Car trailer

Neptun Pratik 2,02x1,14m 750kg Extras GN103

Condition: new, empty load weight: 110 kg, maximum load weight: 640 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,020 mm, loading space width: 1,140 mm, loading space height: 1,100 mm, total length: 3,020 mm, total width: 1,590 mm, tire size: 13 Zoll, color: grey, trailer brake: trailer unbraked, NEPTUN Praktik 202D GN129 Version 13 Inch - NEW VEHICLE - The Praktik 202D is an unbraked, single-axle box trailer for passenger vehicles with a permissible gross weight of 750 kg and a payload of approximately 640 kg (without superstructure). The Comfort Kit includes a high tarpaulin with frame and a jockey wheel. 🔧 Technical Specifications - Gross weight: 750 kg - Payload: approx. 640 kg - Dead weight: 110 kg - Tyres: 155/70 R13 (new tires) - Internal dimensions: 202 × 114 × 30 cm - Tarpaulin height: 80 cm (internal height approx. 110 cm) - External dimensions: 302 × 159 × 156 cm Psdpfxoxg Hwmo Ab Regp - Single axle, unbraked 🛠️ Construction & Features - V-drawbar with 3-profile construction - Maintenance-free rubber torsion axle with central support - Anti-slip, water-resistant multiplex floor (bolted) - Galvanized steel side panels with tarpaulin eyelets - Crossmember for extra stabilization - Reinforced rear cross member with side panel supports - 4 internal lashing eyes - Drop-down and detachable rear wall flap - Protected tail light unit, 7-pin electrical system - New large tension locks - Plastic mudguards - Rear stand → allows upright storage 🎁 Included in Comfort Kit - High tarpaulin (grey) + steel frame (80 cm) - Jockey wheel ➕ Optional accessories (at extra cost) - Foldable lashing eyes in the floor - Spare wheel + holder - Rear support stands 💶 Price €739 (instead of €1,169) — Save 37% >> Tarpaulin supplied for self-assembly or installed for an additional €20! Optional additional accessories available for a surcharge, e.g.: - Foldable lashing eye mounted in load floor - Spare wheel / front spare wheel holder - Set of rear support stands ! Many more trailers at >>> trelex.de ! * Financing and trade-in possible! * Huge selection: Over 300 trailers always in stock, come and visit us! * Expert and fair advice, fast processing. * Questions? Just give us a call! PLEASE NOTE: Immediate collection not possible without prior order!

Condition: new, empty load weight: 123 kg, maximum load weight: 627 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,006 mm, loading space width: 1,256 mm, loading space height: 777 mm, loading space volume: 1.4 m³, tire size: 13, wheelbase: 155 mm, color: grey, Year of construction: 2024, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK, AND THE NETHERLANDS. UT004501 The UNITRAILER Garden Trailer 201 TIPPING car trailer, with a GVWR of up to 750 kg, features a folding rear and front side panel, allowing for loading and unloading in just a few minutes! Thanks to the use of a tilting drawbar, it can be positioned vertically on the rear side panel at any point. All formalities related to the purchase will be taken care of for you. When ordering a car trailer, please specify the GVWR of the vehicle that will be used to tow the trailer. Available optional equipment: * additional side panels * high drop-side with tarpaulin, 80 cm * brackets for attaching tie-down straps * anti-theft device * spare wheel Technical data of the Garden Trailer 201 TIPPING car trailer: CHASSIS - steering axle from Knott or AL-KO Tire size: 155/70 R13 Tilting V-drawbar, which can be folded under the trailer's base plate at any time BODY - load-bearing frame made of hot-dip galvanized sheet steel Curved profiles are used with screws Loading area: non-slip and water-resistant screen-printed base plate, 9 mm thick SIDE PANELS - all side panels are made of galvanized steel. Total height of the side panels: 70 cm Pjdpfx Aeir H Rwjb Regp Shipping costs will be charged separately.

Condition: new, empty load weight: 218 kg, maximum load weight: 532 kg, overall weight: 750 kg, loading space length: 3,050 mm, loading space width: 1,660 mm, loading space height: 100 mm, loading space volume: 0.5 m³, color: other, construction height: 900 mm, working width: 2,150 mm, Manufacturer: Neptun Type: Multipurpose trailer GN152, N7-305 multi Permissible total weight: 750 kg Payload: 532 kg Unladen weight: 218 kg Box dimensions: 3050 x 1660 x 100 mm Tires: 155 70 R13 74N Loading height: 450 mm Tilting loading area - High structural strength due to a fully welded frame, cold-bent side panels of the U-profile frame, and 5 cross members. - Tilting platform facilitates loading and unloading. - Reinforced drawbar, individual wheel suspension, and axle rubber elements ensure safe and stable driving. - The platform of the 305 multi model has side-mounted tail lights, so when tilting backwards, the transported vehicle can be loaded directly without ramps. The platform threshold is only 4 cm. The following options are available: - 3-sided sideboards, height: 20 cm, made of 1.5 mm sheet metal and hot-dip galvanized. Pedpfsvdi Hvox Ab Rjgp - Leaf guard grid, 80 cm high. - Winch mounted on the front of the trailer for pulling heavy loads, vehicles, or quads, lifting element for tilting platform. Price includes vehicle registration document (Part II and COC papers). We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Cheval, Liberte, Hapert, Brian James Trailers. Upon request, we will provide you with a free temporary registration plate. We repair trailers from all manufacturers. Additional accessories are available on request. Subject to technical changes, price changes, and errors. No liability is accepted for errors and printing errors. Rubber spring axle, individual wheel suspension, and axle rubber elements ensure safe and stable driving, tilting loading area, support wheel, marker lights, hot-dip galvanized, braked, including warranty, high structural strength due to a fully welded frame, cold-bent side panels of the U-profile frame, and 5 cross members, tilting platform facilitates loading and unloading, the drawbar is reinforced, the platform of the 305 multi model has side-mounted tail lights, so when tilting backwards, the transported vehicle can be loaded directly without ramps. The platform threshold is only 4 cm.

Condition: new, machine/vehicle number: GN126, empty load weight: 148 kg, maximum load weight: 602 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,360 mm, loading space width: 1,290 mm, loading space height: 300 mm, Sideboards, railings, and more - 30 cm high steel sheet sideboards, single-walled - foldable and removable rear wall - with robust tensioning latches Podpoh Ewzlsfx Ab Regp - fixed front wall Attachment option for tarpaulins and nets - mounted attachment buttons for securing tarpaulins and nets Chassis and frame - tilting loading platform - V-shaped drawbar - tow ball coupling with safety indicator - stable frame with 2 continuous U-profiled longitudinal members and 3 cross members Loading platform and floor - continuous, non-slip, and waterproof screen-printed wood floor - 9 mm thick Lighting - modern multi-function lighting - with rear fog light - 7-pole plug Wheels and axles - robust rubber spring axle - maintenance-free compact wheel bearings - impact-resistant plastic fenders Lashing and securing options - 4 lashing eyes attached to the side wall Documents and freight costs - Freight costs to us are already included - incl. vehicle registration document (registration certificate part 2) - incl. COC document (EC certificate of conformity) - no further unwanted costs - Weight reduction possible for an extra charge (pure TÜV fee) Further offers and information can be found on our website. I am not allowed to provide a direct link, so simply enter "Dapper Anhänger" in your search engine. Photos may show optional accessories. Errors, changes, and prior sale are subject to change.

Condition: new, empty load weight: 120 kg, maximum load weight: 630 kg, overall weight: 750 kg, loading space length: 2,010 mm, loading space width: 1,060 mm, loading space height: 300 mm, tire size: 155/70R13, Small and maneuverable car trailer from trailer manufacturer TEMARED. The ECO2010KIPP open box trailer is ideal for private transportation and small loads. Pjdpfxsq Sly Uj Ab Rogp Garden waste, small furniture - everything you need for private or small commercial use. You can set up the trailer and fold down the drawbar to make it easier to store. The standard equipment of the steel trailer includes a support wheel, locks, galvanized side walls and a fold-down V-drawbar. This model is also available in different versions, for example as a cover trailer or tarpaulin trailer. We also offer trailer accessories such as attachments, tarpaulin and frame, flat tarpaulin, drawbar box and rear supports.

Condition: new, empty load weight: 122 kg, maximum load weight: 628 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,006 mm, loading space width: 1,256 mm, loading space height: 300 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, The Garden Trailer 201 KIPP car trailer from UNITRAILER with a maximum tare weight of up to 750 kg has a hinged rear dropside so that it can be loaded and unloaded in just a few minutes! By using a tiltable drawbar, it can be positioned vertically anywhere on the rear dropside. All formalities in connection with the purchase are taken care of for you. The ordered goods with enclosed documentation will be delivered to the address you specify in Germany/Austria within 3 to 7 working days. Once you have received the car trailer, all you have to do is register it. Pjdst I Ri Aepfx Ab Rjgp If you decide to purchase our new car trailer, you will receive a 2-year warranty. Each product comes with a user manual and a warranty booklet. All the most important documents come with the purchased trailer. In addition, you can purchase accessories in the form of drop sides, support wheels or anti-theft protection at any time. If you have any questions or doubts while using the car trailer, you can contact our specialists at any time. You can also use the tiltable drawbar to tilt your car trailer. This makes loading and unloading goods that you would normally have to lift or lower much more convenient. This solution is also most commonly found on more expensive car trailers, which contributes significantly to a better user experience. Another advantage of this solution is that the car trailer can be stored vertically, with the folded drawbar resting on the rear dropside. So you don't have to worry about the trailer taking up a lot of space in your garage or not fitting because of the protruding drawbar. You can even put it on the front of the building or wherever you want!

Condition: new, functionality: fully functional, empty load weight: 121 kg, maximum load weight: 629 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,010 mm, loading space width: 1,260 mm, loading space height: 300 mm, Year of construction: 2026, Scope of delivery: 1x Basic 201 Car Trailer – 750kg incl. jockey wheel – 201 x 126 cm with tilting drawbar Description: The Martz Basic 750kg Car Trailer is the ideal solution for all your transport needs. Whether you are disposing of garden waste, transporting building materials, or planning a move – this box trailer offers you the flexibility and durability you require. With a payload capacity of 629kg, you can easily transport heavy loads. The loading area measures 2010mm in length and 1260mm in width, providing ample space for a variety of goods. The trailer features a bolted steel frame for enhanced strength, while the floor is made from durable phenolic plywood, ensuring long-lasting performance even with intensive use. Practical features include a jockey wheel for easy maneuvering, as well as pre-installed cover buttons to simplify tarp attachment. The sidewalls, made of robust steel and 300mm high, provide additional protection for your cargo. The trailer is equipped with a V-shaped drawbar. With an overall length of 2910mm, overall width of 1690mm, and total height of 800mm, it is compact enough for easy storage and handling. Thanks to the practical tilting drawbar, the trailer can be stowed upright in your garage or carport to save space. Technical data: - Jockey wheel - Tilting drawbar Pgodpfx Aoxp Rv Ssb Rep - Fitted cover buttons Gross weight: 750kg Unladen weight: 121kg Payload: 629kg Loading area length: 2010mm Loading area width: 1260mm Overall width: 1690mm Overall length: 2910mm Overall height: 800mm Side wall height: 300mm Side wall material: Steel Manufacturer: Martz Connector type: 13-pin Trailer type: Box trailer with tilting drawbar Drawbar type: V-shaped (tiltable) Flooring: Phenolic plywood Frame type: Bolted Frame material: Steel Applications: Gardening, household use, relocations / furniture transport For even greater versatility, you can purchase optional accessories such as a mesh extension or extra side panels to tailor the trailer to your specific needs.

Condition: new, functionality: fully functional, empty load weight: 113 kg, maximum load weight: 637 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,010 mm, loading space width: 1,060 mm, loading space height: 300 mm, Year of construction: 2026, Scope of delivery: 1x Car trailer Basic 750kg incl. jockey wheel 1x Mesh side extension 40 cm (supplied disassembled; assembly available at extra cost) Description: The Martz Basic 750kg car trailer is the ideal solution for all your transportation needs. Whether you’re disposing of garden waste, transporting building materials, or planning a move, this box trailer offers the flexibility and durability you require. With a payload of 637kg, you can easily carry heavy loads. The loading area measures 2010mm in length and 1060mm in width, providing ample space for various goods. The trailer features a robust bolted steel frame to ensure additional strength. The floor is made of durable phenolic resin-coated plywood, designed to withstand intensive use. Practical features include a jockey wheel for easy maneuvering and pre-installed tarp buttons for fast and secure installation of a tarpaulin. The sidewalls are also made of sturdy steel with a height of 300mm, offering extra protection for your cargo. The trailer is equipped with a V-drawbar and a 7-pin plug, making it compatible with most vehicles. Its total length of 2910mm, overall width of 1490mm, and total height of 800mm make storage and handling convenient. For even greater versatility, the trailer comes with a 40 cm mesh extension, supplied disassembled. For an additional charge of €30, pre-assembly is available to further tailor the trailer to your specific needs. Order the Basic 750kg car trailer with jockey wheel and mesh extension now and discover its versatility and robustness! Technical specifications: - Jockey wheel - Pre-installed tarp buttons Gross weight: 750kg Unladen weight: 113kg Payload: 637kg Loading area length: 2010mm Loading area width: 1060mm Overall width: 1490mm Overall length: 2910mm Overall height: 800mm Sideboard height: 300mm Sideboard material: Steel Mesh extension height: 40 cm Pgodpfxoxp Ruus Ab Rjp Manufacturer: Martz Plug type: 7-pin Trailer type: Box trailer Drawbar type: V-drawbar Floor: Phenolic resin-coated plywood Frame type: Bolted Frame material: Steel Areas of application: Garden work, household use, removals / furniture transport

Condition: new, functionality: fully functional, machine/vehicle number: GN256, empty load weight: 290 kg, maximum load weight: 1,010 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,510 mm, loading space width: 1,480 mm, loading space height: 300 mm, Dropside, railing and co. - Side walls made of anodized aluminium 30 cm high, double-walled - with eccentric locks - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions Pgsdjrv Afuepfx Ab Rop - Quick conversion to a platform trailer - Sturdy and durable hinges Chassis and frame - Towing ball coupling with safety indicator - Hot-dip galvanized frame - Welded chassis with V-drawbar Loading area and floor - Continuous, anti-slip and waterproof screen-printed wooden floor - 12 mm thick Lighting equipment - Modern multifunctional lighting - with reversing light - with rear fog light - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse - Maintenance-free compact wheel bearings - with plastic mudguards - Wheel chocks with bracket Lashing and securing options - 8 recessed lashing brackets, integrated into the frame on the cargo bed Documents and freight costs - Freight costs to us already included - incl. vehicle registration document (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: used, Year of construction: 2022, operating hours: 175 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,320 mm, power: 36 kW (48.95 HP), tire condition: 100 %, front tire size: 300-15, rear tire size: 7.00-12, empty load weight: 4,350 kg, total length: 3,084 mm, color: other, maximum speed: 20 km/h, Attachments: Sideshift, Special equipment: 3rd valve, Half cab, Full free lift, CE certificate, Special equipment description: Front and rear lighting Description: The MSI 25 is a versatile mast truck and unique of its kind. It can be used in the wood and paper industry, in the recycling sector, for logistics applications, etc. Whether in the industrial building, in the yard or on light terrain, the hydrostatic transmission combined with the powerful engine and two large diameter drive wheels enable precise and smooth operation. This machine ensures daily productivity gains. For efficient maneuvering, the MSI 30 has a steering axle with integrated cylinder, which gives it a very tight turning radius. Thanks to the numerous attachments available, the MSI 30 is extremely versatile and is suitable for lifting, loading, unloading and storing long loads. It has a lifting capacity of 3.0 t. Pjdpjn Hzivofx Ab Rjgp