Used Flatbed Open for sale (11,469)

Condition: as good as new (ex-display), maximum load weight: 2,640 kg, overall weight: 3,500 kg, loading space length: 5,020 mm, loading space width: 2,230 mm, loading space height: 300 mm, ANHÄNGERWIRTZ, the online marketplace for purchasing your new trailer, offers high-quality, well-known brands! Over 850 new trailers in stock. Over 130 used trailers constantly available. Non-binding example: Reduced from our stock and only available while supplies last! Tridem flatbed trailer, robust and smooth-running 👍\MEDAX - 3 3500 505X223X30CM TRIDEM 12" LOW CHASSIS 3500KG \High-load trailer MEDAX 3500 502x223x30 cm, 3500kg total weight, tridem axles, low chassis, double ladder frame, hot-dip galvanized, flatbed with anodized aluminum side panels with center rails, recessed, rattle-free tensioning latches, removable corner posts, extendable front and rear side panel supports, extendable lashing eyes, automatic jockey wheel, modern lighting and side marker lights.... Hsdpfx Ajzpht Uskcer Sales available 24/7 through our online shop. Sales via telephone order: MON - FRI 8:00 AM to 12:30 PM & 2:00 PM to 6:00 PM, or 24/7 through our trailershop. Content and images are subject to copyright - logos are trademarked 07/26.

Condition: as good as new (ex-display), maximum load weight: 2,640 kg, overall weight: 3,500 kg, loading space length: 5,020 mm, loading space width: 2,230 mm, loading space height: 300 mm, ANHÄNGERWIRTZ, the online marketplace for purchasing your new trailer, offers top-quality branded products! Over 850 new trailers in stock. Over 130 used trailers constantly available. Non-binding example: From our stock, a robust and smooth-running tri-axle flatbed trailer 👍\MEDAX - 3 3500 505X223X30CM TRIDEM 12" LOW CHASSIS 3500KG High-bed trailer MEDAX 3500 502x223x30 cm, 3500kg gross vehicle weight, tri-axle, low chassis, double ladder frame, hot-dip galvanized, flatbed with anodized aluminum side panels with center stringer, recessed tension locks for rattle-free operation, removable corner posts, extendable front and rear side panel supports, extendable lashing eyes, automatic jockey wheel, modern lighting and side lighting... Sales are available 24/7 via our online store. Sales via telephone order: Mon. - Fri. 8:00 a.m. to 12:30 p.m. & 2:00 p.m. to 6:00 p.m., or 24/7 via our trailershop. Hodpfxezkfw Ho Akcsr Content and images are subject to copyright – logos are trademark protected 07/26.

Condition: new, functionality: fully functional, empty load weight: 902 kg, maximum load weight: 2,598 kg, overall weight: 3,500 kg, loading space length: 5,070 mm, loading space width: 2,100 mm, loading space height: 400 mm, Year of construction: 2026, Scope of delivery: 1x Tiltable car transporter/machine trailer with winch, ramp, and aluminium side walls, 507x210 cm, 3500 kg Description: Our machine transporter/car transporter is the perfect solution for transporting standard vehicles, machinery, and other goods. Thanks to its low loading angle, made possible by the hydraulic system and ramp, more vehicles can be transported effortlessly compared to conventional car transporters. With a loading bed length of 5070 mm and a payload of up to 2598 kg, our trailer is ideal for transporting larger and heavier vehicles and loads. The aluminium side walls also make the trailer perfect for transporting all types of goods. The transport floor is made of anti-slip, water-resistant plywood, providing extra safety. Comfort features are prioritized: The integrated winch, tie-down points, and automatic jockey wheel make handling significantly easier. Technical specifications: - 3 axles - Winch - Tie-down points - Hydraulic system - Automatic jockey wheel - Ramp with shock absorber Hjdpjxv Efuofx Akcsr - Aluminium side walls - Welded, hot-dip galvanized frame Gross weight: 3500 kg Unladen weight: 902 kg Payload: 2598 kg Loading bed length: 5070 mm Loading bed width: 2100 mm Total width: 2210 mm Overall length: 6630 mm Overall height: 940 mm Manufacturer: Martz Trailer type: Car transporter Drawbar type: V-drawbar Floor: anti-slip plywood floor Frame type: Welded Frame material: Steel Intended use: Machinery transport, vehicle transport, heavy load transport, and more.

Condition: new, functionality: fully functional, empty load weight: 902 kg, maximum load weight: 2,598 kg, overall weight: 3,500 kg, loading space length: 5,070 mm, loading space width: 2,100 mm, loading space height: 400 mm, Year of construction: 2026, Scope of delivery: 1x Tiltable car transporter/machine trailer with winch, ramp, and aluminium side walls, 507x210 cm, 3500 kg Description: Hsdpjxm Saajfx Akcsr Our machine transporter/car transporter is the perfect solution for transporting standard vehicles, machinery, and other goods. Thanks to its low loading angle, made possible by the hydraulic system and ramp, more vehicles can be transported effortlessly compared to conventional car transporters. With a loading bed length of 5070 mm and a payload of up to 2598 kg, our trailer is ideal for transporting larger and heavier vehicles and loads. The aluminium side walls also make the trailer perfect for transporting all types of goods. The transport floor is made of anti-slip, water-resistant plywood, providing extra safety. Comfort features are prioritized: The integrated winch, tie-down points, and automatic jockey wheel make handling significantly easier. Technical specifications: - 3 axles - Winch - Tie-down points - Hydraulic system - Automatic jockey wheel - Ramp with shock absorber - Aluminium side walls - Welded, hot-dip galvanized frame Gross weight: 3500 kg Unladen weight: 902 kg Payload: 2598 kg Loading bed length: 5070 mm Loading bed width: 2100 mm Total width: 2210 mm Overall length: 6630 mm Overall height: 940 mm Manufacturer: Martz Trailer type: Car transporter Drawbar type: V-drawbar Floor: anti-slip plywood floor Frame type: Welded Frame material: Steel Intended use: Machinery transport, vehicle transport, heavy load transport, and more.

Condition: used, functionality: fully functional, mileage: 687,000 km, power: 294.2 kW (400.00 HP), first registration: 08/2007, fuel type: diesel, axle configuration: 8x4, wheelbase: 3,800 mm, fuel: diesel, gearing type: mechanical, emission class: euro5, suspension: steel-air, loading space length: 6,800 mm, Year of construction: 2007, Equipment: ABS, retarder, 8x4 Euro 5 Manual transmission Tridem 4th axle is steering axle and lift axle Wheelbase 3.80m Length of loading area: 6.80m Hjderdd Alopfx Akcer Technically in good working order and ready to drive

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,000 kg, maximum load weight: 32,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, *Save on Transport Costs! Up to three platform trailers can be delivered as a space-saving 3-unit stack. Simply assemble the front wall yourself after delivery and benefit from significantly reduced transport costs. *Customized Transport Solution Configure your Fliegl trailer to your exact requirements. The vehicle shown is an example. Production and equipment are tailored individually to customer specifications. #Chassis High-strength steel welded chassis Fifth wheel with replaceable 2" kingpin Angled outer frame with Load-Lock profile for easy strap attachment 24 t two-speed landing gear, single-side operation, semi-round feet with load compensation Approx. 1,930 mm rear swing clearance Rear access ladder Side door retainers 2 wheel chocks with holders Aluminium side underrun protection Galvanized rear underrun protection Hsdpfx Aezmtc Ajkcsr Quarter fenders in front of and behind axle assembly Anti-spray mud flaps (EC compliant) Rear impact protection 2 spare wheel carriers incl. mounting kit 1 spare wheel with steel rim Lockable plastic toolbox #Axles & Suspension BPW disc brake axles (430 mm) Laser-aligned axle and suspension system for reduced tyre wear and fuel consumption Air suspension Automatic lift axle with forced lowering and traction aid (activated by pressing the brake pedal 3 times) #Braking System Dual-line air brake system Colour-coded air lines for easier servicing Spring parking brake 2 interchangeable air couplings at front (without connecting lines) EBS electronic braking system with front EBS socket Raise/lower valve Vehicle Stability System (RSS) Suitable only for tractors equipped with ABS #Tyres 385/65 R22.5 tyres Steel rims, factory silver #Electrical System 24 V lighting system Multi-chamber rear lights LED side marker lights 2 white front position lights 2 red/white rear outline marker lights 2 × 7-pin front sockets (without connecting cables) #Loading Platform Approx. 30 mm phenolic plywood floor 8 longitudinal support beams Forklift axle load up to 7,900 kg Steel chequer plate reinforcement at rear #Front Wall Approx. 1,350 mm aluminium front wall Heavy-duty steel corner posts Front curtain release system Crash Blocker with integrated steel impact protection #Registration & Certificates German registration EC type approval (2007/46/EC) 24/7 service hotline Optional delivery as a secured 3-unit transport stack Fliegl body strength certificate according to EN 12642 XL ECE R70 rear warning plate

Condition: new, machine/vehicle number: GN125, maximum load weight: 460 kg, overall weight: 750 kg, loading space length: 2,630 mm, loading space width: 1,450 mm, loading space height: 400 mm, Year of construction: 2024, High-sided trailer Trailstar Nordica 263, 263x144x30cm, 750kg, tandem axle, V-shaped chassis, platform with galvanized steel side panels, 40cm high, foldable all around, lashing eyes in the chassis frame. Special offer price for showroom models, while supplies last = pick-up price (please inquire about availability). Hodpfx Asi R Nf Tekcsr GN125 04/25

Condition: new, machine/vehicle number: GN125, maximum load weight: 460 kg, overall weight: 750 kg, loading space length: 2,630 mm, loading space width: 1,450 mm, loading space height: 400 mm, Year of construction: 2025, High-loader Trailstar Nordica 263, 263x144x30cm, 750kg, tandem axle high-loader, V-frame, platform with galvanized steel sideboards, 40cm high, foldable all around, lashing eyes in the chassis frame. Special offer price for showroom models, while supplies last = pick-up price (please inquire about availability). Hsdpfxszgupwe Akcer GN125 06/26

Condition: as good as new (ex-display), maximum load weight: 2,640 kg, overall weight: 3,500 kg, loading space length: 5,020 mm, loading space width: 2,230 mm, loading space height: 300 mm, ANHÄNGERWIRTZ, your online pickup market for new trailers, offers top brand-name manufacturers! Hedpfxjzgun He Akcer - Over 850 new trailers in stock - Over 130 used trailers constantly available Non-binding sample offer from stock: Tridem Platform Trailer – robust and smooth-running 👍\MEDAX - 3 3500 505X223X30CM TRIDEM 12" LOW CHASSIS 3500KG\ Flatbed MEDAX 3500 502x223x30 cm, 3500 kg gross weight, low tridem axles, double ladder frame galvanized, bed with anodized aluminum sideboards with center stanchion, latching catches recessed and rattle-free, removable corner stanchions, front and rear sideboard supports extendable, extendable lashing brackets, automatic jockey wheel, modern main and side lighting... Sales around the clock via our online shop at Telephone order acceptance: MON - FRI 08:00 to 12:30 & 14:00 to 18:00 or 24/7 through our trailershop Content and images are protected by copyright – Logos trademarked 11/25

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21801003760, empty load weight: 4,480 kg, maximum load weight: 13,520 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2014, total length: 10,020 mm, total width: 2,550 mm, tire size: 445/45 R19,5", color: grey, Platform Trailer – Specifications Chassis Fine-grain steel welded construction 1-speed landing leg at the front with straight foot and single-side operation on the right-hand side Wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Half fenders extending slightly beyond the main frame Rear impact buffers Drawbar Tandem trailer drawbar with certified 50 mm towing eye Transport version with under-mounted coupling drawbar Axles & Suspension BPW disc brake axles (manufacturer's choice) Air suspension with raise/lower valve Wheels & Tyres 445/45 R19.5 tyres (manufacturer's choice) Steel wheels, factory silver finish Braking System Dual-line air brake system Spring parking brake Front Duomatic connection with connecting line to the towing vehicle Haldex Electronic Braking System (EBS) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality Loading Platform Platform length: approx. 7,300 mm Phenolic plywood floor Front Wall Aluminium front wall, approx. 1,200 mm high Heavy-duty steel corner posts (volume design) Electrical System 24 V electrical system Hjdpfx Aksni Udzocor Multi-chamber lights Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights 1 × 15-pin front connector with connecting cable Registration & Certification Country of registration: Germany DEKRA inspection and certification 24/7 service hotline Prepared for single-line licence plate holder ECE R48 contour markings with white reflective strips on the sides and red reflective strips at the rear

Condition: excellent (used), functionality: fully functional, machine/vehicle number: WMAN08ZZ5FY326511, mileage: 120,200 km, power: 213 kW (289.60 HP), first registration: 04/2015, fuel type: diesel, empty load weight: 15,500 kg, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, color: yellow, gearing type: mechanical, emission class: euro6, suspension: steel-air, number of seats: 2, Year of construction: 2015, operating hours: 5,545 h, lifting height: 44,000 mm, mast type: telescopic, Equipment: ABS, UVV, additional headlights, air conditioning, crane, cruise control, differential lock, onboard computer, LOCATION: 73230 Kirchheim unter Teck -- Böcker AK 44 / 400 on MAN TGM 18.290 4x2 BL First registration: 03/01/2015 VIN: WMAN08ZZ5FY326511 German registration documents + TÜV (German technical inspection) -- CHASSIS MAN TGM 18.290 4x2 BL Weight variant: 8,000 kg / 11,500 kg Front axle: steel-sprung, AL 8 t Rear axle: air-sprung, AL 11.6 t, differential lock Hsdpfxezlhttj Akcor Suspension: Two ride heights for air suspension Engine: MAN 6-cylinder diesel, 213 kW (290 hp) / exhaust emissions in accordance with EURO 6 Transmission: TIPMATIC 12-speed manual transmission with reduction gear Retarder: Intarder, engine brake Tires: Front axle 315/55 R22.5 | Rear axle 1 + 2 - 315/80 R22.5 Cab: C, short cab, driver's comfort suspension seat -- BÖCKER SUPERSTRUCTURE CRANE OPERATION - Boom length 44.00 m max. (with 2 m mechanical extension) - 500 kg lifting capacity / 28.00 m - 1000 kg lifting capacity / 21.00 m - 2000 kg lifting capacity / 14.00 m - 4000 kg lifting capacity / 8.20 m - WORK PLATFORM - Working height max. 41.5 m - Slewing range approx. 620 degrees - 100 kg / 33 m - 250 kg / 30 m - OTHER Radio remote control Work platform optional -- Further equipment features available on request. -- Vehicle from 1st owner - very good condition - immediately available from stock in D-73230 Kirchheim unter Teck.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: WMAN08ZZ8FY326356, mileage: 120,200 km, power: 213 kW (289.60 HP), first registration: 03/2015, fuel type: diesel, empty load weight: 15,500 kg, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, color: yellow, gearing type: mechanical, emission class: euro6, suspension: steel-air, number of seats: 2, Year of construction: 2015, operating hours: 6,590 h, lifting height: 44,000 mm, mast type: telescopic, Equipment: ABS, UVV, additional headlights, air conditioning, crane, cruise control, differential lock, onboard computer, LOCATION: 73230 Kirchheim unter Teck -- Böcker AK 44 / 400 mounted on MAN TGM 18.290 4x2 BL First registration: 01.03.2015 VIN: WMAN08ZZ8FY326356 German registration documents + TÜV (German technical inspection) -- CHASSIS MAN TGM 18.290 4x2 BL Weight variant: 8,000 kg / 11,500 kg Front axle: steel-sprung, AL 8 t Rear axle: air-sprung, AL 11.6 t, differential lock Suspension: Two ride heights for air suspension Engine: MAN 6-cylinder diesel, 213 kW (290 hp) / exhaust emissions compliant with EURO 6 Transmission: TIPMATIC 12-speed manual gearbox with reduction gear Retarder: Intarder, engine brake Tires: Front axle tires 315/55 R22.5 | Rear axle 1 + 2 - tires 315/80 R22.5 Cab: C, short cab, driver's comfort suspension seat -- BÖCKER SUPERSTRUCTURE CRANE OPERATION - Boom length 44.00 m max. (with 2 m mechanical extension) - 500 kg lifting capacity / 28.00 m - 1000 kg lifting capacity / 21.00 m - 2000 kg lifting capacity / 14.00 m - 4000 kg lifting capacity / 8.20 m Hsdezlhpbepfx Akcer - LIFTING PLATFORM - Working height max. 41.5 m - Slewing range approx. 620 degrees - 100 kg / 33 m - 250 kg / 30 m - OTHER Radio remote control Work basket optional -- Further equipment features available on request. -- Vehicle from first owner - very good condition - immediately available from stock at D-73230 Kirchheim unter Teck.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: WMAN08ZZ8FY326339, mileage: 101,700 km, power: 213 kW (289.60 HP), first registration: 03/2015, fuel type: diesel, empty load weight: 15,500 kg, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, color: yellow, gearing type: mechanical, emission class: euro6, suspension: steel-air, number of seats: 2, Year of construction: 2015, operating hours: 5,770 h, lifting height: 44,000 mm, mast type: telescopic, Equipment: ABS, UVV, additional headlights, air conditioning, crane, cruise control, differential lock, onboard computer, LOCATION: 73230 Kirchheim unter Teck -- Böcker AK 44 / 400 on MAN TGM 18.290 4x2 BL First registration: 03/01/2025 VIN: WMAN08ZZ8FY326339 German registration documents + TÜV (German technical inspection) -- CHASSIS MAN TGM 18.290 4x2 BL Weight variant: 8,000 kg / 11,500 kg Front axle: steel-sprung, AL 8 t Rear axle: air-sprung, AL 11.6 t, differential lock Suspension: Two ride heights for air suspension Engine: MAN 6-cylinder diesel, 213 kW (290 hp) / exhaust emissions compliant with EURO 6 Transmission: TIPMATIC 12-speed manual gearbox with reduction gear Retarder: Intarder, engine brake Tires: Front axle tires 315/55 R22.5 | Rear axle 1 + 2 - tires 315/80 R22.5 Cab: C, short cab, driver's comfort suspension seat -- BÖCKER SUPERSTRUCTURE CRANE OPERATION - Boom length 44.00 m max. (with 2 m mechanical extension) - 500 kg lifting capacity / 28.00 m - 1000 kg lifting capacity / 21.00 m - 2000 kg lifting capacity / 14.00 m Hodpswmxhtofx Akcsr - 4000 kg lifting capacity / 8.20 m - LIFTING PLATFORM - Working height max. 41.5 m - Swivel range approx. 620 degrees - 100 kg / 33 m - 250 kg / 30 m - OTHER Radio remote control Work platform optional -- Further equipment features on request. -- Vehicle from first owner - very good condition - immediately available from stock in D-73230 Kirchheim unter Teck.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22701003408, empty load weight: 4,800 kg, maximum load weight: 22,200 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 01/2015, next inspection (TÜV): 02/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Please note: The images shown are archive photos. The vehicle may still be in operation at the time of inquiry. # 2-Axle Fliegl Mega Platform Semi-Trailer ## Weights & Dimensions * Gross Vehicle Weight (GVW): 27,000 kg * Payload (approx.): 22,200 kg * Axle load: 16,000 kg * Kingpin load: 11,000 kg * Unladen weight (approx.): 4,800 kg (± manufacturing tolerance) * Overall length: approx. 13,850 mm * Overall width: max. 2,550 mm * Overall height: approx. 2,245 mm * Platform length: approx. 13,650 mm * Platform width: approx. 2,480 mm * Fifth wheel height: approx. 950 mm * Kingpin setting: approx. 1,680 mm * Front corner radius: approx. 2,040 mm --- ## Chassis – Mega Platform Semi-Trailer * High-tensile fine-grain steel welded chassis construction * Fifth wheel plate with replaceable 2" king pin * 13 pairs of recessed lashing rings integrated into the outer frame, each rated at 2.5 tonnes * Outer frame with integrated Load-Lock profile for quick attachment of lashing straps * 24-tonne two-speed landing gear, single-side operation, straight foot design, without thrust compensation * Wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Quarter mudguards --- ## Axles & Suspension * 1st axle: SAF drum brake axle * 2nd axle: BPW drum brake axle * Air suspension --- ## Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Two non-interchangeable coupling heads at the front (without connecting hoses) * EBS (Electronic Braking System) with front EBS socket, without connecting cable * Integrated raise-and-lower valve * Vehicle Stability Control System Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. --- ## Wheels & Tyres * 385/55 R19.5 tyres (manufacturer's choice) * Steel rims, factory silver finish --- ## Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights, recessed as far as possible for maximum protection * 2 white front position lights * 2 white/red rear outline marker lights * 2 × 7-pin front sockets, without connecting cables --- ## Platform * Approx. 30 mm phenolic-coated plywood floor * Omega-reinforced cross joints * Longitudinal subframe supports for high point-load capacity * Suitable for forklift axle loads up to 7,100 kg Note: Minor floor distortion due to weather conditions is possible. --- ## Front Wall * Front wall, approx. 1,200 mm high * Heavy-duty steel corner posts in volume specification * Integrated inspection windows --- ## Registration & Compliance Hsdpsy Sk U Asfx Akcjr * Registration country: Germany * DEKRA inspection and certification included * 24/7 service hotline * Prepared for single-line licence plate holder * Rear warning plate according to ECE R70 * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) --- ## Paint Finish * Chassis: RAL 3002 Carmine Red * Landing gear: black coated * Front wall: RAL 3002 Carmine Red --- Please note: The images shown are archive photos. The vehicle may still be in operation at the time of inquiry.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,000 kg, maximum load weight: 22,000 kg, overall weight: 29,000 kg, axle configuration: 2 axles, loading space length: 7,500 mm, loading space width: 2,170 mm, total length: 11,700 mm, total width: 2,550 mm, total height: 2,650 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further Information Chassis Fine-grain steel welded construction, drawbar plate with interchangeable 2 kingpin, with 2 kingpin positions Outer frame slightly angled with load-lock profile for lashing straps 2 pairs of lashing eyes embedded in the outer frame on the gooseneck, 5 tons each 8 pairs of lashing eyes embedded in the outer frame in the well, 5 tons each 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation 2 outrigger wedges with holder Hedpfoi Ri Hvsx Akcor Aluminum side underrun protection Steel rear underrun protection Quarter-shell fenders in front of and behind the axle assembly 2 storage boxes made of stainless steel, w=600/h=400/d=500 mm, with polished, lockable door 2 pairs of pole pockets embedded in the outer frame on the gooseneck, internal dimension 70 x 40 mm 6 pairs of pole pockets embedded in the outer frame in the well, 70 x 40 mm Internal dimensions!! Internal width between the poles 2420 mm!! 3 lashing/pole strips in the well, transverse embedded in the floor over the entire width up to the outer frame, approx. 100 mm high. With 20 mm round steel strips, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). At the bottom with an angle plate as a cover, half open downwards. For lashing and inserting poles 80 x 80 mm. Pieces of insertable poles W=80/ D=50/ L=1200 mm, hot-dip galvanized Pieces of insertable poles W=80/ D=80/ L=1200 mm, hot-dip galvanized Rear extension, mechanical, with hand crank, extendable by approx. 1500 mm, lockable every 500 mm, with support beam, at the center of gravity at approx. 500 mm, loadable with 2000 kg over the entire width, at 1000 mm with 1000 kg over the entire width and at 1500 mm with 500 kg over the entire width, including underrun protection with lighting, extendable. 2 pairs of insertable poles W=80/ D=80/ L=1200 mm, hot-dip galvanized Storage compartment for insertable poles, open, on the front panel or below the loading area (for 10 insertable poles 80 x 50 x 1200 mm and 4 insertable poles 80 x 80 x 1200 mm) Axles & Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Last axle with steering knuckle, with automatic reversing lock via reversing light and additional locking function on the vehicle via a button. Air suspension with raise/lower valve Wheels & Tires 235 / 75 R 17.5 according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load recognition via EBS-Canbus signal, for display on the display in the driver's cab, truck must be appropriately prepared, no factory installation. Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via the reversing light 1 LED rotating beacon with holder, swit

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,000 kg, maximum load weight: 29,000 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,800 mm, total width: 2,550 mm, tire size: 385/65 r22.5, tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further Information Chassis Fine-grain steel welded construction, drawbar with interchangeable 2 kingpin Vario stake system 4 pairs recessed in the loading area, can be pushed together to 2,100 mm and extended to approx. 3,500 mm for loading. Stakes can be locked every 100 mm on an inner width of 2,100 mm to 3,000 mm, 4 pairs of divisible stakes 600 mm + 1,200 mm, total height 1,800 mm removable. With a stake inner width of approx. 2,350 mm or more, there is an overwidth. Hodpfx Asi Ri R Dskcsr Vario end walls Floor prepared for attaching 3 end walls. 4 x 5 pairs of Vario stake pockets for attachable end walls and 1 x 3 pairs in the middle for transporting construction steel mats of 2 x 5,000 mm or 2 x 6,000 mm. 2 Vario end walls, each consisting of 1 pair of plug-in stakes and 1 crossbar at the top, approx. 2,200 mm wide. Crossbar can be extended by 220 mm on both sides, with lashing eye for securing. Height of Vario end wall approx. 1,900 mm, can be converted to a height of 1,300 mm or 700 mm. 4 stake pockets recessed in the middle of the floor for 80 x 80 mm plug-in stakes 1 pair of supports at the bottom for Vario end wall at the front 1 pair of supports at the bottom for Vario end wall at the rear Outer frame slightly angled with Load-Lock profile for attaching lashing straps 14 pairs of lashing eyes additionally recessed in the outer frame, each 5 tons 24 tons, 2-speed winch, single-side operation, with straight lower part, without stroke compensation Extension ladder at the rear Aluminum side impact protection Steel underrun protection, galvanized Quarter fender in front of and behind the axle assembly with anti-splash flaps only on the last axle Rear impact protection 8 steel winches with wire rope and swivel hook, 4 on the left and 4 on the right with rope guide through the outer frame, 1 removable attachment gearbox for steel winch - supplied loose Spare wheel holder for 1 wheel, with wheel fastening kit 1 plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock. 1 closed stake storage box, open at the top, under the loading area, doors on both sides, w=450 mm/H=400/420 mm/d=2460 mm 4 lashing/stake rails crosswise recessed in the floor across the entire width up to the outer frame (max. usable inner width between the outer plug-in stakes approx. 2170 mm), approx. 100 mm high. With 20 mm round steel strips, at the top and bottom, distance from top to bottom approx. 60 mm. At the bottom with an angle plate as a closure, half open downwards. For lashing and inserting 80 x 80 mm stakes. Wrap-around Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured, reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start assist, operated 3x brakes (start assist is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended driving height, therefore no guarantee for tire damage Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,350 kg, maximum load weight: 28,650 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 435/50 r19,5, tire condition: 100 %, Additional Information Chassis, Semi-trailer, Transport Company Fine-grained steel welded construction, kingpin plate with 2 replaceable kingpins Attachment rail for aluminum ramps across the entire width Reinforced frame for vehicle loading Outer frame with Load-Lock profile approximately every 400 mm for securing lashing straps 10 pairs of lashing eyes recessed in the outer frame, each rated at 10 tons 24-ton, 2-speed support winch, single-sided operation, with semi-circular lower part and straight connecting plate, with extension compensation Foldable rear support 2 chock blocks with holder Aluminum side underrun protection Galvanized steel underrun protection Quarter panel fenders in front of the 1st axle and behind each axle with anti-spray flaps behind each axle Pair of ferry eyes, yellow marked 1 spare wheel holder for 1 spare wheel, with wheel fastening kit 2 plastic toolboxes, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) Hsdpfx Akold Ihljcor Container locking system, 4 pairs of locks recessed in the floor for 2 x 20 ft or 1 x 40 ft containers 10 pairs of lashing pockets recessed in the outer frame, internal dimensions 70 x 40 mm 10 lashing pockets recessed in the center of the floor, internal dimensions 70 x 40 mm 2 lashing/lashing bar rails recessed transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer lashing bars approx. 2170 mm), approx. 100 mm high. With 20 mm round steel rails, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). Bottom with an angle plate as a closure, open halfway downwards. For lashing and inserting lashing bars 80 x 80: Position 2 and 4 according to Fliegl data sheet 20 lashing bars, hot-dip galvanized Note: The lashing pockets / insertion pockets are not designed for the sole securing of long materials, pipes, etc. without wrapping. Storage space for aluminum access ramps, ramps can be slid in from the rear 3 pairs of folding eyes, 10 tons, in the outer frame (1x in front of the front wall and 2x in the rear area). Axles + Suspension SAF disc brake axles Axle / chassis laser-measured, reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, actuated by 3x brake (start-up assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended ride height, therefore no guarantee for tire damage 2 ride heights, adjustable via hand knob, 1 x for saddle height 980 mm, 1 x for saddle height 1100 mm (Note! Vehicle with tilt) Braking System 2-line pneumatic braking system Color-coded line routing for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The semi-trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve 2 ride heights, adjustable via hand knob, 1 x for saddle height 980 mm, 1 x for saddle height 1100 mm (Note! Observe overall height, exceeding height is at the customer's risk) Ride height in connection with lift axle, with the lift axle raised, the loading or overall height increases by 50 mm (with Mega Flex only at the lower ride height or saddle height) Vehicle - Driving stability system Wheels and tires 435/50 R19.5, manuf

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,860 kg, maximum load weight: 23,140 kg, overall weight: 28,000 kg, axle configuration: 2 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 800 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,538 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, # Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. --- ## Chassis – 2-Axle Jumbo Platform Semi-Trailer * High-tensile fine-grain steel welded chassis construction * Fifth wheel plate with replaceable 2" king pin * New slightly inclined outer frame with integrated Load-Lock profile for securing lashing straps * 24-tonne two-speed landing gear, single-side operation, straight foot design, without thrust compensation * Free landing leg corner dimension / rear swing clearance approx. 1,920 mm * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Quarter mudguards in front of and behind each axle * Spare wheel carrier for one spare wheel, including wheel mounting kit * Lockable plastic toolbox with shelf insert, dimensions: 620 × 360 × 440 mm (W × H × D), padlock not included --- ## Axles & Suspension * Drum brake axles (manufacturer's choice) * Laser-aligned axles and running gear for reduced tyre wear and improved fuel efficiency * Air suspension --- ## Braking System * Dual-line compressed air braking system * Colour-coded air lines for simplified maintenance * Spring-loaded parking brake * Front Duomatic coupling without connecting hoses * EBS (Electronic Braking System) with front EBS socket, without connecting cable * Integrated raise-and-lower valve * Vehicle Stability Control System Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. --- ## Wheels & Tyres * 235/75 R17.5 tyres (manufacturer's choice) * Steel rims, factory silver finish --- ## Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 1 × 15-pin front socket without connecting cable --- ## Platform * Approx. 30 mm phenolic-coated plywood floor * High point-load capacity, suitable for forklift axle loads up to 5,600 kg --- Hodjkv Uvzepfx Akcjr ## Front Wall * Front wall made of 25 mm aluminium hollow profiles, approx. 1,350 mm high * Heavy-duty steel corner posts in volume specification --- ## Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) --- ## Finish * Chassis: hot-dip galvanised or painted according to customer requirements * Aluminium front wall --- # Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,860 kg, maximum load weight: 28,140 kg, overall weight: 35,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235/75 17,5, tire condition: 100 %, Additional information Chassis Fine-grained steel welded construction, kingpin plate with 2 replaceable kingpins Recessed rail for loading ramps on the rear extension over the entire width, outer edge beveled to prevent damage. Reinforced frame for vehicle loading Outer frame with load-lock profile approx. every 400 mm for securing lashing straps 10 pairs of lashing eyes recessed on the top/outside of the outer frame, each 10 tons, starting after the neck area 24-ton, 2-speed support jacks, single-sided operation, with a flat mounting plate 2 wheel chocks with holder Aluminum side impact protection Galvanized steel underride protection Sheet metal as a splash guard riveted to the bottom, in the neck area above the center of the bogie axle and above the axle assembly Semi-elliptical fenders with anti-spray flaps according to EC Hodpfelf Dtmsx Akcer Container locking system, 4 pairs of locking recesses recessed in the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters (additional cross supports required at the front and rear of the container; the container must rest evenly across its width in conjunction with the locks; cross supports are not included) Attention! Damage to the platform floor is possible due to the cross supports! Rear extension, mechanical, with hand crank, extendable by approx. 1500 mm, lockable every 500 mm, including extendable underride protection with lighting (then the rear ladder is omitted) Covered with platform in the wheel arch area, with steel diamond plate in the center. Attention! Ramp loading at the rear is only possible with the rear extension in the retracted position! Storage space for loading ramps integrated in the rear extension, only usable when the rear extension is extended 1000 mm – then there is an overhang For transporting the ramps with the rear extension retracted, there is storage space for the ramps on the right side of the frame in front of the axles 1 pair of ramps, 3000 mm long, 300 mm wide, load capacity per pair 6000 kg (recessed rail for ramps on the rear extension) Rear slope to approx. 500 mm Electric winch, 24 volts, pulling force approx. 8165 kg, mounted in the center at the front, operated with a wireless remote control, cable length 35 m x approx. 10 mm, with a cable guide and removable guide rollers Axles + Suspension Drum brake axles Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance functions up to an axle load exceedance of 30% and a speed of max. 25 km/h) with central lift arm Axle lift below the recommended ride height, therefore no guarantee for tire damage Braking system 2-line pneumatic braking system Color-coded lines for easy service. Spring parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be pulled by towing vehicles which guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Wheels and tires 235/75 17.5, manufacturer's choice Steel rims in twin arrangement, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 additional LED work lights at the rear, switched via the revers

Condition: new, machine/vehicle number: AHW SO GN242, overall weight: 2,000 kg, loading space length: 4,200 mm, loading space width: 2,150 mm, loading space height: 400 mm, Year of construction: 2024, Order your new trailer conveniently from ANHÄNGERWIRTZ via our online shop on trailershop. In our online shop, you will find all the necessary information, detailed images, and great offers. Hsdsy S Tc Aspfx Akcer Our warehouse is well-stocked, and your new trailer is ready for you! Stay safe – Team ANHÄNGERWIRTZ, 05.26 GN242

Condition: new, functionality: fully functional, empty load weight: 369 kg, maximum load weight: 971 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,900 mm, loading space width: 1,700 mm, loading space height: 300 mm, tire size: 185/60R12C, trailer brake: trailer braked, Year of construction: 2023, Flatbed trailer with aluminum side walls - 1.35 t. ► ► Warehouse clearance, single unit at a bargain price! ► Single-axle, braked ► Internal dimensions: 290 x 170 x 30 cm (L x W x H) ► Permissible total weight: 1350 kg ► Payload: 971 kg ► Sieve-printed floor panel ► Tires: 185/60R12C ► Recessed lashing eyes ► Aluminum side walls Single unit at a special price, new vehicle, not yet registered. Year of manufacture: 2023 Hodpfx Aovx T Dnskcor Request a non-binding quote for the best price for your desired configuration! The photos show a similar trailer with additional features! Despite careful review, errors in the description and price cannot be ruled out. Therefore, the prices, dimensions, weights, and descriptions are not binding.

Condition: new, functionality: fully functional, empty load weight: 700 kg, maximum load weight: 2,800 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,660 mm, loading space width: 1,980 mm, loading space height: 360 mm, suspension: parabolic leaf (spring), tire size: 195/60R12C, trailer brake: trailer braked, Year of construction: 2024, IFOR WILLIAMS - LM126 ► ► Demo model 12/2024 at a special price ► New vehicle, unregistered ► Flatbed trailer / high-loader ► Loading area: 3.66 x 1.98 x 0.36 m (LxWxH) ► Gross vehicle weight: 3,500 kg ► Unladen weight approx.: 700 kg ► Payload approx.: 2,800 kg ► Full-size spare wheel ► Premium jockey wheel 500 kg ►► The trailer is equipped with the following extras: ► Deck with aluminium chequer plate ► Drop sides made of galvanized steel sheet ► Front rack ► 8 recessed lashing rings in the floor Optional extras: ► Loading ramps (steel or aluminium) ► Rear support stands If you are looking for a truly solid and extremely robust trailer, the LM126 from Ifor Williams is the right choice. A welded and hot-dip galvanized chassis, combined with solid axles and parabolic leaf springs, ensures a strong trailer. Ifor Williams high-loaders are particularly appreciated by our commercial customers who value stability, versatility, and a long service life. Request a non-binding quote for your preferred configuration! Hodpfexdtc Rox Akcer The pictures show a corresponding trailer with optional extras! Despite careful review, errors in description and pricing cannot be completely excluded. Therefore, all prices, dimensions, weights, and descriptions are non-binding.

Condition: used, functionality: fully functional, empty load weight: 550 kg, maximum load weight: 1,450 kg, overall weight: 2,000 kg, first registration: 05/1992, loading space length: 3,970 mm, loading space width: 1,960 mm, loading space height: 400 mm, Year of construction: 1992, Open box trailer: + Buhl + Type: VA 2000-400AP + First registration: 27.05.1992 + Aluminum side walls – can be opened on 3 sides + Internal dimensions: 397cm x 196cm x 40cm + Loading height: 74cm + Tandem axle + Spare wheel + 7-pin plug + Wooden floor + Unladen weight: 550kg; permissible total weight: 2,000kg + Support load: 50kg Hjdpfewu Spyox Akcsr + Overall dimensions: 536cm x 208cm x 114cm (LxWxH) + Trailer from 1st owner Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and omissions excepted; subject to prior sale!

Condition: new, machine/vehicle number: GN125, maximum load weight: 460 kg, overall weight: 750 kg, loading space length: 2,630 mm, loading space width: 1,450 mm, loading space height: 400 mm, Year of construction: 2025, Flatbed trailer Trailstar Nordica 263 263x144x30cm 750kg tandem flatbed, V-chassis, platform with galvanized steel drop-sides 40cm, foldable on all sides, lashing rings in the chassis frame..... .....Promotional price for showroom models while stocks last = pick-up price (Please inquire about availability) Hedpfey I U Ixjx Akcer GN125 05/26

Condition: new, functionality: fully functional, machine/vehicle number: NEW-7, empty load weight: 383 kg, maximum load weight: 1,617 kg, overall weight: 2,000 kg, axle configuration: 1 axle, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS PL 276 150 2000 2 NEW VEHICLE Internal dimensions: 276cm x 150cm Side wall height: 30cm Load platform height: 65cm Gross weight: 2000kg Payload: 1617kg Braked tandem trailer Overrun brake and parking brake by KNOTT 2 axles, each with 1350kg brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side walls with tension latches Side walls fold down and are removable on all sides 15mm thick, non-slip, durable phenolic plywood floor Automatic jockey wheel with 400kg drawbar load 8 noise-dampening lashing rings, each with 800kg tensile strength Reinforced 13" C tyres with steel valve M+S tires Net/rope hooks on the frame 13-pin plug LED front marker lights Rear lamps with reversing light, fog lamp, and triangular reflector OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026: - 100km/h equipment (shock absorbers) - Spare wheel with holder - Without side walls (discounted price) Hedpfsrk It Ssx Akcor - Side wall extension to 35cm - Black Edition (powder-coated side walls and wheels in black) - Loading ramps - Steel plate on floor panel - Full LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Mesh sides in various heights, also closed - Additional 30cm side walls with tension latch - Flat tarpaulin with or without bows - High tarpaulin 160cm or 180cm Other accessories available on request! Plus delivery to Gera and vehicle documents: €200 net Images for illustration only; may show optional extras at extra cost. Haven’t found the right trailer yet? We always have 50–100 vehicles in stock and immediately available for collection. Our workshop is open weekdays from 8:00 to 17:00 for all kinds of repairs. Axle repair specialist, also for caravans. Wide range of rental trailers. Additionally, we offer a large selection of spare parts and accessories for trailers of all brands. Get professional advice by phone, visit our website, or stop by in person.