Three-way tipper trailer

MEILLER MZDA 18/23

Condition: new, maximum load weight: 13,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2026, Brakes: * Wabco TEBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes 420 x 180 mm with asbestos-free brake linings and closed brake drums ----Axles: * 2 x 9 ton BPW or SAF axles ----Suspension: * Air suspension, automatic rapid lowering during the tipping process to increase stability (can be disabled for asphalt pavers) ----Drawbar / Flange coupling: * Curved central drawbar with height-adjustable 50 mm flange coupling (tipping via the drawbar is possible, but with a limited tipping angle and dependent on the towing vehicle) ----Electrical system / Lighting: Dedpfezd I Dijx Ak Tocl * Tire pressure monitoring system (TPMS) * 15-pole electrical connector * 5-chamber tail lights with protective cover ----General components: * Aluminum air reservoir * Welded box-type drawbar * Support jack at the front * Underrun protection at the rear * Closed plastic individual fenders * Access ladder on the front left side, on the front panel ----Tipping body: * Steel 3-sided tipping body with M-Jet sideboards * Front panel made of 3 mm STEELECT 240 steel * Side walls with sturdy, continuous top rail inclined inwards * Side walls and rear gate made of 4 mm STEELECT steel (HBW 400) * Continuous side walls – without center rail * Right side wall pivots via manual central locking – preparation for long lever and hinges for folding side wall * Left side wall pivots via manual central locking and can be folded down with sideboard spring lift * 4 mm rear gate pivots with automatic cam lock and 150 mm rear tailgate * Manual metering device via chain * 5 mm bridge floor made of STEELECT steel (HBW 450 steel) ----Roller cover: * Roller cover (RAL 9006) with crank handle at the rear and guide rail on the front panel ----Painting: * Chassis painted in RAL 7021 black-gray * Painting of the sideboards in RAL 9006 white aluminum ----Information: * Vehicle body complies with EN 12642 XL * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Available from approximately week 37/2026

Condition: new, maximum load weight: 13,400 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, loading space volume: 10 m³, Equipment: ABS, with roll tarp rear wall with cam lock swinging and foldable left side wall with spring relief swinging right side wall swinging rear wall floor: 5 mm HBW 450 (Hardox® 450 or comparable material) BPW axles disc brakes for rim size 22.5" offset ET120 air suspension tipper color: pure white RAL 9010 top-of-the-line equipment rent, buy, lease-to-own rent from 540 euros net per month with full service (rental prices vary depending on the term) all information can be found at / Lease-to-own example: 560 euros net per month for a term of 48 months, with a down payment of 7500 euros net and a final payment of 5000 euros net all information is net, plus VAT, and subject to a positive credit check New in stock special price with cover Dodpoy Ngwzsfx Ak Tscl disc brake air suspension many extras

Condition: new, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2025, Brakes: * Wabco TEBS-E / ABS (electronic braking system with RSS) * Emergency release system for spring brake cylinders * Drum brakes 420 x 180 mm with asbestos-free brake linings and enclosed brake drums ----Axles: * BPW axles ----Suspension: * Air suspension * Automatic rapid lowering during the tipping process to increase stability (can be disabled for asphalt pavers) ----Electrical system / Lighting: * Tire pressure monitoring system (TPMS) * 5-chamber taillights with protective cover * 15-pole power connector ----Drawbar / Flange coupling: * Curved central tube drawbar with height-adjustable 50 mm flange coupling (tipping via the drawbar is possible, but with a limited tipping angle and dependent on the tractor unit) ----General components: * Aluminum air reservoir * Welded box-type steering linkage * Front support jack * Underrun protection at the rear * Enclosed plastic individual fenders * Access ladder on the front left outside on the front wall ----Tipping body: Dcodpezhdxksfx Ak Tsl * Steel 3-sided tipping body with M-Jet side boards * Front wall made of 3 mm STEELECT 240 steel * Side walls with sturdy, continuous top rail inclined inwards * Side walls and tailgate made of 4 mm STEELECT steel (HBW 400) * Continuous side walls - without center stringer * Right side wall pivoting via manual central locking - preparation for long lever and hinges for the fold-down side wall * Left side wall pivoting via manual central locking and foldable with side board spring lifter * Tailgate pivoting with automatic cam lock and 150 mm rear tailgate * Manual metering device via chain * 5 mm bridge floor made of STEELECT steel (HBW 450 steel) ----Paintwork: * Chassis painted in RAL 7021 black-grey * Painting of the side boards in RAL 9006 white aluminum ----General information: * Vehicle body complies with EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale * 2 available ----Delivery time: * Immediately available from Egestorf

Condition: new, maximum load weight: 13,320 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2026, Equipment: ABS, Brakes: * Wabco TEBS-E / ABS (electric braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes 420 x 180 mm with asbestos-free brake linings and enclosed brake drums ----Axle: * 2 x 9 ton BPW or SAF axles ----Suspension: * Air suspension, automatic rapid lowering during the tipping process to increase stability (can be disabled for asphalt pavers) ----Electrical System / Lighting: * Tire Pressure Monitoring System (TPMS) * 15-pin power connector * 5-chamber tail lights with protective cover ----Drawbar / Fifth Wheel: * Curved central tube drawbar with height-adjustable 50 mm fifth wheel (tipping via the drawbar is possible, but with a limited tipping angle and dependent on the tractor unit) ----General Components: * Aluminum air tank, welded box-type drawbar * Front support jack * Rear underrun protection * Enclosed plastic mudguards ----Tipping Body: * Steel 3-sided tipping body with M-Jet side boards * Continuous side walls - without center supports * Right side wall pivoting via manual central locking - preparation for long levers and hinges for a folding side wall * Hydraulically folding left side wall (side board automation) * Rear tailgate pivoting with automatic cam lock and 150 mm rear gate Dedpfezd I Dcex Ak Tjcl * Manual metering device via chain ----Thickness of floor, side walls, front and rear walls: * Front wall made of 3 mm STEELECT 240 steel * Side walls with stable, continuous, inward-sloping top rail * Side walls and rear gate made of 4 mm STEELECT steel (HBW 400 steel) * 5 mm bridge floor made of STEELECT steel (HBW 450 steel) ----Roll-over Cover: Roll-over cover (RAL 9006) with crank handle at the rear and guide rail on the front wall ---- Painting: * Chassis painted in RAL 7021 black-gray * Painting of side boards in RAL 9006 white-aluminum ----General Information: * Vehicle superstructure complies with EN 12642 XL * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images ----Delivery Time: * Immediately, from approximately week 37/2026