Used New Holland Skid Steer Loaders for sale (107)

Condition: used, Year of construction: 2018, operating hours: 1,860 h, power: 390 kW (530.25 HP), front tire size: Kette, rear tire size: 500/85R24, tire size: 500/85R24, Equipment: additional headlights, air conditioning, cabin, lighting, onboard computer, yield monitor with GPS, Tyres (front): track, Tyres (rear): 500/85R24, Operating hours: 1860, Drum/rotor hours: 1400, First registration: 2018, Horizontal header adjustment, Two-wheel drive, Performance monitor, Air-suspended seat, Radio, Reversing device, Rotor, Beacon, Straw chopper, Loss measurement, Hectare counter, Moisture measurement, Sieve box slope compensation_____Without header, Sieve box slope compensation, Autocontur, Straw chopper, GPS yield mapping, hectare counter, reverse camera, Storage location: Kundr Ibjdpfx Asyvrf Rjbqsb

Condition: good (used), power: 105 kW (142.76 HP), fuel type: diesel, Year of construction: 2008, operating hours: 10,849 h, New Holland MH Plus 2-way excavator Year of manufacture: 2008 10,825 operating hours Quick coupler with power tilt 3 buckets 105 kW = Further information = Year of manufacture: 2008 Iedpfx Ajzmr I Dobqsbb Drive: Wheeled Unladen weight: 22,000 kg CE marking: yes Technical condition: good Optical condition: good Damage: none Price: On request Please contact Klaas Gerrits, Peter Gerrits, or Mr. Gerrits for further information.

Condition: new, Year of construction: 2025, power: 40 kW (54.38 HP), motor manufacturer: New Holland, gearing type: mechanical, fuel type: diesel, maximum speed: 30 km/h, total height: 2,200 mm, total length: 3,500 mm, total width: 1,920 mm, = Additional options and accessories = - PTO = Remarks = Country of origin: India Displacement: 2,931cc Torque: 203 Nm @ 1400 rpm Dimension: 3,500 x 1,920 x 2,200 No. of cylinders / aspiration: 3 / naturally Capacity (cm³): 2931 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 40.25 / 54.0 Max. torque (gross) (Nm@rpm): 203 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Ibjdpfxsy Tyg Rs Abqob Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 0.96 Optional without creeper (F+R) 12+3 Speed range (kph) 2.0-29.74 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1400 Maximum lift capacity at ball ends with assist arms (kg) 1850 Engine speed at 540 rpm (rpm) 1967 PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3205/4200 Dimensions Overall length 2WD/4WD (mm) including FWC 3500 Overall width 2WD/4WD (mm) 1920 Height to top of exhaust 2WD/4WD (mm) 2200/2200 Wheelbase 2WD/4WD 2050/2005 Track width Front 2WD (mm) 1410-1710 Track width Front 4WD (mm) 1445-1875 Track width Rear Min. / Max. (all axle types) (mm) 1570-2100 Ground clearance under rear axle (2WD/4WD) (mm) 455/434 Weights Minimum weight 2WD/4WD (kg) (With ROPS & FWC 55Kg) 2200/2400 = More information = Drive: Wheel Number of cylinders: 3 Engine capacity: 2.931 cc GVW: 2.400 kg Wheelbase: 205 cm Engine type: New Holland S8000 Fuel tank: 60 litres Emission class: Euro 2

Condition: new, Year of construction: 2025, power: 40 kW (54.38 HP), motor manufacturer: New Holland, gearing type: mechanical, fuel type: diesel, = Additional options and accessories = - PTO = Remarks = Country of origin: India Displacement: 2,931cc Torque: 203 @ 1400 Nm @ rpm Dimension: 3,500 x 1,920 x 2,200 axle configuration: 2WD No. of cylinders / aspiration: 3 / naturally Capacity (cm³): 2931 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 40.25 / 54.0 Max. torque (gross) (Nm@rpm): 203 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 0.96 Optional without creeper (F+R) 12+3 Speed range (kph) 2.0-29.74 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1400 Maximum lift capacity at ball ends with assist arms (kg) 1850 Engine speed at 540 rpm (rpm) 1967 PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3205/4200 Dimensions Overall length 2WD/4WD (mm) including FWC 3500 Overall width 2WD/4WD (mm) 1920 Height to top of exhaust 2WD/4WD (mm) 2200/2200 Wheelbase 2WD/4WD 2050/2005 Track width Front 2WD (mm) 1410-1710 Track width Front 4WD (mm) 1445-1875 Track width Rear Min. / Max. (all axle types) (mm) 1570-2100 Ground clearance under rear axle (2WD/4WD) (mm) 455/434 Weights Minimum weight 2WD/4WD (kg) (With ROPS & FWC 55Kg) 2200/2400 = More information = Drive: Wheel Number of cylinders: 3 Engine capacity: 2.931 cc Isdpfx Abjy Tyg Doqobb GVW: 2.200 kg Wheelbase: 205 cm Engine type: New Holland S8000 Emission class: Euro 2

Condition: new, power: 55 kW (74.78 HP), fuel type: diesel, fuel tank capacity: 60 l, axle configuration: 4x4, emission class: euro2, Year of construction: 2025, Equipment: all wheel drive, = Additional options and accessories = - PTO = Remarks = Country of origin: India Displacement: 3,908cc Torque: 257 Nm @ 1400 rpm Dimension: 3,660 X 2,010 X2,400 Gearbox type: 8F + 2R partially synchromesh No. of cylinders / aspiration: 4 / naturally Capacity (cm³): 3,908 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 54.7/75 Max. torque (gross) (Nm@rpm): 257 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 1.03 Optional without creeper (F+R) 12+3 Speed range (kph) 2.14 - 31.85 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft Iodpsy Tyc Ssfx Abqjbb mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1500 Maximum lift capacity at ball ends with assist arms (kg) 2000 Engine speed at 540 rpm (rpm) 1967 PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3275/4200 = More information = Number of cylinders: 4 GVW: 2.700 kg Wheelbase: 216 cm

Condition: new, operating hours: 11,553 h, T 7050 Iodozt Tvijpfx Abqebb

Condition: used, Year of construction: 2023, operating hours: 369 h, power: 225 kW (305.91 HP), working width: 7,620 mm, Equipment: air conditioning, cabin, chaff cutter, compressed air brake, crop cutter, CX 6.90 Used New Holland combine harvester Drive axle with differential lock Drive axle Adjustable XHC axle for 500/85R24 Rear wheel tyres Additional attachments for XHC axle for 500/85 R 24 rear tyres TW 680/85R32 178A8 CHO AC70G (higher load index at lower tyre pressure) in combination with XHC axle and 500/85 R24 Overall width of 3.49 m with CX 6.80 and CX 6.90 SW 500/85R24-IMP-171A8 Wheel chocks Iedpfx Aezx H Amsbqsbb Compressed air system (FF) Hose and air blow gun FPT Cursor engine Portable service lamp 12V Hydraulics for hydraulic reel drive Sectional concave removal aid 30 KM/H travel speed Fire extinguisher at cab ladder Exterior mirrors, electrically adjustable Air-suspended deluxe comfort seat with additional comfort features Additional air-suspended comfort seat 3 cameras (reversing camera, camera on towing eye, and on grain tank auger) Automatic trailer hitch incl. power supply for header trailer Electronics for 3 cameras Automatic climate control Close-proximity mirror, right-hand side Bluetooth radio with AUX input Sun visor package for front and side windows LED lighting package including 12 LED headlights and LED grain tank lighting Additional handrail Driver's cab Access ladder Operator's manual in German TOP service sticker Additional lift cylinder for front attachments from 2,300 kg, required from HD Varifeed 6.71 m Hold-down shaft for guiding the elevator chain in the feeder housing Header drive 2HB Feeder housing with pivoting front plate, AutoFloat UltraFlow 600mm threshing drum with offset rasp bars and sectional concaves Centrifugal separator with Quattro drum Electric sieve adjustment from the cab Upper sieve Hart-Carter 1 1/8" for grain and SKH SmartSieve TripleClean sieve box with SKH SmartSieve Grain elevator Unloading auger 5.5 m Chaff spreader 4-row straw chopper with electrically adjustable straw deflectors Variable straw walker speed OptiSpeed Moisture measurement EZ-Pilot Pro antenna. EZ-Pilot Pro guidance system factory-installed. USB stick Telematics Telematics for 3 years EZ-Pilot Pro user instructions Including used 7.63 m HD Varifeed header Year of manufacture: 2023 Bolted short crop dividers Feeder plate Crop lifters Hydraulic rapeseed side knives, right and left Including used NH header trailer Year of manufacture: 2023 25 km/h Spare wheel, storage box