Flatbed

Nor-Slep 3 Akslet

Condition: used, mileage: 5,874 km, Year of construction: 2021, Please provide reference number upon request: 20511 Specifications: - 2021 model - 5874 km (will increase slightly) - Eu-approved until: 21.02.26 - Euro 6 engine - 8x2 - 551 Hp - Suspension on 1st and 2nd axle: Steel - Suspension on 3rd and 4th axle: air - 2 x 110 liter variable pumps - 2 x manual extensions for main boom and 2 x for jib - Scanreco optical remote control (Top model) - Weight cell main boom - Extra function for main boom and jib - Auto leveling (The car puts itself in a level position ready for lifting.) - Virtual room (Possibility to limit all axes with a few keystrokes, no need to go to a workshop for this. Brilliant when working under high voltage etc.) - SKF central lubrication of the crown and up to the first joint - Extra function fully extended on jib - Single winch hook (Jib / main boom) - 2-part winch hook (Jib / main boom) - 4-part winch hook (Main boom) - Hook for jib - Hook for main boom (Large hook) - Emergency lowering unit (24 volts) - Wire stop sensor and sleeve - 4 ton winch - Diagnostic cable for online help (Remote help) - Danfoss valve center - 2 x 2 ton counterweight (Must only be used for cranes above the cabin otherwise the counterweights are not needed, and these can be removed as needed) - Front support leg Construction: - 4 x work lights strategically placed inside each support leg cabinet. Predpfjwlm Dtex Abwod - 50" LED bar work light rearward on the cabin - Powerful LED lamps in the crane. - VBG mount, with air servo control unit mounted in the rear cabinet left side. - Bracket on the roof - 2 pcs high beam LED bar on the roof forward (daylight!!). - Orange work warning LED beam on the roof. - EasyUp foldable ladder in the side with railing. - Boxes for chain, chainsaw etc. Mounted on the rear support leg so that these are driven out together with the support leg and are at the same time packed away while driving. - Charger for control in the cabin - Plastic internal screens axle 3 and 4. - 3 edge pull-out cabinet between axle 3 and 4 - On the left side between axle 2 and 3 there is a large cabinet with 500 W fan heater installed to hang clothes to dry etc. - Plane / bottom at the rear closed with alloxed aluminum floor plates that are cut to fit the car perfectly, with rounded edges for a very professional send. - CNC manufactured plates up the rear edge of the cabin. - Fully painted sides, cabin and stern. - Resting cradle for crane for driving without jib. - 5 support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cradles at the rear on the "level" - Right side large cabinet 1.2 x 1 meter - Powerful LED back / work lights at the rear. - Rear part of the car rebuilt with CNC manufactured plates, and beautiful LED taillights have been installed in several stages. - Hatches strategically placed for access to relevant devices under the bodywork. - Precisely cut out fields in the side coverage for access to the screen, manual controls, emergency lowering functions etc. - Marker lights along the side mounted so that they flash together with the turn signals / direction indicators - Cradle to hold the jib when not in use. - Hydraulic extra function dismantled main boom and jib, but mounted if desired. - Kettle in cabin - Microwave oven in cabin - Light...

Condition: used, Year of construction: 2019, operating hours: 6,000 h, load capacity: 3,000 kg, lifting height: 3,950 mm, fuel type: diesel, mast type: triplex, construction height: 2,100 mm, power: 47 kW (63.90 HP), tire condition: 80 %, rear tire size: 700x12 14PR Continental, empty load weight: 5,500 kg, total length: 4,080 mm, color: other, maximum speed: 20 km/h, Attachments: Sideshift. Special equipment: 3rd valve, 4th valve, rear working lights, front working lights, heater, full cabin, full free lift. Description: The MSI 30 is a versatile mast forklift and unique in its class. It can be used in the wood and paper industries, in recycling, logistics applications, and more. Whether indoors, in the yard, or on light terrain, the hydrostatic transmission, combined with a powerful engine and two large-diameter drive wheels, enables precise and smooth operation. This machine delivers daily productivity gains. For efficient maneuvering, the MSI 30 is equipped with a steering axle with an integrated cylinder, providing it with a very tight turning radius. Thanks to a wide range of available attachments, the MSI 30 is extremely versatile and suitable for lifting, loading, unloading, and storing long loads. It has a lifting capacity of 3.0 t. Psdpjxtf R Eefx Abwsrd

Condition: used, axle configuration: 3 axles, first registration: 02/2012, total length: 12,500 mm, total width: 2,450 mm, total height: 1,350 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 9,510 mm, color: other, Year of construction: 2012, Equipment: ABS, = Additional Options and Accessories = - EBS - Central lubrication = Notes = Number of axles: 3, Payload: 36,240 kg, Unladen weight: 6,760 kg, Gross weight: 43,000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Central lubrication, Suspension type: Air suspension, ABS, EBS, Body year: 2012, Twist lock positions: 2x20 + 1x30 + 1x40 + 1x45 high cube, Extendable chassis: Rear extension, Axle type: SAF = Further Information = General Information Cab: Day cab Registration number: OL-97-PL Powertrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Steered; Left tyre tread: 8 mm; Right tyre tread: 9 mm Axle 2: Left tyre tread: 12 mm; Right tyre tread: 10 mm Axle 3: Steered; Left tyre tread: 10 mm; Right tyre tread: 12 mm Weights Unladen weight: 6,760 kg Payload: 36,240 kg GVW: 43,000 kg Functional Loading platform height: 115 cm Environment Emission class: Euro 0 Maintenance APK (Periodic Technical Inspection): Valid until 02.2026 Condition General condition: Moderate Technical condition: Moderate Optical condition: Moderate Damages: None = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognisable quality • Competitive prices • Reliable business practices • Multilingual staff • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Professional technical services • The security of 'recognisable quality' • And more.... Please visit our website for special offers and the full stock list: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Podpfextmh Ssx Abwjrd Ask directly about our European warranty package.

Year of construction: 2025, condition: used, New: Yes CE marking: yes Predpow U T Rqjfx Abwsd Serial number: 1/4

Condition: used, Year of construction: 2017, Please provide reference number upon request: 21688 Specifications: 2017 model 9203 hours 3114 stroke hours 168 kW 16400 kg Leica GPS 2540 hammer Rod shifter Carousel Magazine Winch Compressor Aluminum feed beam Undercarriage oscillation Services taken by yourself Protective cage Chassis (see pictures) T45 Vacuum cleaner Remote control Light Ready for delivery   Description: We have a 2017 Atlas Copco T35R-01 Drilling rig w/ cop 2540 hammer, grinder and Leica gps for sale. The rig functions as it should and maintenance and service have been taken care of continuously by the owner. The GPS control provides precise control over the drilling pattern and drilling depth, which contributes to optimal volley and a better blasting result. Ready for delivery. Own weight: 16400 Engine hours: 9203 Pedsxr Tx Iopfx Abword Model: T35R-01 Borerigg m/ cop 2540 hammer, sliper og Leica gps = More information = Serial number: tmg17sedo222/xxxx Please contact ATS Norway for more information

Condition: used, CE marking: yes Serial number: TBA Prjdpfx Abexdlrkewod

Condition: new, empty load weight: 2,950 kg, maximum load weight: 11,450 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 205/65R17,5, color: other, gearing type: other, front tire size: 205/65R17,5, rear tire size: 205/65R17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 820 mm, vehicle interior width approx. 2,480 mm, front wall galvanized steel, 600 mm aluminium drop sides foldable and removable, 3 stake pockets in the middle for 80 x 80 stakes, removable stakes, 6 x lashing brackets, outer frame with lashing eyes, reinforced gear support winch with load and fast gear, contour marking and side collision protection, mudguards and spray mist suppression, rear, , Surcharge for front wall grille 1.600 mm high (perforated plate), price: 1,400 Euro, , Surcharge for aluminum ramps load capacity per pair 9 t and 2 x folding supports rear, price: 1,800 Euro, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Pjdpfx Ajxr Dtvjbwerd

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading bed length approx.: 8,800 mm, low bed approx.: 6,600 mm long, loaded platform height approx. 890 mm, 24 tie-down rings each 10 t, 12 stake pockets in the outer frame, access ramps (approx. 3,100 x 750 mm), climbing strip on the outside of the ramps and rear slope, access ramps laterally adjustable, 68 mm thick wooden floor, storage box with lid for lashing chains or tension belts, contour marking according to regulations, revolving beacon, vehicle hot-dip galvanized, incl. axle load indicators. Surcharge for: warning signs with lighting and revolving beacon, widening to 3 m with wood inserts, price: 500 €; digger arm recess, price: 1,000 € net. -- Printing errors, mistakes and changes reserved, sample pictures -- More data at: !, More details at: ! Pjdpfxexr Dr Eo Abwjrd

Condition: new, Year of construction: 2024, = Further options and accessories = - Spare wheel = Notes = MEASURES & DIMENSIONS Gross Vehicle Weight (kg) : 70,000 Loading Platform Length (mm) : 10,500 Weight of Axle Group (kg) : 48,000 Total Length (mm) : 14,900 Kingpin Capacity (kg) : 22,000 Total Width (mm) : 3,000 Curb Weight (kg) : 13,440 Loading Platform Height (mm) : 1,350 Pay Load (kg) : 60,000 Height of 5.th Wheel (mm) : 1,400 CONSTRUCTIONS Base chassis Prjdpfxexn S Ers Abwod Heavy duty and extra durability designed I type chassis All welded S355 steel chassis. Outer frame is UPE 240 profile. Welding (Chassis) : Automatic ARC submerged. Welding (Superstructure): Automatic robot welding. Axle (Type): Özgül Turkish Brand Drum brakes 3 x 16 Ton axles Suspension (Type): Mechanical leaf spring suspension / 12-14 lines King pin (Type) : 1 position with 1x coupling-pen 2” (EU approved) Çayırova Brand. + 3.5 inches Tires: 12+1 Units, 12 R 22.5 Available brand in stock Rims: 12+1 units, 9.00 x 22.5 steel rims. Jantas or Ako Brand. Landing Gear: Mechanically operated by one side, two speed. Gos Brand. Brake System: Two line air brake system acting on all wheels Brake chamber 1 axles with 2 units emergency brake chambers. 2 axle with 4 unit service brake chambers. Electric system 24V, 2x7 + 1x15 pin sockets, according to SAE standard with ADR Adaptation SABA brand. • 2 x Rear Stop Lights. - 4 x side lights. • 2 x White Lights - 2 x Front Lights • 2 x Registration Plate Lights - 2 x rotating Lights Floor Middle of platform and on the axles complete checked sugar plate 6/7 mm steel,edges of the axles are wood and steel ,From the gooseneck end to 1.axles finishing area edges are 900 mm width,70 mm height hard wood. Rear loading ramps Hydraulic operated rear ramps with Electro pump for rear ramps hydraulic function with cable push – button for remote r ramps length 2800 mm width 900 mm, covered all steel and 20x40 mm thickness steel bars. Color : Upon Request Paint Application Sand Blasting, Chemical cleaning, HYZINC covering, Epoxy covering and 2 coats of acrylic paint. TECHNICAL SPECIFICATIONS Accessories • 2 x 7 pcs of heavy duty lashing rings mounted on the outer frame mushroom type • 4 x Certificated Expray mud flaps. • 1 x Plastic water tank • 2 x Wheel chocks and holders • 2 x 7 Galvanized side extension brackets 250 mm + 250 mm • 2 x Side Protections steel • 1 x tool box. • 1 x spare wheel carrier with 1 tire (on the gooseneck) • 2 x manual support legs at the rear. • 2 x Reflective tape and reflector sign at the rear and sides. • 2 x side extension reflectors • 1 plaque places on bumper = Further information = Curb weight: 13,440 kg

Condition: new, Year of construction: 2024, = Further options and accessories = - Spare wheel = Notes = MEASURES & DIMENSIONS Gross Vehicle Weight (kg) : 70,000 Loading Platform Length (mm) : 10,500 Weight of Axle Group (kg) : 48,000 Total Length (mm) : 14,900 Kingpin Capacity (kg) : 22,000 Total Width (mm) : 3,000 Curb Weight (kg) : 13,440 Loading Platform Height (mm) : 1,350 Pay Load (kg) : 60,000 Height of 5.th Wheel (mm) : 1,400 CONSTRUCTIONS Base chassis Heavy duty and extra durability designed I type chassis All welded S355 steel chassis. Outer frame is UPE 240 profile. Pjdpfx Absxn S Efjword Welding (Chassis) : Automatic ARC submerged. Welding (Superstructure): Automatic robot welding. Axle (Type): Özgül Turkish Brand Drum brakes 3 x 16 Ton axles Suspension (Type): Mechanical leaf spring suspension / 12-14 lines King pin (Type) : 1 position with 1x coupling-pen 2” (EU approved) Çayırova Brand. + 3.5 inches Tires: 12+1 Units, 12 R 22.5 Available brand in stock Rims: 12+1 units, 9.00 x 22.5 steel rims. Jantas or Ako Brand. Landing Gear: Mechanically operated by one side, two speed. Gos Brand. Brake System: Two line air brake system acting on all wheels Brake chamber 1 axles with 2 units emergency brake chambers. 2 axle with 4 unit service brake chambers. Electric system 24V, 2x7 + 1x15 pin sockets, according to SAE standard with ADR Adaptation SABA brand. • 2 x Rear Stop Lights. - 4 x side lights. • 2 x White Lights - 2 x Front Lights • 2 x Registration Plate Lights - 2 x rotating Lights Floor Middle of platform and on the axles complete checked sugar plate 6/7 mm steel,edges of the axles are wood and steel ,From the gooseneck end to 1.axles finishing area edges are 900 mm width,70 mm height hard wood. Rear loading ramps Hydraulic operated rear ramps with Electro pump for rear ramps hydraulic function with cable push – button for remote r ramps length 2800 mm width 900 mm, covered all steel and 20x40 mm thickness steel bars. Color : Upon Request Paint Application Sand Blasting, Chemical cleaning, HYZINC covering, Epoxy covering and 2 coats of acrylic paint. TECHNICAL SPECIFICATIONS Accessories • 2 x 7 pcs of heavy duty lashing rings mounted on the outer frame mushroom type • 4 x Certificated Expray mud flaps. • 1 x Plastic water tank • 2 x Wheel chocks and holders • 2 x 7 Galvanized side extension brackets 250 mm + 250 mm • 2 x Side Protections steel • 1 x tool box. • 1 x spare wheel carrier with 1 tire (on the gooseneck) • 2 x manual support legs at the rear. • 2 x Reflective tape and reflector sign at the rear and sides. • 2 x side extension reflectors • 1 plaque places on bumper = Further information = Curb weight: 13,440 kg