Swap body with box structure

Krone BDF-System 7.45, LACK NEU in RAL 6024, FABRIKNEUE Portaltüren

Condition: new, maximum load weight: 38,000 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,550 mm, total width: 2,540 mm, total height: 3,780 mm, Year of construction: 2025, Equipment: ABS, * Humbaur HTS 30 K * Heavy-duty semi-trailer * Low loader * NEW * Immediately available * Fully galvanized * Robust construction * Overall dimensions: 12,630mm x 2,540mm x 3,780mm * Internal dimensions: 12,000mm x 2,540mm * Loading height: 890mm * Fifth wheel height: 1,230mm * Fifth wheel platform: 3,500mm * Low bed length: 8,680mm * GVW: 48,000kg * Payload: 38,000kg * Tyres: 235/75R17.5 * SAF low loader axles with lift and trailing steering axle * Air suspension with raise and lower function * Twin tyres * EBS braking system * 24-Volt lighting system * LED side marker lights * Wabco Smart Board * 2-inch king pin * Chassis frame hot-dip galvanized by immersion * Heavy-duty welded chassis frame * Climbing strips on the ramp incline * 50mm softwood flooring * Trough for excavator arm storage * 3m equipment package Cjdpfx Asr Ic Rwocvegt * Steel toolbox under the loading area * Gooseneck with 400mm front wall * 400mm foldable aluminium side walls * Storage box with lid at the front * 3 pairs of lashing rings, 6t each * 3 pairs of lashing rings, 3t each * 5 pairs of lashing rings, 10t each * 6 pairs of lashing rings, 3t each * 6 pairs of lashing rings, 2t each * Ramps with rubber covering * Spare wheel with holder on front wall * LED reversing lights * Visible surface painting on request * Further equipment configurations available upon request IMPORTANT!!!!! PLEASE READ!!!! We expressly reserve the right of prior sale, as this item is also offered on other platforms. We strongly recommend an inspection and check to prevent any misconceptions regarding condition and suitability. Inspections and checks are possible by appointment at any time and are expressly encouraged!!! The stated internal dimensions are approximate values. TRADE-IN POSSIBLE FOR ALMOST ANYTHING!!! PART EXCHANGE AND SETTLEMENT POSSIBLE!!! Exhibition site: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:00 a.m. to 5:00 p.m., Saturday 8:00 a.m. to 2:00 p.m. Always over 500 new and used trailers in stock!!! Tel.: Fax:

Condition: used, color: white, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,470 mm, 7.45 BDF steel swap body with roller shutter, multiple available. Internal dimensions approx. (L x W x H) 7.30 m x 2.48 m x 2.47 m, standard parking height. With container corners at the top, therefore stackable. Incl. forklift pockets. Color: white greyish Loading included in the purchase price, delivery possible for an extra charge. Cgodpfx Aconk Tt Ievst Please enquire about the cost of delivery by email, stating the recipient's zip code.

Condition: new, empty load weight: 10,100 kg, maximum load weight: 38,900 kg, overall weight: 49,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, tire size: 245/70 R 17,5, operation weight: 10,100 kg, Equipment: ABS, Chassis: -Sturdy welded steel frame construction with front frame cranking and flat loading platform with rear tapered section approx. 500x100 mm -Frame neck 200 mm with chamfered corners -Chamfered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area behind the rear taper) -2 kingpin positions with interchangeable 2” kingpin -Outer frame closed to the outside as perforated outer rail for lashing with tie-down straps (no chains possible) -Reinforced frame design / point load at center of gravity -Preparations for extendable loading platform wideners -With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle extending to end of vehicle -1 pair of wheel recesses in front of axle with steel covers -(Covers with Körapur coating), depth approx. 400 mm as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers -Underride guard = extended end plate -Drop-down rear support legs Ramps: -2-part special design loading ramps with mechanical extension -Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting gear (only in combination with electrohydraulic unit) -Width approx. 800 mm -Wooden ramp surface -Including traction ribs on loading ramps -Can be secured in transport position with tie-down straps -Operated via control lever, mounted at rear on right side in driving direction -Laterally shiftable via hydraulics Floor: -35 mm larch wood floor with aluminum omega profiles Landing Legs: -Mechanical 24-ton landing legs with single-side operation and load compensation Cgodjwviwkspfx Acvot Axles, Steering, and Tires: -BPW air suspension axles, 10 tons axle load each, air bellows diameter 360 mm -S-cam brakes 300/200 mm, asbestos-free brake linings -Automatic brake slack adjusters -Lift and lower device with total lift approx. 200 mm -2nd transport position via ball valve +50 mm -1st axle lifting axle (wired via EBS), fully automatic activation with mechanical emergency actuation via push button on the trailer -3rd axle as friction-steered trailing axle with electric and mechanical lock -12 steel disc wheels, 10-hole, center offset -12 tires 245/70 R 17.5 143/141J, tubeless -Including tire pressure monitoring Accessories: -Stakeboard side and rear walls on the gooseneck, approx. 400 mm high, plug-in design -Spare wheel holder -Side aluminum underrun protection -4 wheel chocks -Long license plate mount on rear end plate -1 ECE warning panel at the rear, plug-in -11 pairs of ZK 10t side lashing modules: -2x on the gooseneck -9x on the loading platform -Steel fenders with Clear-Pass -Extendable warning boards incl. 3 position lights each, at the front on the landing legs and at the rear in front of end plate, smoothly extendable up to loading width of 4,500 mm -4 holders for warning panels, plug-in, in stake pockets on the loading platform -6 pairs of side stake pockets for 100x50 mm plug-in stanchions -2 cross rows of stake pockets for 100x50 mm stanchions on the gooseneck from outer frame to main frame (1x before and 1x after kingpin positions) -3 cross rows of stake pockets for 100x50 mm stanchions on the loading platform from outer frame to main frame (1x at the front section, 1x before 1st axle, 1x after 3rd axle) -2 pairs of steel plates in the platform for container locks to accommodate 1x 20ft container -Rubber skirt mounted on underride guard -Steel shot blasting, hot-dip galvanizing of chassis and priming -Paintwork chassis/wheel hubs/outer frame i

Condition: like new (used), functionality: fully functional, Year of construction: 2023, container length: 40 ft, color: white, loading space volume: 76.4 m³, loading space width: 2,352 mm, loading space length: 12,032 mm, loading space height: 2,698 mm, Equipment: cooling unit,

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2018, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, wheelbase: 8,960 mm, color: white, Year of construction: 2018, Equipment: tail-lift, Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Cjdpfx Acjy Exc Uovjgt Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 3: Max. axle load: 9000 kg; Steering; Tyre profile left: 20%; Tyre profile right: 20% Empty weight: 9.190 kg Carrying capacity: 31.810 kg GVW: 41.000 kg Tail lift: Dhollandia, 2000 kg Registration number: OR-10-GF

Condition: new, maximum load weight: 760 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 3,130 mm, loading space width: 1,640 mm, loading space height: 1,950 mm, DEBON ROADSTER 400 TECHNICAL DATA * Trailer type: Debon Roadster 400 * Gross weight: 1,300 kg * Payload: 760 kg * Internal dimensions L: 313 cm, W: 164 cm, H: 195...201 cm (full height from approx. 1 m from front) * External dimensions L: 445 cm, W: 215 cm, H: 237 cm * Floor: aluminium panels with anti-slip ribbing, front radius section steel * Side walls: aluminium panel * Loading height: approx. 34 cm * Lashing points: 6 foldable lashing rings, mounted inside on floor rail, rated load per ring 250 kg * Frame: robust, welded and hot-dip galvanized frame * Electrics: 12V, 13-pin plug, reversing light * Tyres: 13-inch * Axle manufacturer: AL-KO or KNOTT * Number of axles: 1 * Braked axle * Centrally mounted automatic jockey wheel * Poly front-roof combination, aerodynamic shape * Side door on right in direction of travel, opening dimensions: 130 x 63 cm * Pullman suspension with coil springs and shock absorbers (factory 100 km/h certificate) * Overrun brake with automatic reversing mechanism and handbrake * Rear ramp and upper tailgate: coated steel (two-piece) * Rear ramp: inside aluminium, anti-slip, can be swung/rotated, with gas struts * Mudguards: plastic, black * Interior lighting * Rear light clusters protected and mounted in side posts Additional costs for vehicle registration document / COC certificate: €39.00 All prices incl. VAT. Optional accessories shown: Aluminium rims: €390 gross, exchange Delivery: Delivery by freight forwarding is possible, €1.50 per transport kilometre (one way, Germany-wide, from Seesen to the destination), minimum charge €270 plus VAT. Visit us also at Here you can also get your custom trailer and accessories by arrangement: BLYSS transporttechnik GmbH Dieselstr. 8 85084 Reichertshofen Tel.: BLYSS transporttechnik GmbH Burenkamp 18-20 46286 Dorsten - Wulfen Tel.: Cgjdpfxothlmke Acvjt Financing or leasing possible Images may not show the standard equipment; technical specifications subject to change (e.g., tyre sizes).

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Vehicle Information - Height: 2,715 mm - Width: 2,550 mm - Internal loading length: 13,620 mm - Internal loading height: 4,000 mm - Internal loading width: 2,480 mm - Fifth wheel height: 1,150 mm - Gross vehicle weight rating: 36,000 kg Tail lift: Dhollandia — Load capacity 2,000 kg Axles - KRONE axles with disc brakes - Tyre specification: 6x 385/65 R22.5 - Braking system compliant with ECE Regulation 13 - 2 wheel chocks - Prepared for KRONE Telematics Dry - KRONE Smart Tyre Monitoring - KRONE TPMS control unit - Spare wheel holder: basket design, behind the unit on the right Body / Attachments - Rear portal through-loading height: 2,650 mm - Panel thickness: 28 mm - Insulated roof, panel thickness: 30 mm - Internal forklift impact protection - 2 rows of horizontal slotted lashing rails set flush - 1st lashing rail height (centre above floor): 800 mm - 2nd lashing rail height (centre above floor): 1,600 mm - Double bar lock per container door Cedpfjy Ei Rpex Acvegt - 1 plastic toolbox - 2 warning signs Floor / Curtain - 30 mm thick waterproof composite floor - Tear plate at rear, recessed in floor (4x700 mm) - Floor load capacity up to 7,000 kg per forklift axle load Lighting / Electrical - Multi-function rear lights (full LED), make: Hella (Gen.2) - Includes 1 reversing lamp - 2 LED license plate lamps - LED side marker lights (with indicator function) - 4 KRONE LED roof lights Paintwork - Chassis: RAL 9005 JET BLACK - Axle hubs: RAL 9005 JET BLACK - Bodywork: RAL 9010 PURE WHITE

Condition: used, Year of construction: 2008, color: silver, overall weight: 3,100 kg, empty load weight: 16,000 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, steel Combi-Box BDF system 7.450 mm long, LACK NEW in white aluminum Steel swap body, Combi-Box, rear portal doors with internal espagnolette locks,\nWell preserved,\nDriving direction left sliding tarpaulin with steel insert slats with 3 rows of combination anchor rails, 2 slides,\nFRight smooth steel cassette with keyhole plate with 3 rows of combination anchor rails and lashing points in the scuff plate,\n\n- steel roof and wooden floor, \n\n- body and underbody NEW PAINTED in RAL 9006 white aluminum, support legs NEW telescopic in black, \n\n- body completely checked and repaired\n\n\n-UVV test\n\nAll values given are approximate dimensions in mm and kg.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther objects can be found under . Steel/aluminum insertion slats. Cgjdsvf Ngropfx Acvet