Car trailer

Brenderup Tieflader 2300S Stahl, 2,0 to. 3010x1530x400mm

Condition: new, empty load weight: 410 kg, maximum load weight: 1,590 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,010 mm, loading space width: 1,530 mm, loading space height: 1,200 mm, loading space volume: 5.4 m³, color: other, construction height: 1,740 mm, working width: 2,040 mm, Manufacturer: Brenderup Type: Brenderup 2300S, 2300STB2000 Low loader steel Perm. total weight: 2000 kg, braked tandem Payload: 1590 kg Unladen weight: 410 kg Box dimensions: 3010 x 1530 x 400 mm With foliage grid attachment 800 mm high Tires: 13 inch Loading height: 540 mm with folding front wall 13-pin plug incl. overrun brake with automatic reverse drive Price incl. vehicle registration document (registration certificate part II) and COC papers. Overrun brake with automatic reversing Price incl. vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints.automatic reverse drive, rubber spring axle, independent suspension, jockey wheel, marker lights, completely hot-dip galvanized frame, braked, incl. guarantee, Brenderup uses galvanized components that optimally protect the trailer against rust, robust angle lifting locks, V-safety drawbar, 6 x internal lashing eyes, braked, 13-pin plug with reversing light, protected rear light, free of charge. Plug with reversing light, protected multifunction light, 40 cm steel dropside, With 800 mm high leaf grate attachment Cjdpjuy Hwnsfx Akljhc

Condition: new, empty load weight: 170 kg, maximum load weight: 580 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,300 mm, loading space width: 1,260 mm, loading space height: 1,400 mm, total length: 3,210 mm, total width: 1,710 mm, tire size: R13, color: grey, trailer brake: trailer unbraked, Car Trailer ECO 2312 / 2612 with High Tarpaulin and Jockey Wheel Codevm Nurspfx Akljhc Box Trailer 750 kg, Steel, Single Axle, Unbraked - NEW VEHICLE - Complete package including: Tarpaulin / frame, 110 cm - Internal height from the loading floor approx. 130 cm at the sides, 140 cm in the center Tarpaulin color: GREY Jockey wheel Technical Data: Eco 2312 (base price): Permissible total weight: 750 kg, single axle, unbraked Unladen weight: 130 kg / approx. 180 kg with superstructure Payload up to 620 kg / approx. 570 kg with superstructure Internal box dimensions: 230 x 126 x 30 cm Overall dimensions (LxWxH): 321 x 171 cm Tyres: R13 Eco 2612 (70 EUR surcharge): Permissible total weight: 750 kg, single axle, unbraked Unladen weight: 146 kg / approx. 185 kg with superstructure Payload up to 604 kg / 565 kg with superstructure Internal box dimensions: 264 x 126 x 30 cm Overall dimensions (LxW): approx. 368 x 171 cm Tyres: R13 Trailer Equipment and Construction: Galvanised V-drawbar Maintenance-free rubber suspension axle Brand new tyres, plastic mudguards Phenolic plywood floor panel Galvanized steel sidewalls Tailgate foldable and detachable 12V electrics, 7-pin plug Multi-functional rear lights securely mounted in rear cross member Including German registration documents and COC Optional Accessories: Spare wheel Ramps for various purposes Rear support legs Anti-theft devices (various versions) Adapter for 13-pin car socket etc. (please inquire) ! Many more trailers at >>> trelex.de ! * Financing and trade-in possible! * Huge selection: Over 300 trailers always in stock, visit us! * Expert and fair advice, swift handling. * Any questions? Just give us a call!

Condition: new, functionality: fully functional, machine/vehicle number: GN131, empty load weight: 314 kg, maximum load weight: 968 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,630 mm, loading space width: 1,450 mm, loading space height: 400 mm, Equipment: uploader, Sideboards, railings, and more - Sideboards made of galvanized sheet steel, 40 cm high, double-walled - with tension locks - sideboards that can be folded down and removed on all sides - corner posts inserted - quick conversion to a platform trailer - stable and durable hinges Attachment option for tarpaulins and nets - mounted attachment buttons for securing tarpaulins and nets Chassis and frame - tow ball coupling with safety indicator - partially hot-dip galvanized - bolted chassis with V-drawbar - frame with two continuous U-profiled longitudinal beams and two cross members Loading platform and floor - continuous, non-slip, and waterproof screen-printed wood floor - 12mm thick Lighting - modern multi-function lighting - with reversing light - with rear fog light - 13-pin connector Wheels and axles - robust rubber spring axle - with automatic reversing function - maintenance-free compact wheel bearings - with plastic fenders - chocks with holder Lashing and securing options - 6 recessed lashing eyes, integrated into the frame on the loading platform Documents and shipping costs Chodpfsh Ewzhex Akloc - shipping costs to us already included - incl. vehicle registration certificate (Part 2) - incl. COC document (EC certificate of conformity) - no further unwanted costs - weight reduction possible for an extra charge (pure TÜV fee) You can find more offers and information on our website. I am not allowed to provide a direct link, so simply enter "Dapper Anhänger" in your search engine. Photos may show optional accessories. Subject to errors, changes, and prior sale.

Condition: new, maximum load weight: 549 kg, overall weight: 750 kg, axle configuration: 2 axles, loading space length: 2,500 mm, loading space width: 1,420 mm, loading space height: 350 mm, loading space volume: 1.4 m³, color: other, construction height: 960 mm, working width: 1,490 mm, Manufacturer: Brenderup Type: Brenderup 3251T, 3251ST UB flatbed trailer, steel Permissible total weight: 750 kg, tandem axle, unbraked Payload: 549 kg Unladen weight: 201 kg Box dimensions: 2500 x 1420 x 350 mm Tires: 10 inches Loading height: 610 mm All side panels can be removed and folded down Price includes vehicle registration document (registration certificate part II and COC papers) Cjdpfxed T Szuo Aklshc We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Unsinn and Neptun Upon request, we will provide you with a free temporary registration plate for transport. We repair trailers from all manufacturers. Further accessories available upon request. Subject to technical changes, price changes and errors. No liability is accepted for errors and printing errors. Rubber spring axle, support wheel, hot-dip galvanized, unbraked, including warranty. Brenderup uses galvanized components that optimally protect the trailer against rust. User-friendly latches, the tarpaulin buttons are attached to the trailer as standard. V-shaped drawbar, 4 x internally mounted lashing eyes, 13-pole plug with reversing light.

Condition: new, empty load weight: 680 kg, maximum load weight: 1,920 kg, overall weight: 2,600 kg, loading space length: 3,060 mm, loading space width: 1,800 mm, loading space height: 350 mm, tire size: 165r13c, Three-way tipper PW2.3E from the *trailer manufacturer* Cheval Liberte, also known as Debon. As a *flatbed trailer* and *three-way tipper*, it can be easily loaded from the side and rear thanks to the foldable and removable *side walls*. The load can be tipped from this *tipping trailer* using an *electric hydraulic system*. The *car trailer* is equipped with *aluminum side walls* that can be folded down on three sides and are all removable, *steel on wooden floor*, *electric hydraulic system* with battery, *automatic jockey wheel*, *H-frame*, *tie-down points*, welded *hot-dip galvanized frame*, and a *V-drawbar*. Chodpfji Awrqox Aklsc For an additional charge, tipper accessories such as a *leaf grid attachment*, *extension side walls*, *cover*, *flat cover, cargo securing net, battery charger, ramp rails*, and *rear supports* are also available.

Condition: new, functionality: fully functional, empty load weight: 364 kg, maximum load weight: 1,636 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,545 mm, loading space width: 1,510 mm, loading space height: 400 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ Flatbed Trailer 250/2 C 2T NEW VEHICLE Internal dimensions: 254cm x 151cm Side board height: 40cm Loading platform height: 71cm Total weight: 2000Kg Payload: 1636Kg Braked tandem-axle flatbed trailer Overrun brake and parking brake by KNOTT 2x 1000Kg axle and brake with reverse automatic Bolted and hot-dip galvanized steel frame Galvanized steel sheet side boards with safety latch Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed wood floor Support wheel 6x lashing eye 13" tire M+S tire Net/rope hook on the frame 13-pin connector Side marker lights at the front Rear lights with reversing light and triangular reflectors 2x U-shaped chock OPTIONAL ACCESSORIES, PERMANENTLY REDUCED IN PRICE, FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Integrated ramp, aluminum or steel Cjdpfeww A Dtjx Aklohc -Folding crank rear supports -Anti-theft device -Net with fine or coarse mesh -H-frame -Replace steel side boards with aluminum side boards -Leaf screen in various heights, also closed -Extension side boards, aluminum or steel -Flat cover with or without rail -High cover 140cm -Automatic support wheel Further accessories available on request! Plus freight to Gera and vehicle registration document 150 € net Pictures are for illustrative purposes and may show optional accessories that incur an additional charge. Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, including for caravans. Wide range of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers.

Condition: new, Year of construction: 2026, Rhinoceros XN 11 * Compact excavator Chjdpor Eyggsfx Aklsc * Mini excavator * Crawler excavator * Track excavator * Year of manufacture: 2026 * Operating hours: 0 * Overall dimensions: 2900mm x 930mm x 2500mm * Gross weight: 1,100 kg * Unladen weight: 1,020 kg * Engine power: 9 kW / 12 HP * Max speed: 5 km/h * Bucket capacity: 0.025 m³ * Rubber tracks * 360-degree rotation * Diesel engine * ROPS (rollover protection structure) * Dozer blade * Earth bucket * Hammer line * 3rd hydraulic circuit ATTENTION!!!!! PLEASE READ CAREFULLY!!!!! We expressly reserve the right to prior sale, as this item is also advertised on other platforms. We strongly recommend a viewing and inspection to avoid any misunderstandings about the condition or suitability for the buyer. Viewings and inspections are possible at any time by appointment and are expressly encouraged!!! Images may differ; may include optional accessories at an extra cost. The given internal dimensions are approximate values. For new vehicles, additional costs for vehicle documents and shipping may apply. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! EXCHANGES AND TOP-UP DEALS POSSIBLE!!! Showground: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. !!! Over 500 new and used trailers in stock at all times !!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, empty load weight: 304 kg, maximum load weight: 996 kg, overall weight: 1,300 kg, loading space length: 3,050 mm, loading space width: 1,660 mm, loading space height: 100 mm, loading space volume: 0.5 m³, color: other, construction height: 810 mm, working width: 2,260 mm, Manufacturer: Neptun, Type: Multipurpose trailer GN155, N13-305, multi, Permissible total weight: 1300 kg, braked, Payload: 996 kg, Tare weight: 304 kg, Box dimensions: 3050 x 1660 x 100 mm, Tires: 185 R14C, Loading height: 450 mm, Tilting loading area. - High structural strength due to a fully welded frame, cold-bent side panels of the U-profile frame and 5 cross members. - Tilting platform facilitates loading and unloading. - Reinforced drawbar, single-wheel suspension and axle rubber elements ensure safe and stable driving. - The platform of the 305 multi model has laterally positioned tail lights, so that when tilting backwards, the transported vehicle can be loaded directly without ramps. The platform threshold is only 4 cm. Chsdpjuy Hu Tsfx Akloc The following options are available: - 3-sided sideboards, height: 20 cm, made of 1.5 mm sheet metal and hot-dip galvanized - Leaf grid, 80 cm high - Winch mounted on the front of the trailer for pulling in heavy loads, vehicles or quads, lifting element for the tilting platform. Price includes vehicle registration certificate (Part II and COC papers). We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Cheval Liberte, Hapert, Brian James Trailers. Upon request, we will provide you with a free temporary registration plate. We repair trailers of all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability for errors and printing errors. Rubber suspension axle, single-wheel suspension and axle rubber elements ensure safe and stable driving, tilting loading area, support wheel, marker lights, hot-dip galvanized, braked, including warranty, high structural strength due to a fully welded frame, cold-bent side panels of the U-profile frame and 5 cross members, tilting platform facilitates loading and unloading, reinforced drawbar, the platform of the 305 multi model has laterally positioned tail lights, so that when tilting backwards, the transported vehicle can be loaded directly without ramps. The platform threshold is only 4 cm.

Condition: new, empty load weight: 252 kg, maximum load weight: 498 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,510 mm, loading space width: 1,280 mm, loading space height: 10 mm, Side walls, railings and more Integrated three-sided perforated railing Chassis and frame Tow-ball hitch with safety indicator Partially hot-dip galvanized Bolted and welded chassis Heavy-duty welded steel frame with integrated three-sided railing, 10 cm high, hot-dip galvanized and equipped with multiple robust lashing options Patented foldable license plate holder for improved handling Hydraulics (tilting and lowering function) Single-stage, double-chromed hydraulic cylinder with hand pump Chodpfowwm Dwsx Aklec Loading area and floor Split, anti-slip and waterproof phenolic plywood floor 15 mm thick Additional central lashing rail with 400 daN (tested according to DIN 75410-1) Lighting equipment Modern multifunction lighting With reversing light With rear fog light With outline marker lights for enhanced safety 13-pin plug, EC equipment Wheels and axles Pivoting axle with new kinematics Impact-resistant plastic mudguards Wheel chocks including mounted holder Lashing and securing options Numerous lashing points on the three-sided railing with 400 daN (tested according to DIN 75410-1)

Condition: new, functionality: fully functional, empty load weight: 468 kg, maximum load weight: 1,532 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,530 mm, loading space width: 1,520 mm, Year of construction: 2026, Scope of delivery: 1x Martz rear tipper trailer with steel floor and hand pump, 253x152 cm, 2000 kg Description: The Martz rear tipper trailer with hand pump is a robust transport solution for construction sites, gardening, and agriculture. Tipping, durable, and highly versatile. With a loading area of 253x152 cm and a total weight of 2000 kg, this trailer offers maximum flexibility and load capacity. The rugged welded construction made from hot-dip galvanized steel ensures longevity and stability. Features: - Tipping system: Equipped with a hand pump. - Versatility: All side panels are fully openable and removable, transforming the trailer into a flatbed trailer. - Robust design: Welded steel frame and aluminium side panels for high stability. - Twin axle: Designed for extreme loads and stability when transporting heavy goods. - Lashing rings: Integrated and recessed in the loading area. Technical data: - V-drawbar - Overrun brake - Wheel chocks with holder - Rubber suspension axle from Knott or Al-Ko - Hand pump Number of axles: 2 Tiltable: Yes Gross weight: 2000 kg Load area length: 2530 mm Load area width: 1520 mm Overall width: 1640 mm Overall length: 3910 mm Overall height: 1100 mm Side panel height: 300 mm Unladen weight: 468 kg Payload: 1532 kg Side panel material: Aluminium Frame material: Steel Floor material: Steel Chodpfx Asxmi Inoklsc Experience the versatility and reliability of the Martz rear tipper trailer – your partner for demanding transport requirements!