Motorcycle trailer

BLYSS Moto III Motorradanhänger 210x122cm 750kgGG

Condition: new, empty load weight: 117 kg, maximum load weight: 633 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,250 mm, loading space width: 1,360 mm, total length: 2,880 mm, total width: 1,750 mm, tire size: R13, trailer brake: trailer unbraked, Neptun 2-Motorcycle Trailer PM2 - GN064 750 kg, tilting PM3 - GN202 (for 3 motorcycles) available at an extra cost * Standard configuration for 1-2 (1-3) motorcycles * NEW: Support wheel included as standard (may not be shown in all images!) * For PM2, the support rail can be moved to the center for transporting 1 motorcycle * Lightweight and compact branded trailer with versatile applications due to the tilting mechanism. * Excellent value for money. Also suitable for quads (a second ramp is available). * The platform can be tilted, reducing the angle of inclination and allowing motorcycles with low fairings or, for example, quads to be loaded. Technical data PM2 * Permissible total weight 750 kg, single-axle, unbraked * Payload 617 kg * Tare weight only 133 kg * Tire size 13 inches * Loading height approx. 45 cm * Internal dimensions 205 - 225 x 130 cm * Clear width between wheel arches 136 cm * Overall dimensions 288 x 175 x 78 cm * Width of support/loading rail inside 17-19 cm Technical data PM3 (extra cost) * Permissible total weight 750 kg, single-axle, unbraked * Payload 597 kg * Tare weight only 153 kg * Tire size 13 inches * Loading height approx. 45 cm * Internal dimensions 205 - 225 x 148 cm * Overall dimensions approx. 288 x 195 x 78 cm * Width of support/loading rail inside 17-19 cm Equipment: * Box-section drawbar, hot-dip galvanized * Galvanized base frame, low construction * Rubber-suspended axle with independent wheel suspension - maintenance-free * Manual tilting mechanism for minimal loading angle * 4 hooks for easy loading and securing of the motorcycle * 2 (PM3: 3) steel support rails, 18 cm wide, edged, galvanized, and 2 front wheel holders * 1 steel loading ramp, edged, galvanized * Stable construction thanks to cross members on the undercarriage and sturdy longitudinal members * 4 lashing eyes * Mudguards made of impact-resistant plastic * 2 front lights * Rear light unit with multi-function lights, and the license plate mounted in a protected position, 7-pole electrical system (adapter or plug change required for a 13-pole socket) * Tire size 13 inches * Vertical storage (standing upright) possible Extra cost Accessories available, e.g. (prices on request): * 100 km/h approval / derating on request * Additional loading ramp(s) * 13-pole plug installed * Adapter 13-pole to 7-pole Mini * Spare wheel 13 inches * Spare wheel holder underneath ---- Tjdpfovr Rzwox Agmoc > Many more trailers at >>> trelex.de * Financing and trade-in possible! * Huge selection: Over 200 trailers in stock, come and see us! * Competent and fair advice, fast processing. * Questions? Just call!

Condition: new, maximum load weight: 515 kg, overall weight: 750 kg, axle configuration: 1 axle, MOTOCAMP MOTORCYCLE TRANSPORTER Technical Data * Trailer type: Motocamp * Total weight: 750 kg * Payload: 515 kg * Internal dimensions: L: 200 cm, W: 100 cm * Floor: Aluminum diamond plate + multiplex wood floor * Lashing points: 6 pieces * Frame: Steel frame, welded, completely hot-dip galvanized, painted * Storage compartment: 41x33x34 cm * Tires: 195/55R10C * Axle manufacturer: AL-KO or KNOTT * Number of axles: 1 * Unbraked axle Tsdsthl Rrjpfx Agmoc * Support wheel: standard * Spare wheel * Bicycle carrier with mounts, for 2 bicycles * Aluminum loading ramps, foldable * Front wheel holder, lockable and adjustable Plus vehicle registration document / COC certificate: €49.99 Prices include VAT. A 100 km/h approval is only possible with a minimum unladen weight of the towing vehicle of 2500 kg! Illustrations may not correspond to the standard equipment, technical changes (e.g. tire sizes) are subject to change. Delivery: Delivery by freight forwarder is possible, €1.50 per transport kilometer one-way throughout Germany (Seesen to destination), minimum €270.00 plus VAT. Visit us also at: =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=. You can also obtain your desired trailer and accessories here by arrangement: B L Y S S transporttechnik GmbH Dieselstr. 8 85084 Reichertshofen Tel.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: B L Y S S transporttechnik GmbH Burenkamp 18-20 46286 Dorsten - Wulfen Tel =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=. FINANCING OR LEASING POSSIBLE

Condition: new, maximum load weight: 605 kg, overall weight: 750 kg, axle configuration: 1 axle, MOTO III Motorcycle Trailer Technical Data: * Trailer type: Moto III * Gross Vehicle Weight (GVW): 750 kg * Payload: 605 kg * Internal dimensions: L: 210 cm, W: 122 cm * External dimensions: L: 301 cm, W: 160 cm, H: 95 cm * Loading height: approx. 53 cm * Floor: 3 motorcycle securing rails with brackets + 1 ramp * Lashing points: lashing brackets on the frame * Frame: welded steel, hot-dip galvanized * Electrical system: 7-pin, 12V * Tires: 155/70R13 * Axle manufacturer: AL-KO or KNOTT * Number of axles: 1 * Unbraked axle Todouy Sqajpfx Agmsc A 100 km/h approval is only possible if the towing vehicle has a minimum unladen weight of 2500 kg! !!! Price valid while stocks last !!! plus vehicle registration document / COC certificate: €49.99 All prices include VAT. Visit us also at: =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.= You can also obtain your desired trailer and accessories here by arrangement: B L Y S S transporttechnik GmbH Sonnenbergstraße 5A 38723 Seesen Tel. .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: B L Y S S transporttechnik GmbH Dieselstraße 8 85084 Reichertshofen Tel. =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.= Illustrations may not correspond to the standard equipment; technical changes (e.g. tire sizes) reserved.

Condition: new, machine/vehicle number: AHW WM MSL, overall weight: 1,500 kg, loading space length: 2,510 mm, loading space width: 1,510 mm, loading space height: 100 mm, Would you like to purchase a hydraulically lowering trailer or open machine transporter immediately? Find a wide selection available for direct online purchase at our store. We always keep popular models in stock at fair prices. Take advantage of our attractive offers: New production—Transport Trailer Senklift MSL 1525/151, 251x151x10cm, 1500kg braked, single-axle low loader chassis with V-drawbar, hydraulically lowerable via hand pump, smart & safety locking system, side and front wall made of 10cm aluminum with yellow decor, 6 adjustable lashing rings, 2 centrally integrated lashing rings, reinforced 60mm jockey wheel, foldable stainless steel license plate bracket with rattle-free securing clip, front & rear position lights, and more. We are happy to equip the trailer with comprehensive and practical accessories for you. Sales and telephone order acceptance: Tsdpfx Ajy N Nwwegmec Mon. - Fri. 08:00–12:30 and 14:00–18:00 Or shop around the clock in our online shop at trailershop Images and the description in this advertisement are protected by copyright; logos are protected by trademark law. 05/26 MSL1525-151YELLOW

Condition: new, maximum load weight: 569 kg, overall weight: 750 kg, loading space length: 2,360 mm, loading space width: 1,250 mm, loading space height: 380 mm, loading space volume: 1.2 m³, color: other, construction height: 790 mm, working width: 1,710 mm, Manufacturer: Neptun Type: Low-bed trailer Trailwood N7-236, GN079 Permissible total weight: 750 kg Payload: 569 kg Unladen weight: 181 kg Box dimensions: 2360 x 1250 x 380 mm Tedsuclg Dopfx Agmsc Tires: 145/80 R13 75N Loading height: 510 mm Tiltable loading platform Equipment: Center-of-gravity tilting via drawbar bearing Loading grid, steel, galvanized, removable Practical quick-release fastener for the tipper Welded / hot-dip galvanized V-drawbar Continuous, non-slip screen-printed plywood floor 4 lashing eyes, foldable onto the loading platform, screwed to the frame Complete ladder frame made of galvanized steel profiles Side walls, multiplex screen-printed wood with frame and railing, steel, galvanized Rear wall, foldable and removable, retaining cables included as standard Angle lever locks Rear light carrier with multi-function lights Mudguards, impact-resistant plastic, black 7-pole plug (short adapter for 13-pole car socket available) Price includes vehicle registration document (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Cheval Liberte, Hapert, Brian James Trailers Upon request, we will provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories available on request. Subject to technical changes, price changes and errors. No liability is accepted for errors and printing errors. Rubber suspension axle, single-wheel suspension, tiltable loading platform, support wheel, side walls, multiplex screen-printed wood with frame and railing, steel, galvanized, unbraked, including warranty, center-of-gravity tilting via drawbar bearing, loading grid, steel, galvanized, removable, practical quick-release fastener for the tipper, welded / hot-dip galvanized V-drawbar, continuous, non-slip screen-printed plywood floor, 4 lashing eyes, foldable onto the loading platform, screwed to the frame, complete ladder frame made of galvanized steel profiles, rear wall, foldable and removable, retaining cables included as standard, angle lever locks, rear light carrier with multi-function lights, mudguards, impact-resistant plastic, black, 7-pole plug (short adapter for 13-pole car socket available)

Condition: new, empty load weight: 324 kg, maximum load weight: 976 kg, overall weight: 1,300 kg, axle configuration: 1 axle, Drive-on ramps and pits including drive-on ramp Side wall, railing and similar with colored powder coating, scratch and weather protection Chassis and frame optimum road holding thanks to test track-approved chassis with STEMA safety V-drawbar towball coupling with safety indicator partially hot-dip galvanized bolted chassis plastic scratch protection on towball coupling incl. jockey wheel Lighting equipment Todpfxjwwm Eno Agmjc modern multifunctional lighting with reversing lamp with rear fog lamp 13-pin plug, EC specification Wheels and axles robust rubber suspension axle maintenance-free compact wheel bearings impact-resistant plastic mudguards Lashing and securing options numerous lashing points

Condition: new, functionality: fully functional, empty load weight: 159 kg, maximum load weight: 591 kg, overall weight: 750 kg, axle configuration: 1 axle, Year of construction: 2026, Scope of delivery: 1x tiltable motorcycle trailer for two motorcycles, 750 kg Description: Special trailer designed for the transport of motorcycles, featuring a swiveling drawbar and a loading ramp located underneath the loading area. Support frame made from bent, galvanized steel profiles, bolted together with numerous lashing points for securing tie-down straps. Adjustable handle for securing the motorcycle wheel during transport. With the practical tilting drawbar, the trailer can be stored vertically to save space in your garage. This protects the trailer from weather exposure and also provides security against vandalism and theft. Technical data: Todpfx Ajylbktsgmjc - Tiltable - 13-pin connector - Connector holder - Adjustable handle - Plastic mudguards - Various lashing options - Ramp stored under the loading area with safety lock Gross weight: 750 kg Payload: 591 kg Unladen weight: 159 kg Overall width: 1,950 mm Overall length: 3,125 mm Overall height: 865 mm Loading area width: 1,550 mm Loading area length (with bracket): 2,300 mm Loading area length (without bracket): 2,050 mm Frame material: galvanized steel Intended use: Transport of motorcycles Jockey wheel: Yes Brakes: No Maximum speed: 80 km/h Tires: 155/70 R13 Channel dimensions: Width: 25 cm Length: 155 cm Approved for 100 km/h! Please observe current legal regulations/formulas regarding the towing vehicle including trailer. For self-collection, we can send the vehicle documents to you in advance free of charge!

Condition: new, functionality: fully functional, empty load weight: 265 kg, maximum load weight: 1,035 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,950 mm, loading space width: 1,630 mm, Year of construction: 2026, MARTZ Unilader 300 C 1.3T NEW VEHICLE Internal dimensions: 295cm x 163cm Total weight: 1300 kg Payload: 1035 kg Braked single-axle low-loader 1300 kg KNOTT axle with inertia brake, reversing assist, and handbrake Bolted and galvanized steel frame Drawbar, foldable With hydraulic support 15mm thick, robust, and non-slip screen-printed plywood floor 13-pole electrical system Plastic fenders Support wheel 13-inch M+S tires Numerous lashing points Front marker light Rear lamps with reversing light and triangular reflectors Foldable license plate holder 2x U-shaped chock Optional accessories: - 100 km/h upgrade - Rear supports - Steel side panels 40cm - Extension side panels - Grid superstructure - Drive-over rear door - Motorcycle support rail - Crank attachment to create a continuously adjustable tilting angle - Flat cover with or without bows - High cover - Mesh, coarse or fine - Spare wheel with holder Further accessories available upon request! Images are for illustrative purposes and may show optional accessories that are subject to an additional charge. Plus vehicle registration document and freight to Gera: €150 net Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate pickup. Tedpfx Agoww Eg Rjmjc The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or come directly to our location.

Condition: new, functionality: fully functional, machine/vehicle number: STM 02 13-25-15.1 rot, empty load weight: 343 kg, maximum load weight: 957 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,510 mm, loading space width: 1,530 mm, Sideboards, railings and more - Sideboards, railings and tarpaulins can be retrofitted Todpfjh Ewvrjx Agmec Loading ramps and recesses - Integrated recess for a loading ramp behind the license plate holder - Includes loading ramp with lateral anti-slip protection Chassis and frame - With colored powder coating, scratch and weather protection - Tow ball coupling with safety indicator - Optimal road handling thanks to a test track-approved chassis with STEMA safety V-drawbar - Tow ball coupling with safety indicator - Partially hot-dip galvanized - Bolted chassis - Support wheel Loading platform and floor - Continuous loading platform - With perforated sheet metal profiles - Three support rails with front wheel brackets - Front wheel brackets can be offset Lighting - Modern multi-function lighting - With reversing light - With rear fog light - 13-pin plug Wheels and axles - Shock absorbers for 100 km/h approval (DE) - Robust rubber suspension axle - Impact-resistant plastic fenders - Chocks with holder Lashing and securing options - Numerous lashing points - Perforated sheet metal profiles provide stable lashing points over the entire area. Documents and shipping costs - Shipping costs to us already included - Includes vehicle registration document (vehicle registration certificate part 2) - Includes COC document (EC certificate of conformity) - No further unwanted costs - Weight reduction possible for an additional charge (pure TÜV fee) Further offers and information can be found on our website. I am not allowed to link directly to it, so simply enter "Dapper Anhänger" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: 24721, empty load weight: 281 kg, maximum load weight: 569 kg, overall weight: 850 kg, axle configuration: 1 axle, loading space length: 2,100 mm, loading space width: 1,280 mm, Sideboards, railings, and more - Sideboards, railings, and tarpaulins can be retrofitted Loading ramps and recesses - Integrated recess for a loading ramp behind the license plate holder - Including loading ramp with lateral anti-slip protection Chassis and frame - Optimal road handling thanks to a chassis tested on a test track with a STEMA safety V-drawbar - Tow ball coupling with safety indicator - Partially hot-dip galvanized - Bolted chassis - Support wheel Loading area and floor - Continuous loading area - With perforated sheet metal profiles - Three support rails with front wheel brackets - Front wheel brackets can be offset Lighting - Modern multi-function lighting - With reversing light - With rear fog light - 13-pin plug Wheels and axles - Shock absorbers for 100 km/h approval (DE) - Robust rubber suspension axle - With reversing automatic function - Impact-resistant plastic fenders Tsdpfjiw Hh Ejx Agmec - Equipped with splash guards - Wheel chocks with holder Lashing and securing options - Numerous lashing points - Perforated sheet metal profiles offer stable lashing points over the entire area. Documents and freight costs - Freight costs to us are already included - Includes vehicle registration document (Part 2) - Includes COC document (EC certificate of conformity) - No further unwanted costs - Weight reduction possible for an additional charge (pure TÜV fee) Further offers and information can be found on our website. I am not allowed to link directly to it, so simply enter "Dapper Anhänger" in your search engine. Photos may show optional accessories. Errors, changes, and prior sale are subject to change.