Used bulldozers for sale (17)

Condition: good (used), functionality: fully functional, Year of construction: 1999, operating hours: 11,000 h, BULLDOZER CATERPILLAR D 5 M LGP YEAR 1999 11,000 HOURS Gkjlsxxal Ujhcdw Njb RIPPER TILT BLADE

Condition: used, functionality: fully functional, mileage: 4,400 km, power: 129 kW (175.39 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 250 l, overall weight: 20,000 kg, empty load weight: 19,800 kg, drive condition: 80 %, Equipment: air conditioning, The bulldozer is in very good condition. It has a 4.20m wide six-way blade and a three-tooth ripper. It is prepared for Trimble machine control. This can be purchased separately if desired. Gkelhozw Eviocdw Nob Currently, the tracks are being replaced, and the upper idlers are being exchanged. The current hour meter reading is 4400 hours.

Condition: good (used), functionality: fully functional, power: 120 kW (163.15 HP), operation weight: 18,200 kg, Year of construction: 2015, operating hours: 5,700 h, Equipment: additional headlights, air conditioning, cabin, onboard computer, Liebherr PR724 LGP Year of manufacture: 2015 Operating hours: only 5,700 hours (documented) 3-tooth ripper Undercarriage: 70% good condition 910mm ground pads 6-way blade Blade width approx. 3.00m plus side extensions of 0.40m each Total blade width approx. 3.80m Fueling pump Air conditioning LED work lights Trimble laser system pre-installation 4-cylinder Liebherr engine with 120 kW / 163 hp Last service at 5,482 hours in 2025 Gjlezl Rapehcdw Nekb Operating weight: 18,200 kg CE certified From a German owner with a full history Serial number: VAUZ0755LZT014682 _____ Typographical errors and omissions in this offer are expressly reserved. Only the specific agreements in the order confirmation or purchase contract are binding.

Condition: used, power: 114 kW (155.00 HP), Year of construction: 2013, operating hours: 12,700 h, Equipment: air conditioning, cabin, Cat bulldozer D6K 2, year 2013, approx. 12,700 operating hours, 6-way blade, prepared for laser control, air conditioning, prepared for rear ripper. Sale only to traders or for export. Subject to errors and prior sale. Gkolhcdoypilyjw Nob

Condition: excellent (used), overall weight: 19,500 kg, chain condition: 95 %, Year of construction: 2024, operating hours: 615 h, Equipment: air conditioning, Komatsu D61 PX-24E0 Gjlhcdwozwd R Sj Njkb Year: 2024 Operation hours: 615 hrs. ROPS Airco Radio Back drive camera U/C: approx. 95% good trackshoes: 850 millimeter width PAT -Blade ripper valve CE / EPA Transport: 5.5 x 3 x 3.15 Operation weight: 19.5 to

Condition: used, power: 17 kW (23.11 HP), fuel type: diesel, color: yellow, Year of construction: 2006, operating hours: 195 h, machine/vehicle number: 4200208, Equipment: UVV, VIBROMAX VM 1500, very smooth-running, water-cooled 3-cylinder diesel engine Features / Technical specifications - Operating weight: 1,500 kg - Working width up to 850 mm - Frequency: 31 Hz - Amplitude: 2.4 mm - Automatic engine shutdown if the machine is tilted - Hydrodynamic brake - Lockable engine covers for vandalism protection Gkolhcjyznb Ssdw Neb

Condition: used, Year of construction: 1977, operating hours: 3,753 h, 1977 | Hanomag D 400LC | Used Tracked Dozer | 3753 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 7500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Gslozf Ifcjhcdw Nokb 👷‍♂️ Inspected by an independent expert 33 inspection points 19 approved ✅ 12 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "29698 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 1994, operating hours: 8,972 h, 1994 | Dresser TD 15 E Without Ripper | Used Tracked Dozer | 8972 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 21600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 53 approved ✅ 8 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the bulldozer. Both lift cylinders have leaks and shocks on the rods. Absence of a left diagonal reinforcement bar from the front blade frame – the bar has been repaired by welding. Slight spray of oil and smoke when opening the oil tank cap. No visibility on the hydraulic oil level. The left rear window has been replaced with plexiglass and the front windshield as well as the side windows are cracked. No retention of the door in the open position. Absence of the diesel tank cap. The engine is stopped by pulling a cable. The parking brake control has been replaced by a bolt. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40009 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed Gkelhcdeyq H Nlew Nob ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, power: 18 kW (24.47 HP), fuel type: diesel, color: yellow, Year of construction: 2013, operating hours: 370 h, machine/vehicle number: 2704198, Equipment: UVV, Equipment / Technical Data VIBROMAX VM 1500: Operating weight: 1,530 kg * Trench roller with radio remote control * Very smooth-running, water-cooled 3-cylinder diesel engine * Working width up to 850 mm * Frequency 31 Hz * Amplitude 2.4 mm * Automatic engine shutdown when the machine is tilted * Hydrodynamic brake * Lockable hoods for vandalism protection Gkoloyzntbshcdw Njb

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 10,300 kg, empty load weight: 10,300 kg, chain condition: 100 %, number of seats: 1, Year of construction: 2026, Equipment: ABS, UVV, additional headlights, air conditioning, cabin, head guard, hydraulics, onboard computer, rear pickup, steel tracks, Shantui DH10 LGP Crawler Bulldozer – Premium Technology, Immediately Available Net Price NEW: €127,000 = Gross €151,130 For sale: a powerful Shantui DH10 LGP bulldozer with wide LGP undercarriage (630 mm track shoes) — ideal for soft ground, landscaping as well as earthmoving and grading applications. Top Brand Components • Cummins QSF3.8 engine – 121 HP, EU Stage V • Linde Hydraulics – Made in Germany • Hydrostatic drive for maximum precision • Operating weight approx. 10.3 t • Very high tractive force for demanding tasks Shantui DH10-M LGP Version – perfect for challenging terrain • Extra wide undercarriage with 630 mm track shoes • Low ground pressure • High traction and stability Golhjyu Smdjcdw Njkb ⭐ SHANTUI – a benchmark of quality SHANTUI is part of the SDHI Group, an industrial conglomerate with over €80 billion annual turnover. • Linde Hydraulics is also part of the SDHI Group • Over 25 years joint venture with Komatsu – manufacturing directly for Komatsu • Decades of undercarriage production for Volvo, Komatsu, Hitachi, and many more • World-class OEM expertise in every SHANTUI product In short: Premium technology from leading manufacturers — at a significantly better price. ✅ Robust ✅ Efficient ✅ Immediately ready for use ✅ Excellent value for money Viewing and delivery possible. If interested, simply contact us — we’ll be happy to provide an offer. Bagger2Go GmbH Maybachstraße 10, 71735 Eberdingen

Condition: used, power: 60 kW (81.58 HP), fuel type: diesel, color: yellow, overall weight: 7,300 kg, tire size: 14.9-24/6pr awt, Year of construction: 2009, operating hours: 1,171 h, machine/vehicle number: 1802516, Equipment: UVV, additional headlights, all wheel drive, cabin, traction control, Equipment / Technical Specifications: - Gear stages 1 and 2 - Electric start - Frequency 29 Hz / 36 Hz - Amplitude 2 mm / 0.8 mm - Centrifugal force 138 kN / 84 kN - Centrifugal force / drum width 1,500 mm - Compaction depth 650 / 500 mm - Working speed 6.9 km/h - Transport speed 11 km/h - Gradeability 60 % - Steering angle ± 28 degrees Gkolhcoyzna Uedw Njb - Oscillation angle ± 15 degrees - Inner turning radius 2,970 mm - Linear drum load 20.6 kg/cm - Anti-slip system - Electronically controlled hydrostatic direct drive - Hydrostatic steering system with two steering cylinders

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 9,850 kg, operation weight: 9,850 kg, drive condition: 100 %, chain condition: 100 %, emission class: euro5, shovel volume: 2.4 m³, Year of construction: 2024, operating hours: 5 h, machine/vehicle number: 00001, Equipment: UVV, additional headlights, air conditioning, cabin, hydraulics, soot filter, steel tracks, SHANTUI – The global #1 bulldozer for 16 consecutive years – Manufacturer of crawler dozers – 10,000 units produced annually – Operating weight from 8 to 106 t, with power output from 63 to 963 kW! DEMO model for Europe – Operating weight: 9,850 kg - ROPS/FOPS cab with air conditioning + heating Gkelhcdwoyznfko Nsb - 4-cylinder Cummins QSF 3.8 l turbo diesel engine, Stage V, AdBlue - Power: 90 kW – 121 HP - Operating weight: 9,850 kg (with ripper + 700 kg) - Machine width (undercarriage): 2,110 mm - Blade width: 2,860 mm - Blade height: 1,151 mm - Ripping depth: 340 mm - Lifting height: 440 mm - Blade capacity: 2.4 m³ - Track shoes: 630 mm Working hydraulics by Linde Hydraulics, Aschaffenburg: - Electronic control of working hydraulics - Load-sensing variable pump - Return line filtration in tank - Blade shake function - Quick drop function for blade - Blade float function Hydrostatic drive from Linde Hydraulics, Aschaffenburg: - 3 adjustable speed ranges - Automatic parking brake - Electronic overload protection - Proportional travel joystick (hydraulic drive) - Hydrostatic travel drive - Machine release switch - Emergency stop button - Final drives with planetary reduction - Operator seat contact switch - 0–9.0 km/h (forward & reverse) Options: * Triple shank ripper for an additional €6,990 * Warranty extension 24 months / 3,000 operating hours for an additional €2,900 All prices plus VAT. More information at klarmann.de/shantui

Condition: used, power: 60 kW (81.58 HP), fuel type: diesel, color: yellow, overall weight: 7,300 kg, tire size: 14.9-24/6pr awt, Year of construction: 2007, operating hours: 990 h, machine/vehicle number: 1801169, Equipment: UVV, additional headlights, all wheel drive, cabin, traction control, Equipment / Technical data: - Gear stages 1 and 2 - Electric start - Frequency 29 Hz / 36 Hz - Amplitude 2 mm / 0.8 mm - Centrifugal force 138 kN / 84 kN - Centrifugal force/drum width 1,500 mm Gkolsyzm Tmjhcdw Njb - Compaction depth 650 / 500 mm - Working speed 6.9 km/h - Transport speed 11 km/h - Gradeability 60 % - Steering angle ± 28 degrees - Oscillation angle ±15 degrees - Inner turning radius 2,970 mm - Line load drum 20.6 kg/cm - Anti-slip system - Electronically controlled hydrostatic direct drive - Hydrostatic steering via two steering cylinders

Condition: excellent (used), power: 120 kW (163.15 HP), overall weight: 19,600 kg, chain condition: 75 %, Year of construction: 2018, operating hours: 3,155 h, Equipment: air conditioning, LIEBHERR PR726 LGP Year: 2018 Operation hours: 3.155 hrs. Gjlhcdozwd R Ejw Nokb ROPS Airco Radio Back drive camera U/C: approx. 70-80% good trackshoes: 810 millimeter width PAT -Blade 3 teeth ripper CE/ EPA Engine with 120 kW Transport: 7 x 3 x 3.35m Operation weight: 19.6 to

Condition: like new (used), functionality: fully functional, power: 151 kW (205.30 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 17,990 kg, operation weight: 17,990 kg, drive condition: 100 %, chain condition: 100 %, first registration: 09/2024, next inspection (TÜV): 09/2025, emission class: euro5, shovel volume: 3.22 m³, Year of construction: 2022, operating hours: 294 h, machine/vehicle number: HNNM000001, Equipment: UVV, additional headlights, air conditioning, cabin, hydraulics, onboard computer, soot filter, steel tracks, Price on request - Demo machine with only 250 hours Demo machine in like-new condition with 6-way foldable blade + 3 tooth ripper Transport width 2,999 mm This machine is fully equipped for 3D control. * Operating weight 17,990 kg Golhcjqnvqfedw Nekb * IVECO engine, 6-cyl., 6.7 l with 205 HP * Linde Hydraulics drive. more info at klarmann.de / shantui all prices + VAT, ex location Eltmann

Condition: like new (used), functionality: fully functional, power: 125 kW (169.95 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 13,700 kg, operation weight: 13,700 kg, drive condition: 100 %, chain condition: 100 %, first registration: 09/2024, next inspection (TÜV): 09/2025, emission class: euro5, shovel volume: 3 m³, Year of construction: 2023, operating hours: 135 h, machine/vehicle number: HNPM000001, Equipment: UVV, additional headlights, air conditioning, cabin, hydraulics, onboard computer, soot filter, steel tracks, DEMO – Machine with 135 hours for only €129,000 - Operating weight: 13,700 kg - ROPS/FOPS cab with air conditioning and heating - 3,300 mm PAT six-way dozer blade, foldable to 2,382 mm - IVECO 4-cylinder turbo diesel engine, 6.7 liters, Stage V, AdBlue - Power: 125 kW (170 HP) - Operating weight: 13,700 kg (with ripper +1,200 kg) - Machine width over tracks: 2,490 mm - Blade width: 3,300 mm - Blade height: 1,305 mm - Ripping depth: 500 mm - Dumping height: 600 mm Gkelhcdwol Uy Shs Nob - Blade capacity: 3 cbm - Track shoes: 560 mm - Working hydraulics by Linde Hydraulik, Aschaffenburg: - Electronic control of working hydraulics - Load-sensing variable pump - Return flow filtration in tank - Blade vibration function - Blade quick-drop function - Blade float function Hydrostatic drive by Linde Hydraulik, Aschaffenburg: - 3 adjustable speed ranges - Automatic parking brake - Electronic overloading limit control - Proportional drive joystick - Hydrostatic travel drive - Machine release switch - Emergency stop button - Planetary final drives - Seat contact switch 0–10.0 km/h (forward & reverse) All prices plus VAT. More info at klarmann.de/shantui

Condition: new, functionality: fully functional, power: 151 kW (205.30 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 17,600 kg, operation weight: 17,600 kg, drive condition: 100 %, chain condition: 100 %, emission class: euro5, shovel volume: 3.2 m³, Year of construction: 2022, operating hours: 65 h, machine/vehicle number: HNNM000002, Equipment: UVV, additional headlights, air conditioning, cabin, hydraulics, onboard computer, steel tracks, New machine: SHANTUI DH 16 M XL - 6-cylinder IVECO diesel engine Gkslsi Rtn Hjhcdw Nob - Stage V with 205 hp - Linde hydrostatic transmission from Aschaffenburg - 6-way blade - Transport width 2,600 mm - Track plates 560 mm - across the undercarriage - Blade width 3,305 mm folded 2,450 mm - Operating weight 17,665 kg Including factory warranty for 12 months or a maximum of 2,000 operating hours. You can make your machine even better – for an additional charge. Options: incl. folding blade to 2,450 mm Additional cost for: Ripper with 3 teeth (1,200 kg) Additional cost: + €9,200 Option: AGPS + Live Link for 1 year Additional cost: + €999 GA – Warranty extension for 24 months/3,000 operating hours Additional cost: + €3,700 Ex works location D - 97483 Eltmann