Low loader trailer

Möslein T 3-6,60 VB 3 Achs Tieflader, Luftgefedert

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Overall loading area length approx: 8,800 mm, low bed approx: 6,600 mm long, loaded platform height approx: 890 mm, 24 x lashing rings each rated at 10 t, 12 x stake pockets in the outer frame, loading ramps (approx. 4,250 x 750 mm), loading ramps laterally adjustable, 68 mm thick wooden floor, storage box with lid for lashing chains or tie-down straps, contour marking according to regulations, rotating beacon, vehicle hot-dip galvanized, incl. axle load indicators. Surcharge for: warning signs with lighting and rotating beacon, extension to 3 m with wooden outriggers, Price: 500 €; Excavator arm recess = price: 1,000 € net. -- Subject to typing errors, mistakes, and changes. Sample photos. -- More data at: !, More Details: ! Hfedpfx Aszr Um Tslyok

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading platform length, length approx. 3,750 mm, with a rear slope of approx. 850 mm x 10° -Hydraulically extendable and retractable, stroke +- 250 mm incl. hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For semi-trailer tractors: 6 x 4 and 8 x 4 Loading platform: -Loading platform in extendable design, length approx. 11,000 mm with a slope at the rear of approx. 500 mm x 10°. -A recess in the loading platform and into the slope to accommodate the excavator arm, approx. 4,240 x 900 x 440 mm -Pneumatic locking with tapered locking pin and reinforced locking positions, the supply lines are protected in the extendable beams and automatically adapt to the respective loading platform length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically folding ramp tips. -Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 215 mm -Rubber flooring "Super Grip" 25 mm and sheet metal flooring approx. 5 mm as additional reinforcement on the slope of the loading platform -Square climbing strips 20x30 mm, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steering -The steering behavior of the two front axles can be optimally adjusted both mechanically and hydraulically to the loading platform length. -Hose rupture valve on the axle compensation cylinders with automatic RESET function. -Hydraulic cylinders with shut-off valves and quick-release couplings to secure in the raised position. -245/70 R 17.5 3PMSF Included accessories: -Steel headboard, pluggable, approx. 400 mm high -Connection strip for supply lines to the semi-trailer tractor, mounted at the height of the outer frame profile -1 spare wheel -Outer carrier of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screw-in lashing rings included -Diamond plate flooring above the gooseneck -On the gooseneck, 1 pair of pluggable aluminum sideboards, approx. 400 mm high, anodized -On the gooseneck, a pluggable aluminum rear panel, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate of the gooseneck for the turntable, approx. 500 mm wide -4 wheel chocks -4 axle load manometers -Mechanical outrigger supports at the front -1 INOX toolbox, one-piece, approx. 2,480 x 340 x 390 mm -Mechanical outrigger supports at the front Hfedpfxek Af Svs Alyok -Continuous sheet metal flooring on the loading platform with a sand coating as an anti-slip measure -1 intermediate table, approx. 500 mm wide, for the extension, with elongated holes for attaching and adjustable bridging elements -Sand coating on the support surfaces of the intermediate table -Mechanical locking to lock the intermediate table to the extension -8 pairs of pocket rails in the outer frame -Extensions (galvanized), extendable by approx. 230 mm on each side -1 pair of hydraulic rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electric-hydraulic unit -Extension planks, loose, in reinforced steel U-profile -Wireless and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading area length approx.: 8,800 mm, low bed approx.: 6,600 mm long, loading height incl. approx. 890 mm, 24 lashing eyes each 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 750 mm), climbing bar on the outside of the ramps and rear slope, loading ramps adjustable to the sides, wooden floor 68 mm thick, storage box with lid for lashing chains or tensioning belts, contour marking according to regulations, rotating beacon, vehicle hot-dip galvanized, , incl. axle load indicators, , surcharge for:, warning signs with lighting and rotating beacon, widening to 3 m with Holzer, price: 500 ¤, , hydraulic displacement of the ramps, price: 1,000 ¤, , excavator trough, price: 1,000 ¤ net, , , --  Misprints, errors and changes reserved, sample- Pictures --, More data at: !, More Details: ! Hedpszr Sf Hofx Alyofk

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading area length approx.: 8,800 mm, low bed approx.: 6,600 mm long, loading height incl. approx. 890 mm, 24 lashing eyes each 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 750 mm), climbing bar on the outside of the ramps and rear slope, loading ramps adjustable to the sides, wooden floor 68 mm thick, storage box with lid for lashing chains or tensioning belts, contour marking according to regulations, rotating beacon, vehicle hot-dip galvanized, , incl. axle load indicators, , surcharge for:, warning signs with lighting and rotating beacon, widening to 3 m with Holzer, price: 500 ¤, , hydraulic displacement of the ramps, price: 1,000 ¤, , excavator trough, price: 1,000 ¤ net, , , --  Misprints, errors and changes reserved, sample- Pictures --, More data at: !, More Details: ! Hedpezrqkusfx Alyefk

Condition: excellent (used), axle configuration: 3 axles, first registration: 07/2016, suspension: air, Year of construction: 2016, Equipment: tail-lift, Suspension: Air suspension Rear axle 1: Steered Hodjvvwzrepfx Alysfk Rear axle 2: Steered Rear axle 3: Steered Gross vehicle weight: 48,000 kg Technical condition: Very good Visual condition: Very good Price: On request Please contact David F Middelman for further information.

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading area length approx.: 8,800 mm, low bed approx.: 6,600 mm long, loading height incl. approx. 890 mm, 24 lashing eyes each 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 750 mm), climbing bar on the outside of the ramps and rear slope, loading ramps adjustable to the sides, wooden floor 68 mm thick, storage box with lid for lashing chains or tensioning belts, contour marking according to regulations, rotating beacon, vehicle hot-dip galvanized, , incl. axle load indicators, , surcharge for:, warning signs with lighting and rotating beacon, widening to 3 m with Holzer, price: 500 ¤, , hydraulic displacement of the ramps, price: 1,000 ¤, , excavator trough, price: 1,000 ¤ net, , , --  Misprints, errors and changes reserved, sample- Pictures --, More data at: !, More Details: ! Hfsdpezrdtvsfx Alyjk

Condition: new, empty load weight: 10,600 kg, maximum load weight: 35,400 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,540 mm, loading space height: 940 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Loading area: -Loading area in extendable design -Loading area with hardwood planks with rear bevel of approx. 500 mm x 8° -2 pairs of lashing rings (LC 5,000 daN) -1 pair of lashing rings (LC 10,000 daN) -6 pairs of lashing rings that can be folded outwards (LC 5,000 daN) -3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) -Cutouts in the outer frame of the loading area for attaching tensioning straps Braking system: -Braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: -First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer -A high-quality 2-component (2K) top coat in a single color in Nova gray -Rear section metallized and in Painted RAL 9010 (pure white) -No metallic paint possible Seatposts: -JOST seatposts (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: -Steel construction made of high-strength fine-grain steel -Steel grades: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) Electrical system: -Electrical system in accordance with EU regulations, LED lighting 24 volts -2x 7-pin & 15-pin sockets Axles and tires: -BPW axles, air-sprung, with disc brakes (377 mm), with lifting/lowering function -Hydro-mechanical forced steering Hfsdpfx Ajl Ux Rwelyok -Axle tool -Twin tires 235/75 R 17.5 Accessories included: -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks with bracket -2" king pins -A galvanized steel front wall approx. 1600 mm high -White reflector tape in accordance with EU regulations on the side, on the extension and red at the rear -Loading area with strong hardwood floor -Steering from the front and rear using a cable -Remote control operated via push buttons, with alignment control of the axles -With radio remote control for the steering -9 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area. -Galvanized folding supports under the slope of the loading area -Movable mounting rail for aluminum docking ramps at the rear of the vehicle -European reflector signs (red-yellow) at the rear of the trailer -A mud flap at the rear of the trailer -A bracket for a rotating beacon at the rear of the trailer -A bracket for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -A tool box INOX 1,500x390x810 under the loading area on the right in the direction of travel -Central lubrication system BEKAMAX (Pico) with normal grease NLHI-2 and removable protection around the pump -6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2 x 20ft container or 1 x 40ft container, an additional locking point is provided in the pull-out for a 45ft container -4 pairs Stake pocket strips, mounted transversely in the loading area, for 100 x 50 mm stakes -Lift axle on the front axle with control by TEBS -A dependency on the current axle load and the current loading status -Speed sticker 80 km/h at the rear and on both sides -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm with an LED position light -A holder for a rotating beacon on the warning signs -Load pressure gauge for determining the axle loads including load diagram -HRM metallization (high resistance metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZIN

Condition: new, functionality: fully functional, empty load weight: 9,200 kg, maximum load weight: 29,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 10,000 mm, loading space width: 2,550 mm, loading space height: 850 mm, total length: 13,700 mm, total width: 2,550 mm, suspension: air, tire size: 245.70 R 17.5, color: white, trailer brake: trailer braked, Year of construction: 2026, Equipment: ABS, tail-lift, De Angelis semi-trailer, new, in stock and ready for delivery, subject to prior sale. 3 axles with air suspension, steerable 3rd axle, EBS. 10-meter long platform, ground clearance 85 cm. Double electro-hydraulic ramps with double piston for full opening, width-adjustable ramps, hot-dip galvanized ramps. Includes a pair of Rud side hooks and kingpin housings. Decking made of sheet metal and wood. 12 tires, size 245.70 R 17.5. Aluminum side rails on the gooseneck. Manufacturer's warranty. DEALER: INTERDRIVE SRL - PARMA. Hjdjznm Tqspfx Alyofk

Condition: excellent (used), functionality: fully functional, empty load weight: 9,500 kg, maximum load weight: 30,500 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 08/2022, total length: 13,650 mm, total width: 2,550 mm, suspension: air, tire size: 245.70 r 17.5, ground clearance: 850 mm, color: blue, trailer brake: trailer braked, Year of construction: 2022, Equipment: ABS, tail-lift, Used gooseneck lowboy semi-trailer with Komodo winch, featuring double, electro-hydraulic extendable ramps, a 10-meter-long platform, a ground clearance of 86 cm, and side widening extensions. It has pairs of 8-ton Rud side hooks, as well as internal pairs of hooks on the platform. It includes an 80-quintal electric winch with cable, hook, and retrieval system. It has three axles with adjustable air suspension, with the first axle being liftable and the third axle being steerable. Year of manufacture: 2022. Valid inspection certificate until January 31, 2027. - INTERDRIVE SRL DEALERSHIP - PARMA Hfjdpfxjzp E Hxs Alyjk

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,500 kg, maximum load weight: 18,700 kg, overall weight: 26,200 kg, axle configuration: 2 axles, total length: 12,400 mm, total width: 2,550 mm, tire size: 205 / 65 r 17,5, Additional Information Chassis, Saddle, Haulage Company Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins, rear slope to approx. 1920 mm, continuous lashing rail for ramps at the rear and front on the gooseneck, sliding rollers at the rear, low-bed to the axle group after the slope. Drawing approval required from the customer in case of an order! Pair of lashing points recessed in the outer frame at the top and side, 10 tons each. Pair of lashing eyes recessed in the outer frame on the gooseneck, 5 tons each. 24-ton, 2-stage support winch, single-sided operation, with straight lower part, without stroke compensation. Foldable rear support, mounted externally. Wheel chocks with holder. Aluminum side impact protection. Steel underrun protection for EC, if technically possible. Quarter panel fenders. With anti-spray flaps according to EC. 1 pair of wheel recesses recessed in the low-bed area after the gooseneck, sloped for entry. Length at the bottom approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses on the rear slope. Depth approx. 200 mm. Note: Frame in the main beam area is 200 mm higher than the wheel recess. A detailed technical review is still required in case of an order. Wheel recess cover retractable from the low-bed with hardwood inserts, on the rear slope with hardwood inserts. Electric winch, 24 Volt, pulling force 5500 kg, mounted in the slope of the gooseneck, does not reach into the loading area, operation with wireless remote control, rope length 35 m x approx. 10 mm, with roller rope guide and detachable guide roller on the rear slope. Axles + Suspension Hfsdpji Ri Hrjfx Alysk SAF or BPW drum brake axles at our discretion. Air suspension with lift and lower valve + auto-reset function. Wheels and Tires 205 / 65 R 17.5 tires with 129/127K (132/132G) marking for 8 tons tire load capacity at max. 90 km/h. At the manufacturer's choice. Steel rims in twin arrangement, factory silver. Braking System 2-line pneumatic braking system. Spring-loaded parking brake. 2 non-interchangeable coupling heads at the front, without connecting line. EBS manufacturer Haldex, electronic braking system with EBS socket at the front, without connecting cable (brake calculation sent to the customer for approval. 07/15/2021). Attention: The trailer may only be pulled by towing vehicles which ensure the effectiveness of the ABS! Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scale). Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. 2 white position lights at the front. 2 white/red marker lights at the rear. 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable. Floor Gooseneck with steel / checkered plate covering. 30 mm sieve floor, in the low-bed between the longitudinal beams in the middle. In the wheel track area covered with toothed grating, in the wheel recesses with steel / checkered plate covering. Ramps Pair of aluminum ramps 3,200 mm long, load capacity per pair 12,000 kg. Pair of steel ramps for entry into the low-bed. Pair of steel ramps for driving onto the gooseneck. Side boards Approval / Signs Country of registration: Germany With DEKRA approval and certificate (according to §13 EC - FGV). Prepared for single-row license plate holder. Contour marking with reflective strips according to ECE R 048, yellow on the