steerable trailing axle - LED rear lights - Euro 6e - Automatic transmission - Sun visor - Beacon lights - Multifunction steering wheel - 1 sleeping bunk - Refrigerator - Navigation - 26,000 kg GVW - Automatic climate control - White - for long-distance transport - etc. Body: - Body manufactured from laser-cut and bent special profiles in low-bed design - Body length approx. 8,800 mm minus toolbox approx. 490 mm - Frame height unladen approx. 1,050 mm - Frame width approx. 2,550 mm - 2 track ramps, each consisting of 1 fixed section and 1 extendable section, lateral sliding adjustment, grated surface, mechanical ramp locking with holders on outer frame for non-use (optionally with strap securing) - Ramp operation via electro-hydraulic unit, incl. emergency control at manifold block and hand pump for total system failure - Hydraulic rear supports - All hydraulic functions controlled via radio remote control - Grated floor with increased load capacity - Rear end with bevel – front bulkhead approx. 2,000 mm high with inward-bent profiles - Stainless steel toolbox inside in front of bulkhead - 2 stainless steel side toolboxes on the frame for lashing equipment (1 left, 1 right) - 1 stainless steel toolbox at rear right (for hydraulic unit and control block) - Work lights: 1 pair on rear cab wall, 2 pairs on frame sides, 2 pairs at rear - 2 sets of steps for access to the cargo area Load securing: - Longitudinal members incl. Multi-X contour with 2.5 t lashing points - 6 pairs of 6-ton lashing points integrated into longitudinal members - Outer frame perforated with 2.5 t lashing points - 6 pairs of 6-ton lashing points integrated into the outer frame - 4 x 6-ton lashing points at the rear - 4 x 6-ton lashing points below, in front of the front bulkhead toolbox Paintwork: - Body powder coated in RAL 9005 black (KTL process) - Bulkhead painted in RAL 9005 black - Ramps and gratings hot-dip galvanized Markings: Ijdpfx Afjw E Abnjnjtc - Reflective tape on sides and rear to EU regulations. Further information available on request.

Condition: new, mileage: 100 km, power: 290 kW (394.29 HP), fuel type: diesel, gearing type: automatic, axle configuration: 3 axles, overall weight: 26,000 kg, loading space length: 8,800 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, color: white, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new Mercedes Benz Actros 2540L 6x2, configured as a construction machinery and access platform transporter. Truck equipment: - Long-distance driver cab - Auxiliary heater - Safety package - Driver comfort package - Trailer package - Steerable trailing axle - LED rear lights - Euro 6e - Automatic transmission - Sun visor - Beacon lights - Multifunction steering wheel - 1 sleeping bunk - Refrigerator - Navigation system - 26,000 kg gross vehicle weight - Automatic climate control - White - Long-distance specification - etc. Body: - Superstructure made from laser-cut and bent special profiles, low-floor design - Body length approx. 8,800 mm (minus approx. 490 mm for storage box) - Frame height unladen approx. 1,050 mm - Frame width approx. 2,550 mm - 2 ramp units, each with 1 fixed section + 1 retractable section, ramps can be shifted laterally - Ramp surface made of grating, mechanical ramp locking including bracket on the outer frame for storage (straps available on request) - Ramp operation via electro-hydraulic aggregate, incl. emergency control unit on the control block and hand pump for total failure - Hydraulic rear supports - All hydraulic functions can be operated via radio remote control - Grating floor with increased load capacity - Rear with bevel, front wall approx. 2,000 mm high with inward-bent profiles - Stainless steel storage box inside in front of the front wall - 2 stainless steel side toolboxes on the chassis for lashing equipment (1 left, 1 right) - 1 stainless steel toolbox at rear right (for hydraulic unit and control block) - Working lights: 1 pair on the rear wall of the cab, 2 pairs on each chassis side, 2 pairs at the rear - 2 access ladders for load area access Load securing: - Longitudinal beams with Multi-X contour including lashing points (2.5 t each) - 6 pairs of 6 t lashing points integrated into the longitudinal beams - Outer frame with perforated design including 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into outer frame - 4 pcs. 6 t lashing points at the rear - 4 pcs. 6 t lashing points ahead of the front wall storage box (lower side) Paintwork: - Body KTL powder coated in RAL 9005 black - Front wall painted in RAL 9005 black - Ramps and gratings are hot-dip galvanized Isdpfx Afow E Abhjnstc Markings: - Reflective tape on sides and rear according to EC standards. Further information available upon request.

Condition: used, mileage: 57,000 km, power: 372 kW (505.78 HP), first registration: 04/2023, fuel type: diesel, overall weight: 34,000 kg, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, Visit our website for more photos, trucks, trailers, and cranes for sale. Please refer to the following reference no.: 99282 ---- REGISTRATION Year ..... 2023 * Registration date ..... 28 * Chassis no. ..... YV2XT40F4PA313726 * Reference no. ..... 99282 CAB * Air conditioning * Cruise control * Adaptive cruise control ENGINE & TRANSMISSION * Electrical connection * Automatic transmission * Euro standard ..... 6 * Horsepower ..... 500 * Mileage ..... 57,000 km TYRES * Size ..... 355/50 22.5 - 315/60 22.5 BRAKES * Disc brakes * ABS * Engine brake SUSPENSION * Front, parabolic * Rear, air suspension CHASSIS * Axle load, front ..... 10,000 kg * Axle load, rear ..... 9,000 - 13,000 - 10,000 kg * Toolbox TOTAL WEIGHT * Curb weight ..... 16,616 kg * Payload ..... 17,385 kg * Permitted gross weight ..... 34,000 kg CRANE * Hydraulic extension ..... 3x * Make ..... Palfinger PK19001 * Lifting capacity ..... 19 T/m * Remote control * Year ..... 2022 DIMENSIONS Itsdpfx Afjx Epzujnjc * Internal width ..... 2,550 mm * Internal length ..... 7,800 mm

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 9,000 mm, loading space width: 2,550 mm, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, 4-axle Volvo machine transporter/platform lift transporter Itjdpfx Afow Itmlsnsc - FH 500 8x2R - Tag axle, electro-hydraulically steered, single tires - Rear axle suspension with air suspension: 1 drive axle, 1 tag axle - FH high safety long-distance cab - Cab auxiliary heater, 2 kW - 33 l refrigerator with freezer compartment under the bunk - Air suspension on front axle(s) - Transmission/I-Shift operation via control unit on driver's seat - I-Shift driving modes: Standard, Performance, and Economy - I-See with map-based topography and traffic data - Eco cruise control (cruise control) including brake cruise - Manual shifting in automatic mode possible (incl. Kickdown) Adaptive Traction Control - Adaptive Cruise Control (ACC) with collision warning and emergency braking - Lane keep assist - Side collision avoidance and turning assistant (both sides) - Driver alert system warns of fatigue - VEB Volvo Engine Brake - etc. WIESE body for platform lift and construction machinery transport with hydraulic loading ramps Includes 2 pairs of wheel recesses incl. wheel recess covers Body dimensions: - Length approx. 9,050 mm useable length - External width 2,550 mm - Loading height top of floor approx. 1,050 mm unladen - Sturdy, weight-optimized welded steel construction, box section design - Short crossmember spacing for high point loads - Rear end tapered for low approach angle - Outer frame profile 90° - Front bulkhead reinforced version - Storage box inside front lower area - Grated floor - Designed for 5,000 daN wheel load - Steel toolboxes above the axles and outer frame with anti-slip coating Load securing: - 9 pairs heavy-duty lashing rings, 8 t, recessed into outer frame - Side rails each with Multi-X contour along entire length with multiple lashing points 2.5 t - 4 lashing points 8 t recessed at rear (left/right/center/center) - 4 lashing points 8 t recessed at front/bulkhead (left/right/center/center) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps as 2 individual/extendable ramps, both ramps laterally adjustable - Ramp can be used as loading ramp or as cross-over ramp for warehouse use (extension part remains closed), fixed ramp section lays onto loading bay - Sturdy locking bar as transport security (optionally with belt system) - 2 hydraulic rear stabilizers with support plate, warning tone, and indicator light in cab - Ramp and support operation by electro-hydraulic system - Control via wireless remote and emergency controls on manifold - Control manifold mounted in stainless steel toolbox on chassis side - Superwinch winch 8.2 t with approx. 20 m steel cable - Access steps with handrail right and left for deck access - 5 stainless steel toolboxes in drawer version, with lighting as optional extra - Side skirts as per sample photos (green vehicle) as optional extra - Body coating KTL - Ball-type trailer hitch at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted at top of bulkhead - 4 LED work lights on outer chassis as perimeter lighting - 2 LED work lights at rear - 1 removable beacon at rear The stock vehicle is finished with a white cab and 'Novagrau' body (outer frame coated in RAL color of your choice on request).

Condition: excellent (used), functionality: fully functional, power: 128 kW (174.03 HP), gearing type: automatic, fuel type: diesel, empty load weight: 17,100 kg, shovel volume: 4.5 m³, Year of construction: 2011, operating hours: 9,223 h, Equipment: air conditioning, all wheel drive, TOP CONDITION – AVAILABLE IMMEDIATELY!!! Itjdpfxsyc T Nio Afnec VOLVO L90F Year 2011 Air conditioning, Rearview camera Central lubrication system Hydraulic quick coupler 1x high tip bucket approx. 4.5 m3

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: white, gearing type: automatic, emission class: euro5, total length: 9,440 mm, total width: 2,470 mm, total height: 3,150 mm, Year of construction: 2023, Equipment: ABS, AdBlue, EBS, air conditioning, central locking, cruise control, differential lock, - Alarm system - Compressor - Immobiliser - LED headlights - Spare wheel - Tachograph Model description: MAN TRUCK CHASSIS – TGS 41.480 – 8X4 BB CH Chassis Cab Code Diesel TYPE: TGS 41.480 - 8X4 BB CH GEAR BOX TYPE: TIPMATIC 12 28OD REAR OVERHANG: 800mm BREAK TYPE: DRUM BREAKER TYRES: 13R 22.5 DIMENSION: L 9.44 x W 2.47 x H 3.15mm DRIVE HAND: LH DRIVE wheelbase: MAIN 2980, Front 1795mm, Rear 1400mm BATTERY 12 V,175 Ah 2 UNITS MAIN BATTERY SWITCH ELECTRIC SAFETY CUT-OUT LOCKABLE BATTEY BIX WITH PADLOCK GUARD PLATE FOR TANKS FUEL TANK RIGHT STEEL ADBLUE TANK CAPACITY 35L LEFT FULL TANK CAP LOCKABLE FOR MASTER KEY SYSTEM PROVISIONALLY MOUNTED 1-CYLINDER 360ccm COMPRESSED-AIR TREATMENT PNEUMATICALLY CONROLLED ELECTRONIC BRAKE SYSTEM (EBS) ANTI-LOCK BREAKING SYSTEM(ABS) FULL BREAK ASSISTANT MAN EASY START IMMOBILISER REAR LIGHTS STONE PROTECTION FOR REAR LIGHTS GUARD WIDE MESH REVERSING WARNING SYSTEM SIDE MARKER LIGHTS LED ANTI-NOISE SKIRT ENGINE RADIATION PROTECTION LOWER ENGINE OIL DIPSTICK AND DIGITAL OIL LEVEL GUAGE ANTI FREEZE DOWN TO -32c SINGLE-DISC CLUTCH 430mm DRY REINFORCED (LONG LIFE) DRIVELINE PROPSHAFT,REINFORCED PROPSHAFT 2nd REAR AXLE REINFORCED STEERING OIL TANK WITH ELECTRICAL MEASURING SENSOR AXLE RATIO I = 4.00 DIFFERENTIAL LOCKS ON DRIVEN REAR AXLES EMERGENCY STEERING PUMP VEHICLE TOOL KIT FIRST AID KIT WARNING TRIANGLE 1 UNITS COMPRESSED-AIR CONNECTION CAB JACK 12,000 KG ELECTRONIC STABILITY PROGRAM ( ESP) ANTI-SLIP CONTROL (ASR) CC) IDLE SHUT DOWN SUSPENSION TYPE FOR FRONT AXLES AND DRIVEN REAR AXLES LEAF/LEAF (BB) LEAF-SPRING SUSPENSION ON FRONT AXLE PARABOLIC 4-LEAF STEEL LEAF-SPRING SUSPENSION ON 2ND FRONT AXLE PARABOLIC 4-LEAF STEEL LEAF-SPRING SUSPENSION ON REAR AXLE TRAPEZOIDAL STEEL LEAF-SPRING SUSPENSION ON 2ND REAR AXLE TRAPEZOIDAL STEEL SPRING LOAD-BEARING CAPACITY FRONT AXLE 9,500 KG SPRING LOAD-BEARING CAPACITY OF 2ND FRONT AXLE 9,500 KG SPRING LOAD-BEARING CAPACITY OF REAR AXLE 16,000 KG SPRING LOAD-BEARING CAPACITY OF 2ND REAR AXLE 16,000 KG STABILISER FRONT AXLE STABILISER 2ND FRONT AXLE STABILISER REAR AXLE STABILISER 2ND REAR AXLE CAB TILT MECHANISM MANUAL WINDSCREEN COMPOSITE SAFETY GLASS TINTED SUNBLIND IN FRONT OF WINDSCREEN WIPER SYSTEM FOR WINDSCREEN WITH REMOTE CONTROL DOOR WINDOWS TINTED STONE PROTECTION FOR FRONT HEADLIGHTS DAYTIME DRIVING LIGHTS LED FOG LIGHTS H7 CORNERING LIGHTS H7 TURN SIGNAL LIGHTS SIDES LED HEADLIGHT BEAM REGULATOR COMPRESSED-AIR HORN 2UNITS CAB ROOF 2 REVOLVING BEACONS ON CAB ROOF 1 RIGHT AND 1 LEFT PREPARATION FOR LOADING AREA LIGHTNING EXTERIOR REAR-VIEW MIRROR ELECTRICALLY ADJUSTABLE SEAT COVERS Itjdpfx Ajw Dupuefnjc FABRIC COMFORT DRIVER'S SEAT ARM RESTS STORAGE SPACE IN SEAT BRACKET OF CO DRIVER'S SEAT MULTI-FUCTION STEERING WHEEL ADJUSTABLE HEIGHT AND ANGLE STERRING WHEEL WITH PARKING POSITION STEERING LOCK CONTINENTAL SOCKET CAB CENTRE 2 UNITS 12 V & 24 V MANUAL WINDSCREEN ROLLER BLIND INTERNAL HAZARD...

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), fuel type: diesel, gearing type: automatic, axle configuration: > 3 axles, overall weight: 32,000 kg, loading space length: 9,000 mm, loading space width: 2,550 mm, emission class: euro6, color: white, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, 4-axle Volvo machine/MEWP transporter FH 500 8x2R - Trailing axle, electro-hydraulically steered, single tires - Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle - High-safety long-distance FH cab - Cab auxiliary heater, 2 kW - 33 l refrigerator with freezer compartment, under bunk - Air suspension on front axle(s) - Gearbox/I-Shift operated via driver's seat control unit - I-Shift drive modes: Standard, Performance, and Economy - I-See with map-based topography and traffic information - Eco Cruise Control (cruise control) including brake cruise control - Manual gear selection possible in automatic mode (incl. kickdown) Adaptive traction control - Adaptive cruise control (ACC) with collision warning and emergency braking - Lane keeping assist - Side collision avoidance and turn assist (both sides) - Driver alert system warns of fatigue - VEB Volvo engine brake - etc. WIESE body for MEWP and construction machine transport with hydraulic loading ramps With 2 pairs of wheel recesses including covers Body dimensions: - Length: approx. 9,050 mm usable - External width: 2,550 mm - Loading height top of floor: approx. 1,050 mm unladen - Robust, weight-optimized welded steel construction, box-section design - Short cross member spacing for high point loads - Tapered rear for low ramp angle - Outer frame profile 90° - Front wall in reinforced version - Internal toolbox at the bottom in front of front wall - Grating floor - Designed for 5,000 daN wheel load - Steel sheet boxes above axles and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 to., recessed into outer frame - Longitudinal members each with Multi-X contour along full length with numerous 2.5 to. lashing points - 4 lashing eyes 8 to. recessed at rear (left/right/center/center) - 4 lashing eyes 8 to. recessed in front wall (left/right/center/center) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps as 2 individual/extendable units, both ramps laterally adjustable - Ramp can be used as drive-on ramp and as through ramp for warehouse equipment (extension section remains closed), the fixed ramp part is placed on the loading dock - Robust tension bar for transport securing (alternative: strap tensioning) - 2 hydraulic rear supports with pads, with warning buzzer and indicator in cab - Ramp and support operation via electro-hydraulic system - Remote control and emergency control on the control block Isdpfx Afow Itmrjnetc - Stainless steel control box mounted on frame side - Superwinch 8.2 t with approx. 20 m steel cable - Step access with grab handles left/right for cargo area access - 5 stainless steel drawer-type toolboxes, incl. lighting (option, extra charge) - Side skirting as per sample pictures (green vehicle) optional, extra charge - KTL body coating - Trailer coupling with 3.3 t ball head at rear - 4 LED work lights - 2 LED taillights mounted high on front wall - 4 external LED work lights on frame as area illumination - 2 LED work lights at rear - 1 removable rotating beacon at rear The stock vehicle is supplied with cab in white and body in nova grey (external frame painted in RAL color of your choice on request).

Condition: used, Year of construction: 2022, Equipment: compressed air brake, ASW 271 GIANT (0010) Used Fliegl ASW 271 Gigant Itedpsw Sftfefx Afnjc (0020) Tandem axle, leaf suspension, trailing steering (0030) K80, lower hitch, air brakes (0040) Tyres: 560/60R22.5 BKT,