Manure spreader

Wienhoff 30m3 inklusive 30m Vogelsang Schleppschlauch

Tires (front): 800/60R32, Tires (rear): 800/60R32, Trailed, Trailing hose applicator, Tridem axle, Central lubrication, ISOBUS. Wienhoff Tridem slurry tank, year of manufacture 2012, and Vogelsang SwingMax 30, year of manufacture 2015. Wienhoff slurry tank, Tridem 30,000 liters: - Hot-dip galvanized tank with 6 mm thickness - 2.10 m tank diameter and 8.25 m tank length - 3 baffle plates and outlet recess - Tank and frame form a single unit - 2 steerable axles 1+3 with hydraulic cable steering - 150 air-suspended BPW axles with 410x180 brake drums - K80 drawbar coupling with a possible vertical load of 4.0 t - Hydro-pneumatic suspension of the drawbar - Hydraulic support leg on the drawbar - Tires: 800/60 R32 - Large wheel arches above axles 1, 2 and 3 - Effective volume: approx. 29.1 m³ - 2-circuit compressed air brake - Plastic mudguards - Underrun protection with truck lighting and 40 km/h TÜV approval - 14,400 l/min B&P compressor with automatic lubrication and 1000 rpm input speed - Hydraulic compressor adjustment for switching between suction and discharge - 8' Vogelsang accelerator on the suction arm - Suction nozzle front left 6 and 8 inches with 6 and 8-inch hydraulic slide valve - Outlet recess - Level indicator front with float - additionally with a large viewing window on top - Exact distributor with splash guard - 1 Garda system (Type Garda Turbo 9000): combination of a Garda centrifugal pump with a water-cooled compressor for suction and distribution - Distribution possible without a compressor - 8-inch suction arm (220 mm) hydraulically double-acting and double-jointed incl. suction turbine on top of the head - Preparation for the nitrogen sensor - 1st axle can be raised for short-term increase in vertical load - Pneumatic fluid displacement in the tank to transfer the vertical load - Top cylinder system at the front of the drawbar with 4 nitrogen accumulators and DBV valve (adjustable) - Preparation for the tire pressure control system, axles pre-drilled + bracket on the tank - Four-point hydraulics at the rear - Reversing camera (display in the CAN-BUS terminal) - Central lubrication system for approx. 55 lubrication points (axle unit + drawbar) - Central lubrication system also for the trailing hose system - 10' hose trough under the tank - Tank with 2-component paint in green - Lighting package: work lights LED left/right on the tank - Rotating beacon + additional rear lighting - Electro-hydraulic comfort control: (for the LS hydraulic system) Vogelsang SwingMax 30: - Working widths 30m, 27m 24m and 21m - 2x Vogelsang ECL distributor heads - Hose spacing 30cm - CFC partial width control - Year of manufacture 2015 - with impact plate - Slope compensation, Location: Customer
Ljdpfx Aozdg Afen Ijhh

The listing was translated automatically. Translation errors are possible.