Construction equipment

Vama EHK 2200 wheel loader broom

Condition: used, Year of construction: 2014, operating hours: 11,000 h, Please provide reference number upon request: 17924 Specifications: Godpfstr T Npsx Af Rsui 2014 model Hours: Approximately 11,000 Weight: 25,500 kg Power: 141 kW Chassis (see pictures) Gjerstad S70 attachment Engcon tiltrotator SMP sanding bucket Central grease Belt width: Approx. 60 cm Width of the machine: Approx. 320 cm Cracks in the windshield (see photos) Rear view camera Extra light Rotor lamp Radio/CD Air conditioning/AC Previously under service agreement Description:Komatsu PC240, 2014 model, sold with Engcon rototilt and SMP sanding bucket.The machine has a service agreement and has been regularly serviced throughout its life. The turbo has recently been replaced. The GPS unit is not included.Last service was performed at 10,500 hours.Delivery can be done quickly. Hours: 11000 Own weight: 25500 Total Weight: 25500 Width: 320 Kw: 141 Model: PC240LC-10 = More information = Serial number: KMTPC240J55K6xxxx Please contact ATS Norway for more information

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, loading space height: 2,850 mm, total width: 2,480 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, WEB Trailer PRASQ18 SYS 7.5 trailer with body, 17.5" twin tires including plywood floor Dimensions: Length according to customer specification in 100 mm increments (optionally in 50 mm increments) Curtainsider body Side height 2850 mm from loading area to lower edge of outer rail (other heights optionally available) Width 2480mm or 2540mm Coupling height according to customer specification Driving height / loading height unloaded approx. 1030mm (top edge of floor) Spring center approx. 1100mm Axle loads: 18 000kg (2 x 9000kg) Approval: COC papers Chassis: Chassis construction consisting of welded side members and inserted cross members Cross member spacing IPE 80 approx. 400-500 mm Outer frame height approx. 125 mm high (t=4), with groove and 7 pairs of lashing eyes 5t Bogie with a 90 mm high ball rim (low maintenance) Towing equipment: Drawbar 18t rigid, height adjustment on one side Drawbar eye ø 40 mm (50 mm eye optional) Axles: Brand make (SAF/BPW/JOST) 9to 17.5" drum brake Brake: EBS brake system make Knorr or Wabco Air connections coupling head red and yellow Lifting and lowering device with two Knorr/Wabco rotary slide valves Tire pressure control Tires: 235/75 R 17.5 brand tires on steel wheel Body: Body certificate according to DIN EN 12642 XL Contour markings, ECE plates, rear doors steel sandwich profiles with 4 internal espagnolette locks, sliding roof, 90° bulkhead, steel cassettes, interior wear plate over full height 3 rows of wooden slats Sliding tarpaulin PVC12x12,880gr, Reinforced roof tarpaulin with 12x12 roof fabric Rear and front tensioning ratchet Lighting system: 24 volt with LED 15 pole. plug flashing SML Floor: Screen-printed floor 27mm crosswise laid Certificate for tested forklift axle load 7.2t according to DIN EN 283 (9t optional) Attachments: Access ladder with platform at rear right Plastic mudguards, 180 degrees Antispray mud flap One wheel chock with bracket 2 rubber bumpers at the rear corners Side collision protection on both sides Aluminum or plastic profile Coating: Painting of the chassis in RAL 9005 or nova gray 7350 Gusdpfx Asg Dkxwof Rsi Other colors at an extra charge (only if color is available in powder) KTL with zinc phosphating plus powder, maximum corrosion protection Hot-dip galvanizing (optional) Price ex works Attention!!! Pictures show special equipment Let us advise you and prepare a free and non-binding offer. Leasing, financing or installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer. Subject to errors and prior sale!!!

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,870 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, WEB? Trailer TFSSQ-27 12t PlyWood dry freight, 3-axle semi-trailer, 19.5" Dimensions: Riding height unloaded approx. 1080 (loading height) with semi-trailer height approx. 960mm Chassis length approx. 13620mm (loading length inside) Inner width approx. 2480mm (loading width) Total width approx. 2550mm Inner height approx. 2870mm Fifth wheel load max. approx. 12000kg Axle loads: 24,000kg Approval: CoC papers Chassis: Chassis made of welded longitudinal beams and through-hole cross beams Outer frame height approx. 80 mm without lashing eyes in the floor (optionally available) Support: 24 ton telescopic support winch, branded product (Jost/SAF) Axles: Branded product (SAF/BPW/JOST) 9 ton 19.5" disc brake, single tires without axle lift (option) Axle distance approx. 1310/1310mm Air suspension unit each 9t total lift approx. 180mm Brake: EBS brake system made by Knorr or Wabco Air connections coupling head red and yellow Lifting and lowering device with 1 rotary slide valve Knorr/Wabco Air tank 2x approx. 80 l in steel Tire pressure control Tires: Brand tires 445/45 R 19.5 on steel wheel Construction: Construction in plywood version (optional: ISO walls) Construction certificate DIN EN 12642 XL Steel bulkhead with 400mm steel cassettes, inside wear plate over full height Insulated roof min. 30mm (including LED Light strips running lengthways on the right and left) Side walls with Combi anchor rails running lengthways, on both sides (number and position according to customer specifications) Side walls in approx. 20mm plywood (optional: ISO walls) Side walls with reinforced base skirting board approx. 4mm galvanized folded sheet metal profile approx. 400mm high and glued and screwed to the walls. Rear portals with 4 internal espagnolette locks Door leaves made of steel sandwich profiles Lighting system: LED lighting system 15-pin connection at the front Gsdpfoi Eug Sox Af Rjui flashing SML Floor: Screen-printed floor 27mm laid transversely Certificate for tested forklift axle load 9.0t according to DIN EN 283 Attachments: Access ladder at the rear right, foldable and extendable with platform Two wheel chocks with bracket, plastic or galvanized 2 rubber bumpers at the rear corners Plastic mudguards (180°) Side collision protection on both sides, aluminum or plastic profile Coating: Chassis painted in RAL 9005 or Nova Gray 7350 other colors at an additional cost (only if color is available in powder) KTL with zinc phosphating plus powder, highest corrosion protection Hot-dip galvanizing (optional) Price ex works Attention!!! Pictures show special equipment Let us advise you and work out a free and non-binding offer. Leasing, financing or hire purchase possible! We can accommodate your wishes! Ask us - we will be happy to make you an offer. Errors and prior sale reserved!!!

Condition: used, Year of construction: 2013, operating hours: 8,270 h, Please provide reference number upon request: 19413 Specifications: - 2013 model - Certified until 07/2025 - Weight: 19,400 kg - 89 kW - Tooth bucket - Rototilt (needs parts) - Sanding bucket  - Chassis (see pictures) Godpjvgldiofx Af Rsui - Work light - AC/climate - Radio - Video available - Ready for delivery Description: 2013 CAT 318EL with rototilt, sanding bucket and tooth bucket. The Rototilt is missing 2 solenoid valves. The machine lacks central lubrication that takes place at the front of the boom (4 points) Ready for delivery. Hours: 8270 Own weight: 19400 Total Weight: 19400 Kw: 89 Model: 318EL = More information = Serial number: CAT0318EJDZF0xxxx Please contact ATS Norway for more information

Condition: new, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, loading space height: 2,930 mm, total width: 2,480 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, WEB - Trailer ZPRASQ SYS 18 M-tube 19.5" single central axle chassis with structure for 27 mm plywood floor Curtainsider structure Side height 2850mm from loading area to Lower edge of outer beam Riding height unloaded approx. 1010mm Axle loads: 18,000 kg (2 x 9000kg) Coupling height approx. 400mm unloaded (other heights optional) Chassis length approx. 6000 - 8000 mm (other lengths optional) Support load approx. 1000kg COC papers Outer frame height approx. 125 mm, with groove for lashing eyes Chassis made of welded longitudinal members and through-hole cross members 7 pairs of lashing eyes 1 set of support winches at the front 1 set of support legs at the rear Drawbar rigid, with screwed-on towing eye Towing eye ø 50mm Branded axles (SAF/BPW/JOST) Axle 9 tonnes 19.5" small disc brake without axle lift (option) EBS braking system made by Knorr or Wabco Air connections Duomatic coupling Wendelflex cable Lifting and lowering device with 1 rotary slide valve Knorr/Wabco 15-pin connector Branded tires 445/45 R 19.5 Tire pressure control Construction certificate according to DIN EN 12642 XL Contour marking, ECE signs Sliding roof, automatic locking, can be opened from the rear (optionally from the front) Pitch door 4 internal espagnolette locks made of steel sandwich profiles 1 pair of side sliding stanchions Front wall 90°, steel 400mm steel cassettes, inside Wear plate 3 rows of wooden slats (optionally aluminum) Sliding tarpaulin PVC12x12.880gr Roof tarpaulin reinforced version with 12x12 roof fabric Tensioning ratchet at the back and front LED lighting system 15-pin connection at the front Flashing SML Screen-printed floor 27mm laid across Floor: Certificate for tested forklift axle load 7.2t according to DIN EN 283 Lamp plate continuous at the back Underrun protection in welded version (rectangular tube) Gjdpfxeg Dkzrs Af Rjui Access ladder at the back right, foldable and extendable with platform Two wheel chocks with bracket, plastic or galvanized 2 rubber bumpers at the back on the corners Plastic mudguard, 180 degrees Anti-spray mud flaps Side collision protection on both sides aluminum or plastic profile Chassis painted in RAL 9005 or Nova gray 7350 other colors at an additional cost (only with Color availability in powder) KTL with zinc phosphating plus powder, highest corrosion protection Hot-dip galvanizing (optional) Price ex works Please note!!! Pictures show special equipment Let us advise you and work out a free and non-binding offer. Leasing, financing or hire purchase possible! We can respond to your wishes! Ask us - we will be happy to make you an offer. Subject to errors and prior sale!!!

Condition: new, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, PRSSQ 27 SYS Three-Axle Curtainsider with Crosswise Plywood Flooring Curtainsider body height: 2,650 mm (measured from load floor to underside of outer frame) Chassis width: approx. 2,480 mm Guedjg Dkxzepfx Af Rei Chassis length: approx. 13,620 mm Ride height unladen: approx. 1,250 mm at 1,130 mm fifth-wheel height COC (Certificate of Conformity) Chassis frame construction made from welded longitudinal beams and inserted cross members Outer frame height approx. 125 mm, 4 mm with groove for lashing rings & external lashing holes 13 pairs of lashing rings (5t certificate) Axles: Manufacturer’s free choice (SAF/BPW) Axle 9t, 22.5" with large disc brakes EBS brake system, make: Knorr or Wabco Tire pressure monitoring system Flashing side marker lights European branded tires 385/65 R 22.5 Body certificate DIN EN 12642 XL valid with two rows of wooden slats Certificate: 9t forklift axle load compliance per DIN EN 283 Certificate: 5t per lashing ring Rear portal with 4 internal locking bars, door leaves made from steel sandwich panels Sliding roof, automatic locking, opens from rear 3 rows of side curtain rollers Front wall steel, 400 mm steel cassettes inside; wear plate approx. 2.4 m Lighting system: 24V with LED multifunctional lights Floor: 27 mm phenolic film plywood installed crosswise Roof tarpaulin: reinforced, with 12x12 fabric structure Optional equipment: - Can be fitted with tail lift - Can be fitted with internal sideboards - Can be fitted with FLEXSTRAP system - Can be fitted with pallet box, spare wheel, etc. Body painted in RAL colors according to specification Chassis in RAL 9005 or MB 7350, other colors available at extra cost depending on powder availability KTL coating with zinc phosphating plus powder, maximum corrosion protection Optional: hot-dip galvanized finish Ex-works price Attention! Photos show vehicle with optional equipment Let us advise you and prepare a free, non-binding quote. Leasing, financing, or hire purchase possible! We can accommodate your requests! Contact us – we will be happy to prepare an offer. Errors and prior sale excepted!