Used Eschlböck Agricultural Machines for sale (6)

Condition: used, Year of construction: 2010, _____6,500 operating hours, feed opening 98x60 cm, with Epsilon crane M70, reach 10 m. The machine is functional but various items will need to be repaired in the near future. Location: customer. Godpfx Ajv Dqifoaxebw

Condition: used, Year of construction: 2023, BIBER 6 ON AXLE ESCHLBÖCK WOOD CHIPPER Screen: 3 cm Single axle, max. 25 km/h, incl. lighting Top hitch Tire size: 10.0/75-15.3 10 PR Weight (standard configuration): 2650 kg Standard equipment: Wood chipping system: drum chipper Max. wood diameter: up to 32 cm Infeed opening: 32 x 49 cm Infeed conveyor chain: 0.5 m long Infeed table: total length incl. foldable tray: 153.5 cm Feed height: 73 cm Side feed-in Chipping drum with 4 quick-change knives Gjdpfsxpk Axex Aaxsbw Counter blade (split, double-sided usable) Drum diameter: 534 mm Easily exchangeable screens Chip lengths: 2, 3, 4, or 5 cm Supplied with 1 screen installed for desired chip length Independent hydraulic system with 90 l tank Hydraulic tank with fill level and temperature indicator for hydraulic oil 1 hydraulically pre-pressing feed roller and 1 feed chain belt Continuously adjustable feed speed Safety devices for hand feeding 3-sided stop bar in front of infeed chute Start/stop control and emergency stop on both sides Reverse function on control panel Sturdy transparent safety curtain Smart Control: Operator-guided feed speed control incl. visualization, adjustable chip length, and overload protection (no stress) Including hour meter (daily and total operating hours) Discharge: 2 discharge screws Blower diameter over 1 m Ejector spout rotatable 280° stepless, with adjustable ejector flap operable from the ground Discharge height from ground: 355 cm Drive: via PTO shaft (from approx. 40 kW up to max. 100 kW) PTO speed: 540 rpm Belt drive Drive shaft with overload and freewheel clutch Paintwork: RAL3020 traffic red A power socket (for forestry plug, 3-pin) must be installed on the tractor to ensure trouble-free power supply to the chipper.

Condition: used, Year of construction: 2023, Equipment: compressed air brake, BIBER 60 ZK Eschlböck chipper with 3 cm sieve Biber 60 ZK for crane loading with crane Epsilon C50F 86 > Chipping system: drum chipper Gjdpfx Aov H Smwsaxjbw > Wood diameter up to 40 cm > Feed opening 40 x 70 cm > Feed chain belt long (2 m) > Loading from the side > Chipping drum with 10 chipping knife blades offset in pairs > Counter knife (three-part) can be used twice > Drum diameter: 648 mm > Easily changeable sieves: 3 or 5 cm chip length > Series includes 1 sieve, installed for the desired chipping length > Discharge: screw discharge including clearing system, blower diameter approx. 1270 mm > Own hydraulic circuit with 220l hydraulic tank with level and temperature indicator for hydraulic oil > Reinforced hydraulic drive with gearbox assisted intake > Control panel for all functions: can be plugged into the machine, with cable remote control, can be mounted in the tractor cab > Intake belt and rocker can be operated electro-hydraulically > Smart control for controlling the intake speed including visualization, operator-guided control, adjustable chopping length and automatic overload (no stress) including operating hour counter (daily and total operating hours) > Discharge arch can be raised and folded down hydraulically, can be rotated continuously by 240° with adjustable discharge flap > Raise and lower intake trough > Drive: via the PTO (from approx. 80 kW to max. 150 kW) > PTO speed 1000 rpm > V-belt drive for SPC belts > PTO shaft with overload and freewheel clutch > Driving axle including lighting, hitch above or below, tire size 560/45 R 22.5 > Paintwork: RAL 3020 traffic red Crane Epsilon C50F86 > Max. reach 8.60 m > Net load moment 54 kNm > Net swivel moment 18 kNm > With foldable crane loading trough > Single axle 40 km/h or 60 km/h incl. 2-circuit compressed air brake > Automatic trailer coupling for compressed air-braked 2-axle trailer up to 8 t GG > Crane with support > Incl. 4-finger gripper HSP 020BIO HD and rotator > Danfoss control block with electric joystick, Prof 1 operation, 6 proportional and 2 black/white functions for hydraulic Support feet (cable remote control), > 2x LED headlights > Oil supply to the crane from the tractor, Oil requirement minimum 120 l /min. > Load-sensing control from the tractor required > Weight approx. 8230 kg Split beaver for beaver 60

Condition: used, Year of construction: 2023, BIBER 3-21 PTO Eschlböck Wood Chipper Weight approx. 1080 kg Standard Features Maximum wood diameter: 21 cm Feed width: 24 cm Disc chipper with Chipping disc diameter: 93 cm 3 chipping knives, 28 mm, re-sharpenable Counter knife + 2 lateral counter knives (wear and angle protection), reversible/two-way usable Grinding wheel mounted on the machine Independent hydraulic circuit Hydraulic tank: 35 liters 2 hydraulically driven hardened feed rollers 2 hydraulic motors and parallel mounting Hydraulic oil level and temperature display Chipping length adjustment Chipping length: 1 to 3 cm, adjustable electro-hydraulically 2 x 3 exchangeable stop plates in the disc and post-shredding comb for precise wood chips Smart Control Operator-guided control with visualization of feed speed, adjustable chipping length, and overload automatic system, incl. hour meter (daily and total hours) Mode selection for desired chip quality Safety features for manual feeding 2 control strips and one stop strip, release buttons and emergency stop on both sides Discharge chute 270° continuously rotatable with adjustable discharge flap, operable from the ground Gjdpfjxpkz Isx Aaxsbw Discharge height from ground: 3250 mm Drive via PTO shaft (30 up to max. 80 kW) PTO speed: 540, 750, 1000 PTO shaft with overload and freewheel clutch 3-point linkage Finish RAL 3020 traffic red RAL 7015 slate grey - Ex works Prambachkirchen / Austria - The following documents are supplied: - Operating manual - Spare parts list - Declaration of conformity - Tool kit Lighting for 3-point linkage

Condition: new, Year of construction: 2023, BIBER 3-21 PTO Eschlböck wood chipper Weight approx. 1080 kg Standard equipment Wood diameter up to 21 cm Feed width 24 cm Disk wheel chipper with Chipping disc diameter 93 cm 3 chipping knives 28 mm, can be resharpened Counter knife + 2 side counter knives (wear and angle protection), can be used twice Grinding disc on the machine Own hydraulic circuit Hydraulic tank 35 liters 2 hydraulically driven hardened Feed rollers 2 oil motors and parallel bearings Level and temperature indicator for Hydraulic oil Chipping length adjustment Chipping length 1 to 3 cm electro-hydraulic adjustable 2 x 3 interchangeable stop plates in Disk wheel and re-shredding comb for precise chips Smart Control Operator-guided control with Visualization of Feed speed, adjustable Chipping length and Automatic overload, including operating hour counter (daily and total hours) mode selection for desired wood chip quality safety devices for manual feeding Gbsdpfxjv H Smqs Aaxew 2 switch bars and a stop bar, release button and emergency stop on both sides discharge arch can be rotated continuously by 270 degrees with adjustable discharge flap, can be operated from the ground ejection height from the ground 3250 mm drive via the PTO shaft (30 to max. 80 kW) PTO speed 540, 750, 1000 cardan shaft with overload and freewheel clutch 3-point attachment paint finish RAL 3020 traffic red RAL 7015 slate grey - The following are also supplied: - operating instructions - spare parts list - declaration of conformity - report for obtaining the operating permit (only applies to attached work machines) - tool set lighting for the 3-point attachment

Condition: new, Year of construction: 2023, BIBER 6 ON SINGLE AXLE TRAILER Eschlböck Biber 6 on single axle trailer - 3 cm screen, - Eschlböck wood chipper - Single axle, 25 km/h, incl. lighting, top hitch, - Tire size: 10.0/75-15.3 10 PR, - Weight (standard equipment): approx. 2,650 kg Standard features - Chipping system: Drum chipper - Maximum wood diameter: 32 cm - Infeed opening: 32 x 49 cm - Infeed chain conveyor, 0.5 m long - Infeed table: length (incl. foldable loading tray): 153.5 cm, infeed height: 73 cm - Side feeding - Chipping drum with 4 quick-change knife blades - Counter blade (split design) with double-sided use - Drum diameter: 534 mm - Easily interchangeable screens: 2, 3, 4 or 5 cm chip length - Supplied as standard with one installed screen for desired chip length - Separate hydraulic circuit with 90 l hydraulic tank, including fill level and temperature indicators for hydraulic oil - 1 hydraulically pre-pressing infeed roller and 1 chain feeding conveyor - Continuously adjustable infeed speed - Safety features for manual feeding - Three-sided emergency stop bar in front of infeed chute - Release buttons and emergency stop on both sides - Reversing function at the control panel - Heavy-duty transparent safety curtain - Smart-Control: - Operator-guided control of infeed speed, including visualization, adjustable chip length and overload protection (no stress), including hour counter (day and total operating hours) - Discharge: - 2 discharge augers, blower diameter over 1 m - Discharge chute infinitely rotatable by 280° with adjustable discharge flap, operable from ground level - Discharge height from ground: 355 cm - Drive: via PTO (from approx. 40 kW up to max. 100 kW) - PTO speed: 540 rpm - V-belt drive - PTO shaft with overload and freewheel clutch - Paintwork: RAL 3020 traffic red A power socket (for forestry plug, 3-pin) must be installed on the tractor to ensure trouble-free power supply to the chipper. Gbjdpfxov H Sm Ds Aaxsw - Ex works Prambachkirchen / Austria Delivery includes: - Operating manual - Certificate for type approval (applies only to trailed working machines) - Tool kit