Open semitrailer with tarp

ORTHAUS * SAF-ACHSEN * 107 m3 * SPECIAL * PLANE *

Condition: new, empty load weight: 6,100 kg, maximum load weight: 14,400 kg, overall weight: 20,500 kg, axle configuration: 1 axle, suspension: air, tire size: 245 70 17,5, KALEPAR TRAILER - KLP 119V4 4-CAR AUTO TRANSPORTER Car transporter semi-trailer for 4 vehicles 1x SAF or BPW axle Gross vehicle weight: 20,500 kg Payload: 14,500 kg Unladen weight: 6,100 kg Overall length: 13,600mm + 1500mm Braking system: Wabco 2S-2M Electrical system: Aspöck Systems Air suspension Hydraulic rear extension with full width of 2550mm and length of 1500mm Semi-trailer completely galvanized (100% galvanized) Tire size: 245/70 R 17.5 Tire brands: Pirelli, Goodyear, Fulda, Continental. Fifth wheel height: approx. 950mm - 1150mm (other fifth wheel heights also possible) Hydraulic winch 5 tons with remote control and pulleys 24V 4.5KW electric-hydraulic motor Steel ramp: 2 pieces Bdjdpfjkqmumjx Agmoh Modifications possible according to customer requirements. Paint color can be freely selected / free of charge. Net export possible. All documents (COC, TÜV, etc.) available for registration.

Condition: new, empty load weight: 11,000 kg, maximum load weight: 27,000 kg, overall weight: 38,000 kg, axle configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,550 mm, tire size: 235/75 R17.5, color: grey, operation weight: 11,000 kg, Equipment: ABS, Chassis: - Steel frame welded construction with front and rear frame extensions and a low-bed without a rear slope - Frame neck + kingpin plate 225 mm Bjdpfoiu Eu Nex Agmodh - Low-bed designed for a point load of 25 tons over 5 m - Outer frame closed on the outside with welded lashing rings for securing cargo - Interchangeable 2" kingpin - Rear mounting rail for aluminum ramps Axles and Tires: - BPW low-loader axles, 10 tons axle load each, air spring diameter 360 mm - Air suspension with lifting and lowering device, stroke 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for 2 coupling heights + 100 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - IVTM tire pressure monitoring system - 9 tires 235/75 R 17.5, tubeless Steering: - 1st and 2nd axles hydraulically steered via the fifth wheel coupling Floor: - Multi-layer glued panel floor with a thickness of 27 mm, flush with the outer frame and longitudinal beams - Reinforced underneath with GRP coating - 12 pairs of lashing rings welded into the outer frame (8 pairs RUD 8 tons – 6 pairs in the low-bed and one pair each on the gooseneck and at the front of the rear section – 2 pairs of lashing rings 4 tons on the gooseneck and rear section) - 6 pairs of mushroom-shaped load securing points in the outer frame in the low-bed - Storage compartment with lid in the floor of the low-bed, front left and right Front Wall: - 25 mm aluminum hollow profiles extending up to the lower edge of the roof with integrated tarpaulin tensioning device Sliding Tarpaulins: - Sliding tarpaulins on both sides with welded vertical and horizontal straps (spacing approx. 600 mm) and stainless steel tensioning closures - Adjustable tarpaulin straps (over center) up to a loading width of 4,000 mm, including tarpaulin extension with snap buttons and Velcro - Tarpaulin extension in the direction of travel: 300 mm, in height: 750 mm - Incl. eyelets for a loose tarpaulin extension part - 1 pair of vertical tarpaulin pockets with a length of approx. 1,000 mm, position in the low-bed at the front extension - With strap pockets Rear Wall: - Steel rear portal frame with lateral tarpaulin mounting device - Aluminum double-wing door, 25 mm thick - Both door wings can be fully folded in with door latch - One aluminum double-hinge hinge and two recessed handle recesses per door wing Front Corner Posts: - At roof height, screwed on at the front end Intermediate Posts: - 3 pairs of steplessly adjustable folding posts - The posts can be moved along the entire length using roller carriages - Intermediate posts can also be fixed in the rear platform in the low-bed Roof: - EDSCHA sliding tarpaulin (galvanized) with crossmember that can be moved in both directions (pushed forward together in the loading area) - Rear portal crossbar can be swung out - PVC tarpaulin roof without customs closure - Manually hydraulic lifting roof on both sides, stroke 450 mm - Lifting roof can be operated in the front (9x50) and rear (9x50) elevated positions - Including tarpaulin extension and tarpaulin rail at the rear - Tarpaulin can be extended by 900 mm at the front end wall Accessories: - Extendable warning signs (removable at the rear and front with socket) incl. position lights up to a loading width of 4,000 mm - Storage of the 4 warning signs on the front wall, inside, top right and left - 1 aluminum ladder with bracket 2,500 mm long on the front wall - 2 rows of aluminum slats self-locking - Sheet metal mudguard

Condition: used, first registration: 08/1998, total length: 16,000 mm, total width: 2,550 mm, Year of construction: 1998, GOLDHOFER STZ-TL 3-33/80 3-axle low-bed (gooseneck) semi low-loader with 3 steering axles, with lowerable platform and hydraulic ramps Bdjdpewpknwsfx Agmjh TRAILER HAS BEEN SANDBLASTED AND PAINTED!! • ABS • 3 x BPW ECO-Plus air suspension axles • 3 x steering axles • lifting/lowering system • hydraulic, 2-part access ramps • hydraulically lowerable platform • extendable to 3 m width • warning signs • NATO connector for the electric/hydraulic pump • overall length: 16,000 mm • empty weight: 15,900 kg • GVW: 48,000 kg (technically possible: 48,000 kg) • payload: 32,100 kg • 4 x axle load gauges • twin tires: 235/75 R17.5 - TÜV / inspection and SP: !! new !! - German vehicle! Subject to errors and prior sale!

Condition: used, mileage: 500 km, power: 324 kW (440.52 HP), first registration: 01/2026, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, total width: 2,550 mm, total height: 3,650 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Chassis MAN TGS 26.440 6x2-4 BL CH EURO6e Engine: MAN D2676 LFAZ, 324 kW, 2,250 Nm torque Transmission: MAN TipMatic 12.26 DD Wheelbase: 3,900mm; 1,350 mm between rear axle and trailing axle MAN Efficient Roll Trailing axle, non-driven, straight, steered, liftable Differential lock on driven rear axle Leaf/air suspension NN cab, basic cab suspension with mechanical roof hatch H7 front headlights LED daytime running lights Fog lamps, H7 cornering lights High beam assistant, automatic driving light control 2x LED beacons MAN OptiView mirror package, digital mirror replacement system Driver comfort seat, air-sprung with seat heating Passenger seat unsprung Multifunction steering wheel 12.3-inch instrument cluster Climatronic air conditioning Auxiliary heater ACC Stop & Go cruise control MAN Professional Media System navigation 12.3-inch MAN sound system Trailer coupling (to be installed) FFG elephant vacu 13.002 VSK suction vehicle Tank Material thickness: 6 mm Total capacity: 13,000 l Sludge chamber approx. 11,500 l - Water chamber approx. 1,500 l Tank emptying Free outflow from the rear-tilted body Via hydraulic rear tilting, total tilt angle approx. 20 - 25° Via hand valve and multi-stage hydraulic cylinder With pressurization by vacuum pump Suction-pressure pipes laid over tilting rotation point Water chamber * Filling Filling line system in DN 50 with ball shut-off valve Coupling connection - Storz C Free-run device according to drinking water regulations Overflow from hydrant filling led under the vehicle Pneumatic shut-off flap to prevent splashing during driving * Emptying Cleaning/emptying connection DN 50 with shutoff fitting and Storz C coupling Emptying flap Top-hinged, externally reinforced full door, opening over entire tank cross-section at rear Hydraulically opens upward, with hydraulic locking Manual control valve for opening/closing within view Suction and emptying nozzles Located in upper and lower part of emptying flap, each DN 100 with manual ball valve Sampling tap Perrot coupling V-piece with dust cap Sludge chamber fill control Float indicator with additional rotary sensor for electronic measurement Float located in center of tank for more accurate measurement when vehicle is tilted Digital display at operator station in 100-liter increments Vacuum pump Make: Gardner Denver Wittig RFW 200 Suction capacity: max 1,250 m³/h (free flow) Drive power: approx. 45 kW Pipework DN 100 Vacuum pump drive via PTO with cardan shafts and V-belt drive Suction hose reel Installed on tank lid, hydraulically driven with rotary union Shut-off gate and rotary union in DN 100 Designed for 50 meters suction hose DN 80 High-pressure pump Make: Speck Type P 45 - 75/180 G Pump capacity approx. 75 l/min at 180 bar (nozzle pressure approx. 150 bar) Drive power approx. 28 kW Piping DN 13 including fittings High-pressure hose reel Fixed at rear, hydraulically operated 80 m DN 13 Bedpfxoymudco Agmodh Spray gun lance 500 mm Operator station integrated in equipment box Radio remote control (compact version) Equipment boxes Hose trough Rear vehicle camera Hand wash station with heating 5x LED work lights 1 flashing beacon mounted at rear We, the Lower Saxony Commercial Vehicle ...

Condition: good (used), mileage: 128,232 km, Year of construction: 2014, operating hours: 14,003 h, Manufacturer: Terex Demag Bdedpfx Aoyr Iz Sogmeh Type: AC 40-1 City Year: 2014 Capacity: 40 t Main Boom: 31.2 m Kilometers: 128,232 km Crane operating hours: 14,003 h Optional jib: 13 m Runner (assembly jib): 1.2 m

Condition: used, machine/vehicle number: ZCFA75D030252xxxx, mileage: 42,303 km, Year of construction: 2008, Please provide reference number upon request: 23918 Specifications: Model: 2008 KM 42303 Type: Repair object Approval: Not EU approved Defects and issues: Yes Horsepower: 177 hp Drive: 4x2 Emissions: Euro 4 Transmission: Manual Interior length of platform: 5.300 m Interior width of platform: 2.531 m Tires: See pictures Suspension: Air suspension Lights: Yes Functionality: Starts and runs Emergency mode: Yes Tool cabinet: Yes Radio: Yes Bjdpszqliisfx Agmjdh Specifications for crane: Model: 2007 Certification: Not certified Type: Repair object Extendable system: 3 hydraulic, 1 manual Stabilizers: Yes Ready for delivery: Yes Description: We have a 2008 Iveco 75E18 4x2 crane truck with Hiab 055XS D3 crane for sale as a repair object. The vehicle runs in emergency mode but can be started and moved. There are defects and issues, and some cost for repairs must be expected. The vehicle is sold as is, without any form of warranty. Ready for delivery. Km: 42303 HK: 177 Technical approved: no EU-approved until: 18.03.2023 Own weight: 5260 Total Weight: 7500 Payload: 2165 Width: 255 Length: 787 Kw: 130 Euro: 4 Model: 75E18 4x2 kranbil m/ Hiab 055XS D3 kran Rep.Objekt Gearbox: Manual = More information = Please contact ATS Norway for more information

Condition: used, lifting height: 30,500 mm, Year of construction: 2018, operating hours: 1,150 h, Unladen weight: 13,700 kg Bdedpfx Agjzq Rfvemsh Lifting capacity: 15,500 kg Dimensions of the cargo area: 583 x 184 x 283 cm Serial number: AMC3739 Condition of front tires: 0 Condition of rear tires: 0 Please contact PFEIFER GROUP for further information.

Condition: used, mileage: 738,234 km, power: 324 kW (440.52 HP), first registration: 07/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: green, gearing type: mechanical, emission class: euro5, Year of construction: 2012, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Crane tractor unit SZM MAN TGX 26.440 6X2 Euro5 eev Retarder with dual-circuit hydraulics Bdodponwggpefx Agmsh Semi-trailer Meusburger MPS-2 steered axles with crane Palfinger PK 26002-EH 4 extension, 4m 5500Kg, 12m 1750Kg radio controlled Condition: very good Service maintained, TÜV Tires: 70-95%

Condition: excellent (used), mileage: 232,089 km, power: 124 kW (168.59 HP), first registration: 03/2016, fuel type: diesel, wheelbase: 3,450 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro5, total width: 2,000 mm, permissible axle load (axle 1): 2,100 kg, permissible axle load (axle 2): 2,800 kg, Year of construction: 2016, Equipment: ABS, air conditioning, = Additional options and accessories = - Power take-off (PTO) - Speed limiter = Remarks = Crane Number of hydraulic extensions: 3 = More information = Technical information Number of cylinders: 4 Engine capacity: 2.998 cc Bodpfx Aezucfiogmsdh Max. front axle load: 2100 kg Max. rear axle load: 2800 kg Weights Empty weight: 2.030 kg Carrying capacity: 1.470 kg GVW: 3.500 kg Max. towing weight: 9.380 kg Functional Dimensions of cargo space: 790 x 230 cm Crane: Amco-Veba V103.38, year of manufacture 2016 Height of cargo floor: 100 cm Interior Number of seats: 2 Maintenance, history and condition APK (MOT): tested until 01/2027 Technical condition: very good Visual appearance: very good Financial information Price: On request VAT/margin: VAT qualifying Identification Registration number: VT-037-J = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: used, maximum load weight: 33,707 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2025, next inspection (TÜV): 09/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2025, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "EXTREME" Rock Tipper First registration: 09/2025, Condition: NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered width design) Unladen weight: 8,293 kg Z-chassis, cranked design Continuous floor in 6 mm Hardox steel HB450 4 crusher bars evenly distributed along the entire length of the floor, fully welded Front wall and side walls made of 5 mm Hardox steel HB450 Slanted front wall, with internal access Deflector plates along the entire length of the side walls (to protect the mudguards) Hydraulic rear tailgate (with swinging function) HYVA tipping cylinder, type Alpha, suitable for high and low pressure Aluminium landing legs, full-load rated 2x pneumatic vibrators underneath the body SAF axles with large disc brakes, 430 mm Bodpfx Agexriu Eomsdh 1st axle is a lift axle with start-assist WABCO Trailer EBS with roll stability support (RSS) WABCO Smartboard Automatic tipping lowering device Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holder Toolbox on the right side 4x LED reversing lights RENTING is the new BUYING: also available for immediate full-service rental-----