Other

Aluminium 2-Seiten Getreidekipper mit Plane

Overall weight: 18,000 kg, maximum load weight: 12,720 kg, axe configuration: 2 axles, first registration: 03/2018, next inspection (TÜV): 05/2025, Condition: used, Equipment: ABS, Dinke 2-axle trailer 2-sided grain tipper, spelt body AK 18/2, BPW axles, air suspension, disc brakes, aluminum rims, grain pusher, platform set, tarpaulin 1st hand Cifvm7H9R3 Next HU 05/25

Overall weight: 14,400 kg, maximum load weight: 10,400 kg, axe configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Condition: new, * ETK-TA-R 14.4: * EBS * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 to. Gigant axles * Parabolic springs with tandem compensation unit * Tire pressure monitoring with display option in the truck via EBS signal without installation on the truck * 300 mm height-adjustable drawbar with 40 mm flanged drawbar eye * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm on the right side * 15-pin power plug * Multi-chamber tail lights * Bolted underride guard * Plastic quarter mudguards * Mesh hooks at the side and rear in the bearings of the central locking system and 2 pieces on the bulkhead * Main frame made of fine-grained steel * Steel Pal.- 2-side tipper body Front wall made of smooth sheet metal, continuous side walls - can be folded down without center stanchions with dropside spring lifter - and swinging over manual central locking system Central locking * Bolted rear stanchions * Steel rear wall inserted in front of the ramps * 1 x 5 to. lashing ring in each corner Lashing ring in each corner and 4 x 3 to. lashing rings embedded in the outer frame * 4 mm floor made of fine-grained steel * Two-part mechanical grating drive-on ramps with aluminum top section 2,150 + 1,300 mm x 600 mm (can be pushed together manually up to 80 mm) * Chassis, drawbar, rear stanchions, underride guard, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoir, flanged drawbar and support winch painted black Bxhyljxz * Side walls and bridge in RAL 9010 pure white * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf on the A7

Overall weight: 14,400 kg, maximum load weight: 10,400 kg, axe configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Condition: new, * ETK-TA-R 14.4: * EBS * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 to. Gigant axles * Parabolic springs with tandem compensation unit * Tire pressure monitoring with display option in the truck via EBS signal without installation on the truck * 300 mm height-adjustable drawbar with 40 mm flanged drawbar eye * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm on the right side * 15-pin power plug * Multi-chamber tail lights * Bolted underride guard * Plastic quarter mudguards * Mesh hooks at the side and rear in the bearings of the central locking system and 2 pieces on the bulkhead * Main frame made of fine-grained steel * Steel Pal.- 2-side tipper body Front wall made of smooth sheet metal, continuous side walls - can be folded down without center stanchions with dropside spring lifter - and swinging over manual central locking system Central locking * Bolted rear stanchions * Steel rear wall inserted in front of the ramps * 1 x 5 to. lashing ring in each corner Lashing ring in each corner and 4 x 3 to. lashing rings embedded in the outer frame * 4 mm floor made of fine-grained steel * Two-part mechanical grating drive-on ramps with aluminum top section 2,150 + 1,300 mm x 600 mm (can be pushed together manually up to 80 mm) * Chassis, drawbar, rear stanchions, underride guard, mechanical drop supports and drive-on ramps hot-dip galvanized Gogoac * Axles, springs, air reservoir, flanged drawbar and support winch painted black * Side walls and bridge in RAL 9010 pure white * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf on the A7

Overall weight: 14,400 kg, maximum load weight: 10,400 kg, axe configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, Condition: new, * ETK-TA-R 14.4: * EBS Boc9Nt2Pfh9 * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 to. Gigant axles * Parabolic springs with tandem compensation unit * Tire pressure monitoring with display option in the truck via EBS signal without installation on the truck * 300 mm height-adjustable drawbar with 40 mm flanged drawbar eye * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm on the right side * 15-pin power plug * Multi-chamber tail lights * Bolted underride guard * Plastic quarter mudguards * Mesh hooks at the side and rear in the bearings of the central locking system and 2 pieces on the bulkhead * Main frame made of fine-grained steel * Steel Pal.- 2-side tipper body Front wall made of smooth sheet metal, continuous side walls - can be folded down without center stanchions with dropside spring lifter - and swinging over manual central locking system Central locking * Bolted rear stanchions * Steel rear wall inserted in front of the ramps * 1 x 5 to. lashing ring in each corner Lashing ring in each corner and 4 x 3 to. lashing rings embedded in the outer frame * 4 mm floor made of fine-grained steel * Two-part mechanical grating drive-on ramps with aluminum top section 2,150 + 1,300 mm x 600 mm (can be pushed together manually up to 80 mm) * Chassis, drawbar, rear stanchions, underride guard, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoir, flanged drawbar and support winch painted black * Side walls and bridge in RAL 9010 pure white * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf on the A7

Overall weight: 18,000 kg, maximum load weight: 14,800 kg, axe configuration: 2 axles, loading space length: 7,059 mm, loading space width: 2,480 mm, loading space height: 2,647 mm, first registration: 04/2004, Year of construction: 2004, Condition: used, Equipment: ABS, Manufacturer Leci Trailer Model 2 akslet BDF Anhänger mit plane koffer Year 2004 Condition Good Serial Number VV1LTR2EEFL112120 Ref. nr. 7543 Reg. date: 01-04-2004 Last seen: 0Lhqevs8 Drum brake: ? ABS: ? Rear axles: BPW Suspension: Air Tire Size: 235/70R19.5 Cover% left 40-60% Total weight: 18000 Kg Net weight: 3200 Kg Load capacity 14800 Kg Inside length: 7059 mm Internal width: 2480 mm Interior height: 2647 mm

Overall weight: 2,000 kg, empty load weight: 500 kg, maximum load weight: 1,500 kg, axe configuration: 2 axles, loading space volume: 8.9 m³, loading space length: 3,050 mm, loading space width: 1,600 mm, loading space height: 1,800 mm, color: grey, Condition: new, construction height: 2,460 mm, working width: 1,660 mm, Manufacturer: Hapert Type: High loader Azure H-2 Perm. weight: 2000 kg Payload: 1500 kg Empty weight: 500 kg Box dimensions: 3050 x 1600 x 300 mm with light grey tarpaulin and 180 cm bows Clearance height Tires: 175 70 R13 Loading height: 730 mm All drop sides can be folded down and removed Trailer and tarpaulin body is MADE IN GERMANY Special heights, different tarpaulin colors, sloping roof or aerodynamic front are available on request. Lettering in stencil screen or digital printing possible. We would be happy to make you an individual offer - Multiplex floor with 15 mm anti-slip coating. - TÜV-approved load securing system from Hapert: fixing brackets integrated in the side edge. - Designed dropside hinges for very easy attachment of a cargo net. - Solid fold-down support wheel. - V-drawbar. - 4 removable corner stanchions. - 30 cm high aluminum drop sides with robust built-in locks. - Hinged front wall. Tethering hooks on the chassis. - U-profile at the rear for easier attachment of the loading rails, - Chassis fully welded and fully galvanized. Price incl. vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints.automatic reverse drive, rubber spring axle, independent suspension, high tarpaulin, solid fold-down automatic support wheel, marker lights, chassis fully welded and fully galvanized, Braked, Incl. guarantee, Multiplex floor with 15 mm anti-slip coating, TÜV-approved load securing system from Hapert, Fastening brackets integrated in the side edge, Designed side wall hinges for very easy attachment of a cargo net, V-drawbar, 4 removable corner stanchions, 30 cm high aluminum side walls with robust built-in locks, Hinged front wall, Tethering hooks on the chassis, U-profile at the rear for easier attachment of the ramps Bnuwtstid89

Overall weight: 38,000 kg, empty load weight: 11,000 kg, maximum load weight: 27,000 kg, axe configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,550 mm, loading space height: 320 mm, suspension: air, color: grey-black, tire size: 235/75r17.5, Condition: new, Equipment: ABS, Front wall: -25 mm hollow aluminum profiles with integrated tarpaulin tensioning device -Sliding tarpaulin on both sides with welded-in vertical and horizontal straps and tensioning fasteners -Adjustable tarpaulin straps -Tarpaulin extension in the direction of travel: approx. 300 mm -Tarpaulin extension in height: approx. 750 mm -Incl. tarpaulins for loose tarpaulin extension section -1 pair of vertical tarpaulin pockets Rear wall: -steel rear portal frame with side tarpaulin attachment device -Aluminum double-wing door -Rear portal can be cranked out 1,250 mm on the left and right Front corner pillars: -at roof height, bolted on at the front Center pillars: -3 pairs of infinitely adjustable folding pillars -Center pillar in the low bed can also be fixed in the rear plateau Roof: -EDSCHA sliding roof (galvanized) with crossbar can be moved in 1 direction (pushed together to the front in the cargo area), without inclination -Rear portal crossbar can be swiveled away -PVC tarpaulin roof -Hydraulic lifting roof on both sides, lift approx. 300 mm -Lifting roof can be raised and moved -Cover can be slid over at the front and cranked out 900 mm at each end wall Chassis: -Welded steel frame construction -Low bed designed for 25 tons over 5 m -Replaceable 2" kingpin -Rear suspension rail for aluminum ramps 0A78Eym2 -Painted in MB 7350 nova gray -Galvanized -BPW axles -air suspension -9 tires, 235/75 R 17.5 Accessories: - Spare wheel holder -WABCO EBS brake system -ECAS system -AGS -Smartboard -Spring parking brake -Duomatic connections and standard connections -Sheet metal mudguards with splash guards -2 7-pin sockets -15-pin socket -2 5-chamber tail lights -RUL+holder -LED marker lights on the side -12 pairs of binding rings in the outer frame -6 pairs of mushrooms in the outer frame in the low bed Storage compartment with lid in the floor -4 wheel chocks + holder -2 ECE plates -2 pairs of extendable warning signs -1 piece of aluminum ladder with holder -2 rows of self-locking aluminum slats -Central lubrication system

Overall weight: 2,000 kg, empty load weight: 500 kg, maximum load weight: 1,500 kg, axe configuration: 2 axles, loading space volume: 8.9 m³, loading space length: 3,050 mm, loading space width: 1,600 mm, loading space height: 1,800 mm, color: other, Condition: new, construction height: 2,380 mm, working width: 1,660 mm, Manufacturer: Hapert Type: High loader Azure H-2 Perm. weight: 2000 kg Payload: 1500 kg Empty weight: 500 kg Box dimensions: 3050 x 1600 x 300 mm with anthracite tarpaulin and 180 cm bows Clearance height Tyres: 195 50 R13C Loading height: 640 mm All drop sides can be folded down and removed Trailer and tarpaulin body is MADE IN GERMANY Special heights, different tarpaulin colors, sloping roof or aerodynamic front are available on request. Lettering in stencil screen or digital printing possible. We would be happy to make you an individual offer - Multiplex floor with 15 mm anti-slip coating. - TÜV-approved load securing system from Hapert: fixing brackets integrated in the side edge. - Designed dropside hinges for very easy attachment of a cargo net. - Solid fold-down support wheel. - V-drawbar. - 4 removable corner stanchions. - 30 cm high aluminum drop sides with robust built-in locks. - Hinged front wall. Tethering hooks on the chassis. - U-profile at the rear for easier attachment of the loading rails, - Chassis fully welded and fully galvanized. Price incl. vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints.automatic reverse drive, rubber spring axle, independent suspension, high tarpaulin, solid fold-down automatic support wheel, marker lights, chassis fully welded and fully galvanized, Braked, Incl. guarantee, Multiplex floor with 15 mm anti-slip coating, TÜV-approved load securing system from Hapert, Fastening brackets integrated in the side edge, Designed side wall hinges for very easy attachment of a cargo net, V-drawbar, 4 removable corner stanchions, 30 cm high aluminum side walls with robust built-in locks, Hinged front wall, Tethering hooks on the chassis, U-profile at the rear for easier attachment of the ramps Beexqdpxl08

Overall weight: 11,900 kg, maximum load weight: 8,300 kg, axe configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Condition: new, Equipment: ABS, * Two-way tipper - ETK-TA-R 11.9 "Masterline" * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 5.5 to. BPW axles * Parabolic springs with tandem compensation unit * 300 mm height-adjustable drawbar with 40 mm flanged drawbar eye * Jost mech. support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm on the right side * 15-pin power plug * Multi-chamber tail lights Cgjt79Df2 * Bolted underride guard * Plastic quarter mudguards * Mesh hooks at the side and rear in the bearings of the central locking system and 2 pieces on the bulkhead, main frame made of fine-grained steel * Steel Pal. 2-side tipper body, continuous side walls -without center stanchions- can be folded down with dropside spring lifter * Bolted rear stanchions * Steel rear wall inserted in front of the ramps * 1 x 5 to. lashing ring in each corner Lashing ring in each corner and 4 x 3 to. lashing rings embedded in the outer frame, 4 mm sheet steel floor * Mechanical grating ramps approx. 2,750 x 600 mm (can be pushed together manually up to 30 mm) * Reinforced body with load securing certificate to EN 12642 XL Chassis * Drawbar, rear stanchions, underride guard, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoir, flanged drawbar and support winch painted black * New vehicle without initial registration with manufacturer's warranty * Color RAL 9010 pure white * Subject to errors and prior sale * available CW 40/2024 from Egestorf

Overall weight: 11,900 kg, maximum load weight: 8,300 kg, axe configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Condition: new, Equipment: ABS, * Two-way tipper - ETK-TA-R 11.9 "Masterline" * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 5.5 to. BPW axles * Parabolic springs with tandem compensation unit * 300 mm height-adjustable drawbar with 40 mm flanged drawbar eye * Jost mech. support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm on the right side * 15-pin power plug * Multi-chamber tail lights * Bolted underride guard * Plastic quarter mudguards * Mesh hooks at the side and rear in the bearings of the central locking system and 2 pieces on the bulkhead, main frame made of fine-grained steel * Steel Pal. 2-side tipper body, continuous side walls -without center stanchions- can be folded down with dropside spring lifter * Bolted rear stanchions Bg0Xgre22V * Steel rear wall inserted in front of the ramps * 1 x 5 to. lashing ring in each corner Lashing ring in each corner and 4 x 3 to. lashing rings embedded in the outer frame, 4 mm sheet steel floor * Mechanical grating ramps approx. 2,750 x 600 mm (can be pushed together manually up to 30 mm) * Reinforced body with load securing certificate to EN 12642 XL Chassis * Drawbar, rear stanchions, underride guard, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoir, flanged drawbar and support winch painted black * New vehicle without initial registration with manufacturer's warranty * Color RAL 9010 pure white * Subject to errors and prior sale * available CW 40/2024 from Egestorf

Overall weight: 11,900 kg, maximum load weight: 8,300 kg, axe configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Condition: new, Equipment: ABS, * Two-way tipper - ETK-TA-R 11.9 "Masterline" * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 5.5 to. BPW axles * Parabolic springs with tandem compensation unit 7Ulhjln703 * 300 mm height-adjustable drawbar with 40 mm flanged drawbar eye * Jost mech. support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm on the right side * 15-pin power plug * Multi-chamber tail lights * Bolted underride guard * Plastic quarter mudguards * Mesh hooks at the side and rear in the bearings of the central locking system and 2 pieces on the bulkhead, main frame made of fine-grained steel * Steel Pal. 2-side tipper body, continuous side walls -without center stanchions- can be folded down with dropside spring lifter * Bolted rear stanchions * Steel rear wall inserted in front of the ramps * 1 x 5 to. lashing ring in each corner Lashing ring in each corner and 4 x 3 to. lashing rings embedded in the outer frame, 4 mm sheet steel floor * Mechanical grating ramps approx. 2,750 x 600 mm (can be pushed together manually up to 30 mm) * Reinforced body with load securing certificate to EN 12642 XL Chassis * Drawbar, rear stanchions, underride guard, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoir, flanged drawbar and support winch painted black * New vehicle without initial registration with manufacturer's warranty * Color RAL 9010 pure white * Subject to errors and prior sale * available CW 40/2024 from Egestorf

Overall weight: 14,400 kg, maximum load weight: 10,870 kg, axe configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Condition: new, Equipment: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 to. Gigant axles * Parabolic springs with tandem compensation unit * 300 mm height-adjustable drawbar with 40 mm flanged drawbar eye * Jost mech. support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 650 x 350 x 320 mm at the front on the right side of the chassis * 15-pin power plug * Multi-chamber tail lights * Bolted underride guard * Plastic quarter mudguards * Mains hooks in the bearings of the central locking system and 2 pieces on the front wall * Chassis made of fine-grained steel * Steel Pal. 3-sided tipper body, continuous side walls at the top with inner tube reinforcement - without center stanchions, can be folded down with dropside spring jack * Bolted rear stanchions * Combination steel wing doors - rear wall 2-leaf asymmetrically divided - can be swivelled through 270° and locked - cannot be folded down - and with additional swing frame for automatic rear wall opening when tipping, locking via galvanized espagnolette lock at the rear and central locking, deactivation function for automatic rear wall function when tipping backwards with wing door open * 1 x 5 to. lashing ring in each corner Lashing ring in each corner and 4 x 3 to. lashing rings embedded in the outer frame * 4 mm sheet metal floor made of fine-grained steel * Rear mounting rail for the feeder ramps * Reinforced body - with load securing certificate * 1 pair of aluminum docking ramps approx. 3,570 x 410 mm (load capacity 10 to. / pair) suitable for rubber-tyred & tracked vehicles * Lockable storage compartment underneath the loading area recessed in the chassis for the ramps * Chassis, drawbar, underride guard, rear stanchion, rear folding supports hot-dip galvanized * Axles, springs, air reservoir and support winch painted black * Tires 285/70 19.5 * RAL color 9010 white * New vehicle with manufacturer's warranty * Subject to errors and prior sale Rbwf3Rp * Available immediately from Egestorf

Overall weight: 38,000 kg, maximum load weight: 27,000 kg, axe configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,550 mm, loading space height: 3,850 mm, first registration: 01/2019, suspension: air, color: grey, tire size: 235/75 R 17,5, Year of construction: 2019, Condition: used, Equipment: ABS, Chassis: -Welded steel frame construction with front and rear frame offset and drop center without rear chamfer -Frame neck + saddle plate 225 mm -Low bed designed for a point load of 25 tons over 5 m Outer frame closed on the outside with welded-in tie rings for lashing -Replaceable 2" kingpin -Rear end plate = underride guard -Rear suspension rail for aluminum ramps Axles, steering and tires: -BPW low-loader axles, 10 tons axle load each, bellows diameter 360 mm -Air suspension with lifting and lowering device, lift 260 mm (-60/+200 mm) -Wabco SmartBoard with ECAS function for 2 coupling heights + 100 mm -Cam brake 300/200 mm, asbestos-free brake linings -Automatic slack adjuster -IVTM tire pressure monitoring -1st and 2nd axle hydraulically forced-steered via fifth wheel coupling -9 steel disc wheels, 10-hole, with offset (132 mm), centered -9 tires 235/75 R 17.5, tubeless Mudguards: -Sheet metal mudguards with splash guards Brake system: -two-wire brake with EBS -EBS brake system (WABCO 4S2M) -Spring-applied parking brake -Duomatic connections and additional standard connections Electrical equipment: -Compliant with motor vehicle law -24 volts. 1x 15-pin + 2x 7-pin sockets -2 pcs. 5-chamber tail lights upright in cover plate -Holder for rotating beacon -Lateral marker lights Floor: Multi-layer glued panel floor, 27 mm thick, flush with outer frame and side rails. Bsjofgcedii -Reinforced with GRP coating on the underside. -12 pairs of binding rings welded into the outer frame -8 pairs of RUD 8 tons - 6 pairs in the low bed and one pair each at the end of the front high bed and at the start of the rear plateau - 2 pairs of lashing rings 4 tons each for the front high bed and rear plateau -6 pairs of mushrooms in the outer frame in the low bed -Storage compartment with lid in the floor of the front left and right low bed Front wall: -25 mm aluminum hollow profiles raised to the lower edge of the roof with integrated tarpaulin tensioning device. Sliding tarpaulins: -sliding tarpaulins on both sides with welded-in vertical and horizontal straps (approx. 600 mm apart) and stainless steel tensioning fasteners -adjustable tarpaulin straps (over dead center) up to loading width 4,000 mm including tarpaulin extension with press studs and Velcro fastener -Tarpaulin extension in the direction of travel: 300 mm, in height: 750 mm -Incl. eyelets for loose tarpaulin extension section (but without extension) -1 pair of vertical tarpaulin pockets with a length of approx. 1,000 mm, position in the low bed at the front offset -With belt pockets Rear wall: -steel rear portal frame with side tarpaulin attachment device -Aluminum double-wing door, 25 mm thick -Both door leaves fully hinged with door stop -One aluminum double-joint hinge and two recessed handles per door leaf -Rear portal can be cranked out 1,250 mm on the left and right Corner pillars at the front: -At roof height, screwed on at the front. Center pillars: -3 pairs of infinitely adjustable folding pillars -Columns can be moved along the entire length using a trolley -Center pillars can also be fixed to the rear plateau in the low bed Roof: -EDSCHA sliding roof (galvanized) with crossbar can be moved in both directions (pushed together at the front in the cargo area) -Rear portal crossbar can be swiveled away -PVC tarpaulin roof -Hand-operated hydraulic lifting roof on both sides, lift 450 mm -Lifting roof can be moved in the front (8x50) and rear (8x50) raised positions -Including tarpauli

Power: 352 kW (478.59 HP), overall weight: 35,000 kg, fuel type: diesel, color: white, axe configuration: > 3 axles, gearing type: automatic, Condition: new, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, X TO GO?EUROMIX TO GO? OFFERS YOU IMMEDIATELY AVAILABLE NEW STOCK VEHICLES, FROM OUR LOCATION IN PORTA WESTFALICA/GERMANY. FOR ALL CUSTOMERS WHO ARE IN AN ACUTE DEMAND SITUATION. (SHORT-TERM CAPACITY EXTENSION OR REPLACEMENT INVESTMENT)Your advantages: Complete vehicles ready for immediate use (concrete mixer/tipper)Immediate availability directly from the manufacturer * body, assembly, commercial vehicle * Best price/performance ratio * Financing options * Trade-in of your old vehicles MAN TGS 35.480 BB 8x4 EURO 6e EuromixMTP 2-sided tipper ( HARDOX ) - NEW NEW - withaut registration - without registration - ( rental possible ) Vehicle equipment * MAN D2676 LFAY diesel engine, 353 kW (480 hp) output, 2,450 Nm torque, Euro 6e * MAN TipMatic 12.28 OD - MAN TipMatic Offroad, TipMatic Efficiency, * 300 l tank capacity - 35 l tank capacity AdBlue tank * MAN EVBec high-performance engine brake, stepless * MAN EasyStart roll-away lock * Optional front axle tires 385/65R22.5 steering S+G TL * Optional rear axle tires 315/80R22.5 Drive S+G TL * Axle ratio, i=3.63 * Rear axle, 13,000 kg, AP axle - Front axle, 9,200 kg * Differential locks driven rear axles * Suspension type leaf/leaf (BB) on front axles and driven rear axles * Bumper, steel, 3-piece * Sun visor, in front of windshield * Windshield wiper actuation, automatic, with rain sensor (automatic wiper) * Daytime running lights, LED - High beam assistant - Working lights on rear cab, * Exterior rear-view mirror, electrically adjustable, heated * Driver's comfort seat, air suspension - Armrests on driver's seat * Multifunction steering wheel, height and tilt adjustable * Preparation for Toll Collect toll collection system * Digital tachograph with remote communication (in accordance with DSRC), CONTINENTAL * Moon Grey color ambience for cab interior * Air conditioning, manual * Lifting roof, mechanical - Rear wall of cab, with window * 2 sockets, cab roof storage, 12 V and 24 V * Traction control system (ASR) * Cruise control (FGR cruise control) * LDW lane departure warning system * 7-inch MAN Media System Advanced * MAN sound system Advanced - smartphone integration * Maximum vehicle noise level, 79 dB in accordance with UN/ECE-R 51.03 * Trailer coupling on end cross member, RINGFEDER type RF40/G150A Tipper equipment EuomixMTP two-way tipper EMK12- 14m³ - 16m³ - Type: EuromixMTP EMK2 Body description tipper body: Length: 5,900 mm Width: 2,410 mm Drop sides: 900 mm End wall: 1,100 mm Floor: 6 mm HARDOX 450 Drop sides: 5mm HARDOX 450 right: manual swinging dropside Rear wall : automatic pendulum 6mm HARDOX 450 Rear wall: 6mm S355 Auxiliary frames: Welded construction high quality steel Hydraulics: - Penta tipping cylinder with limit switch, - control block (main valve) - pneumatic tipping sensor - pneumatic changeover valve on subframe - pump and oil tank Options : Hydraulic connection tipping trailer Broom and bucket with holder Folding underride guard at ground level, folding lashing eyes EuromixMTP hydraulically operated, Drop sides Lashing eyes in the corners tarpaulin DURABLE AND ROBUST FOR YOU IN USE! If you have any further questions, our team is available in the following languages. * We speak German * We speak English * Nous parlons français * Mówimy po polsku Urgwxydktr * ?? ????? ?? ????? * Govorimo Srpskohrvatski

Mileage: 253,900 km, power: 375 kW (509.86 HP), first registration: 07/2017, overall weight: 32,000 kg, fuel type: diesel, color: orange, axe configuration: > 3 axles, next inspection (TÜV): 07/2025, brakes: retarder, gearing type: automatic, emission class: euro6, Condition: used, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, * Top condition * Vehicle from our own fleet - currently registered and still being driven * Delivery possible at any time * Pickerl until 7/25 * All tires as good as new, NO damage or defects, many new parts installed * 2 sides rock tipper with Bordmatik on the left Bei0I9A * Retarder * AHK * Euro 6 * Fleetboard * Stappel battery box * Storage box left and right under tipper body * Seat heating * Air conditioning * Cool box * Exhaust tailpipe upwards * 320LT tank * Rotating light bar * Cab Classicspace M tunnel 170mm * . * Info: Subject to prior sale - All information WITHOUT guarantee!!!

Mileage: 443,321 km, power: 330 kW (448.67 HP), first registration: 08/2013, overall weight: 41,000 kg, fuel type: diesel, color: blue, axe configuration: > 3 axles, brakes: retarder, gearing type: automatic, Condition: used, Equipment: ABS, air conditioning, Special equipment: Trailer coupling: Rockinger towing hitch, Audio system: CD radio (Bluetooth), Exhaust raised behind cab, variable, Battery 220 Ah, CB radio, Compressed air connection in cab, Compressed air horn, Cab: steel-sprung, Comfort, Vehicle without rear underride guard, Noise level 80 dB(A), Gearbox 12-speed - type: G 330-12, Cabin filter for construction site vehicles, Fuel tank: 320 ltr. aluminum, left, reinforced engine brake, spare wheel, retarder, reversing alarm acoustic (warning signal outside), disc brakes with full protection, disc brakes front and rear axle, power steering Servotwin, seats in cab: driver's seat swing seat comfort, sun visor outside, voltage converter 24V / 12V 10 A, steel rims 11.75x22.5 (on front axle), storage flap outside left, socket 24V in passenger footwell additional Further equipment: EURO 6 emissions standard, ABS can be switched off, axle configuration: 8x4/4, axle load front axle 7.5 t, Arocs, exterior mirrors electr. Adjustable and heatable exterior mirrors, Batteries arranged one above the other, Rear axle differential lock, Steel compressed air tank, Low compressed air unit, Cab: width 2.30 m, Cab: movable cab access, Cab: hydraulic tipping device, Cab: M ClassicSpace, Cab floor with engine tunnel 170 mm, Suspension: leaf / leaf, Suspension: rear springs 2x15.0 t, Suspension: front springs 7.5 t, 3 leaf, Electric windows, Tinted windshield, Generator 100 A, Urea tank (AdBlue): 25 ltr., rear axle ring gear 300, info display 10.4 cm, cabin filter: pollen filter, body/structure: tipper, comfort locking system, unregulated power steering pump, air compressor 2-cyl, heated air dryer, engine 12.8 ltr. - 330 kW R6 diesel (OM 471), auxiliary drive MB 131-2c, wheelbase 4250 mm, ramp mirror, residual heat utilization, rear window, seat cover / upholstery: fabric, seats in cab: passenger function seat, stabilizer rear axle, stabilizer front axle, tachograph / EC control unit, fixed rear underride guard, preparation for toll collection, straight front axle, regulated water pump, gross vehicle weight 41.00 t, oil cooler transmission Cccpdfg * FIN : WDB9642311L777578 * First registration : 30.08.2013 * Net price

Condition: new, Year of construction: 2024, color: orange, overall weight: 15,000 kg, loading space volume: 13 m³, loading space width: 2,400 mm, loading space length: 6,750 mm, loading space height: 800 mm, AVAILABLE IMMEDIATELY ? PRICE PER PIECE1 roll-off container in accordance with DIN 30722-1 with ALU side walls and tarpaulin framePaddle tipper body type K 23 sInternal dimensions: approx. 6.75 x 2.42 x 0.8 meters all dimensions are approximateUseful capacity: approx. 13 m³Paint finish: RAL 2011 (deep orange)? Support fittings for hook systems to DIN 30722-1 (15,000 kg) with rear steel outer castors and INP 180 subframe Outer castors can be lubricated and replaced Support bracket Ø 50 mm, hook height 1,570 mm? Inner front wall height approx. 2,400 mm? Floor pan made of 5 mm St 37.2 (S235JR)? Floor frame spacing 750 mm frame profile U 80 x 50 mm? ALU side walls, side height approx. 0.8 meters, fold-down and removable, 2 x divided in the middle by removable central stanchions? 8 heavy-duty lashing eyes recessed in the floor, 2.5 t each? 8 lashing rings / lashing eyes recessed in the floor, 5 t each, for lashing the SWINGO over the wheels using tension belts? Tailgate can be folded down and driven over up to 4.5 t? Tailgate made of profiled aluminum and spring-loaded? Removable tarpaulin frame 2,300 mm high inside, made of profile tubes? Tarpaulin made of high-quality 680gr/m² &#8211 PVC material? All attachment points of the tarpaulin reinforced on the tarpaulin frame? Tarpaulin attached to the side of the dropside with rubber expanders and to the front and rear with lasso fasteners? Tarpaulin and net hooks all round? Container primed once on the inside, primed twice on the outside and painted twice in one color on the outside? UVV stickers with safety instructions? Container tested and approved according to UVV (formerly BGR 186)Offer subject to change, without guarantee or warranty. Subject to prior sale. The purchase is only concluded upon receipt of payment. The vehicle remains our property until full payment has been received. We only accept payments in Euro without additional costs for the seller and only by bank transfer or cash payment. No checks. Prices are quoted per unit &nbsp Udyvquiokb

Overall weight: 14,400 kg, maximum load weight: 10,870 kg, axe configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Condition: new, Equipment: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 to. Gigant axles * Parabolic springs with tandem compensation unit * 300 mm height-adjustable drawbar with 40 mm flanged drawbar eye * Jost mech. support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 650 x 350 x 320 mm at the front on the right side of the chassis * 15-pin power plug * Multi-chamber tail lights * Bolted underride guard * Plastic quarter mudguards * Mains hooks in the bearings of the central locking system and 2 pieces on the front wall * Chassis made of fine-grained steel * Steel pallet 3-sided tipper body, continuous side walls at the top with inner tube reinforcement -without center stanchions- can be folded down with dropside spring lifter, rear stanchions screwed, combi steel wing doors rear wall 2-wing asymmetrically divided- can be swiveled and locked by 270° -not foldable- and with additional pendulum frame for automatic rear wall opening when tipping, rear wall can be folded down, with additional swing frame for automatic rear wall opening when tipping, rear wall can be folded down with spring lifter. Locking via galvanized espagnolette lock at the rear and central locking, deactivation function for automatic rear wall function when tipping backwards with the wing door open * 1 x 5 to. lashing ring in each corner Lashing ring in each corner and 4 x 3 to. lashing rings embedded in the outer frame * 4 mm sheet metal floor made of fine-grained steel * Rear mounting rail for the feeder ramps * Reinforced body - with load securing certificate * 1 pair of aluminum trailer ramps approx. 3,570 x 410 mm (load capacity 10 to. / pair) suitable for rubber-tyred & tracked vehicles Lockable storage compartment underneath the loading area recessed into the chassis from the rear * Chassis, drawbar, underride guard, rear stanchion, rear folding supports hot-dip galvanized * Axles, springs, air reservoir and support winch painted black * Tires 285/70 19.5 * RAL color 2011 orange * New vehicle with manufacturer's warranty Buojtum2 * Subject to errors and prior sale * immediately available from Egestorf

Overall weight: 750 kg, empty load weight: 190 kg, maximum load weight: 560 kg, operation weight: 750 kg, loading space length: 2,641 mm, loading space width: 1,256 mm, loading space height: 1,500 mm, tire size: 155/70 R13, Year of construction: 2024, Condition: new, 2-axle car trailer Garden Trailer 264/2 with accessories We offer you the largest lightweight car trailer with a transport area of 264 x 125 cm, with which you can transport loads with a very large volume. The Garden Trailer 264 model is a trailer that will make all your transportation tasks easier. Do you want to transport a large amount of wood? No problem! New household appliances, electronics or furniture? Nothing could be easier! You can transport everything you need yourself, and loading and unloading is made easier by an inclined drawbar. Car trailer Unitrailer Garden Trailer 264/2 KIPP - Advantages and technical data A very wide transport area that facilitates the transportation of bulky goods Complete zinc protection against corrosion Above-average durability thanks to additional support beams under the floor and frame reinforcements Dpfzrb Active marker lights make it easier to read the trailer position when reversing Highly durable, corrosion-resistant plastic mudguards Rear lighting protected from damage the option of placing the trailer on its back, which means it takes up very little space during storage Wheels attached to the sides of the transport area ensure a lower center of gravity, better handling and no bouncing of the trailer even when driving unloaded

Power: 352 kW (478.59 HP), overall weight: 35,000 kg, fuel type: diesel, color: white, axe configuration: > 3 axles, gearing type: automatic, Condition: new, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, X TO GO?EUROMIX TO GO? OFFERS YOU IMMEDIATELY AVAILABLE NEW STOCK VEHICLES, FROM OUR LOCATION IN PORTA WESTFALICA/GERMANY. FOR ALL CUSTOMERS WHO ARE IN AN ACUTE DEMAND SITUATION. (SHORT-TERM CAPACITY EXTENSION OR REPLACEMENT INVESTMENT)Your advantages: Complete vehicles ready for immediate use (concrete mixer/tipper)Immediate availability directly from the manufacturer Bk3Axh7M9Hn * body, assembly, commercial vehicle * Best price/performance ratio * Financing options * Trade-in of your old vehicles MAN TGS 35.480 BB 8x4 EURO 6e EuromixMTP 2-sided tipper ( HARDOX ) - NEW NEW - withaut registration - without registration - ( rental possible ) Vehicle equipment * MAN D2676 LFAY diesel engine, 353 kW (480 hp) output, 2,450 Nm torque, Euro 6e * MAN TipMatic 12.28 OD - MAN TipMatic Offroad, TipMatic Efficiency, * 300 l tank capacity - 35 l tank capacity AdBlue tank * MAN EVBec high-performance engine brake, stepless * MAN EasyStart roll-away lock * Optional front axle tires 385/65R22.5 steering S+G TL * Optional rear axle tires 315/80R22.5 Drive S+G TL * Axle ratio, i=3.63 * Rear axle, 13,000 kg, AP axle - Front axle, 9,200 kg * Differential locks driven rear axles * Suspension type leaf/leaf (BB) on front axles and driven rear axles * Bumper, steel, 3-piece * Sun visor, in front of windshield * Windshield wiper actuation, automatic, with rain sensor (automatic wiper) * Daytime running lights, LED - High beam assistant - Working lights on rear cab, * Exterior rear-view mirror, electrically adjustable, heated * Driver's comfort seat, air suspension - Armrests on driver's seat * Multifunction steering wheel, height and tilt adjustable * Preparation for Toll Collect toll collection system * Digital tachograph with remote communication (in accordance with DSRC), CONTINENTAL * Moon Grey color ambience for cab interior * Air conditioning, manual * Lifting roof, mechanical - Rear wall of cab, with window * 2 sockets, cab roof storage, 12 V and 24 V * Traction control system (ASR) * Cruise control (FGR cruise control) * LDW lane departure warning system * 7-inch MAN Media System Advanced * MAN sound system Advanced - smartphone integration * Maximum vehicle noise level, 79 dB in accordance with UN/ECE-R 51.03 * Trailer coupling on end cross member, RINGFEDER type RF40/G150A Tipper equipment EuomixMTP two-way tipper EMK12- 14m³ - 16m³ - Type: EuromixMTP EMK2 Body description tipper body: Length: 5,900 mm Width: 2,410 mm Drop sides: 900 mm End wall: 1,100 mm Floor: 6 mm HARDOX 450 Drop sides: 5mm HARDOX 450 right: manual swinging dropside Rear wall : automatic pendulum 6mm HARDOX 450 Rear wall: 6mm S355 Auxiliary frames: Welded construction high quality steel Hydraulics: - Penta tipping cylinder with limit switch, - control block (main valve) - pneumatic tipping sensor - pneumatic changeover valve on subframe - pump and oil tank Options : Hydraulic connection tipping trailer Broom and bucket with holder Folding underride guard at ground level, folding lashing eyes EuromixMTP hydraulically operated, Drop sides Lashing eyes in the corners tarpaulin DURABLE AND ROBUST FOR YOU IN USE! If you have any further questions, our team is available in the following languages. * We speak German * We speak English * Nous parlons français * Mówimy po polsku * ?? ????? ?? ????? * Govorimo Srpskohrvatski

Overall weight: 22,000 kg, axe configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,500 mm, loading space height: 1,100 mm, first registration: 01/2002, suspension: air, Year of construction: 2002, Condition: good (used), Functionality: fully functional, Anhänger Bartoletti 22RFM Dorjcz 2-Seiten-Kipper 7.30m lang/ 2.50m breit/ 1.10m hoch luftgefedert 2 Achsen zGG 22,000kg - Nutzlast 16,750kg Total-Länge Anhänger mit Deichsel 9.36m Reifen 50% (315/80R22.5) zwilingsbereift Exportnettopreis 6,500.00Euro alle Angaben ohne Gewähr/Irrtum vorbehalten

Mileage: 379,100 km, power: 368 kW (500.34 HP), first registration: 11/2017, overall weight: 26,000 kg, fuel type: diesel, color: beige, axe configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Condition: used, Equipment: ABS, air conditioning, crane, parking heater, soot filter, Scania R500 building material with Schwarzmüller 2-sided tipper Bri3Sadydy Crane: Fassi F215 AS with 2 hydraulic extensions, stone tongs and high seat !!! REAR AXLE STEERED !!! Retarder, sun visor outside, lane assistant, cruise control, trailer coupling, aluminum rims, cool box, 1x couch, multifunction steering wheel, differential lock, auxiliary heating, radio with Bluetooth and hands-free system, EURO 6, ABS, 2xel. Power windows, el. mirrors. Front axle: AIR-SUSPENSION Rear axle: AIR-SUSPENSION Trailing axle: AIR-SUSPENSION + articulated + LIFTABLE

Overall weight: 14,400 kg, maximum load weight: 10,870 kg, axe configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Condition: new, Equipment: ABS, * A-TA-R 14.4: * Wabco ABS * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 to. Gigant axles * Parabolic springs with tandem compensation unit * 300 mm height-adjustable drawbar with 40 mm flanged drawbar eye * Jost mech. support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 650 x 350 x 320 mm at the front on the right side of the chassis * 15-pin power plug * Multi-chamber tail lights 7Ukvwc9Wm9 * Bolted underride guard * Plastic quarter mudguards * Mains hooks in the bearings of the central locking system and 2 pieces on the front wall * Chassis made of fine-grained steel * Steel pallet 3-sided tipper body, continuous side walls at the top with inner tube reinforcement - without center stanchions - can be folded down with dropside spring lifter, rear stanchions bolted, combi steel wing doors - rear wall 2-leaf asymmetrically divided - can be swiveled and locked through 270° - cannot be folded down - and with additional swing frame for automatic rear wall opening when tipping, rear wall can be opened automatically when tipping, with additional swing frame for automatic rear wall opening when tipping, with additional swing frame for automatic rear wall opening when tipping, with additional swing frame for automatic rear wall opening when tipping. Locking via galvanized espagnolette lock at the rear and central locking, deactivation function for automatic rear wall function when tipping backwards with the wing door open * 1 x 5 to. lashing ring in each corner Lashing ring in each corner and 4 x 3 to. lashing rings embedded in the outer frame * 4 mm sheet metal floor made of fine-grained steel * Rear mounting rail for the feeder ramps * Reinforced body - with load securing certificate * 1 pair of aluminum trailer ramps approx. 3,570 x 410 mm (load capacity 10 to. / pair) suitable for rubber-tyred & tracked vehicles Lockable storage compartment underneath the loading area recessed into the chassis from the rear * Chassis, drawbar, underride guard, rear stanchion, rear folding supports hot-dip galvanized * Axles, springs, air reservoir and support winch painted black * Tires 285/70 19.5 * RAL color 2011 orange * New vehicle with manufacturer's warranty * Subject to errors and prior sale * immediately available from Egestorf

Overall weight: 750 kg, empty load weight: 210 kg, maximum load weight: 540 kg, operation weight: 750 kg, axe configuration: 2 axles, loading space length: 2,641 mm, loading space width: 1,256 mm, loading space height: 1,100 mm, tire size: 155/70 R13, Year of construction: 2024, Condition: new, Two-axle trailer Garden Trailer 264/2 KIPP Bxopj9Dw7K We hereby offer the largest unbraked car trailer with transport area dimensions of 264x125 cm, with which you can transport large loads. The Garden Trailer 264/2 KIPP model is a trailer that makes all your transportation tasks easier. Do you want to transport a large amount of wood? No problem! New household appliances or electronics? Nothing could be easier! From now on, no task will be daunting. With your own trailer, you don't have to pay too much at the rental store and you don't have to rely on the goodwill of your friends and neighbors. You can transport everything you need yourself, and loading and unloading is made easier with an inclined drawbar. Technical parameters of the Garden Trailer 264/2 two-axle trailer CHASSIS - two unbraked axles from the renowned AL-KO or KNOTT company. Tiltable V-drawbar with a ball coupling. All-season 155/70 R13 tires, which compensate for uneven road surfaces and enable a comfortable ride with the trailer. The supporting frame is made of bent steel profiles, hot-dip galvanized, bolted together. BODY - floor made of high-quality, waterproof, non-slip plywood, 9 mm thick with dimensions of the transport area: 2640 mm long x 1250 mm wide. Overall dimensions of the trailer: 3541 mm long x 1690 mm wide x 1120 mm high (with frame and tarpaulin) SIDES - Total height 30 cm made of durable galvanized steel, corrosion-protected. Multiple bends for greater rigidity. With brackets for the tarpaulin rope for correct tensioning of the tarpaulin. The rear side wall can be opened and completely dismantled.

Overall weight: 14,400 kg, maximum load weight: 10,870 kg, axe configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Condition: new, Equipment: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 to. Gigant axles * Parabolic springs with tandem compensation unit * 300 mm height-adjustable drawbar with 40 mm flanged drawbar eye * Jost mech. support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 650 x 350 x 320 mm at the front on the right side of the chassis * 15-pin power plug * Multi-chamber tail lights * Bolted underride guard * Plastic quarter mudguards * Mains hooks in the bearings of the central locking system and 2 pieces on the front wall * Chassis made of fine-grained steel * Steel Pal. 3-sided tipper body, continuous side walls at the top with inner tube reinforcement - without center stanchions, can be folded down with dropside spring jack * Bolted rear stanchions * Combination steel wing doors - rear wall 2-leaf asymmetrically divided - can be swivelled through 270° and locked - cannot be folded down - and with additional swing frame for automatic rear wall opening when tipping, locking via galvanized espagnolette lock at the rear and central locking, deactivation function for automatic rear wall function when tipping backwards with wing door open * 1 x 5 to. lashing ring in each corner Lashing ring in each corner and 4 x 3 to. lashing rings embedded in the outer frame * 4 mm sheet metal floor made of fine-grained steel * Rear mounting rail for the feeder ramps * Reinforced body - with load securing certificate * 1 pair of aluminum docking ramps approx. 3,570 x 410 mm (load capacity 10 to. / pair) suitable for rubber-tyred & tracked vehicles * Lockable storage compartment underneath the loading area recessed in the chassis for the ramps * Chassis, drawbar, underride guard, rear stanchion, rear folding supports hot-dip galvanized * Axles, springs, air reservoir and support winch painted black * Tires 285/70 19.5 * RAL color 9010 white * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf 7Uk7Hpycxq