Off-road forklift

Manitou MSI 30 T Container

Condition: used, Year of construction: 2021, operating hours: 1,880 h, load capacity: 5,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,780 mm, power: 55 kW (74.78 HP), tire condition: 100 %, empty load weight: 8,695 kg, total length: 4,910 mm, color: other, maximum speed: 15 km/h, Attachments: Sideshift, Optional equipment: 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cab, Full free lift, Description: The MSI 50 is a unique semi-industrial mast truck that can lift up to 5 tons. It can move easily on paved or semi-paved surfaces thanks to its two drive wheels and a choice of tires that allow it to be adapted to different applications. This telehandler is ideal for the recycling sector or the timber industry. It has a hydrostatic transmission, which gives it great smoothness when approaching and picking up loads, thus increasing work efficiency. The workstation is accessible from two sides and has a spring-mounted cab to limit the effects of vibrations on the operator. Hfjdpfxemn Ty Ds Ab Aor

Condition: used, Year of construction: 2013, load capacity: 3,000 kg, lifting height: 4,500 mm, fuel type: diesel, construction height: 3,000 mm, tire condition: 50 %, front tire size: 275/70 R22.5, rear tire size: 7.00-12, color: other, Attachments: Sideshift, Special equipment: 3rd valve, Rear working lights, Front working lights, Heating, Full cab, Special equipment description: Overhead guard, 3rd control circuit, 1 front working light, 2 rear working lights Hfsdpfx Astv Nuzeb Aor

Condition: new, machine/vehicle number: 14507, Year of construction: 2017, operating hours: 2,534 h, load capacity: 3,500 kg, lifting height: 3,700 mm, free lift: 150 mm, construction height: 2,520 mm, front tire size: 385/55 R18 IND, rear tire size: 7.00-12 NHS, overall weight: 4,900 kg, enginetype: Diesel, manufacturer: Manitou Hfedew Aymvepfx Ab Asr

Condition: used, Year of construction: 2019, operating hours: 960 h, load capacity: 2,500 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,000 mm, power: 44 kW (59.82 HP), tire condition: 100 %, front tire size: 15.5/55 R 18, empty load weight: 3,600 kg, total length: 2,260 mm, color: other, maximum speed: 20 km/h, Attachments: sideshift, Special equipment: 3rd valve, 4th valve, half-cab, Hfsdpowvmdnsfx Ab Ajr

Condition: used, operating hours: 5,000 h, fuel type: diesel, gearing type: mechanical, MANITOU MSI50T 1E3 FORKLIFT Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2012 ? BETRIEBSSTD. 5000 Std TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? Hsdpfx Aotuiaieb Aofr * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: used, machine/vehicle number: MAN00000V01038232, Year of construction: 2020, operating hours: 1,068 h, lifting height: 4,200 mm, fuel type: diesel, power: 37 kW (50.31 HP), motor manufacturer: Kubota, Lifting capacity: 3,000 kg Overall height: 216 cm Hodpfx Absw Rab Is Aefr Front tyre condition: 80% Rear tyre condition: 80% Transport dimensions (L x W x H): 4.23 x 1.45 x 2.15 m Please contact PFEIFER GROUP for further information.

Condition: used, Year of construction: 2005, load capacity: 3,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: triplex, construction height: 3,050 mm, power: 70 kW (95.17 HP), tire condition: 50 %, front tire size: 16.5/85-24, rear tire size: 10.5/80-18, color: other, Attachments: load protection grille, side shifter. Special equipment: front work lights, heating, full cabin. Special equipment description: driver protection roof, 3rd hydraulic circuit, lighting Hjdpfx Asxmk Rdob Asfr

Condition: used, mileage: 5,874 km, Year of construction: 2021, Please provide reference number upon request: 20511 Specifications: - 2021 model - 5874 km (will increase slightly) - Eu-approved until: 21.02.26 - Euro 6 engine - 8x2 - 551 Hp - Suspension on 1st and 2nd axle: Steel - Suspension on 3rd and 4th axle: air - 2 x 110 liter variable pumps - 2 x manual extensions for main boom and 2 x for jib - Scanreco optical remote control (Top model) - Weight cell main boom - Extra function for main boom and jib - Auto leveling (The car puts itself in a level position ready for lifting.) - Virtual room (Possibility to limit all axes with a few keystrokes, no need to go to a workshop for this. Brilliant when working under high voltage etc.) - SKF central lubrication of the crown and up to the first joint - Extra function fully extended on jib - Single winch hook (Jib / main boom) - 2-part winch hook (Jib / main boom) - 4-part winch hook (Main boom) - Hook for jib - Hook for main boom (Large hook) - Emergency lowering unit (24 volts) - Wire stop sensor and sleeve - 4 ton winch - Diagnostic cable for online help (Remote help) - Danfoss valve center - 2 x 2 ton counterweight (Must only be used for cranes above the cabin otherwise the counterweights are not needed, and these can be removed as needed) - Front support leg Construction: - 4 x work lights strategically placed inside each support leg cabinet. - 50" LED bar work light rearward on the cabin - Powerful LED lamps in the crane. - VBG mount, with air servo control unit mounted in the rear cabinet left side. - Bracket on the roof - 2 pcs high beam LED bar on the roof forward (daylight!!). - Orange work warning LED beam on the roof. - EasyUp foldable ladder in the side with railing. - Boxes for chain, chainsaw etc. Mounted on the rear support leg so that these are driven out together with the support leg and are at the same time packed away while driving. - Charger for control in the cabin - Plastic internal screens axle 3 and 4. - 3 edge pull-out cabinet between axle 3 and 4 - On the left side between axle 2 and 3 there is a large cabinet with 500 W fan heater installed to hang clothes to dry etc. - Plane / bottom at the rear closed with alloxed aluminum floor plates that are cut to fit the car perfectly, with rounded edges for a very professional send. - CNC manufactured plates up the rear edge of the cabin. - Fully painted sides, cabin and stern. - Resting cradle for crane for driving without jib. - 5 support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cradles at the rear on the "level" - Right side large cabinet 1.2 x 1 meter - Powerful LED back / work lights at the rear. - Rear part of the car rebuilt with CNC manufactured plates, and beautiful LED taillights have been installed in several stages. Hsdpfxowlm Dtj Ab Aefr - Hatches strategically placed for access to relevant devices under the bodywork. - Precisely cut out fields in the side coverage for access to the screen, manual controls, emergency lowering functions etc. - Marker lights along the side mounted so that they flash together with the turn signals / direction indicators - Cradle to hold the jib when not in use. - Hydraulic extra function dismantled main boom and jib, but mounted if desired. - Kettle in cabin - Microwave oven in cabin - Light...

Condition: used, machine/vehicle number: MAN00000V01024962, Year of construction: 2019, operating hours: 1,818 h, lifting height: 5,500 mm, fuel type: diesel, power: 55 kW (74.78 HP), motor manufacturer: -, gearing type: mechanical, Lifting capacity: 3,000 kg Overall height: 313 cm Hfsdpfxjuwxqbe Ab Aor Tire condition front: 100 Tire condition rear: 100 Transport dimensions (L x W x H): 4.7 x 1.92 x 3.12 m Please contact PFEIFER GROUP for further information.

Condition: used, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 4,350 mm, mast type: triplex, tire condition: 50 %, color: other, Attachments: side shifter, fork positioner, Special equipment: 3rd valve, 4th valve, heating, full cabin, LED, Hsdpjw Nbxlofx Ab Asfr