Telescopic loader

Merlo TF 33.7-115

Condition: used, power: 85 kW (115.57 HP), overall weight: 6,500 kg, operation weight: 6,500 kg, maximum load weight: 6 kg, Year of construction: 2024, operating hours: 682 h, maximum speed: 40 km/h, Operating hours: 682, Initial registration: 07.11.2024. Standard equipment / technical data: Maximum load capacity 3,300 kg, maximum lifting height 6,600 mm, maximum reach 3,500 mm, length to carriage 4,310 mm, width 2,100 mm, height 2,120 mm, total weight with load forks 6,500 kg, total weight without load forks 6,330 kg. Engine: 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled, power: 85 kW (115 hp), 2,300 rpm, Stage V, diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR). Hydrostatic drive: Pump electronically controlled with variable displacement, motor: variable motor, EPD TOP including optional automatic speed increase. Mineral hydraulic oil HVI 46. Transmission: 2 gears, electro-hydraulically controlled, Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h. Cabin: Enclosed cabin, split door, 360-degree all-round visibility, GRAMMER air-suspended seat with safety lap belt, ROPS/FOPS approved, heating, front, roof and rear window wipers, sun visor, 4x1 joystick, electronic with capacitive release including direction of travel switch. Telescopic boom: 2-piece with electronic end-of-stroke damping (Soft Stop). Carriage: quick-change system, type "ZM2", hydraulically controlled from the cabin. Steering: hydraulic steering, 3 steering modes: all-wheel drive, front-wheel drive, crab steering. Drive: permanent all-wheel drive. Axles: front axle fixed, rear axle oscillating. Braking system: servo-assisted disc brakes on all four drive axles, automatically acting parking brake when the engine is stopped. Hydraulic system: pump with variable displacement, type "LOAD SENSING", flow rate work hydraulics: 125 l/min, flow rate hydraulic fan: 46 l/min, total flow rate: 171 l/min, working pressure: 210 bar, flow-sharing control block. Electrical system: 12 V, battery with 100 Ah, alternator 120A, stabilization control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, attachment recognition and overload cut-off. Tires: 400/70-20. Standard equipment: servo brake, hydraulic oil cooler, rear plate for mounting a trailer hitch, hydraulic reversing fan, radio preparation, work lights on the cabin (2 front, 2 rear), V2001 preparation for additional function on the boom head, 2 hydraulic connections on the boom head, load protection grid on the carriage, lighting for road travel, automatic battery disconnect switch, electrical connection cable in the boom, acoustic signal when reversing, boom cylinder support for securing. Optional equipment: EU approval as a tractor / agricultural tractor 40 km/h including trailer hitch, height adjustable, self-locking, 30/32 mm pin, including connection for trailer lighting, air conditioning, vibration damping on the boom (B.S.S.), LED rotating beacon on the cabin roof (approval is the customer's responsibility!), LED work lights on the cabin (2 front, 2 rear) instead of the standard halogen spotlights, 2 work lights at the end of the first arm (basic arm), rear hydraulic connection with separate control. Credpfxozdmtpe Ak Tsg

Condition: used, Year of construction: 2016, operating hours: 1,885 h, load capacity: 2,500 kg, lifting height: 5,850 mm, mast type: telescopic, construction height: 1,900 mm, power: 55.41 kW (75.34 HP), Equipment: cabin, pallet forks, Off-road telescopic forklift MANITOU, type: MT 625 ST3B - 4x4x4, first use: 2017, HEIGHT ONLY approx. 1,900 mm (width only approx. 1,880 mm), LIFTING CAPACITY: 2,500 kg, lifting height: 5.85 m, LONG LOADING FORKS (fork length: 1,200 mm / width of fork mount: 1,050 mm) - QUICK CHANGER, ADDITIONAL HYDRAULICS, 4-cylinder KUBOTA TURBO diesel engine (type: V3307 - 75.34 HP / 55.40 kW at 2,600 rpm), ALL-WHEEL DRIVE and ALL-WHEEL STEERING (4x4x4) - CRAB STEERING, CPB, OVERLOAD WARNING DEVICE, large driver's cab (low height, only 1,900 mm) - tinted glass, GRAMMER - comfort seat, ROPS / FOPS, trailer coupling (with power connection), traffic lighting, WARNING LIGHT, outside mirrors (3x), windshield wipers (2x), heating / ventilation, OPERATING INSTRUCTIONS (in German). Tires: BKT OFF-ROAD TIRES (12 - 16.5) - approx. 98% all around. Transport dimensions: length: approx. 5,120 mm (approx. 3,780 mm without fork), width: approx. 1,880 mm, height: approx. 1,900 mm. FINANCING POSSIBLE / CHEAP TRANSPORT (WORLDWIDE) / FOR EXPORT YOU ONLY PAY THE NET PRICE (!) © pb - - - - - - - - - - Rough terrain telescopic forklift MANITOU, type: MT 625 ST3B - 4x4x4, first use: 2017, HEIGHT ONLY approx. 1,900 mm (width only approx. 1,880 mm), LIFTING FORCE: 2,500 kg, lifting height: 5.85 m, LONG FORKS (fork length: approx. 1,200 mm / width fork admission: 1,050 mm) - QUICK CHANGER, ADDITIONAL HYDRAULIC, 4-cylinder KUBOTA TURBO-diesel engine (type: V3307 - 75.34 HP / 55.40 kW at 2,600 rpm), 4-WHEEL-DRIVE (4WD) and ALL-WHEEL-STEERING SYSTEM (4x4x4) – CRAB STEERING (dogway), CPB, OVERLOAD PROTECTION SYSTEM, big driver house (low height, only 1,900 mm) – color glass, GRAMMER – comfort seat, ROPS / FOPS, follower coupling (with power connection), road lightnings, WARNINGLIGHT, back view mirror (3x), windshield wiper (2x), heating / ventilation, OPERATION MANUAL (in German). Tires: BKTROUGH TERRAIN TIRES (12 – 16.5) – all around approx. 98%. Transport dimensions: see above. EQUIPMENT IS FINANCEABLE in nearly all European countries / TRANSPORTATION WORLDWIDE POSSIBLE at good conditions / EXPORT: ONLY THE NET AMOUNT NEED TO PAID (!) © pb Csdpjvzqwqsfx Ak Torg

Condition: good (used), machine/vehicle number: 14451, Year of construction: 2022, operating hours: 3,623 h, load capacity: 3,500 kg, lifting height: 6,600 mm, free lift: 1,000 mm, construction height: 2,240 mm, fork length: 1,200 mm, front tire size: 405/70-24, rear tire size: 405/70-24, overall weight: 6,800 kg, enginetype: Diesel, manufacturer: Merlo Crodpfxsw Aylle Ak Tog

Condition: used, power: 105 kW (142.76 HP), Year of construction: 2022, operating hours: 1,354 h, maximum speed: 40 km/h, Operating hours: 1354, First registration: 10/11/2022. Basic equipment / technical data: max. load capacity 4,200 kg, max. lifting height 7,000 mm, max. outreach 3,800 mm, length to carriage 4,730 mm, width 2,310 mm, height 2,530 mm / 2,590 mm (CS activated), total weight with forks 8,170 kg, total weight without forks 8,000 kg, engine 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled, power: 105 kW (143 hp) at 2,300 rpm, hydraulic reversing fan, Stage V, diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR), hydrostatic drive, pump: electronically controlled with variable flow rate, motor: swashplate motor, EPD TOP including optional automatic speed increase, mineral hydraulic oil HVI 46, transmission 2 gears, electro-hydraulically controlled, Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h, cab: enclosed cab, split door, 360-degree all-round visibility, V3611 GRAMMER air-suspended seat with safety lap belt, ROPS/FOPS tested, heater, front, roof and rear window wipers, sun visor, 4x1 joystick electronic with capacitive activation including direction switch, CS = hydropneumatic vibration damping of the cab, telescopic boom 2-part with electronic end damping "Soft Stop", carriage quick-change system type "ZM2" hydraulically controlled from the cab, steering: hydraulic steering, 3 steering modes: all-wheel drive, front-wheel drive, crab steering, drive: permanent all-wheel drive, axles: front axle fixed, rear axle oscillating, braking system: servo-assisted disc brakes on all four drive axles, automatic parking brake when engine is stopped, frame construction: in high-strength steel, hydraulic system: pump with variable flow rate of type "LOAD SENSING", flow rate working hydraulics: 150 l/min, flow rate hydraulic fan: 46 l/min, total flow rate: 196 l/min, working pressure: 250 bar, flow-sharing control block, electrical system: 12 V, battery with 100 Ah, alternator 120 A, stability control: simplified Merlo ASCS system (ASCS-light) with full electronic stability control, audiovisual signal, implement recognition and overload cut-off, tires: 460/70 R 24 Michelin XMCL, standard equipment: servo brake, hydraulic oil cooler, rear plate for mounting a trailer hitch, hydraulic reversing fan, radio preparation, work lights on the cab (2 front, 2 rear), preparation for additional function at the boom head, 2 hydraulic connections at the boom head, load protection grille on the carriage, lighting for road travel, automatic battery master switch, electrical connection cable in the boom, acoustic signal when reversing, lifting cylinder support for securing, optional equipment: EU approval as a tractor / agricultural tractor 40 km/h including trailer hitch, self-locking, 30/32 mm pin, including connection for trailer lighting, height-adjustable version recommended for compact and medium, air conditioning, vibration damping on the boom (B.S.S.), LED rotating beacon on the cab roof (approval is the responsibility of the customer). Csdpfx Ajtu Sztok Torg

Condition: used, Year of construction: 2026, operating hours: 5 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 55 kW (74.78 HP), tire condition: 100 %, front tire size: 12 R, rear tire size: 12 R, empty load weight: 4,710 kg, total length: 3,894 mm, color: other, maximum speed: 20 km/h, Special equipment: 3rd valve, full cab, CE certificate, Description: The MT 625 H telehandler is designed for construction site work on new buildings and for renovations on low buildings. The compact, 1.80 m wide and less than 2 m high machine fits easily through doors and can move well on congested construction sites. Its turning radius of 3.30 m and the 3 available steering modes ensure excellent maneuverability. This telehandler is easy to operate and equipped with an ergonomic dashboard and the JSM joystick, which guarantee easy maneuverability. The MT 625 H has a lifting capacity of 2.5 t and a lifting height of 5.85 m. Its 75 hp engine enables a speed of 25 km/h. Maintenance work is facilitated by the large hood opening. The 90-liter gear pump enables simultaneous movement of the boom and telescopic boom for increased productivity. Crsdpev Nblnefx Ak Tsg