Used Claas Forage Wagons / Loader Wagons for sale (393)

Condition: used, Year of construction: 2018, operating hours: 1,415 h, Equipment: compressed air brake, CARGOS 9500 994-120-2018 Claas tridem forage wagon F02 0120 Rear section with 3 dosing rollers F04 0170 Dosing roller drive N08 0660 Tridem axle, axle load 30t, with hydraulic levelling N09 0110 Lift axle for front axle N10 0670 Tridem tyres 710/50 R 30.5 BKT Iodpfx Aasyy Tk Ajioat N12 0120 Air brake system for hydraulic chassis Q06 0250 OPERATOR (terminal) Q07 0100 ISOBUS cable Q12 0010 LED work lighting, 11 units R03 0140 Fill level sensor on tailgate R03 0190 Chute cover R03 0200 Load weight display R03 0220 Additional pressure roller for pickup, central S03 0210 Side marker lights

Condition: used, Year of construction: 2018, operating hours: 1,768 h, Equipment: compressed air brake, CARGOS 8500 0010 Used Claas CARGOS 8500 0020 Hydraulically folding cutting floor with central locking 0030 Knife pre-tension, mechanically adjustable 0040 Rear section with 3 dosing rollers 0050 Dosing roller drive 0060 Upper front flap, hydraulically folding 0070 Lower drawbar hitch, maximum support load 4 t 0080 6-piece wide-angle PTO shaft 0090 K80 ball-type hitch Iodpfx Aaey N E Rgeijat 0100 Forced steering, electronic-hydraulic 0110 Tridem axle, axle load 27 t, mechanically suspended 0120 Tridem tires 710/50 R26.5 0130 Air brake system for mechanical chassis 0140 2-speed scraper floor drive, rapid residual unloading 0150 ISOBUS cable 0160 Working lights 0170 Torque measurement in the drive train for loading automation 0180 Control line for load-sensing system 0190 Pickup suspension, hydraulically adjustable 0200 Silage additive dosing

Condition: used, Year of construction: 2018, operating hours: 5,120 h, CARGOS 9600 Used Claas forage wagon CARGOS 9600 Iaodpfx Aoy N E Nceaiet

Condition: used, Year of construction: 2016, operating hours: 2,443 h, CARGOS 9600 used Claas forage and silage wagon hydraulically folding cutting floor 3 dosing rollers hydraulic front wall side wall extension hydraulically suspended tridem axle tyres 750/45 R 26.5 Alliance LED lighting (11 units) torque measurement fill level sensor hydraulic pick-up unloading additional press roller total loads/carriages Iaedox S Snqspfx Aaiet

Condition: used, Year of construction: 2021, operating hours: 2,391 h, Equipment: compressed air brake, CARGOS 9500 0010 Used Claas Cargos 9500 forage wagon 0030 Underslung hitch K80, dual-circuit air brakes, 0040 Double wide-angle PTO shaft, 0050 Tridem axle, 30 tons with hydraulic compensation 0070 Lift axle for front axle, Isdpsyw Uvhjfx Aaijat 0080 Electronically-hydraulically controlled forced steering, 0090 Hydraulically adjustable pick-up suspension, 0100 Additional gauge roller, 0110 Torque sensor in the drive train for automatic loading control, 0120 Mechanically adjustable knife pre-tension, 0130 Hydraulically foldable knife floor, 0140 Hydraulically foldable front flap at top, 0150 Fill level sensor on tailgate, 0160 Rear section with 3 dosing rollers, 0170 Dosing roller drive, 0180 ISOBUS control system, 0190 Work lights, warning panels, 0200 Tires: 710/50 R30.5

Condition: used, Year of construction: 2016, Equipment: compressed air brake, Automatic dosing system Fold-down scraper floor 3rd jockey wheel under pick-up / 6905 loads Self-steering axle Drawbar suspension hydraulic Axle suspension / mechanical LoadSensing PickUp 40 knives Cutterbar LED light package / force measuring bolt for L Iajdpfx Aajtpn Tpoijt

Condition: new, Year of construction: 2006, operating hours: 2,840 h, Equipment: air conditioning, chaff cutter, crop cutter, LEXION 520 used Claas combine harvester front tires 650/75 R 32 rear tires 16.5/85-24 air conditioning Iaodpfxjy Su Ume Aaist straw chopper C 540 header with transport trolley

Condition: used, Year of construction: 2023, operating hours: 466 h, Equipment: front power take-off, ARION 550 CMATIC CEBIS used Claas tractor in standard configuration, additionally equipped with: LED Package Premium Iasdpoyxx Nnefx Aaijt - 4x LED driving lights, 2x work lights on the bonnet - LED work lights - Plus - LED working illumination - Premium Front tires: 540/65 R28 Vredestein Traxion+/solid rim Rear tires: 650/65 R38 Vredestein Traxion+/solid rim Front linkage and front PTO 2 front hydraulic couplers / 1 pressure-free return Transmission ratio 50 km/h PROACTIV front axle with wet disc brakes

Condition: used, Year of construction: 2025, operating hours: 384 h, Equipment: front power take-off, AXION 930 CMATIC CEBIS CLAAS tractor with standard equipment Connect Package II – Documentation, steering 5 + 2 electrohydraulic proportional control valves Mid-axle control units with FKH assignment & 1x double-acting front + 1x double-acting front Lower link stabilizers, hydraulic Iaedpfjyt Tdbox Aaijt Drawbar with hitch ball PTO 540 ECO + 1000 rpm PROFI CAM rear camera integrated in CEBIS, incl. 1 CPC Incab camera connection Data volume for RTK NET usage – 5 years 750/70 R44 VF Trelleborg TM1060 / fixed rim 650/60 R38 VF Trelleborg TM1060 / fixed rim Rear wheel weights, 974 kg for 42/44 inch tires

Condition: new, Year of construction: 2024, operating hours: 5 h, power: 158 kW (214.82 HP), Equipment: air conditioning, front power take-off, AXION 810 CMATIC CEBIS Claas Tractor Standard Equipment Digital Package II # CEMIS AUTO PILOT / GPS PILOT Ready Additional Interface Sockets Steering Interface Prepared Task Control Basic Activation, Tractor-side Machine Connect License # 5 years ISOBUS Preparation incl. ISO Socket at Rear CLAAS Remote Service incl. 5-year license Iodpoxbim Hsfx Aaioat CLAAS Communication Module (LTE) 2 Terminal Rails, Headliner and A-pillar CLAAS connect & 365FarmNet - XL Connected Documentation License # 1 year CEMIS 1200 Terminal GPS PILOT Activation # SAT 900 GNSS Receiver SAT 900 GNSS Receiver - RTK NET Unlock Initial Briefing & Commissioning Driver Package Premium Steering Wheel, Leather Automatic Climate Control, incl. Preparation Cat. 3 Electric Mirrors, incl. Wide-Angle Mirror Comfort Seat, Fabric, Semi-Active Longitudinal/Horizontal Suspension Rear Window 600/65 R28 Trelleborg TM800 / Fixed Rim / Wide Track Width 710/70 R38 Trelleborg TM 800 / Fixed Rim Electronic Hitch Control for Front Linkage CEMOS Demo Version # 400 h Data Volume for RTK NET Usage # 5 years PROFI CAM Rear Camera in CEBIS, incl. 1 CPC Incab Camera Connection Drawbar with Hitch Ball Power Take-Off 540 ECO RPM Without Radio

Condition: new, Year of construction: 2025, operating hours: 4 h, Equipment: cabin, compressed air brake, front-end loader, ARION 420 STAGE V ADVANCED Claas tractor Standard specification FLEXPILOT equipment package Front loader mounting console for FLEXPILOT (OC) Multifunction lever with FLEXPILOT 440/65 R28 Mitas AC 65 / Fixed rim 480/70 R38 Mitas HC 70 / Fixed rim Bonnet guard CIS, black-and-white control terminal Iasdpfx Aasyxh H Njist Air brake system (dual-circuit) Air brake system (dual-line) without hydraulic trailer brake 3 mechanical spool valves (OC), standard Pressureless return 6-post PANORAMIC cab PANORAMIC roof

Condition: used, operating hours: 3,919 h, Equipment: air conditioning, front power take-off, AXION 830 CEBIS (0010) Used Claas Axion 830 C Matic Cbis (0020) Standard equipment (0030) Tires: (0040) R 30 Vredestein (0050) R 42 Vredestein (0060) 4 double-acting rear spool valves (0070) Hydraulic top link rear (0080) ISOBUS (0090) Load Sensing (0100) Pressure-free return line rear (0110) Mechanical cab suspension (0120) Automatic drawbar (AHK) (0130) K80 hitch (0140) Front hydraulics (0150) Top link front Iaodpoy Svawsfx Aaijt (0160) LED lights front and rear (0170) Front axle suspension (0180) Continuously variable transmission (0190) Air suspension seat (0200) Radio (0210) Air conditioning (0220) ISOBUS terminal (0230) Multifunction armrest (0240) Cool box (0250) Passenger seat

Condition: used, Year of construction: 1995, operating hours: 4,650 h, power: 147 kW (199.86 HP), Equipment: cabin, chaff cutter, crop cutter, onboard computer, MEGA 204 CLAAS combine harvester Cab with heating On-board computer with hectare counter Isdpfoygy H Nex Aaisat Rear-view camera Straw chopper LED work lights Rotating beacon Maize equipment Front tires: 650/75 R32 Rear tires: 550/45-22.5 Claas header 4.50 m, foldable Machine is immediately ready for use – the following items have been repaired: - Wooden bearing replaced in 2024, intake chains replaced in 2023 - Axle newly bushed, elevator chains and beaters replaced - Concave and pre-concaves replaced

Condition: used, Year of construction: 2007, LINER 780 PROFIL used Claas twin rotor rake LINER 780 Profil hydraulic width adjustment lighting Ijdpsy Siykefx Aaijat swath curtain

Condition: used, Year of construction: 2018, operating hours: 5,802 h, power: 151 kW (205.30 HP), Equipment: air conditioning, compressed air brake, front power take-off, ARION 660 CMATIC CIS+ Used Claas tractor - Hydraulic system Load-Sensing 150 l/min - PROACTIV front axle with wet disc brakes Front tyres 600/65 R 28/30% Rear tyres 710/70 R38/60% Claas front linkage 4.0 t, front PTO ISOBUS ready Dual-circuit air brake system and 4 proportional control valves Central terminal mount Iaedpfxoy Siyqj Aaist Removable toolbox, left Additional headlights, 2x cab handle controls Automatic climate control, incl. preparation for

Condition: used, Year of construction: 2023, operating hours: 221 h, Equipment: crop cutter, QUADRANT 5300 EVOLUTION FC TANDEM 0010 Used Claas large square baler 0020 Lower hitch K80, PTO shaft, 0030 Input gearbox 1000 rpm, 0040 Hydraulic support leg, 0050 FineCut cutter rotor, 51 knives 0060 2-line pneumatic brake system, Iaodpfx Aaeyw Uvnjijt 0070 Tandem steering axle, leaf suspension, 0080 Pickup with gauge wheels, 0090 FINE CUT cutting unit, 51 knives, 0100 Moisture sensor, 6 knotters, 0110 Central lubrication, reversing camera, 0120 Knotter blower function, 0130 CEMIS 700 control terminal, 0140 Storage box, dust and waterproof, 0150 Tires: 620/50R22.5, 0160 221 operating hours, 11,592 bales

Condition: used, Year of construction: 2024, operating hours: 80 h, Equipment: compressed air brake, QUADRANT 5200 EVOLUTION FC TANDEM as QUADRANT 5200 FC - Gauge wheels for pick-up, oscillating and hydraulically foldable - LED work lights - 2 additional twine boxes, each for 6 rolls - Hydraulic folding for roller chute with weighing system - Folding via terminal for bale ramp with weighing system - PROFI CAM camera - Storage box 74 l, including accessories - Roller chute with 3 rollers and weighing system - ISOBUS machine - Pick-up with POWER FEEDING SYSTEM (PFS), working width 2.35 m - FINE CUT rotor with 51 knives (51-26-25-13-0) - Single wide-angle PTO shaft, 6-piece, 1 3/8" - Universal drawbar for bottom linkage - K80 ball hitch, MR version - Automatic overload clutch - Wheel covers for 620/50 R22.5 tyres - Tandem steering axle - Tyres 620/50 R22.5 - Dual-line air brake system for tandem steering axle 22.5" Isdpfx Aeyigy Sjaioat - Moisture sensor to determine residual moisture of material - Fire extinguisher 6 kg PR_B02 Pick-up with POWYSTEM (PFS), working width 2.35 m PR_C18 Harvesting equipment Plus PR_M16 K80 ball hitch, MR version PR_M18 Automatic overload clutch PR_N01 Wheel covers for 620/50 R22.5 tyres PR_Q05 Moisture sensor for determining residual material moisture

Condition: used, Year of construction: 2024, operating hours: 496 h, power: 151 kW (205.30 HP), Equipment: air conditioning, all wheel drive, cabin, compressed air brake, front power take-off, ARION 660 CMATIC CEBIS Claas all-wheel drive tractor in standard configuration T TD_B02 CLAAS Front Linkage 4.0 t including vibration damping TD_B12 Reinforcement frame transmission, engine side rails TD_I02 CEBIS control terminal with touch function TD_I04 CMATIC including engine speed memory plus CSM, CEBIS TD_I10 ISOBUS pre-installation, rear TD_I18 Task Control Basic activation, tractor side TD_I22 AUTO PILOT / GPS PILOT Ready TD_I24 SAT 900 GNSS receiver - RTK NET activation TD_I25 CLAAS communication module (LTE) TD_I28 CEMIS 1200 terminal TD_I29 ISOBUS activation for CEBIS TD_I38 Video function activation CEBIS + CPC Incab connection for 2 cameras TD_I40 Steering interface prepared TD_J02 Electronic linkage control (EHR), standard TD_J04 Lower links Cat. 3 with catch hooks TD_J06 Automatic lower link stabilizers TD_J10 Drawbar support with insert for swinging drawbar Iaodoyxx Nuopfx Aaijt TD_J12 Rear linkage with increased lift capacity TD_J16 Automatic piton fix with 38 mm pin diameter TD_J40 Dual-circuit air brake system TD_K02 Hydraulic system load-sensing 150 l/min TD_K12 Power-Beyond, LS connectors without flat face couplers TD_N02 CMATIC transmission, stepless TD_N04 Transmission ratio 50 km/h TD_N06 PROACTIV front axle with wet disc brakes TD_N10 PTO 540/540 ECO rpm TD_N46 Steering angle sensor for braked PROACTIV front axle TD_P02 209 hp max. power, 196 hp homologated nominal output, ECE R 120 TD_P06 Electronic main battery switch TD_P18 Fuel tank 370 l TD_Q02 4-post cab with 4-point suspension TD_Q04 Roof with roof hatch, opening to rear TD_Q06 Tinted rear window for 4-post cab TD_Q08 Rear window wiper TD_Q14 Electric mirrors, including wide-angle mirror TD_Q18 Mudguard extensions for 2.55 m external width, wheel diameter > 1.93 TD_Q20 2 terminal rails, roof liner and A-pillar TD_Q22 Removable toolbox, left side TD_Q30 Additional interface sockets TD_Q40 2 LED driving lights, A-post TD_Q50 Rear lights, standard, LED with warning panels TD_Q56 4x LED headlamps, 2x LED work lights on bonnet TD_Q58 LED work lights – Basic TD_R02 CEBIS TD_R04 Comfort seat, fabric, semi-active longitudinal/horizontal suspension TD_R06 Passenger seat with safety belt TD_R08 Automatic climate control, incl. Cat. 3 pre-equipment TD_R10 MP3 radio with Bluetooth, USB, SD, external mic and hands-free TD_R14 Cigarette lighter and ashtray TD_S06 2 LED beacons, foldable TD_102 600/65 R28 Trelleborg TM800 / fixed rim TD_103 650/65 R42 Trelleborg TM800 / fixed rim TD_B06 Front PTO 1,000 rpm TD_B08 Electronic position control for front linkage TD_B14 External operation for front linkage and front spool valve TD_I32 ELECTROPILOT reversible TD_J08 Hydraulic top link, catch hook Cat. 3 TD_J14 Swinging drawbar with ball hitch for standard drawbar support TD_K04 4 + 2 spool valves, electrohydraulic proportional (CEBIS) TD_K10 2 front connectors / 1 free return TD_Q60 LED work lights – Premium TD_SBL Digital Package III – CEMIS

Condition: used, Year of construction: 2024, operating hours: 164 h, DISCO 9200 C AUTOSWATHER 010 Used Claas disc mower 020 Large-area mower for rear tractor mounting, Cat. III 030 Working width 9.10 m (8.90 m) 040 Main frame optimized for center of gravity, angled backwards 050 Low-speed concept with reduced speed to 850 rpm 060 Tine conditioner with V-shaped, rubber-mounted steel tines 070 2 x swath belts 080 MAX CUT cutterbar – 2 x 8 mowing discs with integrated SAFETY LINK 090 ACTIVE FLOAT system, hydropneumatic suspension with active control 100 Wear skids 110 PTO shaft 1 3/8", 6-spline 120 ISOBUS control 130 Hydraulic folding mechanism Iasdpoy Six Hjfx Aaiot 140 Lighting 150 Warning sign

Condition: used, Year of construction: 2024, DISCO 3200 FC MOVE, used CLAAS disc mower for front mounting. Working width: 3.00 m. PTO shaft. Lighting system. Warning panel. Tine conditioner. Hydraulic ground pressure relief. Wear skids. Iedpoy Six Tsfx Aaisat

Condition: used, Year of construction: 2024, operating hours: 3 h, QUADRANT 5200 EVOLUTION FC TANDEM Claas large square baler in standard specification, additionally equipped with: Operator package - Hydraulic folding for bale/roller chute - LED work lighting - Battery cable - 2 additional twine boxes for 6 rolls each - Gauge wheels for pickup, pendulum-mounted and hydraulically foldable - PROFI CAM camera - 74 l storage box incl. accessories - Folding via terminal for bale ramp - CEMIS 700 FINE CUT chopping rotor with 51 knives Harvesting equipment Plus Universal drawbar for lower hitch Ball hitch K80, MR Moisture sensor for determination of residual material moisture Fire extinguisher 6 kg Isdpfx Aoyuqzyoaisat

Condition: used, Year of construction: 2014, Equipment: front-end loader, FL 120 used CLAAS front loader in standard configuration SHOCK ELIMINATOR – vibration damping EURO tool carrier Mechanical locking Quick coupling system Hydraulic function, incl. 2 ISO couplers Iaedpfx Aaoy Sckvjiet

Condition: used, Year of construction: 2011, operating hours: 1,761 h, power: 205 kW (278.72 HP), working width: 6,600 mm, Equipment: air conditioning, crop cutter, rape cutter, LEXION 620 used CLAAS combine harvester Laserpilot Dust extraction at feeder housing Cutterbar brake Grainmeter Quantimeter Lighting package I Ijdpfx Aajy Schzoieat GPS Fuel consumption measurement Automatic climate control Front tyres: 680/85 R32 Conti - 80% Rear tyres: 500/70-24 Conti - 50% Vario header 6.60 m Serial no.: 71613583 Rape equipment Transport trolley no.: 71918663

Condition: used, Year of construction: 2015, VOLTO 900 used CLAAS Volto 900 Three-point linkage 8 rotors Rotor diameter: 1.50 m Working width: 8.70 m Weight with standard equipment: 1,140 kg Hydraulic requirements: 1 single-acting incl. headland lift incl. PTO shaft Model year 2016 Iedpoy Sck Ajfx Aaijat

Condition: used, Year of construction: 2013, operating hours: 5,733 h, Equipment: air conditioning, all wheel drive, cabin, compressed air brake, front power take-off, AXION 810 CEBIS used Claas all-wheel drive tractor Year of manufacture: 2013 Mechanically suspended cab Isdpfox R Hvgjx Aaijat Automatic climate control Air-suspended seat 3 PTO speeds: 540/540E/1000 rpm HEXASHIFT transmission Load-Sensing 150 l/min 3+2 double-acting spool valves ELECTROPILOT Air brake system Suspended front axle Front linkage GPS Pilot S 10 RTK NET Automatic towing jaw K 80 swinging drawbar Hydraulic top link rear Mechanical top link front Front tyres: 600/65 R 28 fixed rim Rear tyres: 710/70 R 38 fixed rim All-wheel drive clutch defective