Tanker semitrailer

SCHMIDT CKSA 10/22-20 Containerkippchassis Tank

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 56 m³, Equipment: ABS, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-longitudinal beams with welded cross beams. Chassis width 1,600mm Axles and suspension disc brake 430 mm Jost (ex Mercedes DCA) axle units 3 x 9 t with air suspension, air bellows in central arrangement to the chassis longitudinal beam, 1st axle liftable with starting aid and manual forced lowering, Smart Board Infocenter, raising/lowering valve, BVA brake wear indicator Tires and wheels 6 wheels with tires of size 385/65 R22.5 from manufacturers of choice, with steel rims 11.75 x 22.5 ET 120 Seatposts mechanical version with one-sided operation in 2 speeds with swivel base for air suspension Brake system according to E.G. Standard, Wabco two-line system, spring-loaded parking brake acting on two axles and Wabco EBS-E including RSS (Roll Stability System) and Premium Modulator, Wabco SmartboardInfocenter, aluminum air tank system electrical system according to the guidelines of the STVZO with 2 five-chamber lights type Aspöck Ecopoint 2, 24 volt system with 2x7 and 1x 5-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, 1 LED headlight inside, Tipping body/trough body fully welded inside Fsdpfxsfi Nmus Afmspp Aluminum trough, side walls 30 mm thick plank profiles (2-3 mm) 600 mm wide welded, floor 8 mm thick highly wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced in straight design, rear wall as universal door in straight design with 2 wing doors in 2/3-1/3 version with a grain slide or ww. Version in 1/2-1/2 version possible with one grain slider each, aluminum round profile welded on to the side and bottom of the rear doors to seal the door gap, rear doors partially covered with smooth aluminum, operation of the universal door can be automatically pneumatically locked with a separate lever, aluminum rear bow can be swung out, two hold-down devices with rubber buffers attached to the tipping trough to the frame on the bulkhead Hydraulic system tipping ram with large cover Hydraulic ram mounted on the bulkhead with a max. working pressure of 150 bar, made by Edbro, with approx. 2.5m hydraulic hose and loose half 1", tilt angle approx. 48 degrees Accessories 6 Parlok fenders, complete mud flaps attached to the U-guard across the entire width of the vehicle, aluminum spare wheel holder, side collision protection on the right in a foldable version, tool box type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel bows 150 mm raised in the middle, additional centrally mounted bow holder for positioning a total of 2 bows to increase the loading width, roll-up tarpaulin with a central light strip and separate reinforcements in the wear areas in approx. 660 gr. /m2 quality with roll-up tarpaulin system, all-round rubber rope at the rear end of the tarpaulin with two tow hooks to be attached to the swivel bow at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin closure at the rear with welded-in rubber rope to prevent water ingress, robust foldable underrun protection with ww. two towing eyes on the left and right including locking bolts, 2 "Clear-Pass" mud flaps on the fender in accordance with EC standards, attached to the side of the frame, an aluminum grain hopper with tarpaulin bag, holder for shovel, broom and scraper mounted above the axles, etc... +590¤ transfer costs available in 50m³ - 56m³ 9,700mm and 10,500mm loading space length * the price varies depending on th

Condition: new, axle configuration: 3 axles, loading space length: 10,636 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Chassis manufactured in self-supporting ALUMINIUM construction with corresponding reinforcements in the lower flange for particularly high stability and strength, aggregate chassis made of ALUMINIUM, 140 mm frame height! (max. 39t) Axles and Suspension “Disc Brakes 22.5” Jost axle assemblies 3 x 9 tonnes with DC air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor equipment), 1st and 3rd axles separately liftable with start-up aid (without tractor equipment), 3rd axle also with Optiturn, ECAS air suspension, tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors Tyres and Wheels 6 wheels with tyres 385/65 R 22.5 as per manufacturer selection, Alcoa aluminium rims DuraBright - 11.75x22.5 ET 120, kingpin bolted into a 10 mm thick plate Landing Gear Aluminium drop-leg landing gears, 2 x 10 t support load, for air suspension we use swivel feet Brake System According to E.G. standard, two-line braking system, EBS E-system Wabco with RSS system (Roll Stability Support), spring-loaded brake system acting on two axles with control at rear, aluminium air tank system, premium modulator Electrical System According to STVZO regulations with 2 LED five-chamber tail lights type Aspöck Europoint LED integrated in aluminium rear closure, 24 volt system with 1x 5-pin and 2x 7-pin sockets, side marker lamps in LED, 2 separate LED work lights at rear, 2 LED work lights at first landing gear height, 1 LED work light inside front left, operable from outside Body/Tipper Body "Body fully welded on the inside" Fjdpfsfakkcsx Afmopp Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN. Aluminium body, side walls made of 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper flange, plank profiles fully welded on inside, floor as moving floor system laid on 140 mm ALU cross beams, floor load approx. 7 t/m², crossbeams closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in beveled version, flat rear wall in straight design with 2 ALU swing doors 50/30 mm, with 4 locking bars in welded ALU rear frame mounted in Teflon and stainless steel bearings, continuous reinforced ALU upper flange supporting ALU wall with "Kevlar tarpaulin for complete emptying, side brush seal, additional side Kevlar tarpaulin, integrated discharge chute with folding cover plate at rear left bottom, operable from outside, inspection window rear left, one sampling flap in each rear door (2 pcs.), service door front left Hydraulic System "Cargo Floor moving floor system in the floor with hydraulically operated ALU profiles mounted on ALU square profiles with approx. 670 PE-HD sliding plates, approx. 6 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed parts at front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with sizes and type to be specified, operating pressure 190 to max. 240 bar, ALU end pieces welded into floor, electric control rear left with cable control in a lockable waterproof box, Accessories PVC mudguards with rubber mud flaps, ALU spare wheel carrier, side ALU underrun protection in folding version, 1 tool box approx. 800x460x430 mm in plastic, approx. 3.7 m ALU ladder, rolling tarpaulin 680 g/m² quality with rolling tarpaulin system incl. sides.

Condition: used, maximum load weight: 28,700 kg, overall weight: 37,000 kg, axle configuration: 3 axles, first registration: 03/2003, Equipment: ABS, Vehicle identification number: WFB334B9G31025709 Own weight: 8,300 kg DE HU 12.2024 - SP due Main inspection: 04.2027 Intermediate inspection 04.2030 Volume: 38,000 l. 4 chambers - 7,500 l. / 11,500 l. / 11,500 l. / 7,500 l. BPW Eco Plus axles with disc brakes Axle loads: 3 x 9,000 kg 4 x dome covers Fsdpfx Afeu Hvn Asmepp 4 x outlet on right side Additional heating - Webasto in the box Stainless steel tool box Tires: 385/65 R 22.5 Aluminum wheels Subject to changes, prior sale and errors. The description serves to generally identify the vehicle and does not constitute a guarantee in the sense of sales law. The description according to the purchase contract is decisive. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply.

Condition: used, maximum load weight: 26,860 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 04/1997, next inspection (TÜV): 03/2026, loading space volume: 30 m³, Equipment: ABS, * 28669 - Vehicle ID for telephone inquiries * Manufacturer: KLAESER * Type: TSA-30C * ABS, SAF axles, drum brakes, air suspension (raise and lower), lift axle, aluminum rims * 30,000 liter tank, 1 chamber, insulated, pipes for boiler heating, temperature gauge * Tank material: 1.4404 (stainless steel) * Next recurring inspection: 02/2027 * Next leak and function test: 02/2030 * Dangerous goods / ADR (next inspection: * Tank cleaned * Tires 1st axle: 385/65R22.5 (5/7 mm) * Tires 2nd axle: 385/65R22.5 (13/10 mm) * Tires 3rd axle: 385/65R22.5 ( 10 / 12 mm) ----Our email address: Our service for you: - Obtaining temporary or customs license plates - Transfer / delivery throughout the EU - Customs clearance of vehicles to third countries If you have any questions about Russian, you can contact us by phone at any time* Fjdpfx Afev S R Nnjmepp WhatsApp just for Russian speakers:* WhatsApp for English, German, and other languages:

Condition: good (used), functionality: fully functional, empty load weight: 8,220 kg, maximum load weight: 24,780 kg, overall weight: 33,000 kg, axle configuration: 3 axles, first registration: 10/1986, Year of construction: 1986, Good condition 29,000 liters 1 chamber DST 29/V2A Fpjdpfxjwkdnme Afmep

Condition: used, machine/vehicle number: 1088, axle configuration: 3 axles, first registration: 01/2000, total length: 10,000 mm, total width: 2,500 mm, total height: 3,300 mm, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2000, Equipment: ABS, Tank Material tank: Inox Isolated: ✓ Compartment capacity (liters): 25000 Number of compartments: 1 Capacity (liter): 25000 Foodstuffs: ✓ Test pressure: 3.0 bar Maximum working pressure: 2.0 bar Fuel: ✓ Structure Dish height: 120 cm Chassis Chassis height: 100 cm Diameter coupling pin / coupling plate: 2 inch Food tank (inox) 25000 liters, Insulated stainless steel (inox), 1 Compartment, Internal cleaning system (sprinklers), Test pressure 3.0 bar, Max working pressure 2.0 bar, ABS, Air suspension, Ror axles,, Drum brakes, Shipment dimensions 1110x250x330 cm = More information = Axle configuration Tyre size: 385/65 R22.5 Make axles: Ror Brakes: drum brakes Suspension: air suspension Fodeu H H S Sjpfx Afmjpp Axle 1: Tyre profile left: 55%; Tyre profile right: 40% Axle 2: Tyre profile left: 25%; Tyre profile right: 60% Axle 3: Tyre profile left: 25%; Tyre profile right: 50% Weights Empty weight: 6.150 kg Carrying capacity: 31.350 kg GVW: 37.500 kg Functional Make of bodywork: Melton Identification Registration number: C061782 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: used, empty load weight: 5,900 kg, maximum load weight: 28,600 kg, overall weight: 34,500 kg, axle configuration: > 3 axles, first registration: 10/1988, suspension: air, tire size: 385/65 22,5, tire condition: 30 %, color: blue, Year of construction: 1988, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 69589 Hendricks, Goch, Rutemund Tank * Year of manufacture: 1988 * Air suspension * Lift axle * Rotary lobe pump * Suspension: Air * Gross vehicle weight: 34,500 kg * Unladen weight: 5,900 kg * Payload: 28,600 kg * Permissible total weight: 34,500 kg * Axle manufacturer: BPW * Tire condition 1st axle: 30% -- 30% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 30% -- 30% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Manufacturer: Stadler TSA 32LD * Vogelsang rotary lobe pump 136-210 * Rear discharge Fodpfswdq Tiex Afmopp * 2 chambers with anti-surge baffles * 3 manhole covers * Unladen weight: 5,900 kg Disclaimer: Subject to change, prior sale, and errors excepted. You can find more photos and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and simple financing solutions * Handling of all (export) documentation * Ordering of export plates/customs plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading and load securing * TÜV inspections, registration services * Transportation of commercial vehicles Please contact our trained staff; we will be happy to advise you.

Condition: used, maximum load weight: 27,570 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2020, next inspection (TÜV): 01/2025, loading space length: 13,500 mm, loading space width: 2,500 mm, loading space height: 2,708 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, KNAPEN K 200 moving floor +/- 92 cbm, "Cargo-Floor" floor with 21 boards 10 mm, service door front, stainless steel wear plate rear under moving floor, wear plates at the end of the floor boards and on the side wall 3000x2000, complete emptying (with running bulkhead), with cable winch, push-in and push-out function, KNAPEN radio remote control V2 (for floor, lift axle, working lights, hydraulic tailgate), loading pressure gauge, access and standing area at the front of the body, roller tarpaulin, bumper with towing eye, oil temperature safety device, 3x reinforced waste bows ALCOA Durabright, ABS front standing area on body, roller tarpaulin, bumper with towing eye, oil temperature safety device, oil cooler, 3x reinforced waste bows, ALCOA Durabright aluminum rims, ABS, EBS, SAF INTRA CD axle(s), disc brake system, 1. Axle - lift axle, rear steering axle, air suspension with lifting and lowering device, aluminum drop supports, LED work lights: on the seat posts, behind the last axle and in the body, 30-litre water tank, reversing camera, stainless steel storage box, vehicle can be fitted with advertising and/or lettering Fedpfxeu Ta I Rs Afmjpp Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Condition: used, machine/vehicle number: W093861542GG10301, axle configuration: 3 axles, first registration: 07/2002, total length: 12,650 mm, total width: 2,500 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2002, Equipment: ABS, Chassis Chassis height: 100 cm Height of coupling pin / drawbar: 120 cm Tank Material code: AIMg 4,5 Mn W28 Compartment capacity (liters): 58000 Number of compartments: 1 Capacity (liter): 58000 Powder: ✓ Fuel: ✓ Aluminium powder tank, Capacity 58000 litres, 1 Compartment, Hydraulic pump for standalone tipping, ABS, Air suspension, Disc brakes, SAF axles, Shipment dimensions 1265x250x400 cm. = More information = Axle configuration Tyre size: 385/65 R22.5 Make axles: Saf Brakes: disc brakes Fpedpou H Ah Asfx Afmep Suspension: air suspension Axle 1: Tyre profile left: 75%; Tyre profile right: 75% Axle 2: Tyre profile left: 80%; Tyre profile right: 45% Axle 3: Tyre profile left: 70%; Tyre profile right: 80% Weights Empty weight: 7.300 kg Carrying capacity: 30.700 kg GVW: 38.000 kg Identification Registration number: C109192 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.