Telescopic handler

Manitou MT 932 D-E3 - 4x4x4 - 9 m / 3.2 t.

Condition: used, mileage: 553 km, power: 316 kW (429.64 HP), first registration: 06/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: air conditioning, ----* Day registration on 22.06.2023! * MAN 7-inch media system * Connectivity board module * MAN speaker system * Air conditioning, manual * Multifunction steering wheel ----* Traction control (ASR) * Cruise control (FGR) * Electronic braking system (EBS) * Anti-lock braking system (ABS) * Emergency braking assistant * High-performance engine brake MAN EVBec, adjustable * Steering/lift axle ----* Euromix EMK 10D three-way tipper * HIAB X-HIDUO 228 E-6 loading crane * Remote control * 2x hydraulic outriggers * Ringfeder towing coupling Iodpfxjv Hlxge Aaistg ----Internal vehicle number: 10297----Subject to errors and prior sale. WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp

Condition: new, Year of construction: 2025, ∗JCB 403 Plus New Machine∗ - JCB Diesel by Kohler [36kW/49HP] - No AdBlue required - Lift height: 2.77m - Rated load capacity: 1,800kg - Hydrostatic drive - 20km/h - Comfort cab (ROPS/FOPS) - Hydraulic quick coupler, Weidemann type - Auxiliary hydraulics - Roof protection grille - Adjustable steering wheel - Full-opening doors - Heating - Additional rear weight 123kg - Servo single-lever control - LED work lights front/rear - Yellow beacon - Exterior mirrors right/left - Grease gun - Right armrest - Forks and bucket available Immediately ready for use, many other attachments in stock. A viewing appointment is expressly requested. Upon request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Mihm (Tel.) will be happy to assist you. More information is available on our homepage. Errors and prior sale excepted! Quick coupler system, road approval = More information = Please contact Tobias Ebert for further information. Iodpfx Asyfr I Njaistg

Condition: used, power: 74.5 kW (101.29 HP), color: red, Year of construction: 2015, operating hours: 2,181 h, Equipment: all wheel drive, cabin, Off-road - MANITOU telescopic arm forklift, type: MT 932 ST3B - 4x4x4, first use: 2016, LIFTING FORCE: 3,200 kg, LIFTING HEIGHT: 9.00 m, LONG LOADING FORKS (Fork length: 1.180 mm / pick-up width: 1,080 mm) - LOAD PROTECTION GRID, ADDITIONAL HYDRAULIC, QUICK CHANGER, 4-cylinder DEUTZ turbo diesel engine (TCD 3.6 L4 - 101.18 hp / 74.40 kW at 2.200 rpm), ALL-WHEEL and ALL-WHEEL STEERING (4x4x4) - DOG DRIVE, OVERLOAD WARNING DEVICE, large cab (low overall height, only approx. 2.300 mm) - colored glass, KAB - comfort seat, ROPS / FOPS, trailer coupling, traffic lighting, CPB, WARNING LIGHT / WARNING SOUND, exterior mirrors (3x), windscreen wipers (4x), heating / ventilation, retaining and transport eyes, OPERATING INSTRUCTIONS (in German). Tires: BKT OFF-ROAD TIRES (15.5 / 80 - 24) - approx. 98 % all-round. Transport dimensions: Length: approx. 5,850 mm (approx. 4,600 mm without forks), width: approx. 2,380 mm, height: approx. 2,300 mm. ∗∗∗ FINANCING POSSIBLE / TRANSPORT AFFORDABLE (WORLDWIDE) / ON EXPORT ONLY THE NET PRICE IS PAID (!) ∗∗∗∗ © pb - - - - - - - - - - - - - Rough terrain telescopic forklift MANITOU, type: MT 932 ST3B - 4x4x4, first use: 2016, LIFTING FORCE: 3.200 kg, LIFTING HEIGHT: 9.00 m, LONG FORKS (fork length: 1.180 mm / width admission: 1.080 mm) - PROTECTION LOAD GUARD, ADDITIONAL HYDRAULIC, QUICK CHANGER, 4-cylinder DEUTZ diesel-engine (type: TCD 3.6 L4 - 101.18 PS / 74.40 kW at 2.200 rpm), 4-WHEEL-DRIVE (4WD) and ALL-WHEEL-STEERING SYSTEM (4x4x4) - CRAB STEERING (dogway), OVERLOAD PROTECTION SYSTEM, big driverhouse (low height, only approx. 2.300 mm) - colorglass, KAB - comfortseat, ROPS / FOPS, follower coupling, road lightnings, CPB, WARNING LIGHT / WARNING RING, back view mirror (3x), windshield wiper (4x), heating / ventilation, hold- and transporthooks, OPERATION MANUAL (in german). Tyres: BKT ROUGH TERRAIN TYRES (15.5 / 80 - 24) - all around approx. 98 %. Transport dimensions: see above. ∗∗∗ EQUIPMENT IS FINANCEABLE in nearly all european countries / TRANSPORTATION WORLDWIDE POSSIBLE at good conditions / EXPORT: ONLY THE NET AMOUNT NEEDED TO PAID (!) ∗∗∗∗ © pb Isdpfxjvf E Nps Aaijtg

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the length of the loading area, length approx. 3,750 mm, with a bevel at the rear of approx. 850 mm x 10° -Can be raised and lowered hydraulically, stroke +- 250 mm including hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For tractor units: 6 x 4 and 8 x 4 Loading area: -Loading area in extendable design, length approx. 11,000 mm with a bevel at the rear of approx. 500 mm x 10°. -A recess in the loading area and in the bevel to accommodate the excavator bucket handle approx. 4,240 x 900 x 440 mm -Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically foldable ramp tips. -Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards -25 mm "Super Grip" rubber floor and approx. 5 mm sheet metal floor as additional reinforcement on the slope of the loading area -20x30 mm square climbing rails, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steered -The steering behavior of the first two axles can be optimally adjusted to the length of the loading area both mechanically and hydraulically. -Hose rupture valve on the axle compensation cylinder with automatic RESET function. -Hydraulic cylinder with shut-off valves and pins for securing in the raised position. -245/70 R 17.5 3PMSF Accessories included: -Steel bulkhead, pluggable, approx. 400 mm high -Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile -1 spare wheel -Outer support of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screwable lashing rings included -Checker plate covering above the gooseneck -On the gooseneck 1 pair of pluggable aluminum side walls on the side, approx. 400 mm high, anodized -On the gooseneck a pluggable aluminum rear wall, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide -4 Brake shoes -4 axle load gauges -Mechanical downpipe supports at the front -1 one-piece INOX tool box, approx. 2,480 x 340 x 390 mm -Mechanical downpipe supports at the front Iodpfx Ajk Af Svjaietg -Continuous sheet metal covering on the loading area with a painted layer of sand to prevent slipping -1 intermediate table, approx. 500 mm wide, for the pull-out, with long holes for hanging and movable bridging elements -Painted sand coating on the support surfaces of the intermediate table -Mechanical locking for locking the intermediate table to the pull-out -8 pairs of stake pockets in the outer frame -Extensions (galvanized) extendable by approx. 230 mm per side -1 pair of hydraulic. Rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electro-hydraulic unit -Widening planks, loose, in reinforced steel U-frame -Radio and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) Itjdpfx Aorgzv Neaieg * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: used, power: 45.5 kW (61.86 HP), fuel type: diesel, color: white, operation weight: 2,789 kg, lifting power: 2.049 kg/m, lifting height: 2,781 mm, axle configuration: 2 axles, digging bucket width: 1,600 mm, Year of construction: 2019, operating hours: 984 h, Equipment: additional headlights, air conditioning, cabin, hydraulics, onboard computer, standard shovel, Track loader BOBCAT, type: T 450, year 2019, operating weight: 2,789 kg, SHOVEL - width: approx. 1,600 mm, QUICK SWIVEL, ADDITIONAL HYDRAULIC (2 x for attachments), lifting capacity: 665 kg, tipping load: 2,049 kg, transfer height: 2,781 mm, 4-cylinder BOBCAT diesel engine (type: D24NAP - 61.88 HP / 45.50 kW at 2.600 rpm), BOBCAT RUBBER CHAINS (width: 320 mm), 3 castors per side, FULL CABIN WITH DOOR and sliding side windows, ROPS / FOPS, BOBCAT comfort seat, WORK SPOTLIGHT (front), lighting system (rear), windshield wiper, CPB, AIR CONDITIONING, heating / ventilation, retaining and transport lugs. Transport dimensions: Length: approx. 3,216 mm (approx. 2,499 mm without bucket), width: approx. 1,600 mm bucket width (approx. 1,397 mm machine width), height: approx. 1,976 mm. ∗∗∗FINANCING POSSIBLE / TRANSPORT AFFORDABLE (WORLDWIDE) / ON EXPORT ONLY THE NET TOP PRICE IS PAID (!) ∗∗∗∗ © pb - - - - - - - - - - - - - - - - - - - - - - - - Tracked loader BOBCAT, type: T 450, year: 2019, weight: 2.789 kg, SHOVEL - width: approx. 1.600 mm, QUICK CHANGER, ADDITIONAL HYDRAULIC (2 x for cultivation devices), capacity: 665 kg, tipping load: approx. 2.049 kg, over load height: 2.781 mm, 4 cylinder BOBCAT diesel-engine (type: D24NAP - 61.88 HP / 45.50 kW at 2.600 rpm), BOBCATRUBBER-TRACKS (width: 320 mm), 3 castors each side, CLOSED CABINE WITH DOOR and adjustable side windows, ROPS / FOPS, BOBCAT - comfortseat, WORKINGFLOOTLIGHT (in front), lighting (behind), windshield wiper, CPB, AIRCONDITION, heating / ventilation, hold- and transport hooks. Transport dimensions: see above. Price is net. ∗∗∗ EQUIPMENT IS FINANCEABLE in nearly all european countries / TRANSPORT WORLDWIDE POSSIBLE at good conditions / EXPORT: ONLY THE NET AMOUNT NEEDS TO BE PAID (!) ∗∗∗∗ © pb Itodst Hf Idspfx Aaiog

Condition: used, Year of construction: 2023, operating hours: 663 h, power: 84 kW (114.21 HP), Equipment: air conditioning, front power take-off, front-end loader, 211 S VARIO GEN-3 (0010) Fendt Tractor (0020) L011 Power Setting2 (0030) K120 Front Linkage Cat. 2 (0040) K155 Front PTO 1000 rpm (0050) H172 Load Sensing System with Variable Displacement Pump (0060) H201 External Hydraulic Valve Operation (0070) H200 Power-Beyond (0080) H163 Pressureless Return Rear (0090) H078 Additional Valve DW 1/3 Rear UDK (0100) H089 Additional Valve DW 1/4 Rear UDK Itsdpfjynu A Ijx Aaieg (0110) C219 LED Tail/Indicator Lights (0120) C182 Mechanical Cab Suspension (0130) C167 Steering Wheel with Spinner Knob (0140) C190 Additional Front Lighting (0150) C070 Air Conditioning (0160) C226 Daytime Running Lights (0170) C124 Emergency Package (0180) C170 Auxiliary Equipment Mounting Bracket (0190) C060 Rear Wiper and Washer (0200) C198 Roof Work Lights Front LED (0210) C207 A-Pillar Work Lights LED (0220) C260 Roof Work Lights Rear LED (0230) A057 Front Axle Suspension (0240) A160 Automatic Hitch with 38 mm Pin (0250) A132 DL - Supply System / 2-Line System (0260) A073 Swivelling Front Fenders (0270) F105 FL - 3rd Hydraulic Circuit (0280) F098 Fendt CARGO 3X/65 Front Loader DW (0290) F116 FL - Suspension System DW (0300) R124 440/65R24 128D TB -40 8 DW15LX24 (0310) R326 540/65R34 145D TB 30 8 DWW18LX34 33LFTN-D5

Condition: used, power: 26.1 kW (35.49 HP), fuel type: diesel, color: white, operation weight: 1,860 kg, maximum load weight: 915 kg, lifting power: 454 kg/m, lifting height: 2,633 mm, tire size: 27 x 8.50 - 15, tire condition: 98 %, axle configuration: 2 axles, Year of construction: 2015, operating hours: 734 h, Equipment: additional headlights, cabin, hydraulics, onboard computer, standard shovel, BOBCAT skid steer loader, type: S 100, first use: 2016, operating weight: approx. 1,860 kg, 4-cylinder KUBOTA diesel engine (type: V1505 - approx. 35.50 hp / 26.10 kW at 3,000 rpm), SHOVEL (width: approx. 1.340 mm) - QUICK CHANGER, ADDITIONAL HYDRAULIC, Payload: 454 kg, Tipping load: 915 kg, Transfer height: 2,633 mm, ROPS / FOPS, Lighting system, WORK HEADLIGHT (front), Comfort seat, Holding and transport lugs, Tires: BKT TIRES (27 x 8.50 - 15) - approx. 98 % all-round. Transport dimensions: Length: approx. 2,800 mm (approx. 2,260 mm without bucket), width: approx. 1,340 mm, height: approx. 1,960 mm. FINANCING POSSIBLE / TRANSPORT AFFORDABLE (WORLDWIDE) / ON EXPORT ONLY THE NET PRICE IS PAID (!) © pb - - - - - - - - - - - - - - - - Skid steer loader BOBCAT, type: S 100, first use: 2016, weight: approx. 1.860 kg, 4-cylinder KUBOTA-Diesel engine (type: V1505 - approx. 35.50 HP / 26.10 kW at 3.000 rpm), SHOVEL (width: approx. 1.340 mm) - QUICK CHANGER, ADDITIONAL HYDRAULIC, payload: 454 kg, tipping load: 915 kg, overload height: 2,633 mm, ROPS / FOPS, lighting, WORKINGFLOOTLIGHT (in front), comfort seat, hold- and transport hooks. tires: BKTROUGH-TERRAIN-TYRES (27 x 8.50 - 15) - all around approx. 98 %. Transport dimensions: see above. EQUIPMENT IS FINANCEABLE in nearly all european countries / TRANSPORTATION WORLDWIDE at good conditions / EXPORT: ONLY THE NET-AMOUNT NEEDS TO BE PAID (!) © pb Iedpotrd Ruofx Aaietg

Condition: new, Year of construction: 2022, Equipment: all wheel drive, &gt, new machine &gt, Manufacturer FAE &gt, Type radio remote controlled mulching caterpillar &gt, model RCU 55 Standard equipment: &gt, Kohler KDI 1903 engine with turbocharger and intercooler &gt, DOC/DPF exhaust gas aftertreatment &gt, Hydrostatic drive &gt, Hydrostatic drive for attachments &gt, Auxiliary hydraulics for implements &gt, Load control function (Load Control) &gt, Quick attachment plate with tilt and float system &gt, Independent hydraulically variable track width 1350 mm - 1750 mm &gt, High-profile rubber tracks and bogie roller system &gt, Combined aluminum radiator with anti-clogging slats &gt, Proportional reversible fan with hydraulic control &gt, Ergonomic joystick controls &gt, 3.5 inch LCD color display on the remote control &gt, Remote control with two batteries and battery charger on board the machine &gt, 7-inch LCD color display on the machine &gt, LED work lights Itjdpfx Aajr Ivznjijg Technical data: &gt, engine output 56 hp &gt, exhaust emission stage EU Stage V &gt, traction pumps 2 - EP control - 28 cc - Danfoss &gt, Traction motors 2 - HY control - 30 cc - Danfoss &gt, Max. Travel pressure 325 bar &gt, Pump attachment 1 - EP control unit - 32 cc - Danfoss &gt, Max. Mulcher pressure 300 bar &gt, Hydraulic oil tank - 47 l &gt, Fuel tank - 42 l &gt, Track chain 72 pitch - 250 mm width - High profile &gt, Track rollers 5 + 5 HD style - Triple flange - Bogie sys (4 + 4) &gt, Front Idler / Tensioning Group triple flange - Automatic tensioning system &gt, Voltage 12 V &gt, Max. Forward speed 7 km/h &gt, Max. Reverse speed 7 km/h &gt, gradeability 55° - all directions &gt, Ground pressure 2340 kg (standard equipment, std. track) &gt, Ground Pressure 0.36 kg / cm2 Attachments - Forestry mulcher &gt, type BL1/RCU 125 &gt, working width 1240 mm &gt, total width 1532 mm &gt, weight 560 kg &gt, rotor diameter 310 mm &gt, number of blades Mini C/3 - 24 pieces Attachments - Hammer flail mulcher &gt, type PML/RCU 150 &gt, working width 1496 mm &gt, total width 1724 mm &gt, weight 410 kg &gt, rotor diameter 355 mm &gt, Number of flails PML hammer flails - 24 pieces

Condition: new, maximum load weight: 65,400 kg, overall weight: 93,400 kg, axle configuration: > 3 axles, Year of construction: 2025, Pos 1. Type STZ-VP 6 (245) (2+4) with pendle axles The specified technical data are only valid when used with a 4-axle tractor unit with the following specifications: Dimension a: 5,400 mm Saddle height (loaded): 1,300 mm Weights Speed: 80 km/h - Fifth wheel load: 22,000 kg - Axle load: 6 x 12,000 kg - Permissible total weight: 94,000 kg - Tare weight approx.: 29,600 kg - Payload approx.: 64,400 kg (depending on load chart / easyLOAD calculation) Dimensions - Dimension b: 18,765 mm Iodpswg N N Iefx Aaiotg - Overall train length: 24,165 mm - Vehicle width: (please specify) - Gooseneck length x width: 3,700 mm x 2,480 mm - Saddle height (loaded): 1,300 mm - Steering lock radius front/rear: 1,370 mm / 2,735 mm - King pin: 3.5'' Front 2-axle chassis - Wheelbase: 1,510 mm - Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S - Steering axle arrangement: counter-steered 14,400 mm flatbed (outer beams) single extendable with split - Length x width: 7,000 mm x 2,750 mm - Extendable by / to max.: 3,400 mm / 10,400 mm - Deck height: 300 mm - Plus 4,000 mm extension beam incl. - Loading height, loaded: approx. 450 mm Rear 4-axle chassis - Wheelbase: 3 x 1,510 mm - Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S - Steering axle arrangement: forced steering