Forestry vehicle

Pfanzelt MORITZ FR 75

Condition: new, Year of construction: 2024, operating hours: 3 h, MORITZ FR 75 (0010) VS.PS_RH-10575/6-II Pfanzelt Front-mounted winch (0020) Dimensions: (0030) - Tracked vehicle with rubber tracks, (0040) track width 300 mm (0050) - Hydraulically adjustable in width, (0060) from 1,200 mm to 1,600 mm overall width (0070) Telescoping via radio control (0080) - Overall length with mounted winch and (0090) rear blade approx. 2300 mm (0100) - Ground clearance: approx. 320 mm (0110) - Height, top edge of frame: approx. 1350 mm (0120) - Slope angle approx. 50° at the front and (0130) degree at the rear (0140) - Weight approx. 1.0 kg in (0150) standard configuration (0160) Engine: (0170) - Deutz diesel engine TD2.9L4, (0180) 4 cylinders, water-cooled, turbocharger (0190) - Power 55 kW / 75 HP (0200) - EU emission stage V (0210) - Fuel capacity: approx. 45 l (0220) - Hydraulic oil: approx. 30 l (0230) - Cleanfix reversing fan (0240) - Combined cooler for water / hydraulic oil (0250) Travel hydraulics: (0260) - Closed 2-circuit system (0270) proportional (2 x 11 kW), (0280) - all travel functions controllable via radio (0290) control (0300) - upstream fine oil filtration (0310) - Travel speed, stepless, from 1st (0320) gear 0-3 km/h and 2nd gear approx. 0-6 km/h (0330) - Maximum speed, steplessly (0340) adjustable (0350) - Drift adjustment to compensate for (0360) the lateral force on slopes during (0370) mowing operations across the slope (0380) - automatically hydraulically tensioned (0390) double idler wheel (0400) On-board hydraulics: (0410) - separate oil circuit, pump with approx. (0420) l/min at 200 bar (0430) - standard scope includes one proportional (0440) control valve (for lifting mechanism) with (0450) floating position (0460) - a total of up to 4 optional (0470) proportional double-acting valves (0480) and 2 on/off double-acting valves (0490) Chassis: (0500) - Torsionally rigid box-section frame made of (0510) special steel (0520) - Large lockable storage compartment (0530) integrated on the side of the chassis (0540) and a storage compartment on top (open) (0550) - Attachment points for securing the track (0560) - Large engine hood for maintenance work (0570) - Continuous underbody protection made of (0580) full steel (0590) - Surrounding branch guard with (0600) integrated hood protection (0610) - Standard rear lifting mechanism with max. (0620) lifting force at the coupling point: 11 kN (0630) - Optional front lifting mechanism with max. (0640) lifting force at the coupling point: 7 kN (0650) Operation of the entire machine: (0660) - Radio remote control for all functions (0670) - Emergency stop (0680) - Throttle control for the diesel engine (0690) - Fan reversing (0700) - Driving and steering (0710) - 1st and 2nd gear (0720) - Drift adjustment (0730) - Winch control (0740) - Raise/lower rear blade (0750) - Floating position of the lifting mechanism (0760) - Optional lifting mechanism relief (0770) - Width adjustment of the track frame (0780) - Direction reversing (steering reversal) (0790) - PTO shaft on/off (0800) - Auxiliary control valves (0810) - Winch operation / external consumer (0820) - Signal horn (0830) - Optional lighting (0840) ALL RADIO COMMANDS ON ONE CONTROL UNIT (0850) VS.PTO PTO-driven track (0860) - Maintenance-free, running in an oil bath and (0870) oil-cooled multi-disc clutch (0880) - PTO speed at the gearbox approx. (0890) 5/min at 2,100 RPM (0900) - Direction of rotation when looking at the stub Pjdpozw Rvbjfx Aixjgr (0910) in the PT

Condition: used, mileage: 1,001 km, driver cabin: other, gearing type: other, Vehicle location: Bovenden. Pgsdei Rnibepfx Aixer Superstructure: 10-ton winch from an IFA W50LA/A. Mounting from an IFA W50 LA/A. 10-ton pulling force, flange-mounted to the gearbox, with cable guidance to the front and rear. Year of manufacture cannot be determined! ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE, subject to changes, prior sale, and errors!