Swap chassis trailer

KÖGEL AW18 BDF Combi C715+C745 Wechselfahrgestell 22,5

Kögel AW18 BDF Interchangeable Chassis Kögel Combi Standard

----Standardized interchangeable container according to EN 284, size C715 and C745.
Standardized containers according to ISO 668/1496, size 20'.
4 container locking mechanisms on a 20' base.
----
Permissible total weight: 18,000 kg,

Weight: approx. 2,780 kg,

Payload: approx. 15,220 kg,

SAF axles,

Air suspension,

Disc brakes,

2x LED work lights at the rear,

1x LED work light at the front on the loading platform,

1x LED work light at the rear on the loading platform,

Underrun protection on the right, left, and rear,

ABS,

EBS,

ALB,

Wabco braking system,

Air connection red/yellow,

15-pole 24-volt connection,

ABS,

Raising and lowering system, 2 valves, 1st and 2nd axles,

Steel air reservoir,

Distance between Twist-Lock locking points LxB: 5,853 x 2,260 mm,

Front bridge stop,

Stop at the front up to the center of the locking mechanism: approx. 650 and 800 mm,

Adjustable and foldable front stop,

Gbedpfxezknlys Aaijp
Rockinger drawbar eye 40 mm,

Drawbar length: 2,340 mm,

Drawbar with height adjustment device,

Chassis height raised, unladen: 1,255 mm,

Loading height unladen (lowered): approx. 1,190 mm,

Loading height unladen (raised): at least approx. 1,380 mm,

External dimensions LxB: approx. 9,400 x 2,550 mm,

Length without drawbar/drawbar coupling: 7,470 mm,

Wheelbase: 5,040 mm,

Tires: 385/65R22.5 on steel rims,

Tire tread depth left front: 2 mm,

Tire tread depth left rear: 12 mm,

Tire tread depth right front: worn,

Tire tread depth right rear: 8 mm,

Additional equipment:
Axle load: 9,000 kg,
Permissible total weight: 18,000 kg,
Unladen weight: approx. 2,712 kg,
Payload: approx. 15,288 kg,
Wheelbase: approx. 5,040 mm,
Overall length: approx. 9,400 mm,
Overall width: approx. 2,550 mm,
Distance between locking points: approx. 5,853 mm,
Loading height unladen (driving position): approx. 1,255 mm,
Loading height unladen (lowered): approx. 1,190 mm,
Loading height laden (driving position): approx. 1,225 mm,
Loading height laden (raised): at least approx. 1,380 mm,
Suitable for the transport of standardized interchangeable containers according to EN 284, size C715 and C745,
Suitable for the transport of standardized containers according to ISO 668/1496, size 20",
Due to the arrangement of the underrun protection, rear-end loading is not possible,
Stop at the front up to the center of the locking mechanism: approx. 650 and 800 mm,
Distance from the center of the drawbar eye to the front edge of the interchangeable platform C745: approx. 1,940 mm,
Drawbar pivot range at 3° during operation: approx. +/- 130 mm,
Drawbar pivot range max.: approx. +/- 400 mm,
Distance from the center of the axle to the center of the drawbar bearing: approx. 860 mm,
Braking system according to ECE-R13,
Electrical system according to ECE-R48,
Steel lightweight frame,
Adjustable and foldable front stop,
Locking via 4 container locking mechanisms (twist locks), mounted on container beams according to DIN EN 284,
Turntable with ball bearing ring (diameter approx. 1,300 mm),
Front centering by guide rollers (approx. 100 mm diameter),
Rear centering by guide rollers (approx. 100 mm diameter),
Axles SAF INTRADISC with disc brakes diameter 430 mm, ET 120,
Air suspension with 22 mm travel,
Spray protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 for 2-axle trailers, consisting of 1 pair of quarter-circle fenders in front of the front axle, 1 pair of quarter-circle fenders

The listing was translated automatically. Translation errors are possible.