Used Menci Refrigerated Semitrailers for sale (16)

Condition: used, empty load weight: 8,980 kg, maximum load weight: 24,020 kg, overall weight: 33,000 kg, axle configuration: 3 axles, first registration: 07/2005, next inspection (TÜV): 07/2025, total length: 2,600 mm, total width: 4,000 mm, total height: 13,970 mm, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | Menci refrigerated trailer | Meat chiller | Overhead rail system | BPW axles, lift axle on 1st position | NL 24,020kg | Lift axle, BPW | Carrier 1800 refrigeration unit | Diesel hours: 5,730h | Jost landing legs with thrust compensation Dedpfx Absymn S Te Aeup

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2020, loading space volume: 92 m³, Equipment: ABS, Ø Standard model, suitable for transporting dry bulk materials and palletized loads Ø Chassis made of STEEL, prepared for Cargo Floor installation Ø 1st axle as lift axle Ø 3 SAF rigid axles, 9 tons each, with Ø 430 disc brakes Ø Air suspension with manual raise/lower valve Ø Support legs with universal foot (flat plate + half wheel) Ø EBS WABCO braking system 2s/2c Ø A.D.R. electrical system Ø Pneumatic parking brake Ø Wheel chocks and holders Ø Side underrun protection Ø 6 PVC mudguards Ø 2 PVC toolboxes Ø Internal dimensions: Length 13,542 mm - Front height 2,660 mm - Rear height 2,814 mm - Width 2,475 mm, volume 92 m³ Ø External dimensions: Length 13,665 mm - Width 2,542 mm - Height above ground 4,000 mm, fifth wheel height 1,150 mm, gross weight 39,000 kg Ø Moving floor system: CF500 Cargo Floor (moving floor) with 21 aluminum slats, thickness 10 mm, standard type (smooth, longitudinally ribbed) Ø Rear floor section made of stainless steel, approx. 300 mm long, about 4 mm thick Ø Remote control in a waterproof control box Ø Maximum pressure valve (225 bar) and high-pressure oil filter Ø Slat movement: 200 mm/cycle Ø Subframe: Fully made from extruded aluminum profiles (crossmembers) Moving floor supported longitudinally by aluminum tubes Corrosion protection by polypropylene foils installed between aluminum and steel parts Ø Front wall: Aluminum profiles 600/30/3/2 mm with reinforced upper profile Ø Front catwalk with 2 ladders for operating the side curtain Ø Connection rail (with sockets) for braking system, lighting, and hydraulics Ø Upper square reinforcement plates between front and side wall Ø Mobile wall: Made of aluminum profiles and curtain bead at the bottom, with reinforced strips for securing the curtain Sliding bulkhead, suspended on trolleys with slide bearings on 2 tracks Ø Side wall: Made of aluminum profiles 600/30/3/2.5 mm, welded to the inner and outer contour Upper surrounding profile with a rail for the movable partition Ø Rear frame: Made of aluminum profiles, with 2 doors made of aluminum profiles 600/30/3/2.5 mm, 50 mm peripheral door profile, double seal Ø 4 aluminum hinges with galvanized pins (vertical), upright with handle Fully bolted stainless-steel closure with vertical tube bar for each door Ø Rotating upper rear cross member (one piece) Ø Safety device for door release (pneumatically operated) Ø Roof: 4 removable cross members Curtain fastening straps, vertical with 4 side tensioning straps 2 tension belts over the entire length Ø Tarpaulin 900 g/m² Fastening of the right-side tarpaulin with rivets along the surrounding profile Ø Chassis color: SILVER GREY MENCI Ø Body color: MENCI SILVER GREY Ø Tarpaulin color: RAL 9006 Ø Standard accessories: 4 safety hooks for tarpaulin Holder for shovel, broom, and rake Dujdpfxsypa Hbj Ab Aep Pressure gauge for weight control (63 mm diameter) in the moving floor’s control box Compressed air gun connection on the left rear side Prepared for tarp roller (floor tarp) at the rear Rear foldable guard for tail lights Ø Additional special equipment: 6 SPEEDLINE light alloy rims, 385/65 R 22.5, offset 120 Ø RADIO REMOTE CONTROL All information without guarantee!

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2020, loading space volume: 92 m³, Equipment: ABS, Ø Standard model, suitable for transporting dry bulk goods and palletized loads Ø Chassis made of STEEL, pre-equipped for Cargo Floor Dsdpfx Aeypa Dyeb Asup Ø First axle is a lift axle Ø 3 SAF rigid axles, 9 tonnes each, with 430mm disc brakes Ø Air suspension with manual lift/lower valve Ø Support legs with universal foot (flat plate + half wheel) Ø EBS WABCO braking system 2s/2c Ø ADR-compliant electrical system Ø Pneumatic parking brake Ø Wheel chocks and brackets Ø Side underrun protection Ø 6 PVC mudguards Ø 2 PVC toolboxes Ø Internal dimensions: Length: 13,542 mm - Front height: 2,660 mm - Rear height: 2,814 mm - Width: 2,475 mm, Volume: 92 m³ Ø External dimensions: Length: 13,665 mm - Width: 2,542 mm - Height above ground: 4,000 mm, Fifth wheel height: 1,150 mm, Gross weight: 39,000 kg Ø Moving floor: CF500 Cargo Floor (moving floor system) with 21 aluminium planks, 10mm thick, standard type (smooth, longitudinally ribbed) Ø Rear end of the floor (approx. 300 mm) made of stainless steel, approx. 4mm thick Ø Remote control in a waterproof control box Ø Max. pressure relief valve (225 bar) and high-pressure oil filter Ø Plank movement: 200 mm/cycle Ø Subframe: Ø Fully made from extruded aluminium profiles (cross members) Ø Moving floor supported longitudinally by aluminium tubes Ø Corrosion protection provided by polypropylene sheets installed between aluminium and steel Ø Front wall: Ø Made from 600/30/3/2 mm aluminium profiles, with reinforced upper profile Ø Front walk-on platform with 2 ladders for operating the side curtain Ø Connection bar (with sockets) for braking system, lighting, and hydraulics Ø Upper square reinforcement plates between front and side wall Ø Movable partition: Ø Made from aluminium profiles and tarp bead at floor, with reinforced strips for tarp fixing Ø Sliding bulkhead, mounted on carriages with slide bearings on 2 rails Ø Side wall: Ø Made from 600/30/3/2.5 mm aluminium profiles, welded on both inner and outer contours Ø Upper surrounding profile, with rail for the mobile partition Ø Rear frame: Ø Made from aluminium profiles, with 2 doors from 600/30/3/2.5 mm aluminium profiles, 50 mm surrounding door profile, double sealing Ø 4 aluminium hinges with galvanized pins, vertically aligned with handle Ø Each door with fully bolted stainless steel lock and vertical rod Ø Rotating one-piece upper rear crossbar Ø Safety device for unlocking doors (pneumatically operated) Ø Roof: Ø 4 removable roof bows Ø Curtain fastener straps vertical, with 4 lateral tensioning straps Ø 2 tension straps along the full length Ø Tarp 900 g/m² Ø Right curtain attached by rivets along the perimeter profile Ø Chassis color: SILVER GREY (MENCI) Ø Body color: MENCI SILVER GREY Ø Curtain color: RAL 9006 Ø Standard accessories: Ø 4 safety hooks for tarpaulin Ø Bracket for shovel, broom, and rake Ø Manometer for load control (63 mm diameter) in moving floor control box Ø Compressed air gun connection on the left rear side Ø Prepared for tarp roller (floor tarp) at rear Ø Rear foldable protection for tail lights Ø Additional special equipment: Ø 6 SPEEDLINE light alloy rims 385/65 R 22.5, ET 120 Ø RADIO REMOTE CONTROL All information subject to change. No liability for possible errors.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 31 m³, Equipment: ABS, Menci Grapar TSA 105 PED NEW | 31,000 l | 3 Compartments | Pressure Tank | ATP | for €89,000 New vehicle – individually configurable according to your application requirements. PED-certified stainless steel pressure tank for the professional transport of sensitive liquid products. Designed to meet the highest standards in safety, hygiene, and quality. --- Highlights --- • PED pressure tank compliant with EU 2014/68 • Total capacity: 31,000 liters • 3 compartments for flexible product separation • Tank made of AISI 304 L stainless steel, internally polished • ATP-insulated – suitable for temperature-sensitive products • CIP cleaning system combined with compressed air system • High-quality SAF chassis with lift axle --- Technical Data (Excerpt) --- • Total tank capacity: 31,000 liters • Compartment division: 12,500 l / 6,000 l / 12,500 l • Operating pressure: 2.0 bar • Design pressure: 2.2 bar • Test pressure: 3.5 bar • Compartments: 3, with cone-bottom valves DN 100 • Certification: PED EU/2014/68 (simultaneous pressurization of all chambers) • Axles: SAF INTRADISC PLUS, disc brakes Ø 430 mm • Lift axle: 1st axle, fully automatic, load-dependent --- Standard Equipment (Excerpt) --- • Grapar brand tank, AISI 304 L stainless steel • Internal polish to Code 1 – food-grade standard • Pressure manhole DN 500 with safety valves • Stainless steel manhole boxes with insulated doors & drain • CIP cleaning system with 5 removable spray heads • Compressed air system with air reservoir & process filter housing • Left-side catwalk made of anodized aluminium with folding stainless steel handrail • Folding stainless steel access ladder • Gravity discharge through insulated outlets --- Chassis & Safety --- • Frame made of fine-grain steel, fully hot-dip galvanized • SAF 3-axle unit, disc brakes Dodpfx Abeypa Hho Asup • WABCO EBS braking system (2S/2M) including stability program • Automatic lift axle control with starting aid • Air suspension with automatic level regulation • Spray guard system in accordance with EU 109/2011 • Rear underrun protection according to ECE-R58R03 • ASPÖCK LED lighting system --- Included Options / Equipment --- • SPEEDLINE 22.5" aluminium wheels • Premium tires 385/65 R22.5 • Stainless steel toolbox & sterile box • Spare wheel carrier including mounting kit • Stainless steel collector & reducers • Additional cleaning and ventilation connections • Chassis color MB 7350 Novagrau • Complete ECE signage & reflective marking Additional equipment and custom configurations available upon request – we configure your vehicle exactly according to your specifications. Sample photo. Equipment may vary depending on configuration.

Condition: good (used), functionality: fully functional, empty load weight: 3,900 kg, maximum load weight: 32,900 kg, overall weight: 36,800 kg, axle configuration: 3 axles, first registration: 10/1999, loading space length: 6,800 mm, loading space width: 2,550 mm, suspension: air, tire size: 385.65 r 22.5, color: silver, trailer brake: trailer braked, Year of construction: 1999, Equipment: ABS, Menci 20-foot tipping container semi-trailer, year 1999, tipping skeletal frame for 20-foot container, 3 axles with 1st liftable, ABS, aluminium chassis with single-acting tipping hydraulic cylinder, ADR, air suspension with height control valve, DEALER INTERDRIVE SRL–PARMA. Dedpoym Ap Hofx Ab Asup

Condition: used, maximum load weight: 32,150 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2009, loading space volume: 32 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Insulated tank body for foodstuffs, capacity 32,000 liters, 4 compartments, 4 manhole covers, top loading, cleaning line, central rear outlet, catwalk with mechanically folding handrail on tank, temperature gauge for each compartment, support winch(es), ABS, EBS, BPW axle(s), disc brake system, air suspension with lift and lowering function, lift axle. Vehicle may be covered with advertising decals and/or lettering. Dodpfx Asyc Alyob Aoup SI85975 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide you with an offer through our partner workshops! The vehicle may be covered with advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this item. Please contact us!

Condition: used, maximum load weight: 33,470 kg, overall weight: 37,500 kg, axle configuration: 3 axles, first registration: 10/2008, Container semi-trailer for 20-foot containers with tipping device BPW axles Air suspension Lift axle Dodpfeyf Tinjx Ab Aoup Aluminium frame

Condition: good (used), functionality: fully functional, overall weight: 39,000 kg, axle configuration: 3 axles, suspension: air, Year of construction: 2015, operation weight: 32,700 kg, Equipment: ABS, Sattelauflieger Menci SA850R ALU-Muldenkipper 36cbm with verschiebbarer Plane 3 Achsen luftgefedert BPW-Achsen zGG 39,000kg - Nutzlast 32,700kg Total-Länge Sattelauflieger 10.7m Breite 2.55m 1. Achse höhenverstellbar 3. Achse lenkbar Reifen 50% (385/65 R22.5) ABS Duedpfetznalox Ab Aop alle Angaben ohne Gewähr/Irrtum vorbehalten

Condition: good (used), functionality: fully functional, overall weight: 39,000 kg, axle configuration: 3 axles, suspension: air, color: white, Year of construction: 2015, operation weight: 32,700 kg, Equipment: ABS, Sattelauflieger Menci SA850R ALU-Muldenkipper 36cbm with Plane luftgefedert 3 Achsen BPW-Achsen zGG 39,000kg - Nutzlast 32,700kg Total-Länge Sattelauflieger 10.7m 1. Achse höhenverstellbar 3. Achse lenkbar Dsdpjtzlxlofx Ab Aoup Reifen 50% (385/65 R22.5) ABS alle Angaben ohne Gewähr/Irrtum vorbehalten

Condition: good (used), functionality: fully functional, overall weight: 39,000 kg, axle configuration: 3 axles, suspension: air, Year of construction: 2015, operation weight: 32,700 kg, Equipment: ABS, Sattelauflieger Menci SA850R ALU-Muldenkipper 36cbm with verschiebbarer Plane luftgefedert 3 Achsen Djdpfxotzlmie Ab Ajup BPW-Achsen zGG 39,000kg - Nutzlast 32,700kg Total-Länge Sattelauflieger 10.7m Breite 2.55m 1. Achse höhenverstellbar 3. Achse lenkbar Reifen 50% (385/65 R22.5) ABS alle Angbaen ohne Gewähr/Irrtum vorbehalten

Condition: good (used), functionality: fully functional, overall weight: 39,000 kg, axle configuration: 3 axles, suspension: air, Year of construction: 2015, operation weight: 31,800 kg, Equipment: ABS, Settelauflieger Menci SA105R N ALU-Muldenkipper 52cbm with verschiebbarer Plane 3 Achsen luftgefedert BPW-Achsen zGG 39,000kg - Nutzlast 31,800kg Dedpfx Abstv Eiue Aoup Total-Länge Settelauflieger 12.04m Breite 2.55m 1. Achse höhenverstellbar 3. Achse lenkbar Reifen 50% (385/65R22.5) ABS alle Angaben ohne Gewähr/Irrtum vorbehalten

Condition: good (used), functionality: fully functional, maximum load weight: 39,000 kg, axle configuration: 3 axles, first registration: 12/2015, loading space volume: 36 m³, suspension: air, Year of construction: 2015, operation weight: 32,700 kg, Equipment: ABS, Sattelauflieger Menci SA850R ALU-Muldenkipper 36cbm with verschiebbarer Plane 3 Achsen luftgefedert zGG 39,000kg - Nutzlast 32,700kg Dedpfstv Dn Tox Ab Asup BPW Achsen Total length LKW 10.70m Breite 2.55m 1. Achse höhenverstellbar 3. Achse lenkbar Reifen 50% (385/65 R22.5) ABS alle Angaben ohne Gewähr/Irrtum vorbehalten

Condition: used, functionality: fully functional, maximum load weight: 47,000 kg, axle configuration: 2 axles, first registration: 02/2006, loading space volume: 26 m³, Year of construction: 2006, operation weight: 39,100 kg, Equipment: ABS, - Sattelauflieger Menci SA740M - Muldenkipper 26cbm - 2 Achsen - luftgefedert - zGG 47,000kg - Nutzlast 39,100kg - Total-Länge Sattelauflieger 8.40m Dusdpfx Aswqgyleb Ajp - Reifen 50% (13 R22.5) - ABS - Exportnettopreis 9,500.00 Euros - alle Angaben ohne Gewähr/Irrtum vorbehalten

Condition: good (used), functionality: fully functional, empty load weight: 9,000 kg, maximum load weight: 29,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 08/2006, loading space length: 10,500 mm, loading space width: 2,440 mm, loading space height: 2,200 mm, loading space volume: 55 m³, suspension: air, tire size: 385.65 r 22.5, color: red, Year of construction: 2006, Equipment: ABS, sem Menci iron scrap tipping tank 55m3 capacity, menci aluminum frame and reinforced steel OMT case, 3 disc axles with1st liftable and 3rd steerable, ebs, folding tailgate with manual hold-down stops, sliding electric discover cover and pvc sheet, double stainless steel tool box, rear swivel shock guard, 9 Ton tare, year 2006, overhauled until 30.06.2024-CONCESSIONARY INTERDRIVE SRL-PARMA Dujdpfx Abjtt Dyxe Asp

Condition: new, tire size: 315/80R22.5, Equipment: ABS, 🇮🇹SEM. MENCI SA700G TIPPER BODY - CHASSIS TYPE: SA700G - AXLE BRAND: ROR - DRUM ETO - AXLE CONFIGURATION: 1 STEERING AXLE + 2 FIXED AXLES - DISC BRAKES - BRAKING SYSTEM: KNORR, 2 SENSORS / 2 CHANNELS, LIFTING 1 AXLE - WHEELBASE: 1310 mm - STANDARD LANDING LEGS - CHASSIS COLOR: MENCI METALLIC GRAY - MANUAL UNDER-RUN BAR - PENTA HYDRAULIC CYLINDER - BODY TYPE: ROUND - BODY MATERIAL: STEEL - BODY LENGTH: 7450 mm - BODY HEIGHT: 1840 mm - REAR DOOR: TYPE B, 20-DEGREE INCLINE - BODY CAPACITY: 30m³ - FLOOR THICKNESS: 5.5 mm HB 500 - SIDE WALL THICKNESS: 3.5 mm HB 500 - FRONT WALL THICKNESS: 4 mm HB 500 - DOOR THICKNESS: 4 mm HB 500 - HYDRAULIC DOOR OPENING - HYDRAULIC DOG RELEASE - 2 SAFETY LOCKS BODY COLOR: IVECO WHITE IC194 SIDE STRIPES COLOR: BLUE RAL 5010 DOOR WITHOUT SEAL TMPS BRAND: KNORR Djdpfx Abovzh T Ns Aeup REAR LIGHTS: EUROPOINT III - N. 10 SPEEDLINE DISCS 22.5 x 9.00, BOLT HOLE D. 26 - N. 10 TYRES: GY 315/80R22.5KMAXSG2 VIBRATOR PRE-SETTING STAINLESS STEEL TOOLBOX 400x300x450 mm STANDARD MANOMETER 2 TOW HOOKS RAPID DUMP WITH BUTTON CRAMARO ELECTRIC SHEET SYSTEM, TYPE C REMOTE-CONTROLLED SHEET SYSTEM: YES COLOR: BLUE RAL5010 BOW HEIGHT: 500 mm ROLLER HOOKS POSSIBILITY OF CUSTOMIZED FINANCING OR LEASING AT SITE. FROM 24 UP TO 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER BRANCHES OF OUR GROUP: DOMENICO TRUCK SRL, NAPLES HEADQUARTERS DOMENICO ESPOSITO S.P.A., EBOLI (SA) - OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 335 6713062 - 377 7064530 BRANCH OPENING HOURS: MONDAY-FRIDAY: 8:30/19:00 SATURDAY: 08:30/14:00 WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-trailer – Refrigerated Tip-Trailer – Lamberet - Schmitz Isuzu – Flatbed – Crane – Tipper – 4 axle – Rear 4 Axle – Tway-T-Way-540- 460 HP – Xway-X-Way– Three-Way Tipper – V8 – Scania – Frost Edition Curtain Side – Box Body – Loader Sideboard – Refrigerated Cell – Insulated with Fridge – Van Domenico Truck srl accepts no responsibility for any discrepancies in technical equipment, optional features, or specifications which may, in some cases, differ from those described. Please verify the features of the specific vehicle.

Condition: new, functionality: fully functional, overall weight: 39,000 kg, tire size: 385/65R22.5, Equipment: ABS, 🇬🇧 MENCI SEMITRAILER WITH “SQUARE” TIPPER BODY - SA850R Volume: 45.4 m³ Dimensions: 9,200 x 2,000 mm Floor thickness: 6 mm Rear floor thickness: 8 mm Kerb weight: 6,650 kg Gross vehicle weight (GVW): 39,000 kg Description, Version & Accessories: - 3rd SAF steered axle with disc brakes or 430 (ET120) 2/2 - 1st axle with automatic lift - CRAMARO electric fully-sealed sliding cover type C (2023) with protective enclosure - Stainless steel toolbox 90x50x50 cm - Toolbox in 90x50x25 cm - Complete ADR kit + A and R plates - Pressure gauge - Electric vibratory motor operated via remote control for tipper body - PROMETEON tyres 385/65 R22.5 - Steel rim 385/65 R22.5 offset 0/120 - Remote control for CRAMARO cover - Additional rear LED work light - Painted hubs - Full LED rear lights - TPMS tyre pressure monitoring system - Hub colour: RED RAL 3020 - Cover tarpaulin colour: BLUE RAL 5002 - Sliding cover with arch height H=300 mm, ADR-rated tarpaulin - 3 climbing steps - Anti-wear corner triangles Steel chassis and alloy body Standard Configuration: - Steel chassis - Air suspension with manual height adjustment valve - Jost landing legs with oscillating curved base Dusdpovzh T Aofx Ab Ajp - Brake system with EBS 2S/2C and brake force regulator - Electrical system compliant with ADR regulations - Aluminium air tanks, pneumatic quick dump device for suspension - Tipping system with 5-stage front telescopic cylinder - Pneumatic parking brake - Descent safety valve, dual line hydraulic ram with shut-off valve - Front ladder and removable ladder over mudguards - 2 drawbar mounting holes on rear underrun bar Custom financing or leasing solutions available on site. From 24 up to 96 monthly instalments, also with zero down payment. OUR OTHER LOCATIONS: DOMENICO TRUCK SRL NAPLES OFFICE DOMENICO ESPOSITO S.P.A. EBOLI (SA) - OFFICIAL DEALER: MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 - 377 7064530 OFFICE HOURS: MONDAY-FRIDAY 8:30–19:00 - SATURDAY 08:30–14:00 WE OFFER A LARGE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500 - V8 - 650 - 580 - 730 - S500 - S 500 - S500 – Stralis – Man - Nissan V8 - Intarder - 770s - Limited Edition - 660 S Semitrailer - Refrigerated Tipper Semitrailer – Lamberet - Schmitz Isuzu – Flatbed – Crane – Tipper – 4 Axles - Rear 4 Axles - Tway - T-Way - 540 - 460 HP - Xway - X-Way - Three-way tipper - V8 - Scania - Frost Edition Curtainsider - Box - Tail-lift Van - Refrigerated Cell - Isothermal with Fridge - Van Domenico Truck srl accepts no liability for any discrepancies in technical specifications, options, or features which may, in some cases, differ from those listed in the description. We recommend checking the specific vehicle’s features.