Wrecker

MAN Baumaschinen- Arbeitsbühnentransporter Rampen

Condition: new, mileage: 100 km, power: 324 kW (440.52 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, loading space width: 2,550 mm, loading space length: 8,900 mm, loading space height: 1,050 mm, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new MAN 26.440 TGX 6x2-4 LL as a construction machinery and aerial platform transporter. Truck equipment: - Long-distance driver cab - Auxiliary heater - Safety package - Driver comfort package - Storage package - Trailer package - Steerable trailing axle - LED tail lights - Euro 6e emission standard - Automatic transmission Gkedpoxqkaysfx Ab Aef - Sun visor - Rotating beacons - Reversing camera - Multifunction steering wheel - 1 sleeper berth - Refrigerator - Media/navigation system - Flatbed – 100 km – 324 kW (441 HP) - Internal combustion engine - Diesel, automatic - Euro 6e – 4 (Green environmental badge) - 26,000 kg gross vehicle weight - Automatic climate control - White – Long distance – etc. Superstructure: - Body constructed from laser-cut and bent special profiles in low-bed design - Superstructure length approx. 8,850 mm - Frame height unloaded approx. 1,050 mm - Frame width approx. 2,550 mm - 2 loading ramps, each ramp consists of 1 fixed section and 1 extension section, ramps laterally adjustable; ramp surface made from grating; mechanical locking of ramps including mounting bracket on the outer frame for storage when not in use (optional securing with straps) - Ramp operation via electro-hydraulic unit, including emergency control on the control block as well as hand pump in case of total failure - Hydraulic rear supports - All hydraulic functions operated by radio remote control - Grated floor with increased load capacity - Rear end with taper; front wall approx. 2,000 mm high with inward-flanged profiles - Stainless steel tool box inside in front of the front wall - 2 stainless steel tool boxes mounted to the side of the frame for lashing equipment (1 left, 1 right) - 1 stainless steel tool box at the rear right (for hydraulic unit and control block) - Work lights: 1 pair on rear of cab, 2 pairs on each side of the frame, 2 pairs at the rear - 2 step ladders for accessing the load area Load securing: - Longitudinal beams incl. Multi-X contour with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the longitudinal beams - Outer frame, perforated version, with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the outer frame - 4 x 6 t lashing points at the rear - 4 x 6 t lashing points at the front, below the tool box in front of the front wall Paintwork: - Superstructure cataphoretic dip primed and powder-coated in RAL 9005 black - Front wall painted in RAL 9005 black - Ramps and grating are hot-dip galvanized Markings: - Reflective tape applied on the sides and rear in accordance with EU regulations. Further information available on request.

Condition: new, axle configuration: > 3 axles, total length: 9,300 mm, total width: 2,540 mm, suspension: air, tire size: 245/70 R17.5, wheelbase: 1,360 mm, color: blue, Year of construction: 2023, Equipment: tail-lift, Colour: Blue Payload: 54,465 kg Main Features: Manufacturer: Faymonville Model: MAX 110-Z-4AA-9.30-U Chassis Number: YAMT14XX4N0107629 Year of Manufacture: New and unused (2023) Weights / Payload: - King-pin load: 23,000 kg - Axle load: 12,000 kg - Total axle load: 48,000 kg - Gross vehicle weight (GVW): 71,000 kg - Unladen weight: 16,535 kg - Payload: 54,465 kg Axles: - Axle make: BPW - Hydraulic steering - Pneumatic suspension with lifting/lowering valve - WABCO brake system - Tyres: 245/70 R17.5 – Michelin (Load index: 146/146 F) - 1st axle liftable Dimensions: - Load length: 9,300 mm - Extensions: 6,500 + 6,800 mm - Load platform width: 2,540 mm - Load height: 900 mm Additional Information: - Double-extendable loading platform - Container locks - Width outriggers + wooden outriggers for extension Gkedpouu Hcfefx Ab Aef - Lashing rings - Pair of double-folding loading ramps - Central lubrication - 1x spare wheel with holder - JOST landing gear - 24 Volt electrical system - 2.0'' king-pin - One galvanised steel front wall - Electrically driven hydraulic pump - Manual steering - Twist locks = Further Information = General Information Year of manufacture: 2023 Axle configuration Tyre size: 245/70 R17.5 Suspension: Air suspension Rear axle 1: Twin tyres; Lift axle; Max. axle load: 12,000 kg; Steered; Axle make: BPW; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Rear axle 2: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Rear axle 3: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Rear axle 4: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Weights Unladen weight: 16,535 kg Payload: 54,465 kg Gross vehicle weight: 71,000 kg Functionality Load platform height: 655.35 mm (Note: Please verify source, as figure seems inconsistent) Extendable body: Yes Condition General condition: Very good Technical condition: Very good Optical condition: Very good Financial Information Price: On request Further Information Please contact Stefan Schaapveld for more information.

Condition: new, mileage: 100 km, power: 324 kW (440.52 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, loading space width: 2,550 mm, loading space length: 8,900 mm, loading space height: 1,050 mm, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new MAN 26.440 TGX 6x2-4 LL as a construction machinery and aerial platform transporter. Truck equipment: - Long-distance driver cab - Auxiliary heater - Safety package - Driver comfort package - Storage package - Trailer package - Steerable trailing axle - LED tail lights - Euro 6e emission standard - Automatic transmission - Sun visor - Rotating beacons - Reversing camera - Multifunction steering wheel - 1 sleeper berth - Refrigerator - Media/navigation system - Flatbed – 100 km – 324 kW (441 HP) - Internal combustion engine - Diesel, automatic - Euro 6e – 4 (Green environmental badge) - 26,000 kg gross vehicle weight - Automatic climate control - White – Long distance – etc. Superstructure: - Body constructed from laser-cut and bent special profiles in low-bed design - Superstructure length approx. 8,850 mm - Frame height unloaded approx. 1,050 mm - Frame width approx. 2,550 mm - 2 loading ramps, each ramp consists of 1 fixed section and 1 extension section, ramps laterally adjustable; ramp surface made from grating; mechanical locking of ramps including mounting bracket on the outer frame for storage when not in use (optional securing with straps) - Ramp operation via electro-hydraulic unit, including emergency control on the control block as well as hand pump in case of total failure - Hydraulic rear supports - All hydraulic functions operated by radio remote control - Grated floor with increased load capacity - Rear end with taper; front wall approx. 2,000 mm high with inward-flanged profiles - Stainless steel tool box inside in front of the front wall - 2 stainless steel tool boxes mounted to the side of the frame for lashing equipment (1 left, 1 right) - 1 stainless steel tool box at the rear right (for hydraulic unit and control block) - Work lights: 1 pair on rear of cab, 2 pairs on each side of the frame, 2 pairs at the rear - 2 step ladders for accessing the load area Load securing: - Longitudinal beams incl. Multi-X contour with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the longitudinal beams - Outer frame, perforated version, with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the outer frame Gsdpfot T H Skox Ab Ajkf - 4 x 6 t lashing points at the rear - 4 x 6 t lashing points at the front, below the tool box in front of the front wall Paintwork: - Superstructure cataphoretic dip primed and powder-coated in RAL 9005 black - Front wall painted in RAL 9005 black - Ramps and grating are hot-dip galvanized Markings: - Reflective tape applied on the sides and rear in accordance with EU regulations. Further information available on request.

Condition: used, mileage: 376,000 km, fuel type: diesel, color: white, emission class: none, Year of construction: 1992, Equipment: crane, IVECO EUROCARGO 130E18 Year 1992 Diesel / Euro 0 Km: 376,000 Manual gearbox / Engine capacity 5861 cc / 130 kW Gkodpfx Aowt Aw Eeb Ajf Gross vehicle weight: 13,000 kg Payload: 5,400 kg Wheelbase: 5,200 mm Platform: 6,240 mm (flat section) + 900 mm inclined section x 2,500 mm wide - Platform height: 1,050 mm - Hydraulic ramps, 1,900 mm long, width adjustable Crane: AV V706 2S

Condition: used, mileage: 596,361 km, power: 265 kW (360.30 HP), fuel type: diesel, color: red, fuel: diesel, brakes: retarder, gearing type: automatic, Year of construction: 2014, Equipment: retarder, = Additional Options and Accessories = - Retarder - Power Take-Off (PTO) = Notes = MAN TGS 26.360 6x2 Year: 2014 Mileage: 596,361 km Automatic transmission Unladen weight: 12,295 kg Payload: 13,705 kg Gross vehicle weight: 26,000 kg Axle load capacity: 1: 8,000 kg 2: 11,500 kg 3: 7,100 kg Multifunction steering wheel Retarder/Intarder Audio display with Radio, CD, and Navigation Air conditioning Auxiliary heater Wheelbase: 1-2: 5,000 mm 1-3: 6,350 mm Heated seats Full air suspension Electrically operated windows and mirrors 3rd axle lift + steering axle Winch Stainless steel toolboxes Rockinger trailer coupling 2-way hydraulic ramps: - Length: 2,350 + 2,200 mm - Hydraulically operated from left to right Loading platform dimensions: L: 8,450 mm W: 2,500 mm H: 1,050 mm Tyres: 1: 385/55R22.5 60% 2: 315/60R22.5 80% 3: 315/60R22.5 80% Gkodexyhy Nepfx Ab Aef German truck! ID No.: 482 The General Terms and Conditions of Heinhuis apply to all advertisements, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of them. Our prices are net export prices. = Additional Information = Year of manufacture: 2014 Unladen weight: 12,295 kg Payload: 13,705 kg Gross vehicle weight: 26,000 kg Price: On request = Company Information = For more information: WhatsApp:

Condition: new, empty load weight: 10,600 kg, maximum load weight: 35,400 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,540 mm, loading space height: 940 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Loading area: -Loading area in extendable design -Loading area with hardwood planks with rear bevel of approx. 500 mm x 8° -2 pairs of lashing rings (LC 5,000 daN) -1 pair of lashing rings (LC 10,000 daN) -6 pairs of lashing rings that can be folded outwards (LC 5,000 daN) -3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) -Cutouts in the outer frame of the loading area for attaching tensioning straps Braking system: -Braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: -First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer -A high-quality 2-component (2K) top coat in a single color in Nova gray -Rear section metallized and in Painted RAL 9010 (pure white) -No metallic paint possible Seatposts: -JOST seatposts (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: -Steel construction made of high-strength fine-grain steel -Steel grades: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) Electrical system: -Electrical system in accordance with EU regulations, LED lighting 24 volts -2x 7-pin & 15-pin sockets Axles and tires: -BPW axles, air-sprung, with disc brakes (377 mm), with lifting/lowering function -Hydro-mechanical forced steering -Axle tool -Twin tires 235/75 R 17.5 Accessories included: Gkedpfxel Ux Rwj Ab Ajf -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks with bracket -2" king pins -A galvanized steel front wall approx. 1600 mm high -White reflector tape in accordance with EU regulations on the side, on the extension and red at the rear -Loading area with strong hardwood floor -Steering from the front and rear using a cable -Remote control operated via push buttons, with alignment control of the axles -With radio remote control for the steering -9 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area. -Galvanized folding supports under the slope of the loading area -Movable mounting rail for aluminum docking ramps at the rear of the vehicle -European reflector signs (red-yellow) at the rear of the trailer -A mud flap at the rear of the trailer -A bracket for a rotating beacon at the rear of the trailer -A bracket for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -A tool box INOX 1,500x390x810 under the loading area on the right in the direction of travel -Central lubrication system BEKAMAX (Pico) with normal grease NLHI-2 and removable protection around the pump -6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2 x 20ft container or 1 x 40ft container, an additional locking point is provided in the pull-out for a 45ft container -4 pairs Stake pocket strips, mounted transversely in the loading area, for 100 x 50 mm stakes -Lift axle on the front axle with control by TEBS -A dependency on the current axle load and the current loading status -Speed sticker 80 km/h at the rear and on both sides -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm with an LED position light -A holder for a rotating beacon on the warning signs -Load pressure gauge for determining the axle loads including load diagram -HRM metallization (high resistance metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZIN

Condition: excellent (used), mileage: 392,860 km, power: 353 kW (479.95 HP), first registration: 06/2021, fuel type: diesel, color: white, axle configuration: 6x2, fuel: diesel, wheelbase: 4,800 mm, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space width: 2,500 mm, loading space length: 8,140 mm, Year of construction: 2021, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, retarder, soot filter, spoiler, traction control, = Additional Options and Accessories = - 6x6 - Distance cruise control - AdBlue - Adaptive cruise control Gsdpoxxtptsfx Ab Askf - Aluminum fuel tank - Trailer hitch - Heated mirrors - Roof spoiler - Differential lock - Electric windows - Electrically adjustable exterior mirrors - EURO 6 - Closed cab - Speed limiter - Lift axle - Intarder - Refrigerator - Steering axle - Air suspension - Air-suspended seats - Fog lights - Original paint - Particulate filter - Radio/CD player - Sleeper cab - Side skirts - Sun visor - Lane departure warning system - Stability control - Auxiliary heater - Independent air conditioning - Toolbox - Central locking = Remarks = DAF XF 480 FAR Super Space Cab First registration: 21-06-2021 392,860 KM Super space cab Refrigerator Air conditioning / Stationary heater Front + rear air suspension Retarder Adaptive cruise control 2 beds Dimensions: Cargo bed horizontal section 630CM, cargo bed sloped section: 184CM, ramps: 255CM, driving height: Top condition = Further Information = Technical information Number of cylinders: 6 Engine displacement: 12,902 cc Gross vehicle weight: 26,500 kg Drivetrain AdBlue system: Yes Fuel tank: 620 liters Transmission Gearbox: 12-speed automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Max. axle load: 7,500 kg; Steering; Tire tread left: 80%; Tire tread right: 80% Middle axle: Differential lock; Max. axle load: 11,500 kg; Tire tread left: 50%; Tire tread right: 50% Rear axle: Lift axle; Max. axle load: 7,500 kg; Tire tread left: 50%; Tire tread right: 50% Condition Technical condition: very good Optical condition: very good Damages: none Further information Contact John Hesselink or Christel Hesselink for more details. = Company information = Would you like to finance this vehicle? No problem. We can quickly arrange a favorable lease contract for you with terms of 12, 24, 36, 48, or 60 months. All photos and more information can be found at or contact us directly.

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, loading space width: 2,550 mm, loading space length: 9,000 mm, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, 4-axle Volvo machine carrier/working platform transporter – FH 500 8x2R – Trailing axle, electro-hydraulically steered, single tires – Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle – Safety long-distance driver's cab FH – Cab heater, 2 kW – 33 l refrigerator with freezer compartment under the bunk – Air suspension on front axle(s) – Gearbox/I-Shift operation from the driver's seat control unit – I-Shift driving modes: Standard, Performance and Economy – I-See with map-based topography and traffic information – Eco cruise control (cruise control), including brake cruise control – Manual shifting in automatic mode possible (incl. kickdown) Adaptive traction control – Distance-regulating cruise control (ACC) with collision warning and emergency braking function – Lane keeping assistant – Side collision avoidance and turn assist (both sides) – Driver alertness system, warns of fatigue * VEB Volvo Engine Brake * etc. WIESE body for platform and construction machine transport with hydraulic loading ramps with 2 pairs of wheel recesses incl. covers Body dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height approx. 1,050 mm unladen (top of floor) - Stable, weight-optimized steel welded construction, space-efficient design - Short cross member spacing for high point loads - Chamfered rear for low ramp angle - Outer frame profile 90° - Bulkhead in reinforced design - Storage box inside, below the bulkhead - Grating floor - Designed for 5,000 daN wheel load - Steel toolboxes above the axles and anti-slip coating on outer frame Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into outer frame - Longitudinal beams with Multi-X contour full length with numerous 2.5 t lashing points - 4 lashing eyes 8 t at rear (left/right/center/center) - 4 lashing eyes 8 t in front of bulkhead (left/right/center/center) - Outer frame profile 90° Ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps designed as 2 single/extended ramps, both ramps laterally adjustable - Ramp can be used as a loading ramp or crossover ramp for warehouse equipment (extension remains closed); the fixed part is placed on the warehouse ramp - Sturdy tension bar for transport security (optionally with strap tensioning) - 2 hydraulic rear supports with plates, warning sound and indicator in cab - Ramp and support driven by electro-hydraulic system - Control via radio remote as well as emergency operation at control block - Control block mounted in stainless toolbox mounted laterally on frame - Superwinch 8.2 t with approx. 20 m steel cable - Access with handrails right and left for loading area access - 5 stainless steel toolboxes in drawer design, incl. lighting - Side panels as per sample images (green vehicle) - Body coating KTL - Tow coupling with ball head at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted at top of bulkhead Gkedpjw Itmlofx Ab Aef - 4 LED work lights outside on frame for area illumination - 2 LED work lights at rear - 1 removable beacon at rear The stock vehicle is supplied with a white cab and superstructure in nova gray (external frame lacquered in RAL color of choice on request) Further information upon request.

Condition: new, empty load weight: 8,490 kg, maximum load weight: 40,510 kg, overall weight: 49,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, tire size: 245/70 R 17,5, color: grey, operation weight: 8,490 kg, Equipment: ABS, Chassis: - Sturdy welded steel frame construction with front frame kick-up and flat loading area with rear bevel approx. 500x100 mm - 200 mm gooseneck with chamfered corners - Sloped end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of rear slope) - 2 king pin positions with interchangeable 2” king pin - Outer frame closed to the outside as perforated outer frame for lashing with tension straps - Reinforced frame design / concentrated load at center of gravity - Provisions for extendable widenings in the loading area - With excavator trough (without cover), approx. 220 mm deep, approx. 600 mm wide, starting approx. after 2nd axle up to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), approx. 400 mm deep, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Underrun protection = extended rear closing plate - Drop-leg supports at rear Floor: - 35 mm larch wood floor with aluminium omega profiles Axles, Steering, and Tires: - BPW air suspension axles, 10 tons axle load each, bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device with total lift approx. 200 mm - 2nd ride height via ball valve +50mm - 1st axle as lift axle (wired via EBS), confirmation fully automatic with mechanical emergency activation via push button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with offset centered - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Brake System: - Two-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-actuated parking brake - Air connection yellow/red Paintwork: - Steel shot blasting, chassis spray-galvanized and primed - Paintwork chassis/wheel hubs/outer frame in DB 7350 Novagrey Accessories: - Removable side boards and rear wall on gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminium underrun protection - 4 wheel chocks - Sheet metal mudguards with Clear-Pass - Elongated license plate holder in closing plate - 1 plug-in ECE plate at the rear - 11 pairs ZK modules 10t, mounted laterally: - 2x on the gooseneck - 9x on the loading area Gkjdpswu A Sljfx Ab Aef - Without rear towing eyes - Extendable warning signs incl. 3 position lights each, mounted at the front on landing gear and at rear before closing plate, infinitely extendable up to a loading width of 4,500 mm - 4 plug-in holders for warning signs in stake pockets on the loading area - 6 pairs of lateral stake pockets for insertable stakes 100x50 mm - 2 rows of transverse stake pockets for insertable stakes 100x50 mm on gooseneck from outer frame to main frame (1x before and 1x after king pin positions) - 3 rows of transverse stake pockets for insertable stakes 100x50 mm on loading area from outer frame to main frame (1x front, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in the loading area with container locks for one 20ft container - Rubber skirt mounted on underrun protection - Preparation (=cable routing for NATO cable and hole pattern for subsequent installation of NATO socket at the front of the closing plate as well as holder on the vehicle) for later mounting of electrohydraulic unit on the right rear in direction of travel for potential operation of drive-on ramps - Mechanical 24t landing gear with single-side operation and load compe

Condition: excellent (used), mileage: 566,357 km, power: 240 kW (326.31 HP), first registration: 04/2016, fuel type: diesel, axle configuration: 6x2, fuel: diesel, wheelbase: 6,700 mm, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space width: 2,510 mm, loading space length: 7,640 mm, loading space height: 2,580 mm, Year of construction: 2016, Equipment: ABS, air conditioning, cruise control, low noise, spoiler, = Additional Options and Equipment = - Aluminum fuel tank - Roof spoiler - Differential lock - Electric windows - Electrically adjustable exterior mirrors - Remote central locking - Heater - Refrigerator - Air suspension - Air horn - Oven - Sleeper cab - Sun visor - Central locking = Remarks = XLRASM40G099224 = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 837 cc Drivetrain AdBlue system: Yes Axle Configuration Maximum front axle load: 9,000 kg Rear axle 1: Max. axle load: 11,500 kg Rear axle 2: Lift axle; Max. axle load: 7,500 kg Dimensions Dimensions (L x W): 15 x 255 cm Weights Unladen weight: 11,760 kg Payload: 16,240 kg gross vehicle weight (GVW): 28,000 kg Gksdpewkkavsfx Ab Ajf Functional Sliding roof: Yes Condition Technical condition: Very good Visual condition: Very good Identification Registration number: 41-BHF-5 Further information Please contact Sales for more information. = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the provided information. Office Phone: MOB: Dutch - English - German - French - Spanish - Italian (Available via WhatsApp and Viber) MOB: Dutch (Available via WhatsApp and Viber) When you pay by bank transfer, the money must be transferred to our bank account as listed below. Always verify the payment details stated on our website. If you receive different information, please contact us. If in doubt, please call us to verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U