Swap body semitrailer

KRONE BOX LINER SZC 18 ADR-CHASSI FüR 20FT CONTAINER, 1-A LIFTACHSE

Condition: new, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2026, 3-Axle MULTIMAX "PLUS" semi-trailer, air-suspended and with hydraulically forced steering axles. Technical data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h (legal) Total weight: 49500 kg / 31500 kg Fifth wheel load: 18000 kg Axle load: 31500 kg / 31500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Kingpin offset to rear approx.: 2,100 mm Fifth wheel height loaded approx.: 1205 mm Platform length approx.: 9,600 mm Extendable by approx.: ? Platform width approx.: 2,540 mm Loading height at max. load approx.: 890 mm Suspension travel approx.: -55 / +145 mm Axle spacing: 1,360 mm Total weight dependent on fifth wheel load: Yes Special permit required if exceeding country-specific regulations. Technical description Gooseneck: Gooseneck in SNT design to optimize platform length, length approx. 3,900 mm, rear with a bevel of approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor-trailer combinations: 4 x 2 and 6 x 2. Platform: Platform, length approx. 9,600 mm with a bevel at the rear of approx. 900 mm x 6°. Platform behind the gooseneck can be hydraulically raised and lowered, length approx. 3,000 mm, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS A pair of two-piece AXS steel ramps with a length of approx. 4,920 mm and a width of approx. 900 mm. Open grating deck. Hydraulically folding ramp ends. Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 365 mm. Maximum load and angle of inclination according to technical data sheet: C470319 Maximum inclination angle with lowered platform: 9° Axles and suspension: BPW axles and suspension, all axles hydro-mechanically forced steered. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve. Axle tool. Tires: 235/75 R 17.5 3PMSF, twin tires. Manufacturer according to our choice Load index 143/141J (144/144F) Braking system: Braking system of the brand WABCO EBS-E according to EU regulations. Without connection cable to the tractor unit. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" design according to EU regulations. (ASS 3) Metallization: Complete HRM metallization (High Resistance Metallization) Complete steel structure shot-blasted, then hot-dip galvanized with ZINACOR 850 (Zinc 85% - Aluminum 15%). Painting: 6-coat finish: Complete steel structure shot-blasted after welding. 1 coat of zinc-based primer, 1 coat of adhesion primer. Top coat with 2 coats of 2-component paint (acrylic), solid color in RAL colors of your choice, followed by sealing of the cavities with special wax. Rims in silver. Multi-color and special paint finishes available at an extra cost. Steel structure: Steel structure made of high-strength fine-grain steels. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders tested according to DIN-EN 287-1. Welding process MAG according to EN ISO 4063. Njdjizu Ntepfx Akcscw Protective gas M21 according to EN ISO 14175 Front wall made of steel, plug-in, approx. 400 mm high Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the connection strip at the front with sockets 24N, 24S & 15-pole. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pole connection according to ISO-12098 If your pin assignment differs from the ISO connection standard, please inform us. "Anderson" socket on the connection strip at

Condition: used, Year of construction: 2016, operating hours: 3,410 h, power: 190 kW (258.33 HP), next inspection (TÜV): 07/2028, Equipment: air conditioning, all wheel drive, Internal vehicle number: FG50320 Available immediately at our yard in Kaufungen. More information can be found at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Never registered. Financing example: * Internal number: Tractor * Purchase price: 72,000.00 € * Down payment: 10% * Term: 60 months * Monthly payment: 1,100.02 € Njdpfoytlldox Akcjcw Residual value: 14,380.00 € If you are interested in this offer or would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to hearing from you. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: excellent (used), functionality: fully functional, Year of construction: 1979, operating hours: 4,336 h, power: 33 kW (44.87 HP), gearing type: mechanical, fuel type: diesel, maximum speed: 30 km/h, first registration: 11/1979, color: green, overall weight: 2,600 kg, front tire size: 7.50-16SL, rear tire size: 14.9/13-30AS, total height: 2,354 mm, total length: 3,670 mm, total width: 1,726 mm, Equipment: additional headlights, cabin, front-end loader, hydraulics, lighting, trailer coupling, VERY WELL-MAINTAINED Fendt Farmer 102 S Turbomatik, water-cooled MWM engine, 3096 cc displacement, 45 hp, hydraulic steering, overdrive transmission, canopy, original Fendt front loader with forks and bucket, original paint, low mileage, and many accessories. PLUS • Front loader with forks & bucket • Single-axle trailer • Snow chains • Log grapple • Additional rear weight • 2 spare front tires & rims • Radio Ncedpfezhl Itsx Akcjw • Spare fuel canister • Etc. Engine & Transmission • Manufacturer/Type: MWM D 325-3 • Power: 45 hp at 2300 rpm • Cylinders: 3 • Displacement: 3,096 cm³ • Transmission: Fendt group transmission with 13 forward and 4 reverse gears • Maximum speed: 30 km/h Dimensions & Weight • Curb weight: approx. 2,600 kg • Length: 3,625 mm (rear wheel) / 3,670 mm • Width: 1,706 mm (rear wheel) / 1,726 mm • Height: approx. 2,320 mm to 2,354 mm (with canopy/cabin) • Wheelbase: 2,083 mm (rear wheel) / 2,118 mm Hydraulics & PTO • PTO speeds: 540 rpm • Lifting capacity: Up to 2,000 kg rear lifting capacity HP (kW) 45 hp (33 kW) Operating hours 4,340 hours Year of manufacture 07/1979 First registration 07/1979 Seller private Type of machine Tractor Manufacturer Fendt Model 102 S Available from now Drive Rear wheel drive Row crop tractor yes Number of gears f. 13 Number of gears r. 4 Tire-r 14.9/13-30AS Tire-f 7.50-16SL Transmission Mechanical Front loader technology hydraulic Number of cylinders 3 Work light rear Halogen Number of work lights rear 1 Drawbar coupling yes 7-pole socket front yes Height-adjustable trailer coupling yes Upper link manual

Condition: used, functionality: fully functional, mileage: 268,351 km, power: 63 kW (85.66 HP), fuel type: diesel, empty load weight: 1,607 kg, maximum load weight: 843 kg, overall weight: 2,600 kg, Year of construction: 2008, READY TO DRIVE, inspection (Pickerl) expired Nodpfexznv Hex Akcjcw

Condition: used, Year of construction: 1976, power: 21 kW (28.55 HP), fuel type: diesel, Three-point / rear hitch, two-wheel_____Fully functional. Proof of ownership (purchase contract), storage location: 17094 Pragsdorf. Nodpfxjv Ddzzs Akcjcw

Condition: new, maximum load weight: 36,980 kg, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,440 mm, Year of construction: 2023, Equipment: ABS, Vehicle Type: MFCC central-rear sliding container chassis for containers with central and rear extension. Chassis suitable for accommodating 1x40ft standard container without gooseneck design. Chassis suitable for accommodating 1x20ft containers flush at the rear; fifth wheel load depends on load distribution! Chassis suitable for accommodating 1x40ft High Cube container in gooseneck design. Chassis suitable for accommodating 2x20ft containers. Chassis suitable for accommodating 1x30ft standard container without gooseneck design. Njdpfott Hu Ajx Akcocw Chassis suitable for accommodating 1x45ft containers. The chassis can be simply extended or retracted by driving the tractor unit forward or backward, requiring no manual force from the operator and ensuring operational safety. Lift axle. Multiple units available. Rental possible!

Condition: new, Year of construction: 2026, Equipment: all wheel drive, Mecalac 6 MCR > New machine Nedpfoy Aqtgjx Akcscw > Approx. 5,800 kg operating weight > Water-cooled 4-cylinder Deutz diesel engine with 55.4 kW / 75 hp output > Travel speed 10 km/h > Rubber tracks > Adjustable boom > Articulated boom > 2x proportional auxiliary hydraulic circuits on the joystick > Dozer blade > Rear-view and side cameras > Refueling pump > Air conditioning (AC) > Rotating beacon > Work lights > Central lubrication system BEKAMAX > Powertilt with Lehnhoff HS03 quick coupler (hydraulic) > Air-suspended driver's seat > Radio > 1x ditch cleaning bucket 1400 mm rigid > 1x digging bucket 400 mm with teeth > 1x digging bucket 800 mm with teeth Transport? No problem!

Condition: used, mileage: 239,800 km, first registration: 09/2005, fuel type: diesel, overall weight: 2,300 kg, next inspection (TÜV): 09/2024, color: green, gearing type: mechanical, emission class: euro5, number of seats: 2, Year of construction: 2005, Equipment: ABS, Everything is fine Njdpfx Akjyd T Hqscocw

Condition: new, maximum load weight: 38,290 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,520 mm, Year of construction: 2026, * TS 3 Profile 30.0: ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard operating box mounted on the trailer as an info tool, with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * LED rotating beacon (removable), mounted rear left ----General Attachments: * Side underrun protection * Support legs in front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder mounted underneath the chassis, right side ----Low Loader Platform: * Fifth-wheel platform with 45° chamfered front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with hinged lid * 400 mm high drop-side aluminum boards (RAL 9010 pure white), foldable and removable, along the platform sides * Rear wall insert – 150 mm high * Rear slope on the platform to the low bed, approx. 700 mm long * Fifth-wheel platform with 50 mm timber floorboards, and low bed platform with 60 mm timber floorboards * Checker plate over the axles Ncsdpfxjl Tnvge Akcew ----Widenings: * 8 x mechanical fold-out width extensions to achieve a total width of 3 m (excluding the rear slope); extension boards included with storage on the platform * Mechanically adjustable warning panel sets at front and rear ----Load Securing (Lashing Package): * On the platform, 2 x 6.3 t lashing rings each side, plus 3 x 5 t lashing bars in the outer frame on each side * On the low-bed platform, each side: 2 x 13.4 t lashing rings; plus 4 x 10 t folding and retractable lashing rings recessed in the outer frame * Each side: 2 x 6.4 t lashing eyes, plus one lashing ring at the rear in the excavator arm recess * 2 x container locks immediately after the gooseneck in the low-bed platform ----Excavator Arm Recess: * Continuous excavator arm recess from end of last fixed axle over the steering axle up to the rear cross member, with internal reinforcement, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Single-piece, hot-dip galvanized mechanical-hydraulic loading ramps approx. 3,000 x 720 mm (mechanically adjustable laterally) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer plank of the ramp made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in trailer (for hydraulic pump capacity in truck over 40 up to 120 l/min) ----Loading Dimensions: * Fifth-wheel platform load area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen load height approx. 910 mm (incl. 860 mm approach slope) ----Fifth-Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear folding supports, widening consoles hot-dip galvanized * Axles, support legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer warranty * Subject to error and prior sale * Sample images may show equipment not included with the offered vehicle ----Delivery Time: * Available from calendar week 38/2026

Condition: new, functionality: fully functional, empty load weight: 855 kg, maximum load weight: 2,645 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 5,660 mm, loading space width: 2,090 mm, total length: 7,860 mm, total width: 2,280 mm, suspension: other, tire size: 195/55R10C, trailer brake: trailer braked, TEMARED Carkeeper 5820/3-P ALU 3500 kg - > Aluminum panel floor NEW VEHICLE Car transporter, high-loader, tri-axle with full floor and hydraulically tiltable load platform Njdswu Dbhjpfx Akcscw Technical data: Permissible total weight: 3500 kg Unladen weight: approx. 855 kg Payload: approx. 2645 kg Loading area dimensions: 566 x 209 cm Overall dimensions: 786 x 228 cm Tyres: 195/55/10 - tri-axle Loading height: approx. 55-56 cm Features and construction: Tri-axle high-loader with hydraulically tilting body Full floor with aluminum panels Continuous drive-on ramp, retractable license plate holder Maintenance-free rubber suspension axles V-drawbar, support wheel as standard Overrun brake with reverse automatic Frame welded and hot-dip galvanized Side-mounted winch, deflection pulley, winch support with 3 guide points Flip-out multifunction lights with quick release, front marker lights Electrics 12V, 13-pin plug, reversing light Optional accessories: Spare wheel Wheel straps Anti-theft protection, various types etc. (please enquire) ! Many more trailers at >>> trelex. de ! * Financing and trade-in possible! * Huge selection: Over 300 trailers in stock at all times, come visit us! * Professional and fair advice, fast processing. * Questions? Just call us! ATTENTION: Collection without pre-order not possible!