Used Nodet Seed Drill for sale (778)

Condition: used, Year of construction: 2019, Please provide reference number upon request: 21113 Specifications: Hnedpfx Aaow Ragkeask 2019 model Impact hours: 3550 (may increase slightly) Compressor hours: 5538 (may increase slightly) Engine hours: approx. 8300 (may increase slightly) Winch Rod changer Water mist system Carousel Volvo engine Undercarriage (see photos) Remote control CME grinder L5 GPS Recently serviced Hammer is good. Work lights Thread greasing system Radio Air conditioning Ready for delivery Description: Sandvik DX800i drill rig with L5 GPS for sale.According to the owner, everything is working properly, and the rig was recently serviced.The hammer has been repacked newly.Ready for delivery. = More information = Serial number: 5xxxx Please contact ATS Norway for more information

Year of construction: 2009, operating hours: 18,454 h, condition: used, NCB FD 1800 HD DT 18,447 working hours Year of manufacture: 2009 Equipped with Fassi F80A.23 + remote control from 2003 UNDERCARRIAGE Overall Length: 3,210 mm Track Width: 2,350 mm Shoe Width: 500 mm ENGINE DEUTZ Engine Model: TCD 2013 L6 2V Max Power Output: 190 kW Rated Speed: 2,300 rpm Fuel Tank Capacity: 350 l HYDRAULIC SYSTEM Hydraulic Pumps: - 1st Circuit: 80 l/min - 2nd Circuit: 55 l/min - 3rd Circuit: 55 l/min Hydraulic Oil Tank Capacity: 481 l Operating Pressure: 250 bar MAST Mast Length: 8,000 mm Pull-Down Cylinder Force (Push/Pull): 13,000 / 20,000 kgm Pull-Down Stroke: 4,300 mm Max Rod Length: 4,000 mm ROTARY HEAD T3-2000: - Max Torque: 2,045 kgm - Speed Range: 0 – 113 rpm - Number of Hydraulic Motors: 3 - Hydraulic Motor Type: CHAR-LYNN T2-1000: - Max Torque: 1,000 kgm Hnedpfx Asyzx Txoaajk - Speed Range: 0 – 88 rpm - Number of Hydraulic Motors: 2 - Hydraulic Motor Type: DANFOSS WINCH AUXILIARY WINCH Max Pulling Force (1st Layer): 15 kN Rope Diameter: 10 mm CLAMPS CLOSING CLAMP - Clamp Diameter: 350 mm - Clamp Force: 15,300 daN BREAKOUT CLAMP - Clamp Diameter: 350 mm - Clamp Force: 5,500 daN - Breakout Force: 15,300 daN THIRD CLAMP - Clamp Diameter: 350 mm - Clamp Force: 15,300 daN AUXILIARY SERVICE CRANE Fassi F.80 WATER PUMP (UDOR 200) Max Water Delivery: 200 l/min Max Water Pressure: 80 bar WEIGHT Approx. total weight: 20 t = Additional Information = Fuel type: Diesel Year of manufacture: 2009 Intended use: Construction Power: 188 kW (256 HP) CE marking: Yes General condition: Good Technical condition: Good Visual condition: Good Price: On request

Condition: used, Year of construction: 2021, Please provide reference number upon request: 22668 Specifications: Operating hours: approx. 2000 Good undercarriage with tires Hsdpfjyuan Nex Aaajnk Blade with trailer hitch Winch Lever controls Weight: 3034 kg Power: 40.3 kW 12 V Hatz engine Width: 1680 mm Video available Service documentation available Ready for delivery Description: A 2021 Geotech 504 is a modern, compact, and highly flexible geotechnical drilling rig with a Stage V engine and advanced functions suitable for most ground investigation methods. It is easy to transport. Own weight: 3034 Model: 504 Georigg med skjær = More information = Serial number: 2xxxx Please contact ATS Norway for more information

Year of construction: 2006, operating hours: 4,029 h, condition: used, = Additional options and accessories = - Rubber tracks = Remarks = An authorized SUBARU dealer in Łaziska Górne has for sale a Vermeer D16X20a Horizontal Drill Rig from late 2006. This machine belongs to a large company that went out of business and is disposing of its equipment thanks to us. We have many years of experience with this type of machinery, so we're offering it for sale. The Vermeer has approximately 4,000 hours of operation, and the condition of the hydraulics and engine indicates this is the original mileage. We've checked the entire engine and hydraulics; everything is in working order. The price includes a NEW mud system with a 2000-liter tank. We also offer shipping throughout the European Union. The price includes a complete set of registration documents. We offer all payment methods: Leasing, credit, cash, and bank transfer. Payments in cash or by bank transfer allow you to drive the car straight from the showroom. We also handle insurance – we'll calculate the cheapest premium for any vehicle – CHECK US OUT! For more information about our services, contact our sales representatives. Technical Specifications: Model: Perkins 704-30 Type: Diesel, 4-cylinder Displacement: 3.0 l Power: approx. 65 hp Simple mechanical engine – no electronics, inexpensive to service Pulling/push force: 16,000 lb (~7.2 t) Torque: approx. 2700 Nm Rotation speed: ~150 rpm Rod length: approx. 3 m Machine weight: approx. 4.3 t Hydraulics and drilling fluid Fluid flow: ~95 l/min Fluid pressure: up to ~50 bar Hydraulic tank: ~87 l Ideal for: drilling for water and sewage systems, Gas pipelines Fiber optics and power cables Urban work (compact dimensions) Hsdpey A Ik Njfx Aaaenk Key advantages: Simple design, easy to use and repair Low fuel consumption (~5–8 l/h) Compact and mobile Very good for connections and medium-sized drilling The price shown is net and applies to export and businesses. A significant discount is available for individual customers - Please contact us directly by phone to get the best price :) = More information = General information Year of manufacture: Dec 2006 Field of application: Construction Technical information Power: 48 kW (65 HP) Number of cylinders: 3 Track width: 18 cm Type of fuel: Diesel Engine type: Perkins in-line Empty weight: 3.999 kg Dimensions (LxBxH): 510 x 110 x 220 cm Warranty Warranty: 1 month Other information Purchase on credit is possible: Yes Leasing is possible: Yes Digging depth: 150 m Engine type: in-line

Condition: used, power: 127 kW (172.67 HP), gearing type: hydrostat, fuel type: diesel, color: red, first registration: 08/2012, emission class: euro3, Year of construction: 2012, operating hours: 10,700 h, - Central lubrication - Tool box The Jama SBU 8000 machine from 2012 is a solid and proven mechanical scaler, designed specifically for work in difficult mining conditions, especially in underground workings. This model is equipped with a hydraulic hammer for demolishing rocks, which makes it an ideal tool for removing loose rock fragments and preparing workings for further work. The machine from the advertisement is equipped with an EPIROC hammer with an additional new tip! - Note that the cost of such a new JAMA machine from the dealer is as much as 903,000 EURO NET! For the machine itself without any additional devices such as a demolition hammer. - We have 2 identical SBU 8000 machines in our offer, the one from the advertisement is from 2012, and the other from 2008 is almost 10 thousand euro cheaper! Also in the offer: JAMA machine for spraying concrete in tunnels Designed for finishing and securing works in underground corridors and tunnels High efficiency, spraying precision and large working range Ideal for use in mining, tunneling and large infrastructure investments - Key technical features of Jama SBU 8000 (2008/2012) Weight: approx. 30,000 kg Dimensions: length 15 m, width 2.75 m, height 3.1 m Boom reach: from 3 m below the machine level to 9 m above, and over 6 m to the sides Operator's cabin: meets FOPS standards, equipped with an armoured windscreen and a hydraulically controlled explosion-proof cover Drivetrain: two axles, turning radius 5.2 m Stabilisation: four stabilizing outriggers and a blade at the front System safety: "Danger Mode" function enabling quick withdrawal of the machine in case of danger Comfort and ergonomics The operator's cabin has been designed with maximum comfort and safety in mind: Operator's seat: pneumatically suspended Control: joysticks placed in armrests Visibility: cabin tilts by 13° for better visibility during work Additional equipment: shoe washer at the entrance, doors with gas cylinders enabling quick exit of the cabin if necessary In short, we have in our offer: 2X Jama SBU8000 - 2012 and 2008 1X Jama Concrete maschine Inspection report: Machine in good working order purchased from the first owner of the company who made tunnels in Sweden, serviced on an ongoing basis at JAMY service. The price given in the advertisement is NET and is valid for export or for companies! Hnodpfxey Al Sks Aaaok For more information, please contact the seller. Technical data – Deutz TCD 2013 L04 2V/m Parameter Value Engine type Four-stroke, in-line, 4-cylinder Displacement 4.8 liters (4800 cm³) Piston diameter × stroke 108 × 130 mm Compression ratio 18:1 Fuel system Common Rail injection (DCR) or mechanical Maximum power 104–129 kW (140–173 hp) at 2200–2300 rpm Maximum torque 565–670 Nm at 1600 rpm Minimum idle speed 650–900 rpm Fuel consumption (at full load) 208–218 g/kWh Weight (without accessories) Approx. 500 kg Cooling Liquid Emissions EU IIIA / US Tier 3 Rotation direction Counterclockwise (looking at flywheel) Firing order 1–3–4–2 - The price includes a complete set of documents for registration. In the case of a Udt test requirement, we also perform it for a fee and quickly. We offer any form of payment: Leasing, credit, cash and...

Condition: used, power: 127 kW (172.67 HP), gearing type: hydrostat, fuel type: diesel, axle configuration: 4x4, first registration: 06/2012, emission class: euro3, Year of construction: 2012, operating hours: 10,000 h, Equipment: air conditioning, all wheel drive, onboard computer, - 1 fuel tank - Adjustable seats - Air seats - Auxiliary lamps - Central lubrication - Climate control - Driver seat manual adjustment - Electrically operated mirrors - Heater - High beam control system - Hydraulic power steering - Originally painted - Power steering - PTO - Tool box The Jama SBU 8000 machine from 2012 is a solid and proven mechanical scaler, designed specifically for work in difficult mining conditions, especially in underground workings. This model is equipped with a hydraulic hammer for demolishing rocks, which makes it an ideal tool for removing loose rock fragments and preparing workings for further work. - Note: at the JAMA dealer, the cost of such a new machine is as much as 903,000 EURO NET! For the machine itself without any additional devices such as a demolition hammer. - We have 2 identical SBU 8000 machines in our offer, the one in the advertisement is from 2012, and the other from 2008 is almost 10 thousand euro cheaper! Also in the offer: JAMA machine for spraying concrete in tunnels Designed for finishing and securing works in underground corridors and tunnels High efficiency, spraying precision and large working range Ideal for use in mining, tunneling and large infrastructure investments - Key technical features of Jama SBU 8000 (2008/2012) Weight: approx. 30,000 kg Hnodpey Al Irefx Aaask Dimensions: length 15 m, width 2.75 m, height 3.1 m Boom reach: from 3 m below the machine level to 9 m above, and over 6 m to the sides Operator's cabin: meets FOPS standards, equipped with an armoured windscreen and a hydraulically controlled explosion-proof cover Drive system: two axles, turning radius 5.2 m Stabilisation: four stabilizing supports and a blade at the front Safety system: "Danger Mode” enabling quick withdrawal of the machine in case of danger Comfort and ergonomics The operator's cabin has been designed with maximum comfort and safety in mind: Operator's seat: pneumatically suspended Controls: joysticks placed in armrests Visibility: cabin tilts by 13° for better visibility during work Additional equipment: shoe washer at the entrance, doors with gas cylinders enabling quick exit from the cabin if necessary In short, we have in our offer: 2X Jama SBU8000 - 2012 and 2008 1X Jama Concrete maschine Inspection report: Machine in good working order purchased from the first owner of the company who made tunnels in Sweden, serviced on an ongoing basis at JAMY service. The price given in the advertisement is NET and is valid for export or for companies! Detailed information from the seller. - The price includes a complete set of documents for registration. In the case of a Udt test requirement, we also perform it for a fee and quickly. We offer any form of payment: Leasing, credit, cash and transfer. When paying in cash or by bank transfer, you can drive the car out of the showroom right away. Additionally, we deal with insurance - we will calculate the cheapest premium for any vehicle - CHECK US OUT! We also deliver paid cars and trucks to the specified address throughout Europe. More information about our services from the sellers. General information Field of application: Mining Technical information Number of cylinders: ...

Year of construction: 2021, operating hours: 600 h, condition: used, Mud rarely used. Fits Vermeer, Ditch Witch, and TORO. Fully operational. The Ditch Witch FT5 model is a drilling fluid management and mixing device used in jacking/directional drilling (HDD) applications. Released in 2021. Drilling fluid tank capacity: 200 gallons (≈ 757 L) Maximum flow to drilling unit: 18 gpm (≈ 68 L/min) Engine: Honda GX160 (single-cylinder, air-cooled) Dimensions (standard) Length: 1.85 m / with hose and valve: 2.13 m; width: 0.813 m; Height: 1.36 m Weight (dry) ~ 182 kg Weight with filled tank (full water) ~ 939 kg The unit has a narrow tank, allowing it to be placed next to the drilling machine on a trailer – making it easier to transport to the jobsite. It features a Venturi wet hopper, which allows for the efficient mixing of additives with the fluid, speeding up mixing cycles. The design is relatively simple, with several configuration options to adapt the equipment to various jobsite layouts. The FT5 series is part of the Ditch Witch fluid management system line. The price shown is net and valid for export and business use. A significant discount is available for individual customers - Please contact us directly by phone to obtain the best price :) = More information = Type of fuel: Petrol Year of manufacture: 2021 Field of application: Construction Make of engine: Honda Warranty: 3 months Purchase on credit is possible: Yes Hnodpfey Alxqsx Aaask Leasing is possible: Yes

Condition: used, Year of construction: 2015, Please provide reference number upon request: 21725 Specifications: 2015 model Engine hours: Approx. 5,850 Weight: 38,000 kg Dafo fire suppression system 2 booms Laser Both drill hammers and spare hammer overhauled in 2024 LED lights Radio/CD Climate control/AC Service performed as needed Rear camera not functioning Ready for delivery Boom 1: Hnedsxu A Hmepfx Aaask Impact hours: Approx. 575 Electric motor hours: Approx. 11,100 Total drilled length: Approx. 603,000 meters Compressor hours: Approx. 2,900 Boom 2: Impact hours: Approx. 510 Electric motor hours: Approx. 7,200 Total drilled length: Approx. 387,000 meters Compressor hours: Approx. 2,900 Own weight: 38000 Model: Boomer MC2 Tunnelborerigg. = More information = Serial number: TMG15URExxxx Please contact ATS Norway for more information

Year of construction: 2011, condition: used, Please provide reference number upon request: 20555 Specifications: Model year: 2011 Engine hours: approx. 7,200 (may increase – machine is in daily use) New chains on the mast Undercarriage: see photos for condition Boom rotor replaced about a year ago (cost: EUR 21,000) Oil leakage under the rig Tracks at the front of the mast are damaged and need replacement Hammer not included Video available Delivery by arrangement Description:2011 Gemsa Gemrok 45 SDKJM drill rig.Fitted with new chains on the mast and storage unit. The boom rotor was replaced approximately one year ago, with a total investment of EUR 21,000.There is an oil leak under the rig, and the front tracks on the mast are damaged and will need to be replaced.The machine is currently in daily use, so the hour count may increase.A video is available upon request. Delivery to be arranged. Hnjdpfxjwmv R Es Aaaek Hours: 7200 Own weight: 11 Model: Gemrok 45 borevogn. SE VIDEO = More information = Field of application: Construction Serial number: 110245xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. Hnodpfxoyq Iarj Aaajk 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2019, operating hours: 2,623 h, condition: used, General Information Year of manufacture: 2019 Model year: 2019 Hjdpfx Aaeyxdqwjaonk Color: Red Intended use: Construction Technical Information Power: 36 kW (49 hp) Number of cylinders: 4 Engine displacement: 2,200 cc Fuel type: Diesel Drive: Wheeled Unladen weight: 3,350 kg Functional CE marking: yes Condition Overall condition: good Technical condition: good Optical condition: good

Year of construction: 2019, operating hours: 2,623 h, condition: used, General Information Year of manufacture: 2019 Model year: 2019 Color: Red Intended use: Construction Technical Information Power: 36 kW (49 hp) Number of cylinders: 4 Engine displacement: 2,200 cc Fuel type: Diesel Drive: Wheeled Unladen weight: 3,350 kg Functional CE marking: yes Condition Overall condition: good Hsdpfx Aoyxdqqeaaonk Technical condition: good Optical condition: good

Condition: used, Year of construction: 2012, TM Bohrtechnik TMB 25 drilling rig, year of manufacture: 2012, compressor operating hours: 6,006h, diesel engine operating hours: 8,718h, 6x drill rods, drill head, dust collector, immediately ready for use, good condition, German machine. Upon request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel.) will be happy to assist you. For further information, please visit our homepage. Subject to errors and prior sale! = More information = Application: Construction Please contact Tobias Ebert for further information. Hnjdpfxsyxkmfe Aaaek

Condition: new, fuel tank capacity: 1,500 l, Year of construction: 2026, ALTRO-Tec GmbH provides the right vacuum suction system for every application! M-VAC 1500 l / 1.5 m³ - 1.5 m³ hot-dip galvanized tank - Fully galvanized 2.7 t chassis - Lid for barrel opening - Tank can be emptied by switching the compressor - Small, maneuverable vehicle—ideal for urban areas, parking garages, etc. - Suitable accessories available for various applications - Suction depths up to 6 meters possible - 3600 liters air flow rate - Various drive types: petrol, diesel, electric Application examples: - Extraction of highly sandy drilling slurry in specialist foundation engineering - Extraction of liquids, including those containing solids - Cleaning of channels, shafts, pits - Emptying of portable toilets and shafts - Suction of lyes, emulsions, and wastewater Hodpfx Asu Iawweaasnk - Wide range of accessories—custom paint finish available (optional) At ALTRO-Tec GmbH, you get everything from a single source: - On-site demonstration and operator training - Repairs and maintenance—fast spare parts supply - Assistance in case of technical issues - All types of superstructures: Multi Car, hook lift system, and much more! - Customized builds / special filters—rental equipment and trade-in options Delivery worldwide For technical data and further information, please contact us. *Custom builds and special equipment* available on request, please contact us. Delivery times and availability upon agreement. Images are sample images; for current images, please contact us at: 02723 717 61-0 or by e-mail: anfrage(ât)altro-tec.de Please note that we can only process your inquiry if you provide your name and contact details such as your phone number or e-mail address.

Condition: new, Year of construction: 2026, Mobile Suction System 0.5 - 14 m³ Suction Tank / Vacuum System - Mounted on subframe DIN 30722 - Steel tank with a capacity of 500 – 14,000 liters - Tank and subframe hot-dip galvanized - Continuous angle frame fully welded along entire length Hedpol I I Rpsfx Aaaonk - Designed for max. 0.5 bar pressure - Designed for max. 1.0 bar vacuum - 2 liquid separators - Safety system including manhole cover and control valve - Safety manhole with over-suction valve - Mechanical fill level indicator with scale - 2 internal baffle plates reinforced with T-bar - Suction connection at rear bottom: 4" x Ø 108 mm Perrot coupling - Suction connection on left: 4" x Ø 108 mm Perrot coupling - Lockable storage boxes on left and right sides for hoses and tools - Engine unit installed at the front, between tank and cable hook Compressor (depending on version and requirement, e.g. MECII 9000 Ballast System): - Vacuum compressor with injection air cooling - Heat-resistant vanes - Crash protection system - Maximum output: 9,000 liters/minute - Max. pressure: 0.5 bar - Max. vacuum: -0.95 bar - Continuous operation permissible at -0.6 bar - Automatic lubrication - Lubricant reservoir: 2.5 liters - Lubrication oil fill level indicator Engine: - Briggs & Stratton Vanguard - 31 HP / 23.1 kW - V-twin engine, 4-stroke - OHV valve control - Electric start - 12-volt battery - V-belt drive with protective cover - Fully mounted on console - Enclosure for theft protection High-Pressure Cleaner: - Working pressure: 30-150 bar - Cleaning capacity: 13 l/min - Features genuine Honda engine - Automatic high-pressure hose reel - 15m high-pressure hose DN08 - Cleaning lance - Dirt blaster - 2 plastic tanks, each 500 liters For technical specifications and further information, please contact us. Worldwide delivery, dealer inquiries welcome. - Custom designs and special equipment available on request. Please contact us - Images are for illustration purposes only. For current images, please contact us at: 02723 717 61-0 or by email: anfrage(ât)altro-tec.de Please note that we can only process your inquiry if you provide your name and contact details, such as your phone number or email address.

Condition: used, Year of construction: 1986, Please provide reference number upon request: 21730 Spesifikasjoner:  1986 modell Motortimer: ca 3000 6 sylindret Dutch motor Skiftet motor   HLR 438l hammer  Vernebur  Understell (se bilder)  Maskin bredde: 231 cm  Vinsj  Støvsuger  Lys  Video  Leveringsklar      Beskrivelse: Vi har en 1986 Tamrock DHA400 Borerigg m/ HLR 438L hammer for salg.  Riggen fungere, men feil og mangler kan forekomme og noe påkost må regnes med da den er ifra 1986. Leveringsklar. Own weight: 1 Engine hours: 3000 Model: DHA400 Borerigg m/ HLR 438L hammer = More information = Serial number: 606xxxx Please contact ATS Norway for more information Hodpoxu A N Ijfx Aaajnk

Condition: used, Please provide reference number upon request: 20517 Specifications: - Unknown model year - 5224 engine hours - 3049 hammer hours - Machine width: 225 cm - Vacuum cleaner - Rod holder - Winch - Pendulum on undercarriage - Undercarriage (see pictures) - Lights - Ready for delivery Description: We have a Tamrock DHA 400S drilling rig for sale. The drilling rig starts and runs, but there is something wrong with the engine. The cause is unknown. Apart from this, everything should work as it should according to the owner. Services have been taken by the owner himself continuously. Some additional costs must be expected. Ready for delivery. Own weight: Width: 255 Hammer hours: 3049 Engine hours: 5224 Model: DHA 400 S Hjdpfewl Ubaox Aaaenk = More information = New: No Field of application: Construction Serial number: A00xxxx Please contact ATS Norway for more information

Condition: used, Please provide reference number upon request: 18477 Description: Atlas ROC 712 H-01 drilling rig is sold as a repiar object as it is in an uncertain condition. It was in use 2 years ago, the owner says. The engine hours on it are 18902 hours and stroke hours are 9771 hours. The drilling rig does not have a compressor. Ready for delivery Own weight: 10000 Model: ROC 712 H-01 borerigg ekt uten kompressor = More information = New: No Field of application: Construction Please contact ATS Norway for more information Hnedpfx Ajx A R Uhjaask

Condition: used, Year of construction: 2014, Please provide reference number upon request: 21943 Specifications: Year model: 2014 Engine hours: approx. 6000 Power: 105 kW Weight: 11,000 kg Undercarriage (see photos) Remote control Winch Track width: approx. 25 cm Machine width: approx. 220 cm Newly overhauled engine Newly overhauled hammer, used approx. 20 hours after overhaul Stage 4 engine Screen backlight is slightly weak Description:Sandvik Dino DC400RI drilling rig from 2014.Both the engine and the hammer have been overhauled. The engine has run approx. 1000 hours since the overhaul, while the hammer has only been used for a couple of weeks.Some minor leakage/sweating.Can be delivered at short notice.See video. Own weight: 11000 Engine hours: 6000 Model: Dino DC400RI Borerigg. Overhalt motor og hammer SE VIDEO = More information = Hnodpjx Ananjfx Aaajk Serial number: 2xxxx Please contact ATS Norway for more information

Year of construction: 1999, condition: used, Please provide reference number upon request: 11049 Specifications: - 1999 model - Hours: approximately 12,750 - Winch - Vacuum cleaner - 38 hammers Hjdpfx Aaexlnlcjajnk - 4 cylinder water-cooled Deutz engine - Okay chassis - Ready for delivery Description: Owner says it works as it should and that it is a 1999 model It is Ready for Delivery Own weight: 1 Model: Copco Roc Borerigg = More information = Field of application: Construction Please contact ATS Norway for more information

Condition: used, Year of construction: 1989, Please provide reference number upon request: 21250 Hnodpsw Ucm Iofx Aaajk Specifications: 1989 model Hours: 5520 Hammer is working Needs a new battery Winch and vacuum are working according to the owner Ready for delivery. Own weight: 11 Engine hours: 5520 Model: 712HC-01 = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2004, Please provide reference number upon request: 21885 Specifications: - 2004 (2012) model - Hours: Approx. 600 - Weight: 6200 kg - Chassis from 2004 - The rest is from 2012 - Drilling equipment is not included - 2 engines can be included as parts - Ready for delivery Description: Hnodpfxsxy Ex Ns Aaaek The rig burned down and then everything was replaced in 2012. The chassis is from 2004, but the rest has been replaced. The job was done by Epiroc. The machine is ready for delivery. Own weight: 6200 Engine hours: 600 Model: 2004 (2012) Welldrill 3050CR Borerigg = More information = Serial number: EKJ0043xxxx Please contact ATS Norway for more information

Year of construction: 2019, operating hours: 4,395 h, condition: used, = Additional options and accessories = - Air conditioning - Crane hook - Sper = Remarks = Chassis Chassis height: 100 cm Wheelbase: 410 cm Fuel tank capacity: 280 L Brand trailer coupling: Pommier Structure Construction year: 2019 Risa G2T drilling crane, Year of construction 2019, Max reach horizontaly 615 cm, Max vertical reach 900 cm, Drilling distance 310 cm to 580 cm, 1 hydraulic extension, Max load on max reach 1500 kg, 2 support legs, Remote control, Hook, Drills included, Drill motor torque 1,000 m/kg // Truck 4x2, Euro 6, Adblue, Automatic gearbox, Diff lock, DTI engine, Full steel suspension, Pommier hitch, Day cabin, Airconditioning, Engine hours 4395, Shipment dimensions 775x250x330 cm = More information = General information Year of manufacture: Oct 2019 Cab: single, day Registration number: FK509RR Serial number: VF640J563LB013282 Technical information Power: 177 kW (240 HP) Drivetrain Type of fuel: Diesel Fuel tank: 280 litres Hedswvqfispfx Aaaonk Transmission Transmission: Automatic Axle configuration Tyre size: 275/70 R22.5 Suspension: leaf suspension Front axle: Steering; Tyre profile left: 75%; Tyre profile right: 75% Rear axle: Double wheels; Differential lock; Tyre profile left inner: 45%; Tyre profile right outer: 40% Measures Dimensions (LxBxH): 775 x 250 x 330 cm Wheelbase: 410 cm Weights Empty weight: 10.295 kg Carrying capacity: 4.005 kg GVW: 14.300 kg Functional Mast: telescopic (1 part) Maximum reach: 615 cm Extendable superstructure: Yes Environment Emission class: Euro 6 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: used, Year of construction: 2013, operating hours: 9,462 h, Horizontal drilling and flushing rig, Tracto Technik, Grundodrill 18 ACS * Grundodrill * Model 18 ACS * Year of manufacture: 2013 * 9,462 hours (as per meter reading) * Driven by 4-cylinder Cummins diesel engine with 123 kW / 167 HP * 2 speed ranges * Single cab with 1 seat * Transport dimensions (L x W x H): 6450 x 2350 x 2650 mm * Weight: 15,110 kg * Crawler chassis with 34-37 mm rubber tracks Hnedpfx Aaeym H A Reask * Undercarriage length x width: 2650 x 460 mm * Rod magazine (holds 50 drill rods? Diameter: 60 mm) * 1 x drill head, see pictures * Remote control, air conditioning, locating system This description does not represent a binding offer and may contain errors. No guarantee on all information provided. Please also visit our homepage.

Condition: used, Year of construction: 2019, operating hours: 810 h, Horizontal HDD drilling rig, one of the most powerful rigs in the 4-ton class. Powered by a 4-cylinder HATZ diesel engine. Pullback and thrust force: 41.5 kN each. Equipped with 26 drill rods, each approx. 2,000 mm in length, laying radius 30 m, hydraulic anchoring system. High-pressure pump from FCM, type E0413 HD, 95 liters. Pilot bore diameter: 60–110 mm. The vehicle may be covered with promotional decals and/or lettering. Our offer does not generally include a new TÜV approval. If a new TÜV approval is required, we are happy to provide a quote from our partner workshops! The vehicle may have advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply. Hnsdpfx Ajv N Suaoaask We are happy to provide a financing or leasing offer for this unit. Please contact us!