Used Krone Bdf Trailers for sale (1,472)

Condition: new, color: white, empty load weight: 16,000 kg, loading space volume: 56.3 m³, loading space width: 2,470 mm, loading space length: 7,670 mm, loading space height: 2,970 mm, Swap body, smooth steel BDF system, 7,820 mm long, FACTORY NEW! Brand-new smooth-walled steel swap body, BDF system 7,820 mm long, corner height: 3,125 mm.\n\nRear portal doors with double interior espagnolette locks.\n\nBody in RAL 9010 pure white. Telescopic ZINC-plated support legs for storage height 920 - 1,120 mm.\n\nInterior fittings as follows:\nRoof made of trapezoidal profiled sheet steel.\n21 mm thick, waterproof glued screen printing plate floor, strength according to EN 283\nfor floor loads up to 5,460 kg forklift axle load.\n\nForklift collision protection on 3 sides, approx. 360 mm high.\nSide walls above scuff rails with recesses for bulk material drainage\nSide walls inside with wooden paneling and \nSide walls inside with keyhole plates over the entire surface \n\nIncluding load securing certificate according to EN 12642 Code XL\n\nAll values given are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther objects can be found at . . Cgelimjtybtwj I Arot

Condition: used, color: green, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, LACK NEW! Used and refurbished smooth-walled steel swap body, BDF system, 7,450 mm long.\nIncluding SIDE DOOR (1.15 x 2.0 m)\n\nBody repainted here in RAL 6011 Reseda green. Other RAL colors available on request.\n\nAluminum roller shutter at the rear.\nIncl. brand new support legs in RAL 9005 deep black. Parking height: 1,320 mm.\n\nInterior fittings:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff base \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice \n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We are happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrubbing base, rolled inside\nIncl. brand-new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nincl. galvanized new 4-step extension ladder\nincl. new rope anchor plates and steel ropes on the roller shutter door\nincl. new side and bottom seals on the roller shutter door\n\nincl. UVV functional test certificate\n\nAll values given are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nFor further objects, please see pstä. . Cjlim Ijt E T Nme Arogt

Condition: used, Year of construction: 2009, color: blue, overall weight: 16,000 kg, empty load weight: 2,980 kg, loading space volume: 46.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system 7,450 mm long, LACK NEW, Premium plus! used steel swap body, BDF system 7,450 mm long. \nSmooth side walls, portal doors at the rear with external espagnolette locks.\nInside keyhole system\n\nFinished in PREMIUM PLUS version: \n\n- Premium 2 K paint finish - high-gloss, here in RAL 5005 signal blue or RAL color as requested\n- Underbody blasted, primed and repainted in body color\n- New roller shutter cables\n- New rubber seals\n- New support legs - fixed or telescopic\n- Superstructure overhauled with new UVV\n- Roof painted all around 40 cm - rest with fogging\n- Scuff plate rolled in grey\n- New galvanized access ladder\n- New galvanized gill plates fitted after painting\n- Contour markings on the sides at the bottom, full length \n- Contour markings at the rear in the corners\n\nAll values given are approximate dimensions in mm and kg.\nDelivery time on request.\nDelivery possible.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore properties can be found at . . Cslim I Aeuwtbnsrogt

Condition: used, color: red, overall weight: 16,000 kg, empty load weight: 2,950 kg, loading space volume: 48.8 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,695 mm, Swap-body platform, drop-sides with tarpaulin Swap-body platform with drop-sides and tarpaulin, BDF system, 7,450 mm long. baked Swap-body platform with drop-sides and tarpaulin, BDF system, 7,450 mm long.\n\nExternal dimensions: L = 7,450 mm, W = 2,550 mm, H = 2,950 mm. Parking height: 1,120 mm\nTotal weight: 16,000 kg. Unladen weight: 2,950 kg.\n\nSwap-body platform as storage container. \nPartial rust on parts of the swap-body platform. Usual signs of use, deformations, stops and damage. Body in RAL 3003 ruby red with neutralized lettering.\n\nImmediately available. Multiple available. Delivery possible.\n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found at . . Cgolijpgty Eom I Arjt

Condition: used, color: light blue, overall weight: 16,000 kg, empty load weight: 3,250 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, PAINT NEW Used and refurbished smooth steel swap body, BDF system, 7,450 mm long.\nBody NEW PAINTED here in RAL 5015 sky blue. \nHigh portal doors at the rear with external espagnolette locks.\nIncl. brand new rigid support legs in RAL 9005 jet black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInternal height: 2,550 mm. Rear load-through height: 2,480 mm.\nTotal weight: 16,000 kg. Empty weight: 3,250 kg.\n\nInterior equipment:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff base \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice\n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We are happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrubbing base, rolled inside\nIncl. brand-new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nIncl. galvanized new 4-step pull-out ladder\nincl. new foam rubber seals on the portal doors\nincl. 7 steel plates on the sides and front wall as well as new sealing seam all around, \nto prevent corrosion \nincl. UVV functional test certificate\n\nAll values given are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä.\n . Cslim Ispguzpe Aregt

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, NEW PAINT! Used and refurbished smooth-wall steel swap body, BDF system, 7,450 mm long.\nConstruction here newly painted in RAL 9010 pure white or RAL color upon customer request\nAluminum roller shutter at the rear.\nIncl. brand new rigid support legs in RAL 9005 jet black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInner height: 2,550 mm. Loading height at the rear: 2,380 mm.\nTotal weight: 16,000 kg. Empty weight: 2,860 kg.\n\nInterior fittings:\nKeyhole sheet metal embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scrubbing base\n(varies depending on the model, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint in one of 212 RAL colors of your choice\n(Please use our overview of all available RAL colors on our homepage)\nRoof approx. 40 cm painted all around (ATTENTION: No complete roof painting! We can gladly offer you roof painting for an additional charge.)\nBlasting work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrubbing base, rolled on the inside\nIncl. brand new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new fall protection devices\nincl. galvanized new 4-step extension ladder\nincl. new rope anchor plates and steel cables on the roller door\nincl. new side and floor seals on the roller door\nincl. 7 steel sheets on the sides and on the front wall as well as new sealing seam all around,\nto prevent corrosion\nincl. UVV functional test certificate\n\nAll values given are approximate dimensions in mm and kg.\n\nDelivery date on request.\n\nThe offer is subject to change and subject to prior sale.\nPrices net from location D-59558 Lippstadt-Rixbeck.\nYou can find more objects at pstä.\n . Cgolot Sxkvoim I Aret

Condition: used, color: grey, overall weight: 16,000 kg, empty load weight: 3,160 kg, loading space volume: 45.3 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,500 mm, Swap body, steel smooth BDF system 7.45m, paint NEW standard version with 2K paint, gray or desired color used steel smooth-wall swap body, BDF system 7.45m, rear with aluminum roller shutter, refurbished \nBody NEW PAINTED in standard version - here in grey, - standard RAL colors available on request,\nUnderbody blasted and provided with underbody protection, \nNew telescopic or fixed support legs, \nBody with new sealing seam - also painted in body color,\nNew rubber seals on roller shutter\nNew current UVV\nSlight scarring from blasting may still be visible in standard version\nFor premium paint finishes, please contact us!\n\nInternal keyhole system in the side walls or lashing rails.\n\nAdditional price for wooden or plastic base plates with bracket\n\nWhile stocks last or delivery time on request if not directly available. \n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nYou can find more properties at .\n\n\n . Celjqdai Hoim I Arogt

Condition: used, color: red, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, NEW PAINT! Used and refurbished smooth-walled steel swap body, BDF system, 7,450 mm long.\nBody repainted in RAL 3020 traffic red. Aluminum roller shutter at the rear.\nIncl. brand new rigid support legs in RAL 9005 deep black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInternal height: 2,550 mm. Rear load-through height: 2,380 mm.\nTotal weight: 16,000 kg. Empty weight: 2,860 kg.\n\nInterior equipment:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff plate \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice \n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We would be happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrubbing base, rolled inside\nIncl. brand new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nIncl. galvanized new 4-step extension ladder\nIncl. new cable anchor plates and steel cables on the roller shutter door\nIncl. new side and bottom seals on the roller shutter door\nIncl. 7 steel plates on the sides and front wall as well as new circumferential sealing seam\nIn order to prevent corrosion\nIncl. UVV functional test certificate\n\nAll stated values are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is non-binding, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nFor further objects, please see pstä. . Cgslimepgr S Us I Aret

Condition: used, color: white, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, steel beaded Steel swap body 7.45m BDF with portal doors - new paint finish, blasted and NEWLY PAINTED in high-gloss RAL 9010 white\nFactory-new support legs, fixed or telescopic in RAL 9005 black\nRear double-wing door with external espagnolette locks\nInside keyhole plates in the corrugations\nNew UVV with certificate\nDelivery time on request - while stocks last\n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther objects can be found under . Forklift pockets ( not available for all - according to RS ). Colim I Aepgzh Hsrogt

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, NEW PAINT! Used and refurbished smooth-walled steel swap body, BDF system, 7,450 mm long.\nBody repainted in RAL 9010 pure white. Aluminum roller shutter at the rear.\nIncl. brand new rigid support legs in RAL 9005 deep black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInternal height: 2,550 mm. Rear load-through height: 2,380 mm.\nTotal weight: 16,000 kg. Empty weight: 2,860 kg.\n\nInterior equipment:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff plate \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice\n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We would be happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrub base, rolled on the inside\nIncl. brand new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nIncl. galvanized new 4-step extension ladder\nIncl. new cable anchor plates and steel cables on the roller shutter door\nIncl. new side and bottom seals on the roller shutter door\nIncl. 7 steel plates on the sides and front wall as well as new circumferential sealing seam\nIn order to prevent corrosion\nIncl. UVV functional test certificate\n\nAll stated values are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä.\n . Cgelim Ijpg Eczs Arot

Condition: used, Year of construction: 2008, color: white, overall weight: 16,000 kg, empty load weight: 3,100 kg, loading space volume: 18.8 m³, loading space width: 2,480 mm, loading space length: 2,750 mm, loading space height: 2,750 mm, Swap body, smooth steel BDF system 7,450 mm, smooth-walled steel body, \n\nwith new UVV\n\nInternal keyhole plates and scuff plate all round.\n\n\nAll values stated are approximate dimensions in mm and kg.\n\nDelivery time on request. Delivery possible.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nYou can find more properties at .\n . Cgjleuuk Ixeim I Arot

Condition: new, color: white, overall weight: 16,000 kg, empty load weight: 2,950 kg, loading space volume: 48.2 m³, loading space width: 2,470 mm, loading space length: 7,290 mm, loading space height: 2,675 mm, Swap body, smooth steel Smooth steel wall Swap body, BDF system, 7,450 mm long Brand new steel swap body, BDF system 7,450 mm long, rear portal doors with double internal espagnolette locks.\n\nExternal dimensions: L= 7,450 mm, W= 2,550 mm H=2,900 mm. Storage height: 1,120 mm.\nTotal weight: 16,000 kg.\n\nBody in color RAL 9010 pure white. Telescopic support legs in RAL 9005 jet black for storage height 980 - 1,120 mm.\n\nInterior equipment as follows:\nSheet steel roof with anti-condensation coating, without light window.\n27 mm thick, waterproof glued screen printing plate floor, strength according to EN 283\nFor floor loads up to 5,460 kg forklift axle load.\nFloor plates with smooth side facing upwards. Ideal for furniture transport.\n(Sliding friction value of at least 0.3 is not achieved, \ntherefore the use of e.g. anti-slip mats is necessary for Code XL)\nForklift collision protection on 3 sides, approx. 360 mm high.\nInside with wooden paneling and \nwith 4 rows of horizontal rod lashing rails.\n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther objects can be found at . . Colim Iotrgywo Arsgt

Condition: used, color: red, overall weight: 16,000 kg, empty load weight: 2,950 kg, loading space volume: 48.7 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,690 mm, Swap-body platform, drop-sides with tarpaulin Swap-body platform with drop-sides and tarpaulin, BDF system, 7,450 mm long. baked Swap-body platform with drop-sides and tarpaulin, BDF system, 7,450 mm long.\n\nExternal dimensions: L = 7,450 mm, W = 2,550 mm, H = 2,950 mm. Parking height: 1,120 mm\nTotal weight: 16,000 kg. Unladen weight: 2,950 kg.\n\nSwap-body platform as storage container. \nPartial rust on parts of the swap-body platform. Usual signs of use, deformations, stops and damage. Body in RAL 3003 ruby red with neutralized lettering.\n\nImmediately available. Multiple available. Delivery possible.\n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found at . . Cgolopgynxeim I Arjt

Condition: new, color: blue, loading space width: 248 mm, loading space height: 2,500 mm, Swap body, sliding tarpaulin BDF swap body 7.45m - THW version Brand new sliding tarpaulin body 7.45m BDF in THW version, \nBody and tarpaulin in RAL 5002 blue, support legs in RAL 9005 black, telescopic, \n\nAluminum insertion slats, aluminum combination anchor rail, load securing beams\nDouble lashing rail centrally embedded in the floor, \nLight switch under the body, \nSupport plates in steel with handle incl. magazine compartment can be inserted on the side of the body, \nSliding cover\n\nAll values stated are approximate values in mm and kg. magazine compartment can be inserted at the side of the body, \nsliding cover\n\nAll values stated are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found under . Celsp Nz Dpeim I Arogt

Condition: new, color: silver, overall weight: 16,000 kg, empty load weight: 2,430 kg, loading space volume: 48.7 m³, loading space width: 2,480 mm, loading space length: 7,280 mm, loading space height: 2,700 mm, Swap-body platform, sliding tarpaulin BDF system 7,450 mm long, FACTORY NEW Brand new swap-body platform with Edscha sliding tarpaulin, BDF system, 7,450 mm long.\nHigh portal doors at the rear with internal espagnolette locks.\nSPECIAL HEIGHT: 2,900 mm!\n\nBody in RAL 7035 light grey, sliding tarpaulins in RAL 9006 white aluminum.\nSupport legs in RAL 9005 jet black. \nParking height: 980 to 1,320 mm.\nRear portal loading height: 2,525 mm\n\nEquipment:\n27 mm thick, waterproof screen printing plate floor. \nForklift accessible, axle load up to max. 5,460 kg.\nMultilock outer frame\n4 sets of LM insertable slats\nSliding roof (can only be moved from rear to front) \nIncl. load securing certificate body / tarpaulin EN 12642 Code XL.\n\nDelivery date on request. Delivery possible.\n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found at . . Colimstib Nms I Arogt

Condition: new, color: white, overall weight: 16,000 kg, empty load weight: 2,950 kg, loading space volume: 45.5 m³, loading space width: 2,470 mm, loading space length: 7,290 mm, loading space height: 2,525 mm, Swap body, smooth steel Smooth steel wall Swap body, BDF system, 7,450 mm long Brand new smooth steel wall Swap body, BDF system 7,450 mm long, rear portal doors with double internal espagnolette locks.\n\nExternal dimensions: L= 7,450 mm, W= 2,550 mm H=2,750 mm. Parking height: 1,320 mm.\nTotal weight: 16,000 kg, unladen weight: 2,950 kg.\n\nBody in RAL 9010 pure white. Telescopic support legs in RAL 9005 jet black for storage height 980 - 1,320 mm.\n\nInterior equipment as follows:\nRoof with anti-condensation coating without light window in the roof.\n27 mm thick, waterproof glued screen printing board floor, strength according to EN 283\nfor floor loads up to 5,460 kg forklift axle load.\nFloor panels with smooth side facing upwards. Ideal for furniture transport.\n(Sliding friction value of at least 0.3 is not achieved, \ntherefore the use of e.g. anti-slip mats is necessary for Code XL)\nForklift collision protection on 3 sides, approx. 360 mm high.\nInside front wall with wooden paneling and \nwith 3 rows of lashing rails horizontally on the front wall.\nInside side walls with keyhole plates over the entire surface and \nwith 3 rows of rod lashing rails horizontally embedded in the side walls.\nAttachment in heights: 800 mm / 1,600 mm / 2,200 mm.\n\nIncludes 2 locking bars for keyhole plates and combination/slot-hole lashing rails.\nIncludes load securing certificate in accordance with EN 12642 Code XL\n\nAll values stated are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found at . . Cgjlim I Aetzdt Usrjt

Condition: new, overall weight: 18,000 kg, empty load weight: 2,680 kg, axle configuration: 2 axles, suspension: air, tire size: 9-fach 235/75 R 17,5, wheelbase: 5,170 mm, color: black, Equipment: ABS, 2-axle swap body trailer, new vehicle. Version: UPS version. AZW 18\nABS/EBS drum brake, axles (BPW, manufacturer's choice) \nDimensions: L=8,945 to 9,345 mm, W= 2,480 mm. Unladen weight: 2,780 kg.\nTop lift: 1,140 mm, bottom lift: 880 mm, ride height: 980 mm.\n\nWheels with internal sensors and tire pressure monitoring system in accordance with UN ECE R 141 (TPMS)\n\nTires: 9-ply 235/75 R17.5 (FULDA, manufacturer's choice) with galvanized spare wheel basket. \n \nSuitable for the transport of standardized swap bodies according to EN 284, size C715 and C745.\nSuitable for the transport of standardized containers according to ISO 668/1496, size 20'. It cannot be loaded flush with the rear due to the arrangement of the underride guard in accordance with the EC standard.\n\nTensioning fork 150 mm offset.\nTensioning fork extendable from 2,000 to 2,400 mm (8 x 50 mm).\nFactory set to 2,200 mm. ø 40 mm towing eye.\n\nWarning sign ECE-R70 (red/yellow), splash guard in accordance with the EC directive,\nRump guard with rubber buffers. 1 parking warning sign, hinged.\n\nLighting and illuminated signaling device according to UN ECE . 48\nIncl. 2 LED license plate lights, LED side marker lights, \nLED clearance lights in the rubber arm.\n \nElectrics: 15- or 2x7-pole according to customer requirements incl.\nAir: Duomatic or yellow/red according to customer requirements incl.\nAccessories available at an extra charge.\n\nAll values stated are approximate dimensions in mm and kg. \n \nDelivery date on request. Leasing possible.\n \nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nYou can find more properties under \n. Cgolim Ijtrgyto Arjt

Condition: new, overall weight: 18,000 kg, empty load weight: 2,840 kg, axle configuration: 2 axles, suspension: air, tire size: 4-fach 445/45 R 19,5, wheelbase: 5,170 mm, color: black, Equipment: ABS, 2-axle swap body trailer, new vehicle. Version: Maxi. AZW 18\nABS/EBS disc brake, axles (BPW, manufacturer's choice) \nDimensions: L=8925 to 9,525 mm, W= 2,480 mm. Unladen weight: 2,840 kg.\nTop lift: 1,400 mm, bottom lift: 900 mm, ride height: 1,080 mm.\n\nTires: 4-ply 445/45 R19.5 with galvanized spare wheel basket. \nSpare wheel available at an extra charge. \n\nWheels with internal sensors and tire pressure monitoring system according to UN ECE R 141 (TPMS)\n \nSuitable for the transport of standardized swap bodies according to EN 284, size C715 and C745.\nSuitable for the transport of standardized containers according to ISO 668/1496, size 20'. It cannot be loaded flush with the rear due to the arrangement of the underride guard in accordance with the EC standard.\n\nExtendable drawbar from 1,800 to 2,400 mm (12 x 50 mm).\nFactory set to 2,200 mm. ø 40 mm towing eye.\n\nWarning sign ECE-R70 (red/yellow), splash guard in accordance with the EC directive,\nRump guard with rubber buffers.\n\nLighting and light signaling device in accordance with UN ECE . 48\nIncl. 2 LED license plate lights, LED side marker lights, \nLED clearance lights in the rubber arm.\n \nElectrics: 15- or 2x7-pole according to customer requirements incl.\nAir: Duomatic or yellow/red according to customer requirements incl.\nAccessories available at an extra charge.\n\nAll values stated are approximate dimensions in mm and kg. \n \nDelivery date on request. Leasing possible.\n \nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nYou can find more properties under \n. Cslimjubzt Ds I Arjgt

Condition: new, overall weight: 18,000 kg, empty load weight: 2,985 kg, axle configuration: 2 axles, suspension: air/air, tire size: 4-fach 385/65 R 22,5, wheelbase: 1,310 mm, color: black, Equipment: ABS, Central axle swap body trailer, new vehicle. Version: Standard, without lift axle. ZZW 18.\nAxles (BPW, manufacturer's choice), ABS/EBS disc brake. \n\nCoupling height: 750 mm, high-coupled.\nTop lift: 1,320 mm, bottom lift: 1,220 mm, ride height: 1,255 mm. \nFor parking heights from 1,220 - 1,320 mm.\n\nTires: 4-wheel 385/65 R22.5 (manufacturer's choice) without spare wheel basket. \nSpare wheel available at an extra charge. \n\nWheels with internal sensors and tire pressure monitoring system according to UN ECE R 141 (TPMS)\n\nSuitable for the transport of standardized swap bodies according to EN 284, size C715 and C745.\nSuitable for the transport of standardized containers according to ISO 668/1496, size 20'.\n\nFront outriggers with crank and gearbox. \n\nRear support with 2 galvanized support legs, foldable and height-adjustable.\n\nTowbar with bolted ø 50 mm towing eye. Towbar length (dimension from center of towing eye to front edge of bulkhead): 1,650 mm.\n\nAdditional button for activating the 'brake release function' for tension-free lifting of the vehicle body.\n\nLighting and light signal device in accordance with ECE . 48\nLED side marker lights with direction indicator (flashing function),\n2 LED clearance lights in the rubber arm,\nLED multifunction rear lights,\n2 LED license plate lights,\n1 reversing lights and \n1 additional LED reversing lights. \n\nWheel cover and splash guard in accordance with EC Directive\n\nElectrics: 15- or 2x7-pole according to customer requirements incl.\nAir: Duomatic or yellow/red according to customer requirements incl.\nAccessories available at an extra charge.\n\nAll values stated are approximate dimensions in mm and kg. \n\nDelivery date on request. Leasing possible.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther properties can be found at . Cjlim I Aoubztqoregt

Condition: used, Year of construction: 2007, color: white, overall weight: 18,000 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, smooth steel BDF system 7.45m, rear portal doors, double-decker and keyhole plates smooth steel swap body, portal doors with external espagnolette locks,\n\n\ntypical signs of use, 1 door wing at the rear heavy rust from the outside, stops and grazing damage but tight (see also photos for condition)\nWell suited for storage purposes\n\nInternal keyhole plates and double-decker system.\n\nAll stated values are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä.\nDouble-decker, without beams. Colimsrn T Agj I Arogt

Condition: new, color: white, overall weight: 16,000 kg, empty load weight: 2,520 kg, loading space volume: 45 m³, loading space width: 2,480 mm, loading space length: 7,310 mm, loading space height: 2,480 mm, Swap-body platform, sliding tarpaulin BDF system, 7,450 mm long. Brand new swap-body platform with sliding tarpaulin, BDF system, 7,450 mm long.\nHigh portal doors at the rear with internal espagnolette locks.\n\nBody in RAL 9010 pure white, sliding tarpaulins in RAL 9010 pure white.\nSupport legs in RAL 9005 jet black. Parking height: 1,120 to 1,320 mm.\n\nExternal dimensions: L = 7,450 mm, W = 2,550 mm, H = 2,750 mm.\nTotal weight: 16,000 kg. Empty weight: 2,520 kg.\n\nEquipment:\n30 mm thick, waterproof screen printing plate floor. \nForklift accessible, axle load up to max. 5,460 kg.\nMulti-hole strip on both sides.\n3 rows of aluminum/wood slats. (manufacturer's choice)\n3 lashing rings in the outer frame.\nSliding roof (can only be moved from rear to front) \nIncl. load securing certificate body / tarpaulin EN 12642 Code XL.\n\nDelivery date on request. Delivery possible.\n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found at . . Cgelouuk Irjim I Arot

Condition: used, Year of construction: 2008, color: white, overall weight: 16,000 kg, empty load weight: 2,890 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, smooth steel BDF system 7,450 mm, with roller shutter, branded smooth steel wall swap body with aluminum roller shutter.\ntechnically inspected and provided with new UVV, \nroller shutter and rope repaired,\nwhile stocks last, \nnew paint finish in desired color on request\n\nAll values given are approximate dimensions in mm and kg.\nDelivery time after consultation\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther properties can be found at . Cgelim I Aotyphverot

Condition: new, color: white, overall weight: 16,000 kg, empty load weight: 2,780 kg, loading space volume: 45.7 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,525 mm, Swap body, plywood Plywood swap body, BDF system, 7,450 mm long Brand new plywood swap body, BDF system 7,450 mm long. \nRear portal doors with internal espagnolette locks.\n\nExternal dimensions: L= 7,450 mm, W= 2,550 mm H=2,750 mm. Parking height: 1,320 mm.\nTotal weight: 16,000 kg, empty weight: 2,400 kg.\n\nSupport legs in RAL 9010 pure white and rigid.\n2 rows of combination / slotted-hole lashing rails mounted horizontally on the side walls.\nInstallation: Height center 1st lashing row above floor 800 mm and \nHeight center 2nd lashing row above floor 1,600 mm.\nIncl. 2 locking beams for combination / slotted-hole lashing rails.\nIncl. load securing certificate according to EN 12642 Code XL.\n\n27 mm thick, waterproof screen printing plate floor, strength according to EN 283, \nfor floor loads up to max. 5,460 kg forklift axle load.\nSliding ladder at the rear.\n\nAll stated values are approximate dimensions in mm and kg.\n\nDelivery date on request. Leasing possible. Delivery possible.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther properties can be found at . . Celistu Nqasm I Arogt

Condition: used, Year of construction: 2016, color: white, overall weight: 16,000 kg, empty load weight: 3,320 kg, loading space volume: 47.1 m³, loading space width: 2,374 mm, loading space length: 7,300 mm, loading space height: 2,720 mm, Swap body, smooth steel BDF system, 7,450 mm long, rear roller shutter Used steel swap body, BDF system 7,450 mm long. Smooth side walls, aluminum roller shutter at the rear.\nSemi jumbo, parking height: 1,120 mm\nExternal dimensions: L = 7,450 mm, W = 2,550 mm, H = 2,900 mm. \nWith repaired lock panel - against picture\nInternal keyhole system + double floor\n\nAll values given are approximate dimensions in mm and kg.\nDelivery possible. \n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore properties can be found at . . Cjlim Ietyph As Aregt

Condition: used, Year of construction: 2006, color: white, loading space width: 2,480 mm, loading space height: 2,500 mm, Swap-body platform, drop sides with tarpaulin Swap-body platform BDF system 7.45 m with tarpaulin and bows, portal doors Swap-body platform BDF system 7.45 m, rear high portal doors with external espagnolette locks.\nStandard with a black labeled tarpaulin, which was only renewed a few years ago. \nBody is tight, suitable as storage or for driving school purposes.\n\nAll values given are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found at . . Cgolimjrm Sxno I Arst