All-terrain crane

Demag AC220-5 Dutch Registration, 10x6x10, 220t Ca

Condition: defective spare-parts repository (used), Accident crane Liebherr LTM 1100-4.2 Manufacturer: Liebherr Type: LTM 1100-4.2 Year: 2017 All equipment without damage Counterweights Hydraulic double jib boom Boom Bedev Ean Hjpfx Abzecw Soldout: Winch 1 Winch 2 Runner 2.5 ton counterweight instead of the second winch Upper cabin was never usable

Condition: new, empty load weight: 17,500 kg, maximum load weight: 43,500 kg, overall weight: 61,000 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,750 mm, loading space height: 400 mm, tire size: 245/70 R 17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered and lowered hydraulically -For tractor units: 6x4 or 8x4 Drop deck: -Low bed with external beams in extendable design, "SUPER LOW" design, length approx. 7,550 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking mechanism The supply lines are protected in the pull-out supports and automatically adjust to the respective drop-down bed length Rear chassis: -Rear chassis with closed outer frame, checker plate covering and continuous Prisma excavator trough approx. 1,450/900 x 505 mm, open at the rear -2 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame Axles and tires: -"PENDEL-AXLE", all axles with hydromechanical forced steering Bcjdpeh Hm Thefx Abzew -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with stopcocks and locking pin for securing in raised position -Technical axle load: 12,000 kg -Hydraulic axle compensation -245/70 R 17.5 / 3PMSF tires Accessories included: -Preparation for mounting bolt-on container positioners for 1x 20ft or 1x 40ft container on the outer beams -2" kingpin -One galvanized steel end wall approx. 400 mm high -One spare wheel with holder -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering can be operated from the front and rear by remote control cable via pushbuttons, with axle tracking control -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw coupling -Electric hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and red at the rear -2 wooden blocks 500x250x200 mm -European reflector plates (red/yellow) at the rear of the trailer -On the gooseneck and on the rear plate on the left and right, one holder each for the warning signs including socket -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 standard grease -Load manometer for determining the axle loads including load diagram -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,000 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,120 mm) -Separate air connection with air gun on the gooseneck -Duomatic air coupling from gooseneck to low bed -Gooseneck closed in the rear upper area with a removable cover -1 pair of steel ramps for bridging the mounting hooks of the low bed -Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm -Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver for tracking control 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting screw-on RUD rings VLBG-4 -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -folding extensions, approx. 230 mm on each side -A layer of sand painted onto the loading surface to prevent slipping Dipper arm recess of the rear chassis closed at the front and rear with a plug-in plate -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - aluminium 15%)

Condition: used, mileage: 88,100 km, first registration: 04/2005, fuel type: diesel, tire size: 445/95 R 25, axle configuration: 4x4, fuel: diesel, brakes: retarder, suspension: hydraulics, Year of construction: 2005, Equipment: ABS, crane, retarder, = Additional options and accessories = - Mechanical tachograph - Hub reduction - Radio/CD player = Further information = Tyre size: 445/95 R 25 Suspension: hydraulic suspension Bcodpfx Abjx Dc Ehjzew Front axle: Steered; Tyre tread left: 80%; Tyre tread right: 80% Rear axle: Tyre tread left: 60%; Tyre tread right: 60% Unladen weight: 23,999 kg Payload: 1 kg Gross vehicle weight: 24,000 kg Damage: none

Condition: used, mileage: 129,252 km, lifting height: 38,000 mm, Year of construction: 2015, Application: Construction Drive: Wheel Bodpfx Aow A Hb Tsbzscw Unladen weight: 27,875 kg Lifting capacity: 23,800 kg Serial number: 122024 Front tyre condition: 70% Rear tyre condition: 70% Transport dimensions (L x W x H): 11.1 x 2.55 x 3.9 m Contact PFEIFER GROUP for further information.

Condition: used, mileage: 53,318 km, lifting height: 110,000 mm, Year of construction: 2018, Drive: Wheel Unladen weight: 60,000 kg Lifting capacity: 250,000 kg Serial number: 088666 Front tire condition: 90% Rear tire condition: 90% Transport dimensions (L x W x H): 15.86 x 2.99 x 3.99 m Bodjwz Utzjpfx Abzocw Contact PFEIFER GROUP for further information.

Condition: used, mileage: 278,066 km, Year of construction: 2009, Intended use: Construction Bcjdew D N Rajpfx Abzew Drive: Wheel Unladen weight: 72,000 kg Lifting capacity: 150,000 kg Serial number: 068506 Front tire condition: 80% Rear tire condition: 80% Transport dimensions (L x W x H): 16.2 x 2.85 x 3.95 m Please contact PFEIFER GROUP for further information.

Condition: excellent (used), color: red, mast type: telescopic, Year of construction: 2012, Year of manufacture: 2012 Body brand: LIEBHERR LTR 1100 CE marking: yes Technical condition: very good Visual condition: very good Price: On request HYDRAULIC WINCH FOR LIEBHERR LTR 1100 CRANE YEAR OF MANUFACTURE 2011/2012 1.3 t CE FOLLOW US ON INSTAGRAM: GEURTSTRUCKS Bedpfsuxvz Tox Abzjcw WE SPEAK GERMAN WE SPEAK SPANISH WE SPEAK ENGLISH

Condition: excellent (used), axle configuration: > 3 axles, first registration: 04/2014, loading space length: 15,870 mm, loading space width: 2,520 mm, loading space height: 1,670 mm, total length: 15,870 mm, total width: 2,520 mm, total height: 1,670 mm, suspension: air, tire size: 385/65R22.5, color: blue, Year of construction: 2014, Color: Blue Payload: 83,122 kg Loading floor height: 167 cm Manufacturer: Nooteboom Type: 0VB-102-06 Ballast Trailer VIN: XMR0VB000E0000166 Year of manufacture: 10-04-2014 Weights: King-pin load: 30,000 kg Axle load: 10,000 kg (each axle) Total axle load: 60,000 kg Bodpfxsuu Hfao Abzscw Gross vehicle weight (GVW): 90,000 kg Unladen (empty) weight: 16,880 kg Payload: 83,120 kg Dimensions: Length: 15,870 mm Loading floor width: 2,520 mm Total height: 1,670 mm King-pin height: 1,350 mm (+/-) Axles: Axle brand: SAF Hydro-pneumatic suspension 1st axle: friction steered 2nd axle: rigid Axles 3 - 6: hydraulically steered Axles 1 & 2: liftable Tyres: 385 / 65 R22.5, Load index: 164K Additional equipment: NATO plug Lashing rings Stake pockets + stakes Wooden loading floor Hydraulic landing gear Toolbox Electro-hydraulic pump for trailer functions Spare wheel with holder Work lights Rear underrun protection with lights King-pin 2.0'' Central greasing system Radio remote control = Further information = Axle configuration Tyre size: 385/65R22.5 Axle brand: SAF Suspension: air suspension Rear axle 1: lift axle; max. axle load: 10,000 kg; steered Rear axle 2: lift axle; max. axle load: 10,000 kg Rear axle 3: max. axle load: 10,000 kg; steered Rear axle 4: max. axle load: 10,000 kg; steered Rear axle 5: max. axle load: 10,000 kg; steered Rear axle 6: max. axle load: 10,000 kg; steered Weights Unladen weight: 16,880 kg Payload: 73,120 kg GVW: 90,000 kg Condition Technical condition: very good Optical condition: very good Damages: none For more information, please contact Stefan Schaapveld.

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, Purpose: Construction Drive: Wheel Unladen weight: 48,000 kg Lifting capacity: 220,000 kg Bcjdpfx Aswk T Ucsbzew Serial number: 82609 Front tire condition: 90 Rear tire condition: 90 Transport dimensions (L x W x H): 15.3 x 3 x 4 Please contact PFEIFER GROUP for further information.

Condition: used, mileage: 122,196 km, Year of construction: 2017, operating hours: 8,592 h, Intended use: Construction Bcsdpew Uch Esfx Abzsw Drive: Wheel Unladen weight: 26,000 kg Lifting capacity: 40,000 kg Serial number: 256086 Condition of front tyres: 70 Condition of rear tyres: 70 Transport dimensions (L x W x H): 10.7 x 2.55 x 3.4 Please contact PFEIFER GROUP for further information.