Three-way tipper trailer

MÜLLER-MITTELTAL KA-TA-R 11,9, doppelte Bordwände/ Aufsatz

Condition: new, maximum load weight: 7,500 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,035 mm, loading space width: 2,420 mm, loading space height: 500 mm, total width: 2,550 mm, total height: 1,475 mm, Year of construction: 2026, Equipment: ABS, * Humbaur Three-Way Tipper * HTK 10 50 24 * Year of manufacture: 2026 * Gross weight: 10,500 kg * Payload: 7,500 kg * Unladen weight: 3,000 kg * Overall dimensions: 6960 x 2550 x 1475 mm * Platform dimensions: 5035 x 2420 x 500 mm * Steel side panels: 500 mm high * Continuously height-adjustable drawbar * 10 recessed lashing rings * 2 rear supports * Electrical and pneumatic connections at the drawbar * Storage compartment with 2 aluminium loading ramps integrated into the chassis frame * 8t loading ramps surcharge: €1,499 Itjdpfx Afjqnrtaonoc IMPORTANT! PLEASE READ! We explicitly reserve the right of prior sale since this item is also offered on other platforms. We strongly recommend viewing and inspecting the trailer to avoid any misunderstandings regarding its condition or suitability. Inspections are possible at any time by appointment and are expressly encouraged! Images are for reference only and may show optional accessories for an additional charge. The interior dimensions given are approximate. TRADE-INS POSSIBLE FOR ALMOST ANYTHING! PART EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday–Friday 8:30 am–5:00 pm, Saturday 8:30 am–2:00 pm Always over 500 new and used trailers in stock! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, maximum load weight: 5,600 kg, overall weight: 7,500 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,030 mm, loading space height: 400 mm, total width: 2,200 mm, total height: 1,400 mm, Year of construction: 2025, * Humbaur HTK 754020 Ijdjttfm Hjpfx Afnstc * Three-way tipper * New vehicle * Tandem chassis * Year of manufacture: 2025 * Total weight: 7500kg * Empty weight: 1900kg * Payload: 5600kg * Overall dimensions: 6040mm x 2200mm x 1400mm * Internal dimensions: 4000mm x 2030mm x 400mm * Loading height: 920mm * Steel side walls can be folded down and removed at the sides and rear * Swinging rear side wall with central locking * Height-adjustable drawbar approx. 590mm - 930mm * Torsion spring units and parabolic suspension * Integrated receiving shaft for loading ramps * 4-stage telescopic cylinder * Single-circuit hydraulic connection * Floor plate made of 4mm sheet steel * 3 a few recessed lashing points * Pneumatic brake with ALB / ABV ATTENTION !!!!! MUST READ !!!!! We expressly reserve the right to sell the item prior to purchase, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer does not have any false impressions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! Images are similar, may contain accessories for which an additional charge is required. The internal dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! EXCHANGES AND PAYMENTS POSSIBLE !!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday ? Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, machine/vehicle number: ebf3f771e96394cd89e56bbb7, overall weight: 11,800 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle trailer Welded fine-grained steel construction 6 pairs of lashing eyes bolted to the outside of the floor/outer frame, 5 tons each 2 pairs of lashing eyes additionally bolted to the floor, 5 tons each in the corners Gear support foot at the front Folding rear support 2 wheel chocks with holder Steel underride guard Rear spray flaps across the entire width Quarter-shell mudguards 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Towing device central axle trailer Towing bar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension Drum brake axles, manufacturer's choice Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, Floor Steel/ checker plate floor for high point load capacity Note: Slight floor corrugation possible due to welding distortion! Platform length approx. 5,200 mm Rear sloping to approx. 900 mm Front wall / front corner stanchions 25 mm aluminum hollow profile, 400 mm high, Itodsi Rixrepfx Afnec Drop sides 25 mm aluminum hollow profile, 400 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions attached to the frame and with bracket for locking the drive-on ramps, drive-in width approx. 2,430 mm Drive-on ramps 2 steel ramps 2,300 mm long, 510 mm wide, can be moved sidewayswith grab handle on the ramps covered with 3 toothed steel rails With gas pressure jack for one-man operation Country of registration/plates Country of registration: Germany 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Front wall aluminum Side wall anodized aluminium Drive-on ramps Hot-dip galvanized Attention! These are archive pictures.

Condition: new, empty load weight: 907 kg, maximum load weight: 2,130 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, loading space volume: 2.2 m³, color: other, construction height: 1,260 mm, working width: 1,930 mm, Manufacturer: Humbaur Type: 3-sided tipper HTK Alu 3000.31 Perm. total weight: 3000 kg Weight: 3000 kg Payload: 2130 kg Unladen weight: 870 kg Box dimensions: 3140 x 1750 x 350 mm Tires: 13 inch Loading height: 750 mm Loading area hydraulically tiltable with hand pump and electric pump Tipping angle rear 42, side 50 with leaf grid attachment/steel grid attachment 600 mm high, 4-sided swinging - V-drawbar hot-dip galvanized - Chassis and tipper body hot-dip galvanized - Tipper body made of steel, made from one piece - 4-stage hard-chrome plated tipping cylinder - Hand pump, from 3000 kg perm. weight electric pump with hand pump, from 3000 kg perm. weight electric pump with hand pump, from 3000 kg perm. weight electric pump with hand pump. electric pump with hand pump - 13-pin plug and reversing light - 350 mm high aluminum drop sides, completely removable - rear flap can be swivelled - 6 tie-down rings mounted on the bridge floor, tensile force 800 kg per tie-down ring, Dekra tested - jockey wheel - plank shaft as preparation for aluminum planks for easy retrofitting Price incl. Vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is assumed for errors and misprints.automatic reverse drive, rubber spring axle, independent suspension, tiltable loading area, support wheel, marker lights, chassis and tipper body hot-dip galvanized, braked, incl. warranty, V-drawbar hot-dip galvanized, tipper body made of steel, made of one piece, 4-stage hard-chrome-plated tipping cylinder, hand pump, from 3000 kg permissible total weight, electric pump with hand pump. Electric pump with hand pump, 13-pin plug and reversing light, 350 mm high aluminum drop sides, completely removable, rear flap can be swivelled, 6 tie-down rings mounted on the bridge floor, tractive force 800 kg per tie-down ring, Dekra tested, plank shaft as preparation for aluminum planks for easy retrofitting Iodsktm Suopfx Afnotc

Condition: used, mileage: 195,285 km, power: 240 kW (326.31 HP), first registration: 09/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,050 mm, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 3, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, soot filter, traction control, Gearbox-dependent PTO, sale without the depicted refuse body, non-binding offer—subject to change and prior sale—sale takes place under exclusion of any warranty—all information provided without guarantee! Iodpfxjwv Sl Do Afnetc

Condition: used, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 06/2024, total width: 2,550 mm, Year of construction: 2023, Müller Mitteltal KA-TA-R 11.9 tandem 3-way tipper with lots of extras. Total weight: 11,900kg Standard payload approx.: 8,750kg Clear dimensions: 5,000x2,420x500mm Tires: 385/55R19.5 4-layer paintwork, single color Wheels: silver Chassis/underbody protection: hot-dip galvanized Platform with bulkhead: hot-dip galvanized Axles/springs/fuel tank etc.: black Side and rear wall: RAL 2011 deep orange Reinforced and certified structure in accordance with EN 12642 XL including load securing certificate. (Only in conjunction with 500mm high steel side walls). Rear stanchions screwed, hot-dip galvanized, without top coat. Lashing points LC 5,000 daN recessed at the front. Net hooks integrated at the side and rear in the bearings of the central locking system to the base side wall and 2 additional pieces on the front wall. BPW axles instead of GIANT tipping platform with permanently attached front wall in hot-dip galvanized design, with screwed, galvanized rear stanchions, without additional coating (not with HARDOX floor). Due to the system, the formation of waves during hot-dip galvanization, especially with the large floor panel, cannot be ruled out; complaints in this regard are excluded from the warranty. Tires 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940 ramp length 3,570 mm required). 1 plastic tool box, black, lockable, W=750xH=350xD=300mm (45kg payload with even load), arrangement: on the chassis frame on the right in the direction of travel. 1 pair of aluminum docking ramps without fairway (8 t/pair), 3,570x400x105mm, suitable for rubber-tired and tracked vehicles, 55 kg/each. Two-step access in front of the front wall, on the left in the direction of travel (hot-dip galvanized). Extended connecting lines for agricultural and forestry tractors. Further information Itodpfx Afovy Tvtenjc New: No

Condition: new, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,030 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2025, Equipment: ABS, * Drum brakes * Storage compartment for ramps * Aluminium ramps, load capacity 8,000 kg per pair on request, price: 1,800 euros net * Frame completely hot-dip galvanized Isdpjwdcg Iofx Afnjtc * 10 lashing eyes on the loading area * Loading height approx. 990 mm * Height-adjustable tow arm * Side walls spring-supported * Trailer immediately available * Suspension: leaf * Payload: 8,750 kg * Tires: 235/75R17.5 ----Information non-binding - errors not excluded - sale reserved

Condition: used, maximum load weight: 10,870 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 06/2025, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2023, Equipment: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 ton Gigant axles * Parabolic springs with tandem equalizer unit * Drawbar height adjustable by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted at the front on the right side of the chassis * 15-pin power connector * Multi-chamber tail lights * Bolt-on underride guard * Plastic quarter mudguards * Net hooks at each position of the central locking and 2 hooks on the front wall * Chassis made of fine-grain steel * Steel pallet 3-way tipping body, continuous side walls at the top with internal pipe reinforcement - without central stanchions, foldable with drop-side spring lifter * Rear stanchions bolted * Combo steel swing doors at the rear, 2-wing asymmetrically split, can be swiveled and locked to 270° - not foldable - with additional pendulum frame for automatic tailgate opening during tipping process, locking via galvanized rotary bar lock at the rear and central locking, deactivation function for automatic tailgate during reverse tipping with opened swing door * Each corner with 1 x 5 ton lashing point and 4 x 3 ton lashing rings recessed into the outer frame on each side * 4 mm steel sheet floor made of fine-grain steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 tons per pair) suitable for rubber-tired & tracked vehicles * Lockable storage compartment from the rear recessed under the loading area in the chassis for the ramps * Chassis, drawbar, underride guard, rear stanchion, rear folding supports hot-dip galvanized Isdpel Th Duofx Afnjtc * Axles, springs, air tank and landing gear painted black * Tires 285/70 19.5 * Side walls painted in RAL 9010 pure white * Painting of the side walls in a different RAL color available at extra cost * Vehicle has a day registration (unused) * Errors and prior sale excepted * Immediately available from Egestorf

Condition: used, machine/vehicle number: 275/70 R 22.5, first registration: 11/2004, color: other, Year of construction: 2004, USED TRAILER TIRES FOR SINGLE MONTAGE. Itjdsxwk H Hspfx Afnoc

Condition: used, empty load weight: 4,500 kg, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2015, next inspection (TÜV): 07/2025, loading space length: 4,800 mm, loading space width: 2,400 mm, loading space height: 1,000 mm, color: blue, Year of construction: 2015, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * Condition, see photos * Müller-Mitteltal 3-way tipper, type KA-TA-R 18.0 tandem * Tipper dimensions: 4,800 x 2,400 x 1,000 mm * Roll tarp * Air suspension * Disc brakes * Platform * Jost support leg * Payload 13,500 kg If a new TÜV inspection is required, we are happy to provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure the buyer does not have any misconceptions regarding condition or suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and features of the goods/vehicles. Itsdpfjwz H Nbox Afnjc Subject to alterations, prior sale, and errors.