Log semitrailer

Schröder SCHROEDER ST1024P4-13,6, Rungen anlegbar

Condition: used, empty load weight: 5,600 kg, maximum load weight: 28,400 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 02/2006, next inspection (TÜV): 06/2024, loading space length: 12,050 mm, loading space width: 2,450 mm, loading space height: 1 mm, suspension: air, tire size: 215/75R17.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axles, BPW axles, air suspension, lifting + lowering, ABS (anti-lock braking system), lashing eyes, U-protection, supports, twin tires, stanchions Structure: 3-axle flatbed trailer with 8x 11t Ecco aluminum stanchions & 4x 9t Ecco aluminum stanchions 3x 8t BPW axles, drum brakes! Loading height approx. 900mm! The trailer has been given a new wooden floor and further work for approx. €8,000.00! Length of loading area below approx. 7600mm! Length of loading area above approx. 4450mm! Gjdet Eb Tgepfx Adtskd Width of loading area with stanchions approx. 2450! Width of loading area without stanchions approx. 2260mm! The stanchions can also be used as loading ramps! Stanchions available for an additional charge of €6,000.00 net! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: used, maximum load weight: 39,550 kg, overall weight: 54,000 kg, axle configuration: 3 axles, first registration: 03/2007, next inspection (TÜV): 08/2024, total width: 2,750 mm, Year of construction: 2007, Equipment: ABS, Manufacturer: Goldhofer Type: STZ-VL3-39/80 Year of construction: 2007 Unladen weight: 14.450kg Payload: 39,550kg Axles: 3x BPW (forced steering, air suspension) Tires: Continental HTR 2 (245/70 R 17.5) Length: 16,000mm Width: 2,750mm ? 3.250mm Gooseneck: Inside: 2,600mm x 2,500mm plus storage compartment Gkjdpfx Adeucmz Astsd Lashing points: 4 Drop deck: 7,500mm x 2,750mm Lashing points: 6 Plateau: 4,100mm x 2,750mm Lashing points: 4 Subject to errors and prior sale.

Condition: used, empty load weight: 5,600 kg, maximum load weight: 28,400 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 02/2006, next inspection (TÜV): 06/2024, loading space length: 12,050 mm, loading space width: 2,450 mm, loading space height: 1 mm, suspension: air, tire size: 215/75R17.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axles, BPW axles, air suspension, lifting + lowering, ABS (anti-lock braking system), lashing eyes, U-protection, supports, twin tires, stanchions Structure: 3-axle flatbed trailer with 8x 11t Ecco aluminum stanchions & 4x 9t Ecco aluminum stanchions 3x 8t BPW axles, drum brakes! Loading height approx. 900mm! The trailer has been given a new wooden floor and further work for approx. €8,000.00! Length of loading area below approx. 7600mm! Length of loading area above approx. 4450mm! Width of loading area with stanchions approx. 2450! Width of loading area without stanchions approx. 2260mm! The stanchions can also be used as loading ramps! Godpervhl Uefx Adtskd Stanchions available for an additional charge of €6,000.00 net! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: new, maximum load weight: 39,600 kg, overall weight: 55,000 kg, axle configuration: 2 axles, loading space length: 7,500 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 300 mm, Year of construction: 2025, Equipment: ABS, * DOLL tronic operating and control system incl. radio remote control * Hydraulically detachable gooseneck * Hydraulic steering * Lateral main frame * Comprehensive load-securing package * Low-bed length: 13,000 mm (7,500 + 5,500 mm) Gjdpfx Aerd T E Sedtskd * Optional comprehensive equipment Pictures may differ from the original. All information provided without guarantee.

Condition: new, machine/vehicle number: 1acf251a278ec5cde4067a7b1, empty load weight: 5,800 kg, maximum load weight: 22,200 kg, overall weight: 28,000 kg, axle configuration: 2 axles, tire size: 235/75 r17,5, Further information Chassis saddle forwarding Fine-grained steel welded construction, saddle plate with replaceable 2 king pins Outer frame slightly slanted new design with Load-Lock profile for tensioning strap attachment 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Free support foot corner dimension or free swing radius to the rear approx. 1920 mm 2 wheel chocks with holder Aluminum side impact guard Steel underride guard Quarter-shell mudguards in front of and behind each axle 1 spare wheel holder for 1 e-wheel, with wheel fastening set 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Axles + suspension Drum brake axles of the manufacturer's choice Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake systemColor-coded line routing for easy servicing. Spring-applied parking brake Duomatic connection at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Godpfxjkv Uvzo Adtjkd Vehicle stability system Wheels and tires 235/75 R17.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 1 x 15-pin socket at the front, without connecting cable Floor Screen printing plates approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5,600 kg Front wall / front corner stanchions 25 mm aluminum hollow profile, approx. 1 350 mm high, steel corner stanchions in volume design Approval country / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Front wall aluminum Attention! These are archive pictures!

Condition: used, empty load weight: 8,340 kg, maximum load weight: 32,660 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 11/2020, next inspection (TÜV): 03/2025, loading space length: 13,360 mm, loading space width: 2,500 mm, total length: 25,500 mm, total width: 28,500 mm, total height: 127,000 mm, suspension: air, tire size: 235 / 75 R 17,5, color: red, Year of construction: 2020, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, emission class: none, Equipment: ABS, ABS, axle manufacturer SAF, two-part aluminum ramps 20,000 kg spring-supported, air-lift suspension, lifting and lowering, lift axle 1. axle, steered trailing axle + hydraulic maneuvering aid with radio remote control, trailing steering, wheel recesses, stake pockets, toolbox, aluminium supports, widening plates, 2 x wheel recesses with aluminium wheel recess covers, excavator stick recess, rear drop supports, loading gauge, Nato socket for electric hydraulics, 2 x 3-chamber LED rear lights, container bridge, twist locks, 2 x LED work lights, levelling jack, fifth wheel height 980 mm Gkodpfx Adstxrqqstod

Condition: used, maximum load weight: 42,700 kg, overall weight: 58,600 kg, axle configuration: 3 axles, first registration: 07/2013, Equipment: ABS, Vehicle identification number: YAFTL313000014137 First registered: July 18, 2013 DE HU due Own weight: 15,900 kg Total length: 16,700 mm Gooseneck 3,700 mm Steering radius of kingpin to the rear approx. 2,700 mm Kingpin standard 3.5 inches - fifth wheel height: 1,320 - 1,350 mm Low bed length: 8,500 mm - Loading height: approx. 500 mm TELESCOPIC by 4,250 mm Chassis frame: 4,500 mm - Loading height: approx. 900 mm Suspension travel (with air suspension) approx.: -80/+160 mm Excavator trough - Dipper stick trough Hydraulic support feet Fifth wheel load technically up to 25,000 kg Gedortlxhjpfx Adtokd Axle loads 3 x 11,200 kg Axle spacing: 1,360 mm SAF axles with drum brakes 3 x hydraulically forced-steered axles with RADIO + cable remote control Tires: 235/75 R 17.5

Condition: used, maximum load weight: 34,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2026, loading space length: 7,650 mm, loading space width: 2,330 mm, loading space height: 1,470 mm, loading space volume: 25 m³, total width: 2,550 mm, total height: 3,100 mm, Year of construction: 2024, Equipment: ABS, 3-axle SCHWARZMÜLLER aluminium half-pipe tipping semi-trailer 25 cbm First registration 03/2024 Internal dimensions (LxWxH): 7,650 x 2,330 x 1,470 mm Unladen weight only 5 t Loading height 3,100 mm Fifth-wheel height 1,200 to 1,250 mm Aluminium body in semi-circular segment construction Continuous floor plate, 6 mm Sidewall thickness also 6 mm, plus additional aluminium wear plates, 6 mm, rear section approx. 3,500 mm long, circumferentially welded External aluminium tailgate, without spill chute Automatic-mechanical 2-hook central locking system HYVA high-pressure front ram, 250 bar Roll-up roof tarpaulin with central locking Godoxvgqropfx Adtjkd Chassis: steel frame Crank-type landing legs WABCO trailer EBS with rollover stability support (RSS) SAF axles with large 430 mm disc brakes, reinforced off-road version 1st axle is a lift axle Speed-restricted starting aid (Traction Help Plus) Automatic tipping lowering system 6-fold 385/65 R 22.5 tyres Aluminium air tanks Tyre pressure monitoring with wheel-mounted pressure sensors, display in the driver’s cab Full LED lighting 2 additional LED reversing lights RENTING is the new BUYING—available immediately through our full-service rental or leasing options.

Condition: new, machine/vehicle number: e7fbe178b85a202cade7e95af, empty load weight: 5 kg, maximum load weight: 22 kg, overall weight: 29 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis saddle forwarding Welded fine-grained steel construction, saddle plate with replaceable 2 king pins, with 2 king pin positions Slightly angled outer frame with load-lock profile for attaching lashing strapsNote! To attach the straps in conjunction with drop sides, the drop sides must be opened! 2 pairs of lashing eyes embedded in the outer frame on gooseneck, 5 tons each 8 pairs of lashing eyes embedded in the outer frame in the low bed, 5 tons each 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminum side bumper Steel underride guard Quarter-shell mudguards in front of and behind axle unit 2 Stainless steel stowage box, w=600/h=400/t=500 mm, with polished door, lockable 2 pairs of stake pockets recessed in the outer frame on gooseneck, 70 x 40 mm internal dimensions 6 pairs of stanchion pockets in the outer frame recessed in the deep bed, 70 x 40 mm Internal dimension!!! Internal width between the stanchions 2420 mm!!! 3 lashing/stanchion rails in the drop-down bed, embedded transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stanchions approx. 2170 mm), approx. 100 mm high. With 20 mm round steel slats, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). For lashing and inserting stanchions 80 x 80 mm. Piece of stanchions W=80/ D=50/ L=1200 mm, hot-dip galvanized Piece of stanchions W=80/ D=80/ L=1200 mm, hot-dip galvanized Note: Stanchion pockets / stanchions are not designed for securing long material, pipes etc. on their own without wrapping around them. Mechanical rear extension with hand crank, can be extended by approx. 1,500 mm, can be locked every 500 mm, with support beam, can be loaded with 2000 kg over the entire width at the load center of gravity at approx. 500 mm, can be loaded with 1000 kg over the entire width at 1000 mm and can be loaded with 500 kg over the entire width at 1500 mm, incl. extendable underride guard with lighting, 2 pairs of stanchions W=80/ D=80/ L=1200 mm, hot-dip galvanized Open storage compartment for stanchions, on the front wall or underneath the loading area (for 10 stanchions 80 x 50 x 1200 mm and 4 stanchions 80 x 80 x 1200 mm) Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption last axle self-steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button. Air suspension with lift & lower valve Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable clutch heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Gkjdpfxji Ri Hve Adtsd Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales). Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin sockets at the front, without connecting cable 2 additional LED work lights, at the rear, switched via reversing light 1

Condition: used, maximum load weight: 33,700 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2022, loading space length: 13,000 mm, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2022, Equipment: ABS, PAVIC 3-Axle Timber Bunk Trailer for Roundwood First registration 09/2022 Mileage only 187,056 km LOADING LENGTH 13,000 mm Unladen weight approx. 5,300 kg Gkjdpswx Sqlefx Adtod Chassis made of fine-grain steel, KTL coated and powder-coated in RAL 9005 Full cover between longitudinal beams made of sheet steel SAF landing gear, 24 t capacity SAF axles with large 430 mm disc brakes 1st axle is a LIFT AXLE WABCO – EBS WABCO Smartboard with axle load indicator Tyres: 6 x 385/65 R 22.5, tread depth 70% 4x LED work lights 2 plastic toolboxes Front wall reinforced steel version, height approx. 2,500 mm 8 OptiPa steel bunks with load securing hooks 16 OptiPa steel stakes, load capacity 9 t per pair of stakes Very good condition, immediately available-----