Tipper semitrailer

SCHMITZ CARGOBULL 3-achs 55,5 m³ Stahlmulde, Doppelflügeltür

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2024, next inspection (TÜV): 11/2025, Equipment: ABS, Schmitz Cargobull SKI 24 SL 10.5 Scrap Tipper * RENTAL * Scrap tipper 55.5 m3 * SCB axles * Portal doors * Air suspension * Air steering * Lift axle * Roll-up tarpaulin * 3 cross braces for stability * Boost pressure gauge * Automatic lowering during tipping * ISO air connections with red and yellow coupling heads * 2 x 7-pin power connectors * 15-pin power connectors * ABS connection * Platform on the front wall * Folding underrun protection * Disc brakes * LED lights Rental possible! Subject to prior sale and errors! Sold exclusively subject to our terms and conditions. Important notice? Important information: Despite careful review of all details in our offer, errors may occur. These errors are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Njdpfev Ttx Usx Ab Aeku Legal information: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the purpose of contract initiation. The information provided here is provided without guarantee and therefore does not represent any guaranteed properties.

Condition: used, maximum load weight: 33,707 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2025, next inspection (TÜV): 09/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2025, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "EXTREME" Rock Tipper First registration: 09/2025, Condition: NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered width design) Unladen weight: 8,293 kg Z-chassis, cranked design Continuous floor in 6 mm Hardox steel HB450 4 crusher bars evenly distributed along the entire length of the floor, fully welded Front wall and side walls made of 5 mm Hardox steel HB450 Slanted front wall, with internal access Deflector plates along the entire length of the side walls (to protect the mudguards) Hydraulic rear tailgate (with swinging function) Nsdpfoxriu Ejx Ab Aeku HYVA tipping cylinder, type Alpha, suitable for high and low pressure Aluminium landing legs, full-load rated 2x pneumatic vibrators underneath the body SAF axles with large disc brakes, 430 mm 1st axle is a lift axle with start-assist WABCO Trailer EBS with roll stability support (RSS) WABCO Smartboard Automatic tipping lowering device Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holder Toolbox on the right side 4x LED reversing lights RENTING is the new BUYING: also available for immediate full-service rental-----

Condition: new, maximum load weight: 28,840 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,660 mm, loading space width: 2,250 mm, loading space height: 2,350 mm, loading space volume: 50 m³, Equipment: ABS, Example: STRONG & LIGHT, now also available for heavy-duty use, from 40 m³ loading volume and 6,600 kg. STRONG & LIGHT, now also available for heavy-duty use, from 40m³ loading volume and 6,600kg ----Example: high-quality aluminum chassis with high-strength steel trough, REAL 7,160 KG, Chassis with 3x9t axles DCA, with 430mm disc brake, 6x steel rims, 1st axle as lift axle with starting aid, aluminum drop-lift supports (can be uncoupled when loaded), foldable underrun protection, digital loading pressure gauge as axle load indication, tool box, lean-to ladder, Trough made of HB450 steel sheets, floor 5mm, side walls and rear doors made of 4mm HB450 steel sheets, wing doors 1/2 - 1/2 with a grain slider on the right, subsequent unlocking of the rear doors, doors sealed with round steel (sealing with rubber seal possible - mud-proof), roll-up tarpaulin with a pipe in the middle, aluminum mudguard to protect the roof tarpaulin during loading, platform standing on the frame, EdBro tipping cylinder with long cover, loading edge = 3,650mm, (some of the vehicles shown contain special equipment) ----Other equipment points and a detailed vehicle offer are available on request, various loading volumes, vehicle lengths and heights possible, Paintwork and equipment according to customer requirements +500¤ transfer costs Nkodpfehfiqcex Ab Aju ?Offers and images are subject to change ?

Condition: used, maximum load weight: 29,980 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2020, next inspection (TÜV): 08/2026, Equipment: ABS, * Meiller 3-axle steel tipper body * Type MHKS 44/3 Nkedpfjx H Hqcex Ab Aju * Electric sliding tarpaulin * Platform * Air suspension * BPW axles * Lift axle * EBS * ABS

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2016, next inspection (TÜV): 04/2023, loading space volume: 51 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * 1+3 axles, liftable * Air pressure sensors * Pneumatic rear locking * SAF axles with disc brakes * Wabco Trailer EBS-E ----* Sliding tarp * Fire extinguisher * Platform * Toolboxes * Alloy rims ----Vehicle number 6787-----Subject to errors and prior sale-----Advertising and various decals have been digitally removed.----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee: * Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing * Arrangement of financing * Application for export license plates * Vehicle transfer * Vehicle registration YOUR VTS TEAM Nkjdpfx Aevhu Dujb Aeu WhatsApp support available! For questions about the vehicle or further information, feel free to contact us easily via WhatsApp. Whatsapp Whatsapp

Condition: used, maximum load weight: 30,195 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2022, loading space length: 10,600 mm, loading space width: 2,330 mm, loading space height: 2,300 mm, loading space volume: 57 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Steel rear tipping body approx. 57 cbm, double-wing rear door with rotary latch, 2 x grain chutes with covers, roll tarp, loading pressure gauge, HYVA tipping cylinder, JOST landing gears, ABS, EBS, SCB ROTOS axle(s), disc brake system, air suspension with lifting/lowering device, lift axle, automatic lowering of air suspension during tipping, vehicle may be stickered and/or signwritten with advertising, tow coupling SI85889 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops! The vehicle may be stickered and/or signwritten with advertising. Our general terms of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this unit. Njdpfswm T Eyex Ab Aeku Please contact us!

Condition: used, maximum load weight: 32,246 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 13,110 mm, loading space width: 2,400 mm, loading space height: 2,650 mm, loading space volume: 86 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 86 m³ First Registration 04/2025 Internal Dimensions (LxWxH): 13,110 x 2,350 / 2,450 x 2,770 mm (tapered design) Unladen weight: 9,640 kg Floor made entirely of 5 mm Hardox steel HB450 Front and side walls made of 3 mm Hardox steel HB450 Pneumatically folding rear underrun protection Straight front wall, with interior access ladder Rear portal doors 50:50 with pneumatic sequential unlocking Reinforced roof tarpaulin HYVA tipping cylinder, Alpha type, low pressure 2x pneumatic vibrators JOST crank landing gears, full load SAF axles with large 430 mm disc brakes 1st axle: LIFT AXLE WABCO Trailer EBS with RSS roll stability control WABCO Smartboard Lifting and lowering device Automatic tipping lowering function Tyres: 6 x 385/55 R 22.5 Njdpfoygdvhox Ab Aoku ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Left side toolbox 4x LED reversing lights RENTING is the new BUYING – also available immediately with full-service rental.

Condition: used, maximum load weight: 30,910 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2019, loading space length: 10,500 mm, loading space width: 2,360 mm, loading space height: 2,300 mm, loading space volume: 55 m³, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, Schmitz SGF*S3 Schrottkipper Stahl Chassis Hardox Mulde Erstzulassung:13-02-2019 3x Schmitz-Rotos Achsen Liftachse Luftfederung Nsdpfxswpnr Tj Ab Ajku Scheibenbremsen With ABS And EBS Reifen:385/65 R22.5 Approx.60% Serial number:WSK000001305612 Total weight: 39,000 kg, leather weight: 9,090 kg, utility load: 29,910 kg. Arbeitspodest Automatic Absenken Innenmassen Mulde:L-10.50 Mtr.,W- 2.36 Mtr.,H-2.30 Mtr =55 M3 Unterfahrschutz Hinten Annklapbar Irrtümer / Schreibfehler und Zwischenverkauf Vorbehalten

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,350 mm, loading space height: 2,400 mm, loading space volume: 50 m³, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, KEMPF 3-Axle Tipper Semi-Trailer SKM 36/3 SR Membrane ? Steel Half-Pipe Body (50.4 m³) New Vehicle Availability: Expected February 2026 ----Technical Specifications Type: KEMPF SKM 36/3 SR Membrane * Design: 3-axle tipper semi-trailer with steel half-pipe body * Permissible total weight: 36,000 kg * Axle load: 3 x 8,000 kg * Fifth wheel load: approx. 12,000 kg * Loading length: approx. 9,500 mm * Loading width: approx. 2,350 mm * Body height: approx. 2,400 mm * Body volume: approx. 50.4 m³ * Total height: approx. 3,830 mm to the top edge (loaded) * Nominal coupling height: approx. 1,200 mm (technically 1,200–1,260 mm) ----Superstructure / Body Steel half-pipe body in durable off-road design * Material: highly wear-resistant HARDOX steel (HB 450 / HB 500) * Floor: continuous 5 mm HARDOX steel, reinforced * Side walls: 4 mm HARDOX steel * Front wall: 20° inclined, 4 mm HARDOX steel * Rear wall: double-leaf (1/3 left, 2/3 right), grain-tight, with pneumatic 2-hook locking system and integrated slide (400 x 400 mm) * Cover plate: removable, protects slider from dirt and damage * Air vibrator: rear left, operated by switch * Catwalk with ladder and guardrail according to accident prevention regulations (UVV) Nkjdpfx Abexn Ebms Aju * Internal access via step system in the front wall * Shovel and broom holder on the front wall ----Chassis and Superstructure KEMPF welded construction made of fine-grained steel, sandblasted and hot-dip galvanized * Off-road version, conically tapered * Chassis color: Deep Black (RAL 9005) * Body color: White Aluminium (RAL 9006) * Tarp color: Silver (Mehler 911) * Attachments: hot-dip galvanized and black powder-coated * Robust and high-quality overall construction ----Axles, Tyres, and Suspension SAF INTRADISC plus Integral off-road axles with disc brakes (Ø 430 mm) * Axle with automatic lift axle and forced lowering * Tyres: 385/65 R 22.5 (brand according to Kempf's choice) * Rims: Alcoa Ultra ONE aluminum rims, Dura-Bright EVO * Air suspension system with lift/lower function and quick release * Load gauge with scale display at the front left * Chassis laser-aligned (optimized tire wear and fuel consumption) ----Hydraulics and Tipping System HYVA front tipping cylinder, single-circuit hydraulic system (190–250 bar) * Edbro 1" closure coupling, high mounted * Hard-chromed piston, robust design ----Brake and Safety Systems Knorr EBS with RSP (Roll Stability Program) * ABS with 4-channel configuration (4S/2M) and brake light connection * Tire pressure monitoring system in accordance with ECE R141 * Trailer Info Module TIM G2 with brake wear indicator and diagnostic data * Acoustic reverse warning system * Folding underrun protection to ECE R58.03 with spring-assisted lifting ----Lighting and Electrics Complete LED lighting to EC standard, ADR compliant * LED triple chamber lights with chrome rings * LED side markers with indicator function * LED cargo space lighting, operated by switch * LED reversing lights (2 additional side-mounted) * LED rear fog light and license plate lighting * Brake light * 15-pin socket ----Accessories and Extras Two PVC toolboxes (approx. 660 x 500 x 460 mm each) * Removable aluminum ladder (4 m) with holder * Two plastic wheel chocks * Double-sided side underrun protection in accordance with EC regulation * Folding A-plate at the rear of the chassis * Large reflective panel (200 x 1,130 mm) * Mud flaps with spray suppressor * Two aluminum landing legs (load capacity 24 t) ----Tarpaulin and Frame Rol

Condition: used, maximum load weight: 26,653 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2019, loading space length: 10,431 mm, loading space width: 2,333 mm, loading space height: 2,460 mm, loading space volume: 55 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Schmitz Cargobull SKI24 SL10.5 Solid with 55.5 m³ tipper trailer - like new condition ! Steel round body with frame reinforcement Capacity: 55,5 m³, Payload: 26,653 kg, tires: 385/65R22.5, Steel round body (SR) 10.5, height: 2,300 mm, Steel side wall 5 mm (SR 10.5 / 2,300 mm), Side walls made of SCB steel 450 abrasion coefficient => 250KW/mm, dent coefficient => 160J/mm², with center frame on the trough side wall, Steel floor 6 mm (SR 10.5), Floor made of SCB steel 450 abrasion coefficient => 250KW/mm, buckling coefficient => 160J/mm², Steel double wing door, 1 espagnolette lock and side-operated safety lock, Bows for roller tarpaulin, frame reinforcement, Schmitz Cargobull axles, disk brakes, SCB air suspension type MRH-KU35, lift axle, PVC roll-up tarpaulin with tarpaulin wrap profile (board) and side stops, Hot-dip galvanized chassis, underride guard can be folded up, 2x reversing lights LED, ABS, EBS 2S/2M electronic braking system with RSP, EBS power supply via ISO 7638 + CAN, Kingpin replaceable, LED side marker reflector lights, Working platform with access at the front left and ladder for skip entry (for BH from 2,200 mm), Nkodpfjva Scrjx Ab Aju Semi-mounted height unloaded: 1,180 mm