Standard tractor unit

MERCEDES-BENZ ACTROS 4148 AK 8X8 mit Fassi Kran F660A

Condition: new, maximum load weight: 49,000 kg, overall weight: 60,800 kg, axle configuration: > 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 r 17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck with beveled corners at the front 45° and with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood decking 30 mm thick Loading area in extendable version: -Loading surface in extendable version with rear bevel of approx. 1,000 mm x 8° -5 pairs of lashing rings can be folded outwards (LC 5,000 daN) -3 pairs of lashing rings can be folded outwards (LC 10,000 daN) -1 pair of lashing rings lying in the front of the cargo bed (LC 10,000 daN) Cut-outs in the outer frame of the cargo bed for attaching lashing straps. (LC 2,000 daN) -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Removable two-part ramps: -A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking -Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable -Maximum load per pair: 40,000 kg Seat posts: -JOST fifth wheels (mechanical) with 2-speed gearbox for 24 t lifting load (50 t test load) Axles and tires: -BPW axles, two axles rigid two axles self-steering, air-suspended, with drum brake, with lifting/lowering function The self-steering axles with electro-magnetic reverse lock can be activated via reverse gear or manually -axle tool -235/75 R 17.5 tires Brake system: -brake system in accordance with EU regulations with EBS-E (4S3M) Steel construction: -steel construction made of high-strength fine-grained steels -Steel grades: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) Coating: -First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in nova grey Electrical system: -Electrical system in accordance with EU regulations, 24 volt ASPÖCK-NORDIK lighting (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Accessories included: -2" kingpin -One galvanized steel bulkhead approx. 400 mm high -One spare wheel with holder in front of the bulkhead -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks with holder on the bulkhead -Mounting in the rear area of the gooseneck for ALU docking ramps -Galvanized folding supports under the bevel of the cargo bed -One bracket for a rotating beacon -Cover plates to bridge the gap between ramps and cargo bed -White reflector tape in accordance with EU regulations on the sides, on the extension and red at the rear -Electric hydraulic unit -On the gooseneck and on the ramps on the left and right a holder for the warning signs including socket -Control valves for the ramps mounted on the right-hand side of the trailer -One mud flap at the rear of the trailer -Manual and description on USB stick -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm Hsdpfx Ash Etf Rjbnen -The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) -4 pairs of WADER container pockets in the loading area for one 20ft, 2x 20ft or one 40ft container -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -Galvanized extensions, extendable by approx. 230 mm per side -Lift axle on the front axle with controls -Square climbing rails 20 x 20 mm -BEKAMAX central lubrication system -Four warning signs extendable by approx. 400 mm approx. 423 x 423 mm

Condition: used, Year of construction: 2002, operating hours: 11,800 h, machine/vehicle number: NEW-12, Manufacturer: Komatsu Type: WA 400-5H Year of construction: 2002 Gross vehicle weight: 21180 kg Power: 140 Kw Operating hours: 11800 Central lubrication system scales Tires 50 % ROPS cab Incl. bucket Sale only to tradesmen or export Hodpsiaipasfx Abnon Subject to prior sale and errors excepted

Condition: excellent (used), mileage: 753,000 km, power: 300 kW (407.89 HP), first registration: 12/2011, fuel type: diesel, axle configuration: 8x2, fuel: diesel, gearing type: mechanical, emission class: euro5, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 11,500 kg, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 1,070 mm, Year of construction: 2011, Equipment: crane, trailer coupling, = Additional options and accessories = - Aluminium fuel tank - Air suspension - Sun visor - Towing jaw = Additional information = Axle configuration Front axle 1: Max. axle load: 9,000 kg Front axle 2: Max. axle load: 9,000 kg Rear axle 1: Max. axle load: 11,500 kg Rear axle 2: Lift axle; Max. axle load: 7,500 kg; Steered Weights Unladen weight: 23,330 kg Payload: 13,670 kg Gross vehicle weight: 37,000 kg Functional Body manufacturer: HMF 6020-O K6 CE marking: yes Condition Technical condition: very good Optical condition: very good Hjdpew Tavdjfx Abnon Financial information Price: On request Identification Registration number: BZ-PS-78

Condition: used, power: 210 kW (285.52 HP), first registration: 11/2007, fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: white, gearing type: semi-automatic, number of gears: 8, emission class: euro4, Year of construction: 2007, Equipment: ABS, air conditioning, electric window regulation, onboard computer, power assisted steering, soot filter, trailer coupling, = Additional options and equipment = - Tachometer - Rear electric windows - Radio/CD player - Reversing camera = Further information = Number of cylinders: 6 Engine displacement: 6,374 cc Unladen weight: 8,663 kg Payload: 3,837 kg Hedpovk Nqnjfx Abnjn Gross vehicle weight: 12,500 kg Max. towing capacity: 10,000 kg (unbraked 750 kg) Interior: grey MOT (main technical inspection): New TÜV upon delivery Number of keys: 2

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the length of the loading area, length approx. 3,750 mm, with a bevel at the rear of approx. 850 mm x 10° -Can be raised and lowered hydraulically, stroke +- 250 mm including hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For tractor units: 6 x 4 and 8 x 4 Loading area: -Loading area in extendable design, length approx. 11,000 mm with a bevel at the rear of approx. 500 mm x 10°. -A recess in the loading area and in the bevel to accommodate the excavator bucket handle approx. 4,240 x 900 x 440 mm -Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically foldable ramp tips. Hsdpfjk Af Svsx Abnen -Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards -25 mm "Super Grip" rubber floor and approx. 5 mm sheet metal floor as additional reinforcement on the slope of the loading area -20x30 mm square climbing rails, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steered -The steering behavior of the first two axles can be optimally adjusted to the length of the loading area both mechanically and hydraulically. -Hose rupture valve on the axle compensation cylinder with automatic RESET function. -Hydraulic cylinder with shut-off valves and pins for securing in the raised position. -245/70 R 17.5 3PMSF Accessories included: -Steel bulkhead, pluggable, approx. 400 mm high -Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile -1 spare wheel -Outer support of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screwable lashing rings included -Checker plate covering above the gooseneck -On the gooseneck 1 pair of pluggable aluminum side walls on the side, approx. 400 mm high, anodized -On the gooseneck a pluggable aluminum rear wall, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide -4 Brake shoes -4 axle load gauges -Mechanical downpipe supports at the front -1 one-piece INOX tool box, approx. 2,480 x 340 x 390 mm -Mechanical downpipe supports at the front -Continuous sheet metal covering on the loading area with a painted layer of sand to prevent slipping -1 intermediate table, approx. 500 mm wide, for the pull-out, with long holes for hanging and movable bridging elements -Painted sand coating on the support surfaces of the intermediate table -Mechanical locking for locking the intermediate table to the pull-out -8 pairs of stake pockets in the outer frame -Extensions (galvanized) extendable by approx. 230 mm per side -1 pair of hydraulic. Rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electro-hydraulic unit -Widening planks, loose, in reinforced steel U-frame -Radio and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: used, mileage: 163,414 km, power: 320 kW (435.08 HP), first registration: 11/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: red, gearing type: semi-automatic, emission class: euro4, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, parking heater, Mercedes-Benz Actros 2644 - MP2 - Leaf/Leaf Suspension - 6x4 Drive - All-round lighting - Light bar Hodpfxjxttrqo Abnsn - Air conditioning Fassi F800BXB - Jib - Winch - Radio remote control - Year of manufacture: 2007 - 4x hydraulic outriggers - Concrete counterweight Errors and prior sale excepted. Internal vehicle number: 11539

Condition: used, mileage: 360,299 km, power: 353 kW (479.95 HP), first registration: 06/2008, fuel type: diesel, empty load weight: 10,700 kg, maximum load weight: 15,300 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,600 mm, brakes: retarder, color: yellow, driver cabin: day cab, gearing type: other, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, central locking, cruise control, differential lock, electronic stability program (ESP), hydraulics, onboard computer, soot filter, traction control, trailer coupling, MERCEDES-BENZ Actros 2648 swap body/tractor unit Emission class: Euro 5 Wheel configuration: 6x4 all-wheel drive with cardan shaft Transmission: EPS semi-automatic Suspension: leaf/air Lift/steering axle Tipper hydraulics Engine completely overhauled less than 100,000 km ago Retarder Air conditioning Trailer coupling Cruise control Displacement: 11,946 cc Unladen weight: 10,700 kg Payload: 15,300 kg Gross vehicle weight: 26,000 kg Wheelbase: 3.60 m Tyres: 8/5/5 mm 1st owner Video available on request. We also buy your truck or take it in part exchange. Online inspection possible via WhatsApp and Viber. We can arrange delivery to your address in Germany and Europe, or to international ports, at an additional cost. Upon request, we can also offer remote quality assurance, for example by carrying out the TÜV inspection for you (subject to charge). Quick and easy financing options for customers from Germany. For exports outside the EU, the statutory VAT must be deposited as a security. Hjdpfx Aoyhnizsbnsn Errors and prior sale reserved. More offers available on our website. We are happy to answer all your questions. German and English spoken; also available in Czech, French, Russian, and Bulgarian. All details provided without guarantee, incl. features and accessories.

Condition: new, DESCRIPTION ON REQUEST Hodpfx Ajrbh I Ijbnjn

Condition: new, empty load weight: 15,420 kg, maximum load weight: 61,080 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 900 mm, tire size: 235/75/r17,5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings Hardwood decking 30 mm thick Loading platform: Loading area in extendable design with rear bevel of approx. 500 mm x 8° 8 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 50,000 kg. Seat posts: - JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Axles and tires: BPW axles and suspension, 4th + 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lock via reverse gear and manual activation Tires 235/75 R 17.5 3PMSF Brake system: Brake system in accordance with EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, 24 volt lighting Hedpfx Abjl Sl Izjnen ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15 pole ISO-12098 Paint finish: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the bulkhead 2" kingpin One galvanized steel bulkhead approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 2 restraining shoes with holder on the bulkhead Mounting in the rear area of the gooseneck for ALU docking lights A bracket for a rotating beacon at the rear of the trailer Galvanized supports under the bevel of the loading area White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear Electro-hydraulic unit at the rear under the cargo bed A holder for the warning signs, including a socket, on the gooseneck and on the rear panel on the left and right respectively Control valves for the ramps mounted on the right-hand side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm (LxH) The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or a 40' container 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Galvanized extensions, extendable by approx. 230 mm per side Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope On the chequer plates, above the kingpin and the load floor

Condition: good (used), functionality: fully functional, mileage: 175,650 km, power: 205 kW (278.72 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 29,000 kg, tire size: 445/95 R25, axle configuration: 4x4, number of seats: 2, first registration: 05/2006, emission class: euro3, brakes: telma, suspension: hydraulics, Year of construction: 2006, operating hours: 12,347 h, machine/vehicle number: W092725006EL05016, Equipment: ABS, all wheel drive, cabin, crane, differential lock, onboard computer, parking heater, retarder, LOCATION: D - 73230 Kirchheim unter Teck - Liebherr LTM 1040-2.1 | Factory No. 051 515 - Lifting Capacity: 40 t / 2.50 m / 75% - Year of Manufacture: 2006 Hjdpex H Svdsfx Abnjn - Telescopic Boom: 10.5 - 35 m - Counterweight: 1.5 t / 5 t (6.5 t total) - Hook Blocks: 3-sheave, 22.4 t (DH), 1-sheave, 10 t - Carrier Engine: Mercedes OM 906 LA – Operating Hours: 23,632 h / 205 kW / 278 HP - Operating Hours Undercarriage (Engine): 9,560 h - Operating Hours Superstructure (Crane Operation): 14,072 h - Transmission: ZF torque converter transmission - Auxiliary Brake: Telma retarder - Drive/Steering: 4 x 4 x 4 - Tyres: 16.00 R25 (445/95 R25) Bridgestone - Mileage: 175,650 km - Safety System: LICCON 1 Other features: Additional heater in crane cab, 12 V sockets in driver’s cab and crane cab, work lights (Xenon) on slewing platform, aircraft warning light, reversing alarm. Good condition for its age, immediately operational – further details on request – available at short notice.