Used Delmag Drill for sale (631)

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Hnedpfx Asyq Iarsaaok Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2013, Please provide reference number upon request: 22439 Specifications: 2013 model 2548 impact hours 4961 engine hours Vacuum cleaner Tires (see pictures) 37 kW 3100 kg Hedpfoyi Syyjx Aaaenk Remote control Service and maintenance performed by certified personnel Vertical drilling Horizontal drilling Lights Ready for delivery Description: We have a 2013 Sandvik Commando DC125R drill rig for sale. The rig operates as it should, and all service and maintenance have been performed regularly. The rig is well maintained and is in weekly operation, so the hour count will increase slightly. Ready for delivery. Own weight: 3100 Engine hours: 4961 Model: Commando DC125R = More information = Serial number: 113M2285xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2018, Please provide reference number upon request: 20805 Specifications: 2018 model Engine hours: Approx. 3500 Hnsdewvzrgspfx Aaaok Hammer hours: Approx. 19000 Weight: 11,100 kg Chassis (see pictures) Belt width: 25 cm Total width: 220 cm Rod shifter New depth gauge Vacuum cleaner Winch Service history 2 track guides are being replaced before sale Ready for delivery Description:Well maintained Sandvik DINO 400 Drilling Rig.The rig is from 2018 and has had approximately 3500 engine hours.Equipped with rod changer and new depth gauge.Ready for delivery. Own weight: 11100 Model: Dino DC400RI Borerigg = More information = Serial number: 4xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 1989, Please provide reference number upon request: 22933 Hodpfxsy Arx Ro Aaaenk Specifications: Model: 1989 Mounted on wheels Length: approx. 12 meters Works as intended Ready for delivery Description: 1989 UniScreen conveyor belt.Approx. 12 meters long. Ready for delivery. Own weight: 11 Model: transportbånd = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2012, Please provide reference number upon request: 22926 Specifications: 2012 model NQTK wireline Deutz 6 cylinder engine (air-cooled engine) Bean pump Winch Sharebook 2000 Hanix RT1000 dump truck Mitsubishi engine on dump truck Can be supplied with an electric generator for an additional price. Hjdpjy Ahhujfx Aaasnk Ready for delivery   Description: 2012 Sandvik DE130 core drilling rig/diamond drilling rig w/ 2000 Hanix RT1000 dump truck. It is possible to remove the rig from the dump truck. If the owner had work up in the mountains, he could remove the rig and fly it up by helicopter. The engine on the rig has been replaced and they switched to an air-cooled engine. Ready for delivery. Own weight: 1 Model: DE130 Kjerneborerigg/diamantborerigg m/ 2000 Hanix RT1000 dumper = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2002, Please provide reference number upon request: 22928 Specifications: Comes with TT46 pipe The rig only drills 46mm Winch Diesel 2002 Kubota RG30i dump truck Ready for delivery Hjdpfoy Ahhhox Aaajnk   Description: Atlas Copco Diamec 232 diamond drilling rig with 2002 Kubota RG30i dump truck. The rig can only drill 46mm. Ready for delivery. Own weight: 1 Model: Diamec 232 = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2007, Please provide reference number upon request: 22927 Specifications: 2007 model BQTK wireline Air-cooled engine Sharebook 1995 IHI dump truck Left belt newer than right side Can be supplied with an electric generator for an additional price (see pictures) Ready for delivery   Description: 2007 Onram 1000/3 core drilling rig/diamond drilling rig w/ 1995 IHI dump truck. It is possible to remove the rig from the dump truck. If the owner had work up in the mountains, he could remove the rig and fly it up by helicopter. The engine on the rig has been replaced and they switched to an air-cooled engine. Hnedpoy Ahg Refx Aaaek Ready for delivery. Own weight: 1 Model: 1000/3 kjerneborerigg/diamantborerigg m/ 1995 IHI dumper = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2022, Please provide reference number upon request: 22826 Beskrivelse: Vi har en 2022 Hardab 5K6-Dr brønn- og energiborerigg for salg. Riggen har forlenget tårn som gjør at den kan ta stenger opp til 6 meters lengde. Servicer er blitt tatt fortløpende av eier og noe av leverandør. Alt fungerer som det skal. Riggen kan leveres etter avtale. Specifications: 2022 model 2506 hours 55 kW 10500 kg Top winch Rod handling Extended tower Can drill 6-meter lengths 2 batteries for remote control Remote control Hsdeyxk R Rspfx Aaajnk Service performed by the owner and some by professionals Welding machine Lights Delivery by agreement Description: We have a 2022 Hardab 5K6-Dr well and energy drilling rig for sale. The rig features an extended tower that allows it to handle rods up to 6 meters in length. Services have been performed continuously by the owner and some by the supplier. Everything works as it should. The rig can be delivered by agreement. Own weight: 10500 Engine hours: 2506 Model: 5K6-Dr brønn og energi borerigg = More information = Serial number: 1xxxx Please contact ATS Norway for more information

Year of construction: 1996, condition: used, Please provide reference number upon request: 17467 Specifications: Year: 1996 Hours: approx. 9,000 Weight: 11,700 kg Power: 119 kW Dust collector Undercarriage (see pictures) Total width: approx. 225 cm Winch Supplied with 1 rod and 1 drill bit Services carried out by owner Description:1996 Tamrock drilling rig.Ready for delivery.Supplied with one rod and one drill bit. Hours: 8857 Own weight: 11700 Total Weight: 11700 Width: 225 Kw: 119 Model: Dino 500 Borerigg. = More information = Field of application: Construction Hodpsyfz Dtjfx Aaaenk Serial number: 96Axxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2012, Please provide reference number upon request: 21979 Specifications: Model year: 2012 Operating hours: Owner is unsure Double key system Deutz engine Water tank Undercarriage (see photos) Washer Includes drilling equipment, 3 hammers Drilling capacity: 4–10 inch holes Service performed by owner Ready for delivery Hnodpsx Dhadofx Aaaok Own weight: 11 Model: Brønnborerigg = More information = Serial number: 120705xxxx Please contact ATS Norway for more information

Condition: used, mileage: 47,992 km, power: 206 kW (280.08 HP), first registration: 04/2022, fuel type: diesel, tire size: 10R22.5, axle configuration: 4x2, wheelbase: 4,100 mm, fuel: diesel, fuel tank capacity: 130 l, color: white, gearing type: automatic, number of gears: 6, emission class: euro6, suspension: parabolic leaf (spring), total length: 7,650 mm, total width: 2,550 mm, Year of construction: 2021, Equipment: AdBlue, air conditioning, cruise control, seat heater, second fuel tank, = Additional options and accessories = Engine - PTO - PTO Type: Pump - Number of fuel tanks: 1 Interior - Rear view camera - Tachograph: digital - Air-suspended seat Lighting - Headlight type: halogen Superstructure - Hydraulic - Through-loading height = More information = General information Cab: Day Cab Transmission Transmission: 6 AS 1000, 6 gears, Automatic Axle configuration Tyre size: 10R22.5 Brakes: disc brakes Suspension: parabolic suspension Front axle: Tyre profile left: 40%; Tyre profile right: 60%; Reduction: single reduction Rear axle: Tyre profile left: 10%; Tyre profile right: 10%; Reduction: single reduction Weights Empty weight: 10.856 kg Carrying capacity: 2.444 kg GVW: 13.300 kg Maintenance, history and condition APK (MOT): tested until 07/2026 Number of keys: 2 Hnsdpfx Aaeyiutcsajk = Dealer information = Would you like more information about this vehicle? We recommend that you take a look on BAS World. • 3500+ Brand new and used vehicles and machines in stock • Trade-in your current vehicle • Full in-house workshop for inspection, repairs and customisation • Personal advice in your own language • Worldwide delivery and documentation support Want to know more? Visit BAS World online! España (ES) Hablamos 17 idiomas, para que siempre podamos ayudarte en tu propio idioma. No dudes en ponerte en contacto con nosotros directamente. ¡Nuestro empleado español estará encantado de ayudarte! Deutschland (DE) Wir sprechen 17 Sprachen, damit wir dir immer in deiner eigenen Sprache helfen können. Kontaktiere uns gerne direkt. Unser deutscher Mitarbeiter hilft dir gerne! France (FR) Nous parlons 17 langues, afin de pouvoir toujours vous aider dans votre propre langue. N'hésitez pas à nous contacter directement. Notre collaborateur français se fera un plaisir de vous aider ! Portugal (PT) Falamos 17 idiomas, para que possamos sempre ajudá-lo no seu próprio idioma. Não hesite em nos contactar diretamente. O nosso colaborador português terá todo o prazer em ajudá-lo! Italia (IT) Parliamo 17 lingue, per poterti sempre aiutare nella tua lingua. Non esitare a contattarci direttamente. Il nostro collaboratore italiano sarà felice di aiutarti!

Condition: used, Year of construction: 2007, Please provide reference number upon request: 22766 Specifications: 2007 model Hours: about 6,000 Hammer hours: uncertain but owner believes 2,500 2 radio transmitters Central lubrication A hydraulic rod 1838 LE hammer Overhauled hammer 4 years ago Comes with 2 books Ready for delivery in early May     Description: 2007 Atlas Copco ROC D3 radio rig. The hammer was overhauled 4 years ago, but the owner says he hasn't used it much since then. Ready for delivery at the beginning of May. Own weight: 1 Model: ROC D3 radiorigg Hnsdpfx Aajywabioask = More information = Please contact ATS Norway for more information

Year of construction: 2013, operating hours: 8,409 h, condition: used, Ditch Witch JT30. Year: 2013. Operating hours: 8,409. CE certified machine. Cummins QSB 4.5 160 engine. 160 HP / 119 kW. Air conditioning. Enclosed cabin. Wired remote control. Undercarriage: 80%. 57 drill rods, 3 meters each. Hnjdey Dhvuopfx Aaask German machine! ID No.: 157. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations from Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By responding in any manner, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of them. Our prices are export net prices. = Further information = Fuel type: Diesel Year of manufacture: 2013 Intended use: Construction Drive: Tracks Power: 119 kW (162 HP) CE marking: Yes = Company information = For more information: WhatsApp:

Year of construction: 2014, operating hours: 3,475 h, condition: used, Ditch Witch JT9. Year of manufacture: 2014 Hodpfxsy Dhu Rs Aaaonk Operating hours: 3,475 Weight: 3,040 kg CE-certified machine 40 kW Deutz engine 18 drill rods, each 1,900 mm Undercarriage: 80% condition German machine! ID No.: 100 B The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all agreements entered into by Heinhuis, and the preceding negotiations. By responding in any manner, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note thereof. All prices are export net prices. = Further information = Fuel type: Diesel Year of construction: 2014 Application: Construction Drive: Track Engine power: 40 kW (54 hp) Unladen weight: 3,040 kg CE marking: Yes = Company information = For more information: WhatsApp:

Condition: used, Year of construction: 2019, Please provide reference number upon request: 21854 Specifications: Hedpjxypt Defx Aaaonk 2019 model About 7135 hours (will give a little) Stroke hours: 3432 hours Compressor time: 5292 hours Chassis (see pictures) CME grinder Water mist Leica GPS Recently serviced Carousel Vacuum cleaner Rod shifter Automatic drilling Protective cage Winch Air conditioning/ac Radio Remote control Light Ready for delivery   Description: We have a 2019 DX800i drilling rig w/ water mist and Leica GPS for sale. All services and maintenance have been carried out continuously and the rig is in good condition according to the owner. The rig has recently undergone new service. Ready for delivery Engine hours: 7135 = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2019, Please provide reference number upon request: 21113 Specifications: 2019 model Impact hours: 3550 (may increase slightly) Hnsdpfsw Ragkox Aaajk Compressor hours: 5538 (may increase slightly) Engine hours: approx. 8300 (may increase slightly) Winch Rod changer Water mist system Carousel Volvo engine Undercarriage (see photos) Remote control CME grinder L5 GPS Recently serviced Hammer is good. Work lights Thread greasing system Radio Air conditioning Ready for delivery Description: Sandvik DX800i drill rig with L5 GPS for sale.According to the owner, everything is working properly, and the rig was recently serviced.The hammer has been repacked newly.Ready for delivery. = More information = Serial number: 5xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2019, working width: 600 mm, Equipment: lighting, Number of rows: 48, Row/body spacing: 12.5, Area performance: 9900, Loading stage, Hydraulic folding, Hydraulic seed rate adjustment, Pneumatic, Single disc coulters, Track markers, Harrow, Pre-emergence marker, Cereal equipment_____K80 hitch, E-services, Front tyres 700/50-26.5, 2-row disc system, Crosboard bar, Disc coulters, Tyre packer 190/95-15, Harrow, Seeding monitoring, good condition, ready for operation, Location: 17094 Pragsdorf Hedpfxoxtm U Eo Aaasnk

Year of construction: 2009, operating hours: 18,454 h, condition: used, NCB FD 1800 HD DT 18,447 working hours Year of manufacture: 2009 Equipped with Fassi F80A.23 + remote control from 2003 UNDERCARRIAGE Overall Length: 3,210 mm Track Width: 2,350 mm Shoe Width: 500 mm ENGINE DEUTZ Engine Model: TCD 2013 L6 2V Max Power Output: 190 kW Rated Speed: 2,300 rpm Fuel Tank Capacity: 350 l HYDRAULIC SYSTEM Hydraulic Pumps: - 1st Circuit: 80 l/min - 2nd Circuit: 55 l/min - 3rd Circuit: 55 l/min Hydraulic Oil Tank Capacity: 481 l Operating Pressure: 250 bar MAST Mast Length: 8,000 mm Pull-Down Cylinder Force (Push/Pull): 13,000 / 20,000 kgm Pull-Down Stroke: 4,300 mm Max Rod Length: 4,000 mm ROTARY HEAD T3-2000: - Max Torque: 2,045 kgm - Speed Range: 0 – 113 rpm - Number of Hydraulic Motors: 3 - Hydraulic Motor Type: CHAR-LYNN T2-1000: - Max Torque: 1,000 kgm - Speed Range: 0 – 88 rpm - Number of Hydraulic Motors: 2 - Hydraulic Motor Type: DANFOSS WINCH AUXILIARY WINCH Max Pulling Force (1st Layer): 15 kN Rope Diameter: 10 mm CLAMPS CLOSING CLAMP - Clamp Diameter: 350 mm - Clamp Force: 15,300 daN BREAKOUT CLAMP - Clamp Diameter: 350 mm - Clamp Force: 5,500 daN - Breakout Force: 15,300 daN THIRD CLAMP - Clamp Diameter: 350 mm - Clamp Force: 15,300 daN AUXILIARY SERVICE CRANE Fassi F.80 WATER PUMP (UDOR 200) Max Water Delivery: 200 l/min Max Water Pressure: 80 bar WEIGHT Approx. total weight: 20 t Hsdpfx Aaeyzx Txeajnk = Additional Information = Fuel type: Diesel Year of manufacture: 2009 Intended use: Construction Power: 188 kW (256 HP) CE marking: Yes General condition: Good Technical condition: Good Visual condition: Good Price: On request

Condition: used, Year of construction: 2021, Please provide reference number upon request: 22668 Specifications: Operating hours: approx. 2000 Good undercarriage with tires Blade with trailer hitch Winch Lever controls Weight: 3034 kg Power: 40.3 kW Hjdpfeyuan Nox Aaaonk 12 V Hatz engine Width: 1680 mm Video available Service documentation available Ready for delivery Description: A 2021 Geotech 504 is a modern, compact, and highly flexible geotechnical drilling rig with a Stage V engine and advanced functions suitable for most ground investigation methods. It is easy to transport. Own weight: 3034 Model: 504 Georigg med skjær = More information = Serial number: 2xxxx Please contact ATS Norway for more information

Year of construction: 2006, operating hours: 4,029 h, condition: used, = Additional options and accessories = - Rubber tracks = Remarks = An authorized SUBARU dealer in Łaziska Górne has for sale a Vermeer D16X20a Horizontal Drill Rig from late 2006. This machine belongs to a large company that went out of business and is disposing of its equipment thanks to us. We have many years of experience with this type of machinery, so we're offering it for sale. The Vermeer has approximately 4,000 hours of operation, and the condition of the hydraulics and engine indicates this is the original mileage. We've checked the entire engine and hydraulics; everything is in working order. The price includes a NEW mud system with a 2000-liter tank. We also offer shipping throughout the European Union. The price includes a complete set of registration documents. We offer all payment methods: Leasing, credit, cash, and bank transfer. Payments in cash or by bank transfer allow you to drive the car straight from the showroom. We also handle insurance – we'll calculate the cheapest premium for any vehicle – CHECK US OUT! For more information about our services, contact our sales representatives. Hjdpfx Aasy A Ik Neaonk Technical Specifications: Model: Perkins 704-30 Type: Diesel, 4-cylinder Displacement: 3.0 l Power: approx. 65 hp Simple mechanical engine – no electronics, inexpensive to service Pulling/push force: 16,000 lb (~7.2 t) Torque: approx. 2700 Nm Rotation speed: ~150 rpm Rod length: approx. 3 m Machine weight: approx. 4.3 t Hydraulics and drilling fluid Fluid flow: ~95 l/min Fluid pressure: up to ~50 bar Hydraulic tank: ~87 l Ideal for: drilling for water and sewage systems, Gas pipelines Fiber optics and power cables Urban work (compact dimensions) Key advantages: Simple design, easy to use and repair Low fuel consumption (~5–8 l/h) Compact and mobile Very good for connections and medium-sized drilling The price shown is net and applies to export and businesses. A significant discount is available for individual customers - Please contact us directly by phone to get the best price :) = More information = General information Year of manufacture: Dec 2006 Field of application: Construction Technical information Power: 48 kW (65 HP) Number of cylinders: 3 Track width: 18 cm Type of fuel: Diesel Engine type: Perkins in-line Empty weight: 3.999 kg Dimensions (LxBxH): 510 x 110 x 220 cm Warranty Warranty: 1 month Other information Purchase on credit is possible: Yes Leasing is possible: Yes Digging depth: 150 m Engine type: in-line

Condition: used, Year of construction: 2016, working width: 600 mm, operating hours: 803 h, loading space volume: 3,600 m³, Equipment: lighting, onboard computer, Operating hours: 803, Area output: 6004, Precision harrow, Tramline control, Hydraulic folding, Hydraulic coulter pressure adjustment, Pneumatic, Track marker, Track loosener, Pre-markers, ISOBUS, Double disc coulters_____ISOBUS terminal, Coulters replaced, Storage location: With customer Hnsdpfxsyz Hl Ao Aaask

Condition: used, Year of construction: 2016, working width: 150 mm, Equipment: lighting, Number of rows: 60, row/body spacing: 25 cm, area output: 5000, pneumatic_____Width: 15.0 m, row spacing: 25.0 cm, seeding unit: coulter, seed transport: pneumatic, chassis: trailed, storage location: customer. Hnodpfxsyz Hlis Aaaek

Condition: used, power: 127 kW (172.67 HP), gearing type: hydrostat, fuel type: diesel, color: red, first registration: 08/2012, emission class: euro3, Year of construction: 2012, operating hours: 10,700 h, - Central lubrication - Tool box The Jama SBU 8000 machine from 2012 is a solid and proven mechanical scaler, designed specifically for work in difficult mining conditions, especially in underground workings. This model is equipped with a hydraulic hammer for demolishing rocks, which makes it an ideal tool for removing loose rock fragments and preparing workings for further work. The machine from the advertisement is equipped with an EPIROC hammer with an additional new tip! - Note that the cost of such a new JAMA machine from the dealer is as much as 903,000 EURO NET! For the machine itself without any additional devices such as a demolition hammer. - We have 2 identical SBU 8000 machines in our offer, the one from the advertisement is from 2012, and the other from 2008 is almost 10 thousand euro cheaper! Also in the offer: JAMA machine for spraying concrete in tunnels Designed for finishing and securing works in underground corridors and tunnels High efficiency, spraying precision and large working range Ideal for use in mining, tunneling and large infrastructure investments - Key technical features of Jama SBU 8000 (2008/2012) Weight: approx. 30,000 kg Dimensions: length 15 m, width 2.75 m, height 3.1 m Boom reach: from 3 m below the machine level to 9 m above, and over 6 m to the sides Operator's cabin: meets FOPS standards, equipped with an armoured windscreen and a hydraulically controlled explosion-proof cover Drivetrain: two axles, turning radius 5.2 m Stabilisation: four stabilizing outriggers and a blade at the front System safety: "Danger Mode" function enabling quick withdrawal of the machine in case of danger Comfort and ergonomics The operator's cabin has been designed with maximum comfort and safety in mind: Operator's seat: pneumatically suspended Control: joysticks placed in armrests Visibility: cabin tilts by 13° for better visibility during work Additional equipment: shoe washer at the entrance, doors with gas cylinders enabling quick exit of the cabin if necessary In short, we have in our offer: 2X Jama SBU8000 - 2012 and 2008 1X Jama Concrete maschine Inspection report: Machine in good working order Hodpfx Aasy Al Sksaenk purchased from the first owner of the company who made tunnels in Sweden, serviced on an ongoing basis at JAMY service. The price given in the advertisement is NET and is valid for export or for companies! For more information, please contact the seller. Technical data – Deutz TCD 2013 L04 2V/m Parameter Value Engine type Four-stroke, in-line, 4-cylinder Displacement 4.8 liters (4800 cm³) Piston diameter × stroke 108 × 130 mm Compression ratio 18:1 Fuel system Common Rail injection (DCR) or mechanical Maximum power 104–129 kW (140–173 hp) at 2200–2300 rpm Maximum torque 565–670 Nm at 1600 rpm Minimum idle speed 650–900 rpm Fuel consumption (at full load) 208–218 g/kWh Weight (without accessories) Approx. 500 kg Cooling Liquid Emissions EU IIIA / US Tier 3 Rotation direction Counterclockwise (looking at flywheel) Firing order 1–3–4–2 - The price includes a complete set of documents for registration. In the case of a Udt test requirement, we also perform it for a fee and quickly. We offer any form of payment: Leasing, credit, cash and...

Condition: used, power: 127 kW (172.67 HP), gearing type: hydrostat, fuel type: diesel, axle configuration: 4x4, first registration: 06/2012, emission class: euro3, Year of construction: 2012, operating hours: 10,000 h, Equipment: air conditioning, all wheel drive, onboard computer, - 1 fuel tank - Adjustable seats - Air seats - Auxiliary lamps - Central lubrication - Climate control - Driver seat manual adjustment - Electrically operated mirrors - Heater - High beam control system - Hydraulic power steering - Originally painted - Power steering - PTO - Tool box The Jama SBU 8000 machine from 2012 is a solid and proven mechanical scaler, designed specifically for work in difficult mining conditions, especially in underground workings. This model is equipped with a hydraulic hammer for demolishing rocks, which makes it an ideal tool for removing loose rock fragments and preparing workings for further work. - Note: at the JAMA dealer, the cost of such a new machine is as much as 903,000 EURO NET! For the machine itself without any additional devices such as a demolition hammer. - We have 2 identical SBU 8000 machines in our offer, the one in the advertisement is from 2012, and the other from 2008 is almost 10 thousand euro cheaper! Also in the offer: JAMA machine for spraying concrete in tunnels Designed for finishing and securing works in underground corridors and tunnels High efficiency, spraying precision and large working range Ideal for use in mining, tunneling and large infrastructure investments - Key technical features of Jama SBU 8000 (2008/2012) Weight: approx. 30,000 kg Dimensions: length 15 m, width 2.75 m, height 3.1 m Boom reach: from 3 m below the machine level to 9 m above, and over 6 m to the sides Operator's cabin: meets FOPS standards, equipped with an armoured windscreen and a hydraulically controlled explosion-proof cover Drive system: two axles, turning radius 5.2 m Hedpfx Aasy Al Iroajnk Stabilisation: four stabilizing supports and a blade at the front Safety system: "Danger Mode” enabling quick withdrawal of the machine in case of danger Comfort and ergonomics The operator's cabin has been designed with maximum comfort and safety in mind: Operator's seat: pneumatically suspended Controls: joysticks placed in armrests Visibility: cabin tilts by 13° for better visibility during work Additional equipment: shoe washer at the entrance, doors with gas cylinders enabling quick exit from the cabin if necessary In short, we have in our offer: 2X Jama SBU8000 - 2012 and 2008 1X Jama Concrete maschine Inspection report: Machine in good working order purchased from the first owner of the company who made tunnels in Sweden, serviced on an ongoing basis at JAMY service. The price given in the advertisement is NET and is valid for export or for companies! Detailed information from the seller. - The price includes a complete set of documents for registration. In the case of a Udt test requirement, we also perform it for a fee and quickly. We offer any form of payment: Leasing, credit, cash and transfer. When paying in cash or by bank transfer, you can drive the car out of the showroom right away. Additionally, we deal with insurance - we will calculate the cheapest premium for any vehicle - CHECK US OUT! We also deliver paid cars and trucks to the specified address throughout Europe. More information about our services from the sellers. General information Field of application: Mining Technical information Number of cylinders: ...

Year of construction: 2021, operating hours: 600 h, condition: used, Mud rarely used. Fits Vermeer, Ditch Witch, and TORO. Fully operational. The Ditch Witch FT5 model is a drilling fluid management and mixing device used in jacking/directional drilling (HDD) applications. Released in 2021. Drilling fluid tank capacity: 200 gallons (≈ 757 L) Maximum flow to drilling unit: 18 gpm (≈ 68 L/min) Engine: Honda GX160 (single-cylinder, air-cooled) Dimensions (standard) Length: 1.85 m / with hose and valve: 2.13 m; width: 0.813 m; Height: 1.36 m Weight (dry) ~ 182 kg Weight with filled tank (full water) ~ 939 kg The unit has a narrow tank, allowing it to be placed next to the drilling machine on a trailer – making it easier to transport to the jobsite. Hnsdpfxoy Alxqe Aaaok It features a Venturi wet hopper, which allows for the efficient mixing of additives with the fluid, speeding up mixing cycles. The design is relatively simple, with several configuration options to adapt the equipment to various jobsite layouts. The FT5 series is part of the Ditch Witch fluid management system line. The price shown is net and valid for export and business use. A significant discount is available for individual customers - Please contact us directly by phone to obtain the best price :) = More information = Type of fuel: Petrol Year of manufacture: 2021 Field of application: Construction Make of engine: Honda Warranty: 3 months Purchase on credit is possible: Yes Leasing is possible: Yes