Tower crane

Liebherr 81K.1

Condition: used, Year of construction: 2022, Contact Jörg Bienek for further information. Dwjdpjuu S Hvofx Afmod

Condition: new, empty load weight: 12,900 kg, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, suspension: other, tire size: 245/70 R 17,5, color: grey, operation weight: 12,900 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered hydraulically and removed -Technical fifth wheel load: 23,000 kg -For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading area: -Low bed with external supports in extendable "SUPER LOW" design, length approx. 6,850 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking Rear chassis: -Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear -2 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the trough -2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum axle and tires: -"PENDEL-AXLE", all axles hydromechanically forced steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint, painted in a single color in "FAY-Gray-34-0260" -Technical axle load: 12,000 kg -Hydraulic axle compensation -Tires 245/70 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories: -Preparation for screw-on container positioning for 1x 20ft or 1x40ft container on the outer supports -2" kingpins Dwedpfohlz R Sjx Afmsd -A galvanized steel front wall approx. 400 mm high -One spare wheel -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Electro-hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and at the rear -European reflector signs (red-yellow) on the rear of the trailer -One holder for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -6 pairs of threaded blocks between the lashing rings under the top strap on the outer support for mounting screwable RUD rings VLBG-4 -ALU side walls and rear wall can be plugged into the gooseneck approx. 2,440 x 400 mm -The rear galvanized plug-in stanchions are removable (Length of the body approx. 2,560 mm) -Gooseneck in the rear upper area closed with a removable cover -5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Foldable extensions, approx. 230 mm per side -2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) -1 pair of steel ramps to bridge the hooks of the low bed -A painted layer of sand on the loading area as anti-slip protection -Speed sticker 80 km/h at the rear and on both sides -Dipper handle recess of the rear chassis closed at the rear with a plug-in plate -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm -Radio remote control for the steering in addition to the cable remote control, with indicator lights on the receiver as Alignment control -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 normal grease -Load pressure gauge for determining axle loads -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: used, color: yellow, Year of construction: 2020, Used TDK crane, model 81K.1 for sale: - Hoisting gear / slewing gear / trolley travel gear with frequency converter (frequency-controlled) - Jib length 45 m at 1,400 kg; or max outreach 48 m - Pure 2-fall operation; max load 6,000 kg - Hook height 26 m as per datasheet - Lattice mast tower - Stationary on base plates Djdpfxouu S Ias Afmswd - 14 counterweights of 2.5 t each - Slew radius 3.50 m - Ballasting device - Ballast tensioning system - HBC radiomatic remote control - ABB (work area limitation) - Wind measurement and warning system - Hoist rope suitable for up to six tower sections - Lighting transformer - Flight warning system with 2 continuous-beam lights - Electric central lubrication system with 1-litre reservoir - NO LOAD PLUS – no load capacity increase 81K.1#0025 = More information = Contact Jörg Bienek for further details.

Condition: excellent (used), mileage: 104,000 km, power: 368 kW (500.34 HP), first registration: 07/2019, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2019, operating hours: 2,630 h, Equipment: ABS, air conditioning, crane, cruise control, navigation system, parking heater, = Additional options and equipment = - Aluminum fuel tank - Electric windows - Electrically adjustable exterior mirrors - Low noise - Speed limiter - Intarder - Refrigerator - Air suspension - Air horn - Sun visor - Auxiliary heating - Toolbox - Xenon lighting - PTO (power take-off) Dwjdpev Tmylsfx Afmjd - Central lubrication - Central locking = Further information = Axle configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Suspension: Air suspension Rear axle 2: Twin tires; Lift axle; Suspension: Air suspension Weights Unladen weight: 25,475 kg Payload: 13,525 kg Gross vehicle weight: 39,000 kg Functional Crane: HMF 9520-K7 + JIB FJ 2200-6, year 2019, located behind the cab Body brand: HMF 9520-K7 + JIB FJ 2200-6 CE marking: yes Condition Technical condition: very good Visual condition: very good Financial information Price: on request

Condition: new, empty load weight: 7,100 kg, maximum load weight: 28,900 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 245/70 R 17.5 3PMSF, color: grey, Equipment: ABS, Loading area: Offset loading surface with rear slope of approx. 500 mm x 8° 4 pairs of lashing rings can be folded outwards (LC 5,000 daN) 2 pairs of lashing rings can be folded outwards (LC 10,000 daN) 2 pairs of lashing rings lying in the front of the cargo bed (LC 5,000 daN) 1 pair of lashing rings lying in the front of the cargo bed (LC 10,000 daN) Cut-outs in the outer frame of the cargo bed for attaching lashing straps (LC 2,000 daN) Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Axles and tires: BPW axles, air-sprung, with drum brake, with lifting/lowering function Axle tool Tires 245/70 R 17.5 3PMSF Load index (146/146F) One-piece steel ramps: A pair of galvanized one-piece steel ramps approx. 3,000 x 800 mm with approx. 48 mm thick hardwood decking Ramp with hydraulic lifting gear and hydraulically movable Maximum load per pair: 40,000 kg Brake system: Brake system in accordance with EU regulations with EBS-E (2S2M) with EBS coiled cable to the tractor unit Steel construction: Steel construction made of high-strength fine-grained steels Steel qualities: ∗∗S355J2+N/S355MC (yield strength 355MPa) ∗∗S690QL/S700MC (yield strength 690MPa) Coating: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in nova grey Rear section metallized and painted in RAL 9010 (pure white) Metallic paint is not possible Electrical system: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15 pole ISO-12098 Accessories included: Bogie with a +/- 1,750 mm long drawbar, with a drawbar eye (40 mm diameter) Coupling height 830-1,010 mm loaded Spiral cable 15/ 2x7 poles Yellow-red air couplings One mud flap at the rear of the trailer Manual and description on USB stick A bracket for a rotating beacon at the rear of the trailer European reflector plates (red-yellow) at the rear of the trailer Yellow reflective tape in accordance with EU regulations on the side and rear of the trailer Operating valves for the ramps fitted on the right-hand side of the trailer Galvanized supports under the sloping loading area Truck hydraulic connection with flow regulator Cover plates to bridge the gap between the ramps and the cargo bed One INOX tool box 1,350 x 400 x 400 mm at the front center Galvanized extensions, extendable by approx. 230 mm on each side Four warning signs approx. 423 x 423 mm with one position light, extendable by approx. 400 mm Dsdpfx Afor E Uw Rsmowd One bracket for rotating beacon on the warning signs Speed sticker 60 km/h at the rear HRM metallization (High Resistance Metallization) of the outer frame Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: used, maximum load weight: 26,300 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2004, Year of construction: 2004, Equipment: ABS, Faymonville ILO-3 3-axle inloader Condition: very good, ready for immediate use Tires: 70-95% Dwodpfx Afewm Ulzjmsd

Condition: used, overall weight: 28,500 kg, axle configuration: 1 axle, first registration: 10/2011, next inspection (TÜV): 11/2025, loading space length: 8,190 mm, loading space width: 2,530 mm, * Remote control steering Djdpfxsw Sgdxe Afmewd * Hydraulic steering * Removable gooseneck * BPW axles * Unladen weight: 9,280 kg * Main inspection (MOT): 11.2025 * Safety inspection: 05.2026 -----Internal vehicle number: 11269----Errors and prior sale reserved

Condition: new, Year of construction: 2025, Hoeflon mini crane C30e - new device 100% electric pick & carry crane Delivery time: available from stock Capacity: 9,000 kg Pick & carry capacity: 3,000 kg Max. lifting height: 14.50 m and including options 22.00 m Max. reach: 12.20 m and including options 20.00 m Dimensions L x W x H: 3.85 m x 1.20 m x 2.00 m Total weight: 8,700 kg Boom arm weight: 750 kg Counterweight weight: 2,350 kg Dwjdpfx Ajmrm D Rjfmjd Boom angle: 85 degrees Swivelling: 360 degrees Drive system with remote control 1st gear: 0.75 km/h 2nd gear: 1.5 km/h Tilt angle: 20 Grad Special options included: Fly-Jib Jib9 Cable winch: 6400 kg

Condition: used, mileage: 113,839 km, lifting height: 58,100 mm, Year of construction: 2016, Drive: Wheel Empty weight: 49,260 kg Lifting capacity: 7,000 kg Serial number: 597005 Front tire condition: 70% Rear tire condition: 70% Dwjdov Rk S Hopfx Afmsd Transport dimensions (L x W x H): 15.98 x 2.75 x 3.99 m Contact PFEIFER GROUP for further information.