Compressor

Doosan 7 / 41 - N

Condition: used, Year of construction: 2016, operating hours: 945 h, Intended use: Construction Ffodpowaq D Hsfx Aa Rjt Empty weight: 900 kg Engine brand: Yanmar 4NTV88 Flow rate: 4.1 m³/m Working pressure: 7 bar Contact Sales Department for more information.

Condition: new, empty load weight: 9,650 kg, maximum load weight: 30,350 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,740 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 r17,5 zoll, Year of construction: 2026, Equipment: ABS, center pivot plate, 4-AXLE LOWBED TRAILER WITH TOP-SPEC EQUIPMENT! => HOT-DIP GALVANIZED (CHASSIS FRAME, BOGIE FRAME, ACCESS RAMPS) => FULL AIR SUSPENSION => WITH LIFTING AND LOWERING FUNCTION (REAR AXLE MODULE!) => SAF LOWBED AXLES => LASHING PACKAGE => OUTER FRAME WITH PERFORATIONS FOR ADDITIONAL LASHING POINTS => CLEAT STRIPS AT REAR OF ACCESS SLOPE => 6 LASHING POINTS IN THE EXCAVATOR ARM TROUGH AT THE REAR => LONG ONE-PIECE ACCESS RAMPS => LOW APPROACH ANGLE Permissible gross weight: 40,000 kg Payload approx. 30,350 kg Chassis frame hot-dip galvanized Bogie frame hot-dip galvanized Access ramps hot-dip galvanized Air suspension SAF axle with drum brakes EBS electronic braking system Tyres: 235/75R17.5 – 16 units Lowbed length approx. 7,160 mm Trough for excavator arm resting, approx. 3,000 x 730 x 180 mm at rear of lowbed 4 pairs of 10-ton recessed lashing rings in lowbed 2 pairs of 10-ton recessed lashing rings in raised deck 4 pairs of 3-ton lashing points on outer frame of lowbed 3 pairs of 6-ton lashing eyes on outer frame 4 pairs of stake pockets in outer frame of raised deck 4 pairs of stake pockets in outer frame of lowbed 3-meter widening kit with folding outriggers (flat, no slope) 4 x warning panels with lights Rotating beacon at rear LARGE STEEL STORAGE BOX under the loading area Fedpjhvxgzefx Aa Rjft 2 storage compartments with hinged lids in raised deck Hydraulic ramp lifters 1-piece ramps, approx. 3,150 x 750 mm Softwood floor on loading area and ramps 40,000 kg GVW only with special permit as per Section 70 => Delivery freight costs: €2.90 plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hauptmann Tel. DOLL Fahrzeugbau *Subject to prior sale and modifications!* *Price valid ex works D-86368 Gersthofen* *Sale to commercial customers only!* *Images may differ and are for general guidance only — may show/accessorise options available at extra cost*

Condition: used, Year of construction: 2016, operating hours: 1,017 h, Intended use: Construction Fsdpsv H I Sijfx Aa Rsft Unladen weight: 900 kg Engine brand: Yanmar 4TNV88-K Flow rate: 4.1 m³/m Working pressure: 7 bar Contact Sales Department for more information.

Condition: used, Year of construction: 2016, operating hours: 1,105 h, Intended use: Construction Unladen weight: 900 kg Engine brand: Yanmar 4TNV88-K Throughput: 4.1 m³/m Compressor type: Screw compressors Transport dimensions (L x W x H): 2.5x1.4x1.4 Fodpfx Ael D Tpbja Rjft Working pressure: 7 bar Contact the Sales Department for more information.

Condition: new, maximum load weight: 30,740 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift/lower system and RtR valve * Smard board for payload weight determination * Warning sign packages front & rear * Reflective contour tape on the sides and rear * Rear removable beacon light * LED lighting * Straight drawbar with 50 mm towing eye and continuously variable height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, fitted on the right side * Front closed single fender made of plastic * Rear straight steel mudguard aprons, each with spray protection (spray suppression) * Side underrun protection * Turntable platform extended by 520 mm with 45° corners and three integrated storage compartments incl. lids, lockable * Chassis made of high-strength fine-grain steel * Flooring above turntable platform made of 50 mm and in low-bed platform of 60 mm softwood * Outer planks of access ramps made of hardwood * 4 stake pockets per side (stakes not included), each with 2 t lashing point * Lashing package consisting of: 2 lashing eyes 6.4 t at the front left and right on the main frame of the turntable platform * On each side front and rear: 2 pairs of 13.4 t lashing rings on the outer frame, and 4 pairs of 10 t lashing rings per side, swiveling and retractable * Loadable in all directions and recessed into the outer frame * 2 pairs of 6.4 t lashing rings in the excavator arm recess * 8 pairs of galvanized folding outriggers for 3 m total width (except for the rear slope) * Widening planks stored in a box on the left side * Excavator arm recess above the rear axle up to the start of the ramp incline: approx. 2,100 x 740 x 190 mm * Mechanical support legs at rear * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm incl. hydraulic ramp lateral shift & load holding valve * Load area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm Fsdpfxsl Tphrs Aa Rjft * Loaded deck height: approx. 890 mm, +/- 20 mm (incl. 860 mm ramp incline) * Flow divider installed * Chassis, turntable, access ramps, folding outriggers, and mechanical support legs hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black * Tires: 235/75 R 17.5 * New vehicle without initial registration with manufacturer’s warranty * Errors and prior sale reserved * Available from CW 07/2026