Open trailer with tarp

WEB-TRAILER ZPRASQ Zentralachs-Curtainsider / XL

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, loading space height: 2,850 mm, total width: 2,480 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, WEB Trailer PRASQ18 SYS 7.5, trailer with body Tire size 17.5" twin tires, including plywood flooring Dimensions: Length according to customer specifications in 100mm increments (optional in 50mm increments) Curtainsider body height 2850 mm from the loading area to the lower edge of the outer frame (other heights available as an option) Width 2480mm or 2540mm Coupling height according to customer specifications Ride height / loading height unladen approx. 1030mm (top of the floor) Spring center approx. 1100mm Axle loads: 18,000kg (2 x 9,000kg) Approval: COC documents Chassis: Chassis construction made of welded longitudinal members and pierced cross members Cross member spacing IPE 80 approx. 400-500mm Outer frame height approx. 125 mm high (t=4), with groove and 7 pairs of lashing eyes 5t Turntable with one ball bearing swivel ring 90mm high (low maintenance) Bwsdeg Dkxwjpfx Akcer Coupling device: Fixed drawbar 18t, single-sided height adjustment Drawbar eye ø 40 mm (50mm eye optional) Axles: Well-known manufacturer (SAF/BPW/JOST) 9t, 17.5" drum brake Brakes: EBS braking system, manufacturer Knorr or Wabco Air connections, coupling head, red and yellow Lowering and lifting device with two rotary slide valves, Knorr/Wabco Tire pressure monitoring system Tires: Well-known brand tires 235/75 R 17.5 on steel rim Body: Body certificate according to DIN EN 12642 XL Contour marking, ECE signs, rear doors made of steel sandwich panels with 4 internal twist lock fasteners, sliding roof, front wall 90°, steel cassettes, inner wear plate over the entire height 3 rows of wooden slats Sliding tarpaulin PVC 12x12, 880g Roof tarpaulin reinforced version with 12x12 roof fabric Ratchet tensioner at the front and rear Lighting system: 24 Volt with LED 15-pole plug Flashing SML (side marker light) Floor: Screen-printed floor 27mm, laid crosswise Certificate for tested forklift axle load 7.2t according to DIN EN 283 (9t optional) Attachments: Access ladder with platform at the rear right Plastic fender, 180 degrees Splash guard, anti-spray One chock with bracket 2 rubber impact buffers at the rear corners Lateral impact protection on both sides, aluminum or plastic profile Coating: Painting of the chassis in RAL 9005 or Novagrau 7350 Other colors at an extra charge (only if color is available in powder coating) KTL (cathodic dip coating) with zinc phosphating plus powder coating, maximum corrosion protection Hot-dip galvanizing (optional) Price ex works Attention!!! Pictures show optional equipment Get advice and have a free and non-binding offer prepared. Leasing, financing or hire purchase possible! We can accommodate your wishes! Ask us - we will be happy to prepare an offer for you. Errors and prior sale excepted!!!

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,870 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, WEB – Trailer TFSSQ-27 12t Plywood Dry Cargo, 3-Axle Semi-Trailer, 19.5" Dimensions: Unladen overall height approx. 1050 mm (loading height) with a saddle height of approx. 930 mm Chassis length approx. 13620 mm (internal loading length) Internal width approx. 2480 mm (loading width) Overall width approx. 2550 mm Internal height approx. 2920 mm Saddle load max. approx. 12000 kg Axle loads: 24,000 kg Approval: CoC documents Chassis: Chassis made of welded longitudinal members and through-bolted cross members External frame version – tub for plywood superstructure, reinforced version Supports: 24-ton telescopic support legs, branded (Jost/SAF) Axles: Branded (SAF/BPW/JOST) 9-ton 19.5" disc brake, single tires Without axle lift (option) Axle spacing approx. 1310/1310 mm Air suspension unit, 9 tons each, total stroke approx. 180 mm Brakes: EBS braking system, brand Knorr or Wabco Air connections, coupling head red and yellow Raising and lowering device with 1 rotary valve Knorr/Wabco Air tanks 2x approx. 80 liters in steel Tire pressure monitoring Tires: Branded tires 445/45 R 19.5 on steel rims Superstructure: Plywood superstructure (optional: ISO walls) Superstructure certificate DIN EN 12642 XL Front wall steel with 400mm steel cassettes, internal wear plate over the entire height Iso roof min. 30mm (including LED light strips running lengthwise on the right and left) Side walls with combi anchor rails running lengthwise, on both sides (Number and position according to customer specifications) Side walls in approx. 20mm plywood (optional: ISO walls) Side walls with reinforced base scuff plate, approx. 4mm galvanized bent sheet profile, approx. 400mm high, glued and screwed to the walls. Rear doors with 4 internal twist-lock latches, door panels made of steel sandwich profiles Lighting: LED lighting system 15-pole connection at the front Flashing SML (side marker lights) Floor: Bwsdpoi Eug Sofx Akcjr Screen-printed floor 27mm laid crosswise Certificate for tested forklift axle load 9.0t according to DIN EN 283 Additional parts: Rear right access ladder, foldable and extendable with a platform Two chock blocks with holders, plastic or galvanized 2 rubber impact buffers at the rear corners Plastic mudguards (180°) Lateral impact protection on both sides, aluminum or plastic profile Coating: Painting of the chassis in RAL 9005 or Novagrau 7350, other colors at an extra cost (only if the color is available in powder coating) KTL coating with zinc phosphating plus powder coating, maximum corrosion protection Hot-dip galvanizing (optional) Price ex works Attention!!! Pictures show special equipment Get advice and have a free and non-binding offer prepared. Leasing, financing or hire purchase possible! We can accommodate your wishes! Ask us – we will gladly prepare an offer for you. Errors and prior sale reserved!!!

Condition: new, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, PRSSQ 27 SYS Three-axle curtainsider with crosswise laminated wood Curtainsider body height, side: 2650 mm from the loading area to the lower edge of the outer rail Chassis width: approx. 2480 mm Chassis length: approx. 13620 mm Unladen ride height: approx. 1250 mm at a saddle height of 1130 mm COC (Certificate of Conformity) Chassis frame construction made of welded longitudinal members and through-bolted cross members Outer frame height: approx. 125 mm, 4 mm with groove for lashing eyes and lashing holes on the outside 13 pairs of lashing eyes (5t certificate) Axles: Free choice of manufacturer (SAF/BPW) Axle: 9 tons, 22.5" with large disc brake EBS braking system, manufacturer: Knorr or Wabco Tire pressure monitoring system Flashing side marker lights European brand tires 385/65 R 22.5 Body certificate DIN EN 12642 XL, valid with two rows of wooden slats Certificate for 9t forklift axle load according to DIN EN 283 Certificate for 5t per lashing ring Rear portal with 4 internal rotating bar locks, door panels made of steel sandwich profiles Sliding roof, automatic locking, can be opened from the rear 3 sets of side sliding rails Front wall: Steel, 400 mm steel cassettes inside, wear plate approx. 2.40 m Lighting system: 24 Volt with multifunctional LED light Perforated floor: 27 mm perforated floor, laid crosswise Roof tarpaulin: reinforced version with 12x12 roof fabric Optional: can be equipped with a tail lift Bsdog Dkxzepfx Akcswr Optional: can be equipped with internal side panels Optional: can be equipped with FLEXSTRAP system Optional: can be equipped with pallet box, spare wheel, etc. Body painted in RAL colors according to specifications Chassis in RAL 9005 or MB 7350, other colors available at an extra charge, depending on powder coating availability KTL coating with zinc phosphating plus powder coating, highest level of corrosion protection Optional: Hot-dip galvanized Price ex works Attention!!! Pictures show special equipment Get advice and have a free and non-binding offer prepared. Leasing, financing, or hire purchase possible! We can accommodate your wishes! Please contact us - we will be happy to prepare an offer for you. Errors and prior sale excepted!!!