Walking floor semitrailer

KNAPEN K100 SCHUBBODEN, NEUFAHRZEUG, 10MM BODEN, LIFTACHSE, FUNK

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Version with continuous chassis, newly manufactured in self-supporting ALU construction with corresponding reinforcements in the lower chord for particularly high stability and strength, cross member 140mm high reinforced version (for high floor load) additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to support structure Axles and suspension: Disc brake 22.5, Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA readable in the SZM (display), 1st axle with starting aid (new EC regulation, without SZM equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels: 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on steel rims silver, 11, 75x22.5 ET 120 Kingpin: 2" - screwed into a 10 mm thick plate Rodpfx Ajfi Nmwjhzol Fifth wheels: mechanical landing gear with two speeds, 2x 20 tons drawbar load with swivel foot Brake system: according to E.G. standard, EBS E system Wabco with RSS system (Roll-Stability-Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear, ALU air reservoir system Electrical system: according to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the ALU rear end, 24 volt system with 1x15 pole and 2x7 pole socket, with side outline lights in LED design, 2 reflective panels on the rear, front pole lights 2x white, rear 2x red, 2 sep. halogen reversing lights integrated in the U-protection Body/body: Body fully welded on the inside, reinforced side walls Side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400 aluminum trough, side walls 30mm thick ALU plank profiles (2-3 mm) 600mm wide completely welded in with bottom and top chord, plank profiles fully welded inside, floor laid as a moving floor system on 140mm ALU cross beams, floor stacker load approx. 9 to/m2 Cross beams mounted correspondingly narrow (approx. 350mm), design, special aluminum corner profiles in bevelled design smooth rear wall in straight design with 2 ALU hinged doors 50/30mm thick with 2 espagnolettes Locks in welded-in ALU rear frame fixed in Teflon bearing and Inox bearing, Doors secured in open position with one chain on each side, hard wear plates on the side walls approx. 2000x1500x4mm fully welded, moving residual emptying wall with Kevlar tarpaulin approx. 1800mm long plus side brushes with Kevlar tarpaulin seal, service door in front wall with ladder turning inwards Hydraulic system: Moving floor system in the floor with hydraulically moved ALU profiles on ALU square profiles with approx. 880 PE-HD sliders plus anti-lifting plain bearings, type CF 10mm floor version, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate possibility for connection of the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design still to be specified, operating pressure 190-max.240 bar, ALU end pieces welded into the sliding floor, electrical operation behind left with remote control integrated in a lockable watertight box, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash plates above the wheels, 1 ALU e-wheel holder, lateral ALU collision protection in folding design, 1 tool box approx. 860x460x400mm in plasti

Condition: used, maximum load weight: 35,000 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2026, loading space length: 12,213 mm, loading space width: 2,475 mm, loading space height: 2,300 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,856 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle AGRICULTURAL walking floor SANH 70 cbm First registered 05/ 2024, in new condition Dimensions i.L. (LxWxH) 12,213 x 2,475 x 2,300 mm Volume approx. 70 cbm Empty weight only 7,010 kg Fifth wheel height approx. 1,250 - 1,300 mm Total height approx. 3,850 mm Aluminum short chassis over the axles SAF axles with large disc brakes, 430 mm, reinforced "Off-Road" version Wabco Trailer EBS with RSS stabilization system 1st axle LIFT AXLE 3rd axle self-steering Rsdev Dz Ixspfx Ahzel Tires 6-fold 385/65 R 22.5 ALUMINUM drop supports full load (2x 10 t.) 4x LED work lights Cargofloor moving floor agricultural version with 15 boards 6 mm smooth End caps aluminum welded RADIO remote control Side wall panels complete welded (grain version) rear portal support pivots at the top hydraulic connections at the top and also at the bottom of the support legs roof crossbar reinforced version, galvanized integrated grain discharge funnel at the rear, outlet opening downwards, operation from the side RENTING is the new BUYING, also available from us as a full-service rental-----

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Rodpogcw Rmefx Ahzsl Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, -Panama tarpaulin 900g -10 mm floor -V-plates 2000x1500x4 -Service door on the front wall -12 pairs of lashing eyes in the front wall Chassis: Reinforced version with continuous chassis, new structure manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version Axle and suspension "disc brake 22.5" Jost axle units version, 3*9 tons with DCA - air suspension, lifting and lowering, Wabco Smartboard, electronic brake wear system BVA, 1st axle with traction aid (without tractor unit equipment) Tires and wheels 6 wheels with tires of size 385/65 R 22.5 premium tires Ww. on steel rims, 11, 75*22.5 ET 120 Seat post Redpfx Aofi Nmpehzol mech. Support winches, 2x20 ton support load Braking system EBS E-system Wabco with RSS system (Roll Stability Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear Electrical system According to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the aluminum rear end, 24 volt system with 1*15-pin and 2*7-pin socket, with side outline lights in LED design 2 separate LED reversing lights integrated in the U-protection, Structure/trough: "structure fully welded inside" reinforced side walls Aluminum trough, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, ALU front wall with 600 mm plank profile 2-3 mm thick in straight design, with 2 ALU wing doors 50/30 mm thick, running residual emptying wall with Kevlar tarpaulin approx. 1,500 mm long plus side with Kevlar ? plan seal Hydraulic system: ?Cargo ? Floor? sliding floor system Sliding floor system in the floor with hydraulically moved ALU ? profiles on ALU ? Square profiles with approx. 880 PE-HD sliders, type CF 8 mm floor version, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, operating pressure 190 - max. 240 bar, ALU end pieces welded into the moving floor, without hydraulic hoses Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 1 ALU E wheel holder, side aluminum collision protection in foldable version, 1 tool box approx. 860*460*400 mm in plastic, 3.7 m aluminum ladder, roll-up tarpaulin approx. 660gr./m2 with roll-up tarpaulin system including roll-up slats if required with side. Tension belts or with quick release, walkway on the front wall with access, 3 steel bows with locking mechanism that can be swung out and locked, aluminum protective cover with hinges that can be folded down for lighting, etc... +590¤ transfer costs Empty weight: approx. 7,700 kg Offer and images subject to change

Condition: used, mileage: 5,200 km, power: 90 kW (122.37 HP), gearing type: automatic, fuel type: diesel, color: green, overall weight: 8,500 kg, empty load weight: 5 kg, maximum load weight: 2,900 kg, lifting height: 6,150,000 mm, number of seats: 1, first registration: 01/2016, operating hours: 5,200 h, total height: 46,800 mm, driver cabin: other, wheelbase: 2,850 mm, Boom 6 m, tires new and as good as new, various hydraulic connections renewed, lifting capacity 3,500 kg, with pallet fork and shovel, engine power 90 KW, 3,621 m³, wheelbase 2,850 mm, lifting capacity with max. boom 1.35 to, fully functional, max. load . 8,500 kg Note Despite careful checking of all our prices, it is not uncommon for errors to creep in. Some of these are caused by transmission errors in the systems of the various platform providers. However, errors on our part cannot be ruled out either. We would therefore like to point out that all information is provided without guarantee and does not constitute a legal claim. Nor can a price label be declared as part of the contract. If you attach particular importance to a specific feature of our property, please let us know when you sign the contract. Thank you for your understanding! Redjvikp Njpfx Ahzel - .

Condition: new, functionality: fully functional, empty load weight: 7,900 kg, maximum load weight: 31,100 kg, overall weight: 44,000 kg, axle configuration: 3 axles, loading space volume: 92 m³, tire condition: 100 %, Year of construction: 2025, operation weight: 39,000 kg, Equipment: ABS, New Legras FMA 92 m3 moving floor semi-trailer Rsdpsuc Sw Njfx Ahzjl Chassis with self-supporting body or full frame from front wall to doors SAF Intradisc+ CD axles, alloy rims, premium tires 1st axle liftable, 3rd self-steering LEGRAS FMA Type 10QUALIMAT floor, Cargo Floor hydraulic system, remote control Side walls 3/2 mm, doors with 4 locking bars Manual tarp cover, walkway with double access ladder Full LED Shapeline lighting, 4x work lights Toolbox, water tank, EBS computer, and standard equipment Various models available

Condition: used, Year of construction: 2022, operating hours: 291 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,130 mm, tire condition: 100 %, color: other, Attachments: Sideshift, Special equipment: 3rd valve, 4th valve, rear working light, front working light, roof cover, Rsdpfx Aou Supvohzol

Condition: used, empty load weight: 7,840 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2019, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, loading space volume: 97 m³, suspension: air, tire size: 385/55 R22,5, wheelbase: 1,310 mm, color: silver, Equipment: ABS, Drum brake EBS Payload 34,160 kg Rolling tarpaulin Platform BPW axles Redpfxjwiw T Ts Ahzel Lifting and lowering system Errors excepted

Condition: used, Year of construction: 2023, operating hours: 2 h, Wacker Neuson WL25 wheel loader Edition Basic Operating weight 2,520 kg Tires 10-16.5 Engine Perkins Power 18.4 kW / 25 HP Compact axle T94 Lighting in accordance with StVZO Reverse warning device Drive speed 20 km/h Rodpfxeu A Nkpo Ahzel Foldable driver's protection roof eps 3rd control circuit at the front including single detent, operated via lever Adjustable steering column Cast rear weight Bolt self-recovery device Work lights 2 at the front, 2 at the rear Tank capacity 45 l Weidemann SWP hydraulic mount Accessories: - Pallet fork 1200 mm - Earth bucket 1400 mm RZ, 0.44 m³ - Data confirmation (ABE) - EC declaration of conformity

Condition: used, Year of construction: 2023, operating hours: 70 h, load capacity: 2,500 kg, lifting height: 5,000 mm, fuel type: electric, construction height: 2,366 mm, Equipment: head guard, * Load capacity: 2,500 kg * Load center: 500 mm * Lifting height: 5,000 mm * Free lift: 1,595 mm * Overall height: 2,366 mm * Drive: Electric * Forks LxWxH: 1,220 x 100 x 45 mm * Fork carrier width: 1,038 mm Redeqw T Rmspfx Ahzel * Battery power: 80 / 202 VAh * Drive motor power: 11 kW * Lifting motor power: 21 kW * Tines adjustable in width ---- Internal vehicle number: 8254 ---- Errors and prior sale reserved.