Timber transporter

DOLL rapid+ 2-Achs-Kurzholzanhänger A2G-LZ64 ALPHA

Overall weight: 18,000 kg, maximum load weight: 14,100 kg, axe configuration: 2 axles, loading space length: 6,400 mm, Year of construction: 2025, Condition: new, total width: 2,550 mm, total height: 1,146 mm, Equipment: ABS, rapid+ 2-axle short timber trailer A2G-LZ64 SIERRA B3Qbhn293R * Only 3,900 kg tare weight * Air suspension * 2 single axles, make SAF, 12 t with drum brakes, including safety ropes * Tires 275/70 R 22.5 on steel rims * Aluminum air reservoir * EBS brake system * Full LED lighting * 4x LED work lights (1,800 lumens) * 1x grab handle * Paint finish: frame/frame color graphite black, stanchion color carmine red * Drawbar type GNZ 27, drawbar eye Ø 40 mm + footprint on drawbar * Side collision protection in accordance with ECE?R 73 * for transporting 3 x 2m / 2 x 3m / 1 x 4m / 1 x 5m / 1 x 6m timber * 4x DOLL MAMMUT stools + stanchions Plus TÜV approval. Ex works Mildenau. All prices plus registration and statutory VAT. Subject to alterations and prior sale. Further information on request. Information without guarantee. Illustrations may differ from the original. Contact Niclas Lott Tel:

Overall weight: 18,000 kg, maximum load weight: 14,900 kg, axe configuration: 2 axles, loading space length: 5,900 mm, Year of construction: 2025, Condition: new, total width: 2,550 mm, total height: 1,075 mm, Equipment: ABS, rapid+ 2-axle short timber trailer A2G-LZ59-L ALPHA * Only 3,100 kg tare weight * Air suspension * 2 single axles, make SAF, 9 t with disc brakes, including safety ropes * Tires: 275/70 R 22.5 on high-gloss aluminium rims * Aluminum air reservoir * EBS brake system * Full LED lighting * 4x LED work lights (1,800 lumens) * 1x grapple cable * Paint finish: frame/frame color graphite black * Drawbar type GNZ 27, drawbar eye Ø 40 mm + footprint on drawbar * lateral collision protection according to ECE?R 73 * for the transportation of 2 x 3m / 1 x 4m / 1 x 5m / 1 x 6m timber Bwxsfux * ExTe D7 stool, ExTe D7 EURO-C stanchions Plus TÜV approval. Ex works Mildenau. All prices plus registration and statutory VAT. Subject to alterations and prior sale. Further information on request. Information without guarantee. Illustrations may differ from the original. DOLL lightweight construction: This DOLL 2-axle trailer stands for modern vehicle construction and efficient timber transportation. The trailer offers the proven DOLL quality - practical and safe. Contact Niclas Lott Tel:

Overall weight: 18,000 kg, maximum load weight: 15,000 kg, axe configuration: 2 axles, loading space length: 5,900 mm, Year of construction: 2025, Condition: new, total width: 2,550 mm, total height: 1,081 mm, Equipment: ABS, rapid+ 2-axle short timber trailer A2K-LE59-L-ALPHA * Only 3,000 kg tare weight * Air suspension * 2 single axles, make SAF, 9 t with disc brakes, including safety ropes Cawfccxv7R * Tyres: 4x 385/55 R 22.5 on high-gloss aluminum rims * Aluminum air reservoir * EBS brake system * Full LED lighting * 4x LED work lights (1,800 lumen) * 1x grapple cable * Paint finish: frame/frame color graphite black * Drawbar type GNZ 27, drawbar eye Ø 40 mm + footprint on drawbar * Side collision protection according to ECE?R 73 * for transporting 2 x 3m / 1 x 4m / 1 x 5m / 1 x 6m timber * 4x ExTe D7 stools, ExTe D7 EURO-C stanchions DOLL lightweight construction: This DOLL 2-axle trailer stands for modern vehicle construction and efficient timber transportation. The trailer offers the proven DOLL quality - practical and safe. Plus TÜV approval. Ex works Mildenau. All prices plus registration and statutory VAT. Subject to alterations and prior sale. Further information on request. Specifications without guarantee. Illustrations may differ from the original. Contact Niclas Lott Tel:

Overall weight: 18,000 kg, maximum load weight: 14,900 kg, axe configuration: 2 axles, loading space length: 5,900 mm, Year of construction: 2025, Condition: new, total width: 2,550 mm, total height: 955 mm, Equipment: ABS, rapid+ 2-axle short timber trailer A2K-LZ59-L-ALPHA * Only 3,100 kg tare weight * Air suspension * 2 single axles, make SAF, 9 t with disc brakes, including safety ropes * Tires: 265/70 R 19.5 on aluminum rims Alcoa (Dura-Bright) * Aluminum air reservoir * EBS brake system * Full LED lighting * 4x LED work lights (1,800 lumen) Ba3Ot9Nbo * 1x grapple cable * Paint finish: frame/frame color graphite black * Drawbar type GNZ 27, drawbar eye Ø 40 mm + footprint on drawbar * lateral collision protection according to ECE?R 73 * for the transportation of 2 x 3m / 1 x 4m / 1 x 5m / 1 x 6m timber * 2x ExTe D7 + 2x ExTe D10 stools & stanchions DOLL lightweight construction: This DOLL 2-axle trailer stands for modern vehicle construction and efficient timber transportation. The trailer offers the proven DOLL quality - practical and safe. Plus TÜV approval. Ex works Mildenau. All prices plus registration and statutory VAT. Subject to alterations and prior sale. Further information on request. Information without guarantee. Illustrations may differ from the original. Contact Niclas Lott Tel:

Overall weight: 18,000 kg, maximum load weight: 14,225 kg, axe configuration: 2 axles, loading space length: 6,611 mm, loading space height: 4,000 mm, first registration: 01/2019, Condition: used, total width: 8,511 mm, total height: 2,550 mm, Equipment: ABS, DOLL - 2-axle short timber trailer in "stool design" type A2G-10L500 (A131) Technical data: Dimensions: Total trailer length: 8,511 mm (with drawbar length 1,900 mm) Loading length: 6,611 mm Front overhang: 760 mm Rear overhang: 856 mm Vehicle width: 2,550 mm Wheelbase: 4,995 mm Load height top edge of frame loaded: 1,187 mm (with 275/70 R 22.5 tires) Overall height: max. 4,000 mm Weights: Perm. total weight: 18,000 kg Axle load (2 x 9t): 18,000 kg (techn. 24,000 kg) Unladen weight approx.: 3,350 kg (without stools and stanchions) Payload approx.: 14,650 kg Basic equipment:A2G DOLL - 2-axle short timber trailer in "stool design" - straight top chord Sturdy welded construction consisting of 2 longitudinal beams with straight upper chord. - Bogie with ball bearing rim Dqlj9X - 1 wheel chock with bracket - Side underrun protection in accordance with ECE?R 737254461 Rear underrun protection: Aluminum underride guard, in accordance with ECE?R 58 Complete lighting and license plate holder installed in a protected manner, in accordance with ECE?R 487227407 Wheel cover: Complete plastic mudguards over the wheels, attached to the bogie at the front and to the main frame at the rear, with DOLL mud flaps behind the axles. Frame cover: Full-length aluminum duet plate cover (3/5 mm) bolted between the upper chords.7206867 Drawbar GZY27: Drawbar fork with silent bushing bearings and drawbar support, type GZY 27drawbar eye: Length: D-value: Maximum front axle load: Maximum total weight:Ø 50 mm (heavy-duty ECE) 1,900 mm 125 kN 10 t 27 t Connecting cable to the truck: routed along the drawbar (air, light, ABS). Cable routing: Brake and electrical cables routed protected on the main frame. Grapple bracket: Angled grapple bracket at the front, reinforced. Mud flap: Continuous mud flap at the end of the vehicle, swinging, with ?DOLL? log Chassis / Chassis:12 t Chassis: 2 single axles, BPW, 12 t with drum brakes, both axles with ABS and AGS, including safety ropes. Suspension type SL, with 2 x 43 mm trailing arms. Air suspension: Air suspension without lifting and lowering. Weight display without Smartboard: EBS-E weight display for trailers with air suspension, consisting of 2 pressure sensors to determine the axle loads. The axle loads are transmitted to the truck via CAN-BUS for weight display in the truck display. (Truck equipment not included in the scope of delivery!) Brake system: Electronically controlled 2-line air brake system (EBS-E). Brand name, load-dependent, including ABS. EBS system completely installed, spring-loaded parking brake, can be operated via parking release safety valve, as well as from the cab (truck-side installation not included in scope of delivery!) Aluminum air tank Brake connection: 1 duomatic clutch head. Tires: Tires (85.50 kg / piece): 8 pieces tires 275/70 R 22.5 make Continental Hybrid HS3 on steel rim 8.25 x 22.5. Stools / stanchions: Stool: 6 pieces ECCO? steel stool body with 2° stanchion inclination type Kombi 7 (80.0 kg), with bracket ? Clamp fastening on the main frame including 1 pair of hooks for load securing. Stanchions: ECCO aluminum stanchions type ALU 7, screwable, fixed dimension stanchions. Basic height 2,550 mm (21.0 kg). Maximum loading capacity per pair of stanchions 7t. Electrical equipment / lighting: Lighting system: Conventional wiring of the trailer to increase the quality standard. ? Long service life ? Insensitive to moisture and dirt ? Minimal maintenance ? Quick and easy repair in rare serv

Overall weight: 18,000 kg, maximum load weight: 14,900 kg, axe configuration: 2 axles, first registration: 09/2014, Condition: used, Equipment: ABS, Wood pendant Manufacturer Gsodam EZ: 3100 kg Payload 14900kg Aluminum rims Tel: We are happy to take care of your financing or leasing Sale EU: net after presentation of company documents and tax/VAT number we speak english govorimo srpsko-hrvatski our service for you: - Customs license plates - Export documents and EUR1 - Transportation worldwide - Overnight accommodation - Transfer from Munich airport or Passau train station Tel: Boie89Pbizp

Overall weight: 18,000 kg, axe configuration: 2 axles, Year of construction: 2025, Condition: new, total width: 2,530 mm, Equipment: ABS, 2-axle self-steering trailer type M2K-9L * KOMPAKT steering system * Corrosion resistance through powder coating * All attachments can be screwed on * Conventional wiring * Brackets and attachments in stainless steel or galvanized * 2 single axles, BPW, 10 t with disc brakes, including safety cables. * Air suspension * Aluminum air reservoir * Stool model IX, with 1x mechanically telescopic stanchions * Tires 275/70 R 22.5 on steel rims * EBS brake system * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumen) * Manual central lubrication * Paint finish: RAL 9011 graphite black * Payload approx. 14,550 kg 2-axle self-steering trailer type M2K-10B * Differences to the M2K-9L: * Leaf suspension * 2 single axles, make BPW, 12 t with drum brakes, including safety ropes * Stool model IX, with 1x hydraulically telescopic stanchions * 315/80 R 22.5 tires on steel rims * Electric central lubrication * Payload approx. 14,100 kg 2-axle self-steering trailer type M2K-10L * Differences to the M2K-9L: * 2 single axles, BPW make, 12 t with drum brakes, including safety ropes * Stool model IX, with 1x hydraulically telescopic stanchions * 315/80 R 22.5 tires on steel rims * Electric central lubrication * Payload approx. 14,100 kg 2-axle self-steering trailer type M2R-10L Differences to M2K-9L: * ratio steering system (4-cylinder) * 2 single axles, BPW, 12 t with drum brakes, including safety ropes * Stool model IX, with 1x hydraulically telescopic stanchions * 315/80 R 22.5 tires on steel rims * Electric central lubrication Guvdnnb * Payload approx. 13,965 kg Various additional equipment available. Further information on request. Illustrations may differ from the original. Information without guarantee. Contact Niclas Lott Tel:

Overall weight: 45,000 kg, maximum load weight: 30,350 kg, axe configuration: 2 axles, loading space length: 12,500 mm, loading space width: 2,550 mm, loading space height: 300 mm, first registration: 06/2024, next inspection (TÜV): 06/2025, Year of construction: 2024, Condition: used, total width: 2,550 mm, total height: 300 mm, Equipment: ABS, DOLL tera 2-axle low-bed semi-trailer Drive-off neck and additional drive-over rear carriage First registration 06/ 2024, in new condition Empty weight 14,650 kg Permissible total weight 45,000 kg Un0Xrellmf Length of gooseneck 3,070 mm Saddle height 1,200 to 1,280 mm Swing-through radius 2,350 mm Length of drop deck 6,800 mm Telescoping length 5,700 mm Length of rear axle chassis 2,700 mm Width of excavator trough 700 mm Depth of excavator trough 550 mm Loading height low bed 300 mm Loading height above the chassis 955 mm Width of the trailer 2,550 mm Hydraulic suspension -70 / + 530 mm Technical fifth-wheel load 21,000 kg Axle load 24,000 kg Retractable gooseneck with external main frame 3-layer paint finish of the trailer incl. spray galvanizing Doll Tronic CAN bus system Floor in low bed 45 mm spruce wooden planks between the flat bed frames 24-volt electric hydraulics Control of trailer functions with DOLL keypads on the gooseneck ADDITIONAL STEERING with FUNK EEG Electronic toe-in when driving straight ahead Rear aluminum folding ramps on the frame with lifting gear, length 2,100 mm, width 600 mm, mechanical width adjustment, load capacity 20,000 kg LaSi in drop deck: 7 pairs of swivel lashing eyes 13,400 daN lashing force 5 pairs of stanchion pockets in the outer frame 3 pairs of M36 threads on the outside for screwing in lashing brackets Chassis DOLL tera swing axles with BPW hydraulically sprung axles All axles hydraulically forced-steered with max. 60° steering angle on the last axle All lubrication points are connected to the ZSA WABCO Trailer EBS with ABS and RSS Aluminum air reservoir BEKA- MAX central lubrication system on the front and rear of the trailer Extra-wide package with folding load floor extensions 2x 225 mm, warning sign package extendable to 3,200 mm width 8-wheel tires 245/70 R 17.5 RENTING is the new BUYING, available immediately from us in full-service rental-----

Overall weight: 18,000 kg, maximum load weight: 14,180 kg, axe configuration: 2 axles, first registration: 08/2023, next inspection (TÜV): 09/2025, Condition: used, Equipment: ABS, Type Sierra Sierra - new immediately available Drum brakes, steel rims, EBS, LED lighting, 40 mm drawbar eye LED lighting 4x MAMMUT stools, 4 pairs of MAMMUT stanchions, Dpe0L2

Overall weight: 45,000 kg, empty load weight: 13,200 kg, maximum load weight: 31,800 kg, axe configuration: 2 axles, loading space length: 6,700 mm, loading space width: 2,550 mm, loading space height: 300 mm, color: black, tire size: 245/70 r 17.5, Condition: new, Equipment: ABS, Retractable gooseneck "Segmenti": -Hydraulically retractable gooseneck with external main frame with integrated steering pick-up and individually operated push-off cylinders. -Integrated hydraulic cylinders and support arms for picking up and setting down the drop deck (support on the truck required). -Line connections to the drop deck mounted on the inside of the main frame in the offset. -Bracket for locking pins. -Ladder with holding bar for safe access. -All valves and junction boxes easily accessible and covered with aluminum plates. -Unit support arm for picking up and setting down the drop deck. -6-way hydraulic coupling without relief valve for easy disconnection of the hydraulic lines. -Duomatic air connection -7-pin plug connection EBS -15-pin plug connection for power supply -10-pin plug connection for control unit -1 Pair of plastic shims for the drop deck without lateral support. -2 Pair of recesses for attaching hooks, 2000 daN lashing force. -1 Pair of swivel lashing eyes, 13400 daN lashing force, mounted on the lower support arm. -4 pairs of M16 threaded holes for screwing in lashing points, 2000 daN lashing force, in the open outer frame. Low bed (flat bed): -Flatbed frame telescopic. Frame pre-tensioning adjusted for the maximum payload, reduced payload in the telescopic positions. -Exterior is designed as an open U. -Prepared to accommodate load platform extensions. -Telescopic steps approx. every 500 mm + container positions. -Mechanical frame lock on the flatbed frame. -7 pairs of swivel lashing eyes 13400 daN lashing force. -5 pairs of stanchion pockets 100x50 mm in the outer frame. -3 pairs of M36 threads on the outside of the telescopic frame for screwing in lashing brackets. -Prepared for the installation of container locks. -2x 13400daN lashing rings welded onto the outside of the adapter towards the drop deck Chassis platform: -Welded steel construction in short design with excavator trough closed to the rear. -Offset to the drop deck 300mm x 15° beveled, with 3 pairs of holes on the slope and at the rear for attaching feeder ramps by means of securing pins. -Different track widths can be realized by means of 3 different holes. -Smooth steel plate welded over the axles with sanding, max. 8000 kg wheel load. End beam with cut-outs for lighting, designed as underride guard in accordance with ECE R58-003. -Powerbox with hydraulic control and electrical distribution installed at the end of the excavator trough. -Aluminum cover (approx. 500 mm) mounted above the power box. -Control elements mounted at the rear. -1 Pair of 2000 daN lashing eyes embedded in the outer frame over the corner -2 pairs of swivel lashing eyes 13400 daN in the outer frame. -2 pairs of stanchion pockets 100x50 mm embedded in the outer frame Floor: -45 mm spruce wooden floor between the flatbed frames Cxxzz8Fur7 Chassis: -DOLL panther-technology with split and sprung axles with BPW brakes and ECONab system. -All axles 12t, with ABS, AGS (automatic slack adjuster). -All axles hydraulically forced steered with max. 55° steering angle on last axle. -All lubrication points are connected to the central lubrication system. Tires: -8-wheel 245/70 R 17.5 on steel rims Suspension: -Double wishbone suspension with hydraulic suspension and damping elements. -Lifting and lowering device with 315 mm total lift (-70/+245). Hydraulic forced steering: -Hydraulic dual-circuit positive displacement steering. Steering take-off on the fifth wheel mounted on a turnta

Overall weight: 38,000 kg, axe configuration: 2 axles, first registration: 09/2021, Condition: used, * BPW axles Xb9Zhv8E * Drum brakes * WABCO SmartBoard * Kilometers: 41,605 km * Central lubrication -----Internal vehicle number: 8554-----Errors & prior sale excepted.

Overall weight: 38,000 kg, maximum load weight: 30,400 kg, axe configuration: 2 axles, loading space length: 15,215 mm, Year of construction: 2025, Condition: new, total width: 2,550 mm, total height: 1,640 mm, Equipment: ABS, 2-axle semi-trailer LOGO 21 * Air suspension * 2 single axles, BPW, 12 t with drum brakes * Manual mechanical support * 8 x DOLL Mammut stools and stanchions * 315/80 tires on steel rims * EBS-E brake system * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumen) * BEKA-MAX central lubrication pump * 2x snow chain holder * RAL 9011 graphite black (frame + stool), RAL 3002 carmine red (stanchions) * Side collision protection in accordance with ECE?R 73 * All attachments in accordance with EC regulations Various optional extras available. Further information on request. Illustrations may differ from the original. Information without guarantee. Contact Niclas Lott Tel: Gdp2Emfje

Overall weight: 18,000 kg, maximum load weight: 14,100 kg, axe configuration: 2 axles, first registration: 07/2024, next inspection (TÜV): 07/2025, Condition: used, Equipment: ABS, Sierra drum brakes, steel rims, EBS, LED lighting, 4x MAMMUT stools, 4 pairs of MAMMUT stanchions, Bciyppxwnnu

Overall weight: 32,000 kg, maximum load weight: 25,400 kg, axe configuration: 2 axles, Year of construction: 2025, Condition: new, total width: 2,550 mm, total height: 1,650 mm, Equipment: ABS, 2-axle semi-trailer LOGO 21, "lightweight construction" * Air suspension * 2 single axles, BPW, 9 t with disc brakes * Plug-in support * 6 x DOLL Mammut stools and stanchions Bc9Wkkibc * 275/70 tires on steel rims * EBS-E brake system * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumen) * BEKA-MAX central lubrication pump * 2x snow chain holder * RAL 9011 graphite black (frame + stool), RAL 3002 carmine red (stanchions) * Side collision protection in accordance with ECE?R 73 * All attachments in accordance with EC regulations Various optional extras available. Further information on request. Illustrations may differ from the original. Information without guarantee. Contact Niclas Lott Tel:

Overall weight: 18,000 kg, maximum load weight: 16,400 kg, axe configuration: 2 axles, loading space length: 3,500 mm, Year of construction: 2024, Condition: new, total width: 2,550 mm, total height: 955 mm, Equipment: ABS, rapid+ 2-axle central axle trailer A2T-LZ35 ALPHA * Only 2,600 kg tare weight * Air suspension * 2 single axles, make SAF, 9 t with disc brakes, including safety cables * 265/70 R 19.5 tires on high-gloss aluminium rims * Aluminum air reservoir * EBS brake system * Full LED lighting * 4x LED work lights (1,800 lumen) * 2x grapple rope P3F3L * Paint finish: frame/frame color graphite black * Drawbar with Ø 50 mm towing eye * Side collision protection in accordance with ECE?R 73 * for transporting 1 x 3m / 1 x 4m / 1 x 5m timber * 2x ExTe D10 stools + ExTe EURO-C stanchions Plus TÜV approval. Ex works Mildenau. All prices plus registration and statutory VAT. Subject to alterations and prior sale. Further information on request. Information without guarantee. Illustrations may differ from the original. Contact Niclas Lott Tel:

Overall weight: 18,000 kg, maximum load weight: 14,750 kg, axe configuration: 2 axles, loading space length: 5,250 mm, Year of construction: 2024, Condition: new, total width: 2,550 mm, total height: 1,076 mm, Equipment: ABS, rapid+ 2-axle central axle trailer A2T-LZ53 ALPHA * Only 3,250 kg tare weight * Air suspension * 2 single axles, make SAF, 12 t with disc brakes, including safety cables * 275/70 R 22.5 tires on high-gloss aluminium rims * Aluminum air reservoir * EBS brake system * Full LED lighting * 4x LED work lights (1,800 lumen) * 2x grapple rope * Paint finish: frame/frame color graphite black * Drawbar type GNZ 27, drawbar eye Ø 50 mm + footprint on drawbar * Side collision protection according to ECE?R 73 * for transporting 2 x 2m / 2 x 3m / 1 x 4m / 1 x 5m / 1 x 6m timber * 4x ExTe D7 stools + ExTe EURO-C stanchions Plus TÜV approval. Ex works Mildenau. All prices plus registration and statutory VAT. Subject to alterations and prior sale. Further information on request. Information without guarantee. Illustrations may differ from the original. Contact Uidhfao Niclas Lott Tel:

Overall weight: 97,000 kg, maximum load weight: 69,800 kg, axe configuration: > 3 axles, first registration: 09/2014, Condition: used, total width: 2,750 mm, total height: 2,900 mm, Equipment: ABS, Special low loader for long and heavy loads, the low bed has a loading area of approx. 7,700 mm, plus 5,300 mm telescopic, the low bed can be turned into a platform (length 15,305 mm - telescopic up to 20,605 mm), the loading height as a low bed is approx. 420 mm, the loading height as a platform is approx. 800/900 mm, the low bed has a widening of up to 3.200 mm, axles: DOLL panther technology, double wishbone suspension, with hydraulic suspension, per axle 12000 kg, fifth wheel load 25,000 kg, payloads up to approx. 80,000 kg suitable, only at reduced speed, the dimensions without DOLLY axles at the front: length approx. 17,350 + 5,300 mm telescopic, unladen weight approx. 21600 kg, payload up to approx. 69,650 kg suitable, only at reduced speed, new price today approx. 460,000 euros net Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us! Ccgidaieis

Overall weight: 16,000 kg, empty load weight: 3,400 kg, maximum load weight: 12,600 kg, axe configuration: 2 axles, first registration: 01/1981, suspension: steel, tire size: 12R22.5, Year of construction: 1981, Condition: used, mileage: 1,001 km, gearing type: other, total length: 2,500 mm, total width: 2,550 mm, driver cabin: other, Vehicle location: Bovenden, 2-axle, BPW axles, leaf suspension, twin tires Clhg3Pjuiy Self-driving ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Overall weight: 42,000 kg, maximum load weight: 35,650 kg, axe configuration: 3 axles, loading space length: 12,950 mm, loading space height: 1,347 mm, Year of construction: 2023, Condition: new, total width: 2,550 mm, Equipment: ABS, 3-axle semitrailer LOGO 14XL especially for OFF- and ON-ROAD USE! * Electronic air suspension * 3 single axles, make SAF, 9 t with disc brakes * 1st axle liftable, 3rd axle self-steering * Radio control for operating the frame lock and brake * Manual mechanical support * Stools: 8x ExTe D7 (item 1 with double pockets, item 2 movable and with flat stake pockets as well as with quick-release wedge system) * Stanchions: 14x ExTe D7 telescopic stanchions, 2x ExTe D10 telescopic stanchions * Tires: 385/65 R 22.5 on steel rims * EBS brake system * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumen) * Aluminum air tank * 1x grab rope * 1x maneuvering coupling * Frame + stool in RAL 9011 graphite black * All attachments in accordance with EC regulations Btsvuq3Cya Various additional equipment available. Further information on request. Illustrations may differ from the original. Information without guarantee. Contact Niclas Lott Tel:

Overall weight: 18,000 kg, maximum load weight: 14,050 kg, axe configuration: 2 axles, loading space length: 6,800 mm, loading space width: 2,300 mm, first registration: 11/2014, next inspection (TÜV): 08/2023, Condition: used, Equipment: ABS, * ABS * BPW ECO-Plus axles * 5-chamber rear lights * Duomatic air connection ----Body: Doll short timber body with 4 Doll Mammut stanchion pairs. Sale only to tradesmen. FOR EXPORT ONLY THE NET PRICE IS TO BE PAID !!!!! ALL SPECIFICATIONS WITHOUT GUARANTEE INS. All sales contracts, invoices, pro forma invoices, orders, sales talks are based on our general terms and conditions (see imprint). Pytix3

Overall weight: 39,500 kg, empty load weight: 5,590 kg, maximum load weight: 33,910 kg, axe configuration: 3 axles, loading space length: 11,000 mm, first registration: 08/2020, suspension: air, tire size: 385/65 R22,5, Condition: used, Equipment: ABS, truck registration, | Doll H3S-12 timber trailer 3-axle | SAF axles with disc brakes | tare weight 5590kg | payload: 33910 kg | loading area length: 11.00m | lift axle | 4 pairs of stanchions movable 2 rigid, | tires: 385/65R22.5 | Austrian vehicle Errors excepted, subject to change and prior sale. Phaxzq3Kh7

Overall weight: 42,000 kg, maximum load weight: 35,850 kg, axe configuration: 3 axles, loading space length: 10,735 mm, Year of construction: 2024, Condition: new, total width: 2,550 mm, Equipment: ABS, LOGO 14X 3-axle semi-trailer especially for OFF- and ON-ROAD USE! F7Z8Yxcq0 * Electronic air suspension * 3 single axles, make SAF, 9 t with disc brakes * 1st axle liftable, 3rd axle self-steering * Radio control for operating the frame lock and brake * Manual mechanical support * Stools: 8x ExTe D7 (item 1 with double pockets, item 2 movable and with flat stake pockets as well as with quick-release wedge system) * Stanchions: 14x ExTe D7 telescopic stanchions, 2x ExTe D10 telescopic stanchions * Tires: 385/65 R 22.5 on steel rims * EBS brake system * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumen) * Aluminum air tank * 1x grab rope * 1x maneuvering coupling * Frame + stool ExTe D7 in RAL 9011 graphite black * All attachments in accordance with EC regulations Various additional equipment available. Further information on request. Illustrations may differ from the original. Information without guarantee. Contact Niclas Lott Tel:

Overall weight: 18,000 kg, maximum load weight: 14,450 kg, axe configuration: 2 axles, loading space length: 5,250 mm, Year of construction: 2024, Condition: new, total width: 2,550 mm, total height: 1,076 mm, Equipment: ABS, rapid+ 2-axle central axle trailer A2T-LZ53 SIERRA * Only 3,550 kg tare weight * Air suspension * 2 single axles, make SAF, 12 t with drum brakes, including safety ropes * Tires 275/70 R 22.5 on steel rims * Aluminum air reservoir Bzeijunw * EBS brake system * Full LED lighting * 4x LED work lights (1,800 lumens) * 2x grapple rope * Paint finish: frame/frame color graphite black * Drawbar type GNZ 27, drawbar eye Ø 50 mm + footprint on drawbar * Side collision protection according to ECE?R 73 * for transporting 2 x 2m / 2 x 3m / 1 x 4m / 1 x 5m / 1 x 6m timber * 4x DOLL MAMMUT stools + stanchions Plus TÜV approval. Ex works Mildenau. All prices plus registration and statutory VAT. Subject to alterations and prior sale. Further information on request. Information without guarantee. Illustrations may differ from the original. Contact Niclas Lott Tel:

Overall weight: 39,500 kg, maximum load weight: 34,720 kg, axe configuration: 3 axles, loading space length: 9,195 mm, Year of construction: 2024, Condition: new, total width: 2,550 mm, Equipment: ABS, 3-axle semi-trailer LOGO 10X * Steel smooth sheet metal cover welded over kingpin * Welded steel tear plate rear cover * Electronic air suspension * 3 single axles, make SAF, 9 tons with disc brakes * 1st axle can be lifted * Manual mechanical support * Stools: 6x ExTe D10 (item 4 with double pockets, item 5 with flat stake pockets and quick-release wedge system) * Stanchions: 10x ExTe D7 telescopic + 2x ExTe D10 telescopic * Tires: 385/55 R 22.5 on steel rims * EBS brake system * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumen) * Aluminum air tank * 3x grab deflectors between the stools * Frame + stools in RAL 9011 graphite black * All attachments in accordance with EC regulations Illustrations may differ from the original. Specifications without guarantee. Contact: Doac0V Niclas Lott Tel:

Overall weight: 61,000 kg, empty load weight: 22,420 kg, maximum load weight: 38,580 kg, first registration: 12/2001, next inspection (TÜV): 08/2023, suspension: other, color: blue, tire size: 285/70R19.5, Condition: used, gearing type: other, front tire size: 285/70R19.5, rear tire size: 285/70R19.5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Registration service, HU/SP/UVV, transfer to port Languages: German,Russian,English,Arabic Nnms0Xqz Basic color: blue Extras in the equipment ABS, air brake, EBS, ready to drive, price on request (mobile), suspension: other, payload(kg):38580 Body type: 4 axle with 2 axle dolly axle, forced steering, top condition, HSN/TSN: 5027/000 also as complete train with 4 axle DB 4163 Errors excepted.