Used Max Trailer Low Loader for sale (38,066)

Condition: used, machine/vehicle number: SZFNN2520JLD1xxxx, Year of construction: 2018, Please provide reference number upon request: 24393 General Model year: 2018 EU roadworthiness approval valid until: 15 June 2027 Make and model: Istrail Machine Semi-Trailer Number of axles: 3 Information Low loader trailer Internal length, stage 1: 4.615 m Internal length, stage 2: 7.810 m Hydraulic loading ramps Hydraulic widening of loading ramps Dimensions and Weight Overall length: 1,371 cm Unladen weight: 9,900 kg Maximum payload: 38,100 k Km: 1 Nwjdpfxszz E Rzo Adhel Technical approved: Yes EU-approved until: 15.06.2027 Own weight: 9900 Total Weight: 48000 Payload: 38100 Width: 255 Length: 1371 Model: 3 akslet Maskinsemi m/ hydraulisk kjørebroer = More information = Please contact ATS Norway for more information

Condition: new, empty load weight: 10,100 kg, maximum load weight: 38,900 kg, overall weight: 49,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, suspension: air, tire size: 245/70 R 17,5, Equipment: ABS, Chassis: -Sturdy welded steel frame construction with front frame cranking and flat loading platform with rear tapered section approx. 500x100 mm -Frame neck 200 mm with chamfered corners -Chamfered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area behind the rear taper) -2 kingpin positions with interchangeable 2” kingpin -Outer frame closed to the outside as perforated outer rail for lashing with tie-down straps (no chains possible) -Reinforced frame design / point load at center of gravity -Preparations for extendable loading platform wideners -With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle extending to end of vehicle -1 pair of wheel recesses in front of axle with steel covers -(Covers with Körapur coating), depth approx. 400 mm as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers -Underride guard = extended end plate -Drop-down rear support legs Ramps: -2-part special design loading ramps with mechanical extension -Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting gear (only in combination with electrohydraulic unit) -Width approx. 800 mm -Wooden ramp surface -Including traction ribs on loading ramps -Can be secured in transport position with tie-down straps -Operated via control lever, mounted at rear on right side in driving direction -Laterally shiftable via hydraulics Njdpfswviwkex Adhowl Floor: -35 mm larch wood floor with aluminum omega profiles Landing Legs: -Mechanical 24-ton landing legs with single-side operation and load compensation Axles, Steering, and Tires: -BPW air suspension axles, 10 tons axle load each, air bellows diameter 360 mm -S-cam brakes 300/200 mm, asbestos-free brake linings -Automatic brake slack adjusters -Lift and lower device with total lift approx. 200 mm -2nd transport position via ball valve +50 mm -1st axle lifting axle (wired via EBS), fully automatic activation with mechanical emergency actuation via push button on the trailer -3rd axle as friction-steered trailing axle with electric and mechanical lock -12 steel disc wheels, 10-hole, center offset -12 tires 245/70 R 17.5 143/141J, tubeless -Including tire pressure monitoring Accessories: -Stakeboard side and rear walls on the gooseneck, approx. 400 mm high, plug-in design -Spare wheel holder -Side aluminum underrun protection -4 wheel chocks -Long license plate mount on rear end plate -1 ECE warning panel at the rear, plug-in -11 pairs of ZK 10t side lashing modules: -2x on the gooseneck -9x on the loading platform -Steel fenders with Clear-Pass -Extendable warning boards incl. 3 position lights each, at the front on the landing legs and at the rear in front of end plate, smoothly extendable up to loading width of 4,500 mm -4 holders for warning panels, plug-in, in stake pockets on the loading platform -6 pairs of side stake pockets for 100x50 mm plug-in stanchions -2 cross rows of stake pockets for 100x50 mm stanchions on the gooseneck from outer frame to main frame (1x before and 1x after kingpin positions) -3 cross rows of stake pockets for 100x50 mm stanchions on the loading platform from outer frame to main frame (1x at the front section, 1x before 1st axle, 1x after 3rd axle) -2 pairs of steel plates in the platform for container locks to accommodate 1x 20ft container -Rubber skirt mounted on underride guard -Steel shot blasting, hot-dip galvanizing of chassis and priming -Paintwork chassis/wheel hubs/outer frame i

Condition: good (used), functionality: fully functional, empty load weight: 2,380 kg, maximum load weight: 8,120 kg, overall weight: 10,500 kg, Year of construction: 2019, Manufacturer: Humbaur Type: BA02 / 2-Axle Year: 2019 Unladen weight: 2,380 kg Payload: 8,120 kg Nwedpfsz Dvbmex Adhel Gross vehicle weight: 10,500 kg

Condition: new, maximum load weight: 2,805 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,680 mm, loading space height: 300 mm, Saris Magnum Explorer 3500 V Machine Transporter New, robust excavator and machinery transport trailer with low loading height and excellent chassis Loading area dimensions: 306 x 168 x 30 cm (LxWxH) Gross vehicle weight: 3,500 kg Features: * Fully welded and hot-dip galvanized frame * Heavy-duty steel ramps (140cm, continuously adjustable) * Solid waterproof wooden floor Nwjdpjx T Sacjfx Adhjl * 10 heavy-duty lashing rings (1,000kg each) * Heavy-duty jockey wheel * Reinforced walk-on mudguards * Protected lighting bar * Price includes vehicle documents! Available accessories: * Excavator bucket holder for €199 incl. VAT (see photos) * Force One package (aluminum tread plate on wooden floor) for €499 incl. VAT (see photos) * Mesh partition between ramps at the rear for €599 incl. VAT * Removable rear panel for €239 incl. VAT * 100 km/h conversion for €290 incl. VAT * Further accessories available on request Sales, consultation, and pickup in Zell by appointment. Please note that due to current material shortages among suppliers, trailer, accessory, and component prices may vary due to surcharges for increased material costs. Subject to prior sale and errors. Please inquire for current availability and final prices. We always have a wide selection of new car trailers from the brands Saris, Böckmann, Stema, Pongratz, Humbaur, and WM-Meyer available immediately or at short notice. Also available to order online. For home transport, we are happy to provide our temporary registration plates for €20. Delivery within Germany is available for an additional charge!

Condition: new, maximum load weight: 2,700 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 1,820 mm, loading space height: 300 mm, Saris Magnum Maxx 3500 V Excavator Transporter Njdpfx Aex T Scwjdhjwl New robust excavator and machinery transport trailer with low loading height and excellent running gear. Large version with 4-meter loading area length! Loading area dimensions: 406 x 182 x 30 cm (LxWxH) Permissible total weight: 3,500 kg * Fully welded and hot-dip galvanized frame * Heavy-duty steel ramps (140 cm, infinitely adjustable) * Solid waterproof wooden floor * 10 heavy-duty lashing rings (1,000 kg each) * Heavy-duty jockey wheel * Reinforced walk-on mudguards * Protected lighting bar * Price includes vehicle registration documents! Available accessories: * Force One package (aluminum checker plate on wooden floor & tread plates on mudguards) for €699 incl. VAT * Excavator bucket rest for €199 incl. VAT (see pictures) * Removable tail board for €239 incl. VAT * Rear mesh insert between ramps for €649 incl. VAT * 100 km/h upgrade for €290 incl. VAT * Additional accessories available upon request Sales, consultation, and collection in Zell by appointment only. Please note: Due to the current material shortages at suppliers, quoted prices for trailers, accessories, and components may vary due to surcharges for increased material costs. Subject to prior sale and errors. Please enquire for availability and final prices. Constantly large selection of new car trailers from Saris, Böckmann, Stema, Pongratz, Hapert, and WM-Meyer available immediately or at short notice. Also available to order online. For self-transport, we can provide a temporary registration plate for €20. Delivery within Germany available at an additional charge!

Condition: used, maximum load weight: 5,500 kg, overall weight: 7,500 kg, axle configuration: 2 axles, first registration: 09/1994, next inspection (TÜV): 02/2026, loading space length: 4,660 mm, loading space width: 1,890 mm, total length: 6,940 mm, total width: 2,500 mm, Hoffmann low loader, type LTD 11.T, de-rated, in standard version with loading ramps, air brake system, front toolbox, TÜV valid until 02/2026, in good and ready-to-use condition. Nwodpfxsxq Uf He Adhsl

Condition: used, maximum load weight: 4,680 kg, overall weight: 6,500 kg, axle configuration: 2 axles, first registration: 01/1999, loading space length: 1,900 mm, loading space width: 4,550 mm, total length: 6,650 mm, total width: 2,500 mm, total height: 2,500 mm,

Condition: used, machine/vehicle number: XNTSXD3500007xxxx, Year of construction: 2012, Please provide reference number upon request: 23655 Specifications: 2012 model Air suspension Tires (see pictures) Length of the child: approx. 383 cm Tool cabinet Length: 1,375 cm Width: 254 cm Wheelbase: 131/220 cm Curb weight: 10,720 kg Max payload: 39,280 kg Description: Pacton Br nntrailer from 2012. Can be delivered within a short time. Technical approved: no EU-approved until: 26.09.2026 Own weight: 10720 Nsdpfjzqplhjx Adhewl Payload: 39280 Width: 254 Length: 1375 Model: SDX350 Brønnhenger = More information = Please contact ATS Norway for more information

Condition: used, maximum load weight: 5,000 kg, overall weight: 6,900 kg, axle configuration: 2 axles, first registration: 07/2008, loading space length: 4,580 mm, loading space width: 2,030 mm, total length: 7,000 mm, total width: 2,550 mm, total height: 2,870 mm, * Blomenröhr 552/6900 low-loader * 2 axles Nwsdpfjytzi Sox Adhel * 5-ton payload * Height-adjustable tandem * Original integrated ramps

Condition: new, functionality: fully functional, empty load weight: 596 kg, maximum load weight: 2,904 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 2,880 mm, loading space width: 1,500 mm, tire size: 195/50R16C 104/101N, Year of construction: 2025, For sale is a brand new braked 2-axle trailer / low-loader for construction machinery from the brand Martz, Type 4, with a gross vehicle weight rating of 3,500 kg! The trailer features a phenolic plywood floor with lashing eyes and a bucket rest area. With a payload capacity of 2,904 kg, this trailer is ideal for transporting construction and landscaping equipment. The trailer is AVAILABLE IMMEDIATELY! Overall trailer dimensions (L/W/H): 5,000 x 2,100 x 1,740 mm Technical data: - Loading area dimensions: 2,880 x 1,500 mm - Gross vehicle weight: 3,500 kg - Unladen weight: 596 kg - Payload: 2,904 kg - Overrun brake system from KNOTT - Axles with braking system from KNOTT - LED marker lights - LED outline marker lights - Rear lights - Hot-dip galvanized loading ramp with support bracket - Bucket holder Nsdpfx Adew Tdttjhowl - Phenolic plywood floor incl. lashing eyes for securing loads - Axle load per axle 1/2: 1,800/1,800 kg - Shock absorbers on the axles for possible 100 km/h approval - Tires 195/50R16C 104/101N - Automatic jockey wheel - Support load: 250 kg - V-drawbar Specifications subject to change without notice. Errors and omissions excepted.

Condition: used, empty load weight: 7,400 kg, maximum load weight: 16,600 kg, first registration: 03/2011, next inspection (TÜV): 12/2025, total width: 25,500 mm, suspension: air, tire size: 245/70 R 17.5/7mm, front tire size: 245/70 R 17.5/7mm, operation weight: 24,000 kg,

Condition: new, empty load weight: 8,500 kg, maximum load weight: 40,500 kg, overall weight: 49,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, suspension: air, tire size: 245/70 R 17,5, color: grey, Equipment: ABS, Chassis: -Sturdy steel frame welded construction with front frame cranking and flat loading area, rear taper approx. 500x100 mm -Frame neck 200 mm with beveled corners -Beveled end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper) -2 king pin positions with interchangeable 2” king pin -Outer frame closed to the outside as a perforated outer frame for lashing with tie-down straps -Reinforced frame design / point load at center of gravity -Provisions for extendable widening of the loading area -With excavator recess, depth approx. 220 mm, width approx. 600 mm, starting approx. after the 2nd axle to the end of the vehicle -1 pair of wheel recesses in front of axle with steel covers -(Covers with Körapur coating), depth approx. 400 mm and 1 pair of wheel recesses between 1st and 2nd axle with steel covers -Underrun protection = extended end plate -Drop supports at the rear Ramps: -2 single-piece aluminum loading ramps with spring assist -Length x width approx. 2,500 mm x 600 mm -Can be secured in transport position with tie-down straps -Laterally manually adjustable Floor: -35 mm larch wood floor with aluminum omega profiles Landing gears: -Mechanical 24 t landing gears with single-side operation and load compensation Axles, steering, and tires: -BPW air suspension axles, each 10 t axle load, air bag diameter 360 mm -S-cam brake 300/200 mm, asbestos-free brake linings -Automatic slack adjusters -Lift and lowering device with total lift approx. 200 mm -2nd driving position via ball valve +50 mm -1st axle lift axle (wired via EBS), confirmation fully automatic with mechanical emergency actuation via push button on the trailer -3rd axle as self-steering trailing axle with electric and mechanical lock -12 steel disc wheels, 10-hole, with center offset -12 tires 245/70 R 17.5 143/141J, tubeless -Incl. tire pressure monitoring Brake system: -Dual-line brake with EBS-E incl. RSS -EBS (WABCO 4S3M) -Spring-actuated parking brake -Air connection yellow / red Painting: -Steel grit cleaning, sprayed galvanizing of chassis and primer -Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau -Plastic parts black, unpainted -Rims: factory silver -Reflective strips on the sides and rear in yellow Accessories: -Side and rear plug-in side walls on gooseneck approx. 400 mm high -Spare wheel holder -Aluminum approach guard -4 wheel chocks -Steel fenders with Clear-Pass -Elongated license plate bracket in the end plate -1 removable ECE sign at rear -11 pairs ZK modules 10t on the side: -2x on gooseneck -9x on loading area -Without rear towing eyes -Extendable warning panels incl. 3 position lights each, at the front on the landing gears and at the rear before the end plate, infinitely extendable up to loading width 4,500 mm -4 plug-in mounts for warning panels in stake pockets on the loading area -6 pairs of side stake pockets for plug-in stakes 100x50 mm Nwodpfx Aowu Agiodhsl -2 rows of transverse stake pockets for plug-in stakes 100x50 mm on gooseneck from outer frame inward to main frame (1x in front of and 1x after king pin positions) -3 rows of transverse stake pockets for plug-in stakes 100x50 mm on the loading area from outer frame inward to main frame (1x at the front section, 1x before 1st axle, and 1x after 3rd axle) -2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container -Rubber apron mounted on underrun protection

Condition: new, empty load weight: 15,450 kg, maximum load weight: 65,550 kg, overall weight: 80,000 kg, axle configuration: > 3 axles, loading space length: 21,900 mm, loading space width: 2,540 mm, loading space height: 925 mm, suspension: air, tire size: 235/75 R 17.5, color: grey, Equipment: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10° Technical fifth wheel load: 30,000 kg. For tractor units: 4x2, 6x2 and 6x4 Loading area: Loading area in double-extendable design, length approx. 8,800 mm with bevel at the rear approx. 500 mm x 10°. A support table approx. 300 mm wide with long holes at the front and rear for optional bridging elements that can be hung and moved is welded to the middle support. Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length. Axles and tires: BPW axles and suspension, 1st axle with pre-steering, all other axles with hydro-mechanical forced steering. 1st axle with electro-magnetic reversing lock that can be activated via reverse gear and manually. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Manufacture of our choice Nsdpfx Ajrigw Rjdhowl Sockets and lighting: 24-volt lighting system Design in accordance with EU regulations ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Complete HRM metallization Complete steel construction shot blasted, then hot-finished with ZINACOR 850 Paint: 6-K final treatment: Complete steel construction shot blasted after welding 1 layer of zinc-based base paint, 1 layer of adhesion primer. Final painting with 2 layers of 2-K paint in one color in DB 7350 Nova gray, then sealing of the cavities with special wax Accessories: Bulkhead made of steel, pluggable, approx. 400 mm high Connection strip for supply lines to the tractor unit, attached at the height of the outer frame profile ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin. If your pin assignment differs from the ISO connection standard, please let us know 3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches On the gooseneck 1 pair of plug-in aluminum side walls, approx. 400 mm high, in anodized design. 3.5" kingpin. Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide 2 brake shoes with bracket in front of the bulkhead. Mechanical seat supports with 2-speed gearbox and crank. Control valves for the hydraulic ramps on the right of the vehicle 1 pair of mechanical rear supports. Central lubrication system with 1 pump, brand BEKAMAX, with normal grease according to NLGI-2 Removable protection around the central lubrication pump(s) Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles, without installation in the tractor unit Under the gooseneck, as well as on the end cross member, left and right, one 7-pin socket with bracket for the warning signs A 7-pin socket on the end cross member Manual and description One INOX storage box, one-piece, approx. 2,480 x 340 x 390 mm in a straight design Please note that Special equipment and accessories generally increase the dead weight and reduce the payload accordingly Warning package: 4 warning signs, approx. 423 x 423 mm, extendable by approx. 1,000 mm, including 2 LED position lights and brackets for rotating beacon.

Condition: used, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 09/1999, loading space length: 5,000 mm, loading space width: 2,000 mm, Year of construction: 1999, Whatsapp: _____ Obermaier T105 Low Loader/Ramp Trailer ? Manufacturer: Obermeier ? Type: SDAH Low Loader ? First registration: September 27, 1999 ? Ramps ? Manual winch ? Internal dimensions: L: 5 meters x W: 2 meters ? Load board height: 40 cm ? 40 mm trailer hitch ? Electrical and air connection ? Adjustable height coupling device ? Tire size: 235/75R 17.5 140J ? Unladen weight: 2500 kg ? Payload: 8000 kg ? Permissible total weight: 10500 kg ? German vehicle ? German documents ? Immediately ready for use _____ You can also receive the description in another language by email. ? Our service: ? ? - Export declaration, customs registration, yellow temporary license plates, red customs license plates. ? - Purchase of your used construction machinery or commercial vehicle. ? - We assist you with financing. ? - We offer you transport solutions. ? - Inspection and demonstration of the machines from Monday to Friday, 9:00 AM to 5:00 PM (Saturday only by appointment). ? ? Our pool of machines is constantly changing and is always up-to-date on our website. ? ? We are also available by telephone. ? ? Sanisa GmbH ? Otto Hahn Straße 13 ? 35510 Butzbach ? ? Tel: ? Mobile: Nwjdjz Dc Uajpfx Adhsl ? This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: used, maximum load weight: 509 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 02/2026, loading space length: 2,950 mm, loading space width: 1,600 mm, loading space height: 120 mm, total width: 2,240 mm, total height: 830 mm, A3 GW26H415160 Njdpfx Adoym Ih Iehewl Multitransporter 3016, manufactured by TEMARED, type DMC, Total weight: 750 kg, 295x160cm, with inertia braking system, 100 km/h (optional), with foldable access ramp (optional), low-loader, height-adjustable. Errors and prior sale excepted.

Condition: used, maximum load weight: 10 kg, overall weight: 10,000 kg, maximum speed: 25 km/h, Year of construction: 2000, operation weight: 10,000 kg, Equipment: lighting, Tandem axle, permissible total weight 10,000 kg, storage location: customer. Nwodpfx Adjz Edzdshsl

Condition: used, maximum load weight: 31,880 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 02/2015, Year of construction: 2015, Schwarzmüller 4-axle, galvanized low-loader trailer with hydraulic ramps, extendable to 3m, with excavator bucket. Condition: good for its age. Tires: 60-80% tread remaining. Nwodez D Rl Hopfx Adhsl ----Technical Specifications: General: ? Brief description: 4-axle low-loader with hydraulic ramps, extendable, galvanized. Cab: ? Refrigerator: No. Engine: ? AdBlue: Yes. Transmission: ? Retarder: No. Chassis: ? Aluminum rims: No. ? Lift axle: No. ? Steering axle: No. Fifth wheel coupling: ? Disabled driver’s fifth wheel pin: No. Documents: ? Unladen weight: 8,120 kg.

Condition: used, maximum load weight: 31,880 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 02/2015, Schwarzmülle 4-axle, galvanized low-bed trailer with hydraulic ramps, extendable to 3 m, excavator bucket. Condition: good for its age. Tires: 60-80%. Technical specifications: General: * Brief description: 4-axle low-bed trailer with hydraulic ramps, extendable, galvanized. Cab: * Refrigerator: No Engine: * AdBlue: Yes Transmission: * Retarder: No Chassis: * Aluminum rims: No * Lifting axle: No Nwjdpfez Dzi Aox Adhjl * Steering axle: No Fifth wheel coupling: * Disabled person's fifth wheel pin: No Documents: * Unladen weight: 8,120 kg

Condition: new, functionality: fully functional, empty load weight: 662 kg, maximum load weight: 2,838 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,500 mm, loading space width: 1,820 mm, tire size: 195/50R16C 104/101N, Year of construction: 2025, For sale is a new braked 2-axle trailer/construction machinery low-loader from Martz, type 4, with a permissible total weight of 3,500 kg! The trailer features a phenolic resin-coated plywood floor with lashing eyes and a bucket resting area. With a payload of 2,838 kg, this trailer is ideally suited for transporting construction and landscaping machinery. The stated price includes 19% VAT! The trailer is available immediately! Overall trailer dimensions (L/W/H): 5,514 x 2,420 x 1,820 mm Technical specifications: - Loading area dimensions: 3,500 x 1,820 mm - Permissible total weight: 3,500 kg - Unladen weight: 662 kg - Payload: 2,838 kg - KNOTT overrun device - Axles with KNOTT braking system - LED marker lights - LED contour lights - Rear lights - Galvanized drive-on ramp with support bar Njdpsw Tdukjfx Adhjwl - Bucket storage platform - Phenolic resin-coated plywood floor including lashing eyes for securing loads - Axle load per axle 1/2: 1,800/1,800 kg - Shock absorbers on the axles for an optional top speed of 100 km/h - Tires: 195/50R16C 104/101N - Automatic jockey wheel - Support load: 250 kg - V-drawbar All information is subject to change. Errors and modifications excepted.

Condition: used, functionality: fully functional, empty load weight: 3,600 kg, maximum load weight: 9,900 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 11/2011, next inspection (TÜV): 09/2027, loading space length: 6,100 mm, loading space width: 2,550 mm, suspension: air, tire size: 205/65 R 17,5, color: grey, trailer brake: trailer braked, Year of construction: 2011, Equipment: ABS, New German vehicle inspection certificate (TÜV) Müller Mitteltal tandem low-bed trailer with hydraulic ramps Type: ETUE-TA 13.5 NG Nwsdpfxez D T N Ij Adhel GVW: 13,500 kg Unladen weight: 3,600 kg Payload: 9,900 kg Air suspension, twin tires 205/65 R 17.5 40 mm fifth wheel coupling 88 cm loading height

Condition: used, maximum load weight: 1,950 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,000 mm, loading space width: 2,010 mm, loading space height: 115 mm, total width: 2,540 mm, total height: 500 mm, A25 GW26NG000031 Nwjdpfx Aeyn Ucbedhel Car transport trailer, manufacturer STEMA, type FTAK 27-40-21.2, Gross weight: 2,700 kg, with overrun brake, WAP901 hand winch, low loader, hydraulically tiltable. Main frame: Extremely sturdy and torsion-resistant with crash-tested safety V-drawbar. Tiltable, robust frame construction with safety locks. All frame parts are hot-dip galvanized for corrosion resistance. Running rails: Extra wide, perforated, non-slip running rails made of galvanized sheet with large elongated holes for secure fixing of tie-down straps. The extra-wide track allows easy transport of vehicles with different wheelbases. Integrated drive-on ramps facilitate easy loading and unloading. Side panels: Signal red powder-coated (corrosion-free and scratch-resistant) for enhanced safety. Vehicle not reconditioned ...and much more. Errors and prior sale reserved.

Condition: new, maximum load weight: 2,711 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 4,000 mm, loading space width: 1,820 mm, loading space height: 250 mm, Saris Magnum S MG 400 182 3500 3 V Construction Machinery Trailer Tridem New robust Saris triple-axle excavator and machinery transport trailer with low loading height and premium running gear. Large version with a 4-meter loading area! Loading area dimensions: 400 x 182 x 30 cm (LxWxH) Gross vehicle weight: 3,500 kg Axles: 3 Nwedpfjyqhncsx Adhjl * Fully welded and hot-dip galvanized frame * Including front bucket rest * Heavy-duty solid steel rear ramp (140 cm) * Durable, waterproof wooden floor * 8 heavy-duty lashing rings on the platform * Heavy-duty jockey wheel * Reinforced, walkable mudguards * Price includes vehicle documents! We do not have fixed opening hours and instead offer flexible appointments by arrangement. This way, we can fully focus on your needs and provide personal consultation and smooth transactions. Please note: Trailer, accessory, and construction component prices may vary due to freight/material surcharges. Please inquire about availability and final prices. For home transport within Germany, we are happy to provide a transfer license plate for 25 euros. TÖFFI Anhänger in Zell – Always a large selection of new car trailers by Humbaur, Saris, Böckmann, Stema, Pongratz, TPV, and WM-Meyer available immediately or at short notice. Also available for online order. Subject to prior sale and errors.

Condition: used, maximum load weight: 4,880 kg, overall weight: 6,500 kg, axle configuration: 2 axles, first registration: 02/2000, loading space length: 4,580 mm, loading space width: 1,890 mm, total width: 2,870 mm, Blomenröhr low loader, type 552/6500, in standard version with loading ramps, rear supports, air brake system, front storage box, new TÜV, in good and ready-to-use condition. Nwodpfxsxtcl Hj Adhjl

Condition: used, functionality: fully functional, machine/vehicle number: XPGW2T03522033132, empty load weight: 805 kg, maximum load weight: 2,695 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 11/2022, next inspection (TÜV): 12/2026, loading space length: 4,580 mm, loading space width: 1,800 mm, suspension: air, tire size: 195/50 R 13 C, color: grey, our vehicle number #31018 tire size 195/50 R 13 C body dimensions (L x W): 4,580 mm x 1,800 mm Njdoz Ahazopfx Adhewl color: gray air suspension electric wheel chocks 18 mm non-slip plywood flooring electric air suspension system electropneumatic leveling system drum brake tie-down points on the outside of the frame Financing available upon request!!!

Condition: used, maximum load weight: 10,280 kg, overall weight: 14,000 kg, axle configuration: 2 axles, first registration: 10/2019, loading space length: 5,600 mm, loading space width: 2,450 mm, loading space height: 400 mm, Equipment: ABS, Blomenroehr Tandem, two-sided tipper with ramps First registration: 10/2019 Nsdpfx Adezt T Sdshjwl * Gross vehicle weight: 14,000 kg, unladen weight: 3,720 kg, payload: 10,280 kg * ABS / EBS * Gigant axles * Tires: 215/75R17.5, dual tires (11 / 11mm - 9 / 10mm, 4 / 4mm - 3 / 4mm) * Loading area: 5.60m x 2.45m (sideboards: 40cm) * Loading height: approx. 90cm * 3 pairs of lashing eyes on the sides in the floor, 2 additional lashing eyes at the front on the end wall * Steel floor * Height-adjustable drawbar with 40mm drawbar eye * 1x stainless steel storage box * 2 LED reversing lights * Ramps with grating, laterally movable * 2x mechanical support at the rear * New TÜV (technical inspection) and emissions test upon sale * Trade-in possible ----Financing available through our partner companies with or without a down payment or residual value, and with various terms. Request an offer from us! ----* Our opening hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside of opening hours, we are available by appointment * We speak German, we speak English, мы говорим по-русски, mowimy po polsku, on parle français