Road sweeper

MERCEDES-BENZ ACTROS 1830 4x2 Kehrmaschine BUCHER OPTIFANT8000

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm Nodergzv Njpfx Akcocw LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: new, maximum load weight: 78,400 kg, overall weight: 98,000 kg, axle configuration: > 3 axles, total width: 2,750 mm, Year of construction: 2025, with air suspension, hydromechanical forced steering, single telescoping platform-type loading area, with 2-part loading ramps Unladen weight 21,100 kg Payload 76,900 kg Length = 14,050 mm STZ-L Gooseneck - 45° chamfered front corners (468 x 468 mm), closed outer frame - robust steel and welded construction - formed loading area 3,700 x 2,480 mm - hydromechanical forced steering (dual-circuit steering) in low-profile design (construction height 235 mm) with adjustable guide elements - Turntable-mounted saddle plate with replaceable 3.5" kingpin and adjustable steering wedge - Fifth wheel load 26,000 kg - Steering radius 2,700 mm - Premium tool box Loading area - "Platform, single telescoping" design - Traffideck® polymer rubber surface - Loading area, single telescoping, designed as outer-inner tube construction - Extension stage locking via spring-loaded cylinders and locking bolts - Intermediate table 300 mm - Fixed support at front, 700 mm long Chassis - 6-axle air-suspended chassis, wheelbase 1,510 mm - Axle assembly from BPW, consisting of one fixed axle and five hydromechanically forced-steered stub axles with a maximum steering angle of 45° - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Standard lift and lower valve for lowering to a minimum of 785 mm or raising to a maximum of 985 mm (not for driving positions) - Chassis with open outer frame - Excavator trough at rear of chassis, 3,340 mm long and 874 mm wide Rear of vehicle - "Beveled 500 mm" design - Short 1,100 mm overhang from center of last axle - 2 integrated hydraulic supports for stabilizing the rear of the vehicle during loading operations 2-piece loading ramps with Super Grip surface - 2,600 + 1,200 x 720 mm - Upright hydraulic lifting unit with hand pump and cable extension - Hydraulic ramp adjustment Brake system - Dual-line full air brake system with diaphragm actuators - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring cylinders - ABV brake - Hydraulic connection - easyControl - Aluminum sideboards on 3 sides - Lift function (load-dependent) - Central lubrication system “BEKA-MAX” - Extendable widenings incl. infill planks, telescopically extendable up to 3,000 mm Technical Data Gooseneck Loading area (LxW) 3,700 x 2,480 mm Bevel: 1,080 mm Construction height above fifth wheel coupling 235 mm Fifth wheel height loaded 1,300 mm Steering radius rear 2,700 mm Steering radius front 1,350 mm Kingpin 3.5” Loading area Loading area (LxW) 11,000 x 2,750 mm Ncjdpfx Ajx Dqhkekcsw telescoping by 4,340 mm in increments up to (LxW) 15,340 x 2,750 mm including rear bevel 500 mm Loading height (loaded) approx. 885 mm (+/-100 mm) or 845 mm (+140/-60 mm) Chassis Wheelbase 5 x 1,510 mm Overhang 1,100 mm Steering 1st axle: fixed 2nd – 6th axles: hydromechanical forced steering (dual-circuit system)