Tipper truck

SCANIA P420 4X2 BB Retarder Dreiseitenkipper Kran

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the length of the loading area, length approx. 3,750 mm, with a bevel at the rear of approx. 850 mm x 10° -Can be raised and lowered hydraulically, stroke +- 250 mm including hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For tractor units: 6 x 4 and 8 x 4 Loading area: -Loading area in extendable design, length approx. 11,000 mm with a bevel at the rear of approx. 500 mm x 10°. -A recess in the loading area and in the bevel to accommodate the excavator bucket handle approx. 4,240 x 900 x 440 mm -Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically foldable ramp tips. -Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards -25 mm "Super Grip" rubber floor and approx. 5 mm sheet metal floor as additional reinforcement on the slope of the loading area -20x30 mm square climbing rails, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steered -The steering behavior of the first two axles can be optimally adjusted to the length of the loading area both mechanically and hydraulically. -Hose rupture valve on the axle compensation cylinder with automatic RESET function. -Hydraulic cylinder with shut-off valves and pins for securing in the raised position. -245/70 R 17.5 3PMSF Accessories included: -Steel bulkhead, pluggable, approx. 400 mm high -Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile -1 spare wheel -Outer support of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screwable lashing rings included -Checker plate covering above the gooseneck -On the gooseneck 1 pair of pluggable aluminum side walls on the side, approx. 400 mm high, anodized -On the gooseneck a pluggable aluminum rear wall, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide Ljdpfxsk Af Svo Ahzoak -4 Brake shoes -4 axle load gauges -Mechanical downpipe supports at the front -1 one-piece INOX tool box, approx. 2,480 x 340 x 390 mm -Mechanical downpipe supports at the front -Continuous sheet metal covering on the loading area with a painted layer of sand to prevent slipping -1 intermediate table, approx. 500 mm wide, for the pull-out, with long holes for hanging and movable bridging elements -Painted sand coating on the support surfaces of the intermediate table -Mechanical locking for locking the intermediate table to the pull-out -8 pairs of stake pockets in the outer frame -Extensions (galvanized) extendable by approx. 230 mm per side -1 pair of hydraulic. Rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electro-hydraulic unit -Widening planks, loose, in reinforced steel U-frame -Radio and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length Lasdpfsrgzv Njx Ahzok * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: used, mileage: 84,860 km, power: 375 kW (509.86 HP), first registration: 02/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2026, brakes: retarder, color: green, gearing type: mechanical, Year of construction: 2024, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), navigation system, parking heater, soot filter, Tractor Unit 4X4 Hydrodrive MAN TGX 18.510 BL SA in Full Specification First registration 02/2024 Mileage 84,860 km GM cab with 1 bunk, cab air suspension, swinging entry steps, 3-piece steel bumper, Light & Vision Plus safety package, driver comfort package, Plus interior lighting package, storage package, comfort driver’s seat with Alcantara/leather upholstery, heated and ventilated driver’s seat, rotatable Vario passenger seat, full LED lighting, LED headlights, LED fog lights, high beam assistant, automatic headlight control, 12.3-inch instrument cluster, MAN truck navigation, Climatronic air conditioning, auxiliary water heater, fridge under the bunk, 220-volt socket, ZF 16-speed manual transmission RETARDER and additionally reinforced engine brake EVBec Leaf/air suspension Ljdpswwv Urefx Ahzoak Wheelbase 3,600 mm, short and highly maneuverable Aluminum fuel tank 490 liters 2-line MEILLER tipping hydraulics, large aluminum hydraulic oil tank approx. 200 l, switchable high-/low-pressure system, Tyres Front axle 385/65 R 22.5 Rear axle 315/80 R 22.5 ALCOA Dura-Bright high-gloss aluminum rims Full safety package including active steering MAN Comfort-Steering, Lane Change Support LCS and Turn Assist, side camera system SCS and 360° view assist, ACC adaptive cruise control, EBS, ABS Off-Road with additional off-road logic, emergency brake assist, emergency brake assistant EBA, Lane Departure Warning LDW, RENTING is the new BUYING—available immediately from us with full service rental.

Condition: used, mileage: 11,819 km, power: 375 kW (509.86 HP), first registration: 03/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Sun visor, air-suspended driver's seat, LED beacon lights on the cab, MAN radio with navigation system, lane departure warning system, air horns, turn assist system, reversing camera, fuel tank on the left, Retarder 35 Multilift Ultima 18s hooklift: containers 5–6.5 m, hook height 1570 mm pneumatic, hydraulic internal locking, rear tipping frame locking with half-moon, radio remote control, additional container supports at the front with internal guide, friction control, turbo function for fast unloading of empty containers. Crane: Asymmetrical multi-shell grab with 5 shells, outreach 9.26 m at 1620 kg lifting capacity, slewing angle 412°. Lodpfx Ahsq Hzvtozoak

Condition: used, mileage: 142,631 km, power: 353 kW (479.95 HP), first registration: 10/2005, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro3, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ BUY ++ Internal number: #276 MAN TGA 32.480 8x2-6 BL Wiedemann enviro tec Super 2000, water reclaimer Lajdpfx Ahovh H Huezsk superstructure * Wiedemann enviro tec * Super 2000 * Water recycling * 15,500 liter tank size * 5,500 liters of rinsing water * 10,000 liters sludge volume * Emptying by tilting the tank 45° Vacuum system * Wiedemann & Reichhardt KW 4000 (water ring pump) * approx. 4,000 cbm/h * approx. 20m suction hose DN150 High pressure system * 2x URACA KD716 approx. 313 l/min at 160 bar * approx. 140m HP hose DN38 * Hydraulic flushing hose reel with approx. 40m DN16 Fresh water pump * Speck NP25 50/120 approx. 50l/min at 120 bar * Hydraulic flushing hose reel with approx. 40m DN13 Special features * Stainless steel sludge tank * Two high-pressure pumps (URACA KD716) * Suction and HP boom * Motor - start switchable from control cabinet * NMV - start can be switched from the control cabinet * Equipment cabinet with two flaps - on both sides * Hose storage * Sound insulation of the pump room raised * Central lubrication system Technical data * GGW 32,000 KG * Length 11,800 mm * Height 3,850 mm * Width 2,550 mm Chassis: Special equipment: Axle load front axle 9.0 t, battery 225 Ah, battery box, electric battery disconnect switch, operating hours counter, electrically adjustable and heatable curb mirror right, Comfortshift gearshift, flame-start system, heated fuel filter, fuel tank: 600 l aluminum, Eberspächer D4S auxiliary air heater, seat cover / upholstery: comfort quality, control module for external data exchange, reinforced front axle shock absorbers, front underride guard, offset front axle VOK-09 Further equipment: Axle configuration: 8x2, Trailer socket 24V / 7-pin, Trailer socket ABS, Anti-slip control (ASR), Electrically adjustable and heatable exterior mirrors, Exterior mirrors wide-angle and electr. adjustable and heatable, right, differential lock rear axle, EDC engine regulation, electronic brake system MAN-Brakematic, EURO 3 engine, cab: L, driver's seat comfort, tachograph, suspension: leaf / air, electric windows, generator 100 A, speed limiter 80 / 85 km/h, rear axle HY-1350, cabin filter: pollen filter, body/structure: Chassis, Rocker arm - brake EVB, Steering column (steering wheel) adjustable, Air compressor 1-cyl., Engine 12.8 ltr. - 353 kW diesel (D 2876 LF 12), Trailing axle NO-08, liftable, Radio preparation 24V, Disc brake rear axle, Disc brake front axle, Side guard, Side window, Front axle stabilizer, Plastic bumper, Rear underride guard, Electronic immobilizer, Central locking, Gross vehicle weight 32.00 t For more detailed information and/or pictures, please contact us directly. You can find a large selection of other vehicles to BUY or RENT under: Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty.

Condition: used, maximum load weight: 120,000 kg, axle configuration: > 3 axles, first registration: 10/1993, Year of construction: 1993, Equipment: ABS, Manufacturer: GOLDHOFER Type: THP-SL Year of manufacture: 1993 / 2010 consisting of: Laedjt Irxxepfx Ahzjk - gooseneck with hydraulic unit (year of manufacture: 1993 - hydraulics: 2003) - 2-axle chassis module (year of manufacture: 2010) - 3-axle chassis module (year of manufacture: 1993) - 4-axle chassis module (year of manufacture: 1993) - excavator bed 5.8m rigid (year of manufacture: 2010 - payload 100 tons) - excavator bed 8m + 5m extendable (year of manufacture: 1993 - payload 120 tons) Available immediately. Subject to errors and prior sale.

Condition: used, overall weight: 92,000 kg, axle configuration: > 3 axles, first registration: 08/2006, loading space length: 19,000 mm, loading space width: 3,000 mm, loading space height: 815 mm, total width: 3,000 mm, Equipment: ABS, Goldhofer STZ-H6-57/80A telescopic low loader for wagon transport----                                     Approval          Technical 1 Speed:     80km/h                 65km/h Fifth wheel load:               23,000kg               26,000kg Rear axle load:       10,000kg             11,000kg Total weight:     83,000kg               92,000kg Payload:                52,500kg               61,500kg Own weight: (without accessories):           30,500kg ----Gooseneck: Length: 4,000mm Width: 2,480mm Height: 235mm Seat height: 1,350mm DLR front: 1,420mm DLR rear: 2,700mm King pin 3.5 inches Ledpfx Aslhn Afehzoak Bevel: bevelled 10 degrees Corners front: bevelled 45 degrees Floor covering: spruce 50mm Seat supports: mechanical Width with side walls: 2,550mm Hydraulic STZ gooseneck with external supports, hydraulically liftable and lowerable with mechanical downpipe supports and hydraulic support cylinders hydromechanical forced steering (2-circuit steering) in flat design (height 235mm) with adjustable guide elements and THP steering cylinders. ----Loading area: Type: Platform Liftable: no Length: 13,000mm Width: 3,000mm Floor covering: sheet metal/spruce 50mm Wheel recesses: no Wider extensions: no Extendable: simply telescopic Length1: 10,000mm Loading heights (loaded) Loading height 1: 815mm Loading area telescopic, designed as an outer and inner tube construction, with 1,070mm long, fixed loading area section at the front. Bolt-link coupling integrated in the fixed loading area section for coupling boiler bridge extension supports, the square rails welded on by us serve as rail tracks in the track widths 1,000 mm (rail spacing 1,015 mm) and 1,435 mm (rail spacing 1,450 mm). Locking of the extension steps by spring-loaded cylinders and conical bushings Loading area height on the frame center tube (outer tube) approx. 815mm (+/- 130mm) Loading area height on the enclosed rail elements approx. 790mm (+/- 130mm) ----Rear chassis: Chassis type: Standard Loading height: 815mm Width: 3,000mm Wheelbase: 1,360mm Floor covering: Sheet metal Extensions: no Wheel recesses: no Excavator recess: no ----Axles: Number of axles: 6 Lift axle: see accessories Axle type: cranked steering knuckle Axle compensation: hydraulic Axle make: BPW/Eco Driving positions: 1 Axle stroke (1) +/-: 130/130mm Axle stroke (2) +/-: 0/0mm Raising/lowering valve: Yes 1st axle can be suspended pneumatically with lifting bellows ----Steering: Number of steering axles: 6 Steering axle arrangement: all steered Steering angle max: 45° Steering type: Hydr. 2 circles----Tires: Dimension: 235/75 r 17.5 143/141 J Tires. Type: twin Rim type: discs Rim centered: centered ----Brake code: according to EU standard: Yes AGS: Yes ALB: Yes ABS: Yes with ABS del: No Parking brake: spring-loaded EBS: No ECAS: No Remark: Brake calculation no.: GH 4324S ----Chassis remark: Steering designed for the extended state with a larger steering angle of the front axles Open wheel cutouts above the wheels with narrow cross arms in between (ALU covers see accessories below) Control elements protected on the left in the direction of travel Rims 17.5x 6.75 Cranked axles!!! ----Rear of vehicle: Design: Standard 90° Ramp fastening: see accessories Floor covering: Sheet metal Overhang from last axle: 1,300mm Support: see accessories ----Load securing: Lashing rings Number: 5 Loadable up to: 10 tons per piece Arrangement: 2 pairs on the SH                         3 pairs on the LF----Rear extension: Max. load capacity 15,000kg with a

Condition: used, mileage: 7,118 km, power: 375 kW (509.86 HP), first registration: 08/2024, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 08/2026, gearing type: semi-automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Multifunction steering wheel, front windshield sun visor, sun blind for door side windows, cool box, MAN sound system, side camera system (SCS) ## SEE DOCUMENTS ## Müller 12105800 Laodpfx Ahsv Hkqhszok

Condition: new, functionality: fully functional, mileage: 450 km, power: 353.04 kW (480.00 HP), fuel type: diesel, tire condition: 100 %, axle configuration: 6x4, fuel tank capacity: 390 l, brakes: intarder, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Year of construction: 2025, Equipment: ABS, additional headlights, air conditioning, cabin, crane, cruise control, differential lock, gripper hydraulics, hydraulics, low noise, onboard computer, retarder, soot filter, standard shovel, tilting carriage, trailer coupling, MAN TGS 33.480 6X4 BB CH PALFINGER PK22002EH-D Front Crane MEILLER Three-Way Tipper • Automatic transmission • ZF intarder • 480 hp • NN cab Lajdpfx Aoxmh E Eshzsk • Drive: 6X4 • Differential locks on driven rear axles • Emission standard: EURO 6e • Air-suspended cab suspension • Medium-height design • Aluminum diesel tank • Access steps on driver’s side • Sun visor • 2 x air horns on cab roof • 2 x LED beacons on cab roof • 2 x LED work lights at rear of cab roof • 2 x LED strobe lights in front grille • 2 x LED strobe lights at rear of vehicle • 2 x LED work lights at rear of vehicle • Comfort driver's seat • Multifunction steering wheel • Cruise control • Navigation system • MAN EasyControl panel, 4 functions when door is open • Automatic climate control • Refrigerator • Trailer coupling with trailer equipment • Toolboxes • MAN EasyStart hill-hold assist • Short wheelbase • Wide front tyres PALFINGER PK-22002EH-D Front Crane • 5 hydraulic extensions • Radio remote control • Raised operator stand with console • 180° hydraulically tilting stabilizers • Lifting hook • Support plates with brackets Optional: • Clamshell bucket • Rotator • Rotator hook MEILLER Three-Way Tipper • Internal dimensions: 4,800 x 2,450 x 800 mm • Container width • Double-skinned steel drop sides • All drop sides foldable and pendulum mounted • Pneumatic pendulum locks on left and rear • Extendable ladder holder integrated in front wall • Extendable square tubes at rear for storing rear panel • Removable corner posts • 5 pairs of recessed lashing rings in body floor • 4 lashing rings in front wall • Net hooks on drop sides • Coupling jaw in front wall • Aluminum ladder with holder • Folding underrun protection Financing - Leasing / Hire purchase / Rental - available!

Condition: used, mileage: 441,000 km, power: 228 kW (309.99 HP), first registration: 07/2005, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: mechanical, loading space length: 5,100 mm, loading space width: 2,300 mm, loading space height: 650 mm, Year of construction: 2005, Equipment: ABS, air conditioning, crane, DAF CF 75.310 Tipper 5,10 m + CRANE Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2005 ? MILAGE: 441 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL MIRRORS ? POWER STEERING ? TACHOGRAP TIPPER: 510 x 230 x 65 cm (L x W x H) CAPACITY: 8 000 kg Laedpeh Tl H Aofx Ahzek TOTAL WEIGHT: 19 000 kg WHEELBASE: 470 cm TIRE SIZE: 315/80R22,5 SUSPENSION: SPRING CRANE: PM 12.5 S TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????