Caravan

FENDT Opal 540 Klima+Mover+Markise+Solar

Condition: used, Year of construction: 2021, number of beds: 3, color: silver, first registration: 07/2021, total length: 5,790 mm, total width: 2,100 mm, total height: 2,235 mm, axle configuration: 1 axle, overall weight: 1,400 kg, Equipment: bathroom, Hymer Eriba Touring Troll 530 60 Years Edition Caravan with Self-Sufficiency Package and Bike Carrier, in near-new, hardly-used condition! ---- * Model/Year: 2021 * TÜV incl. Gas Inspection: New * Interior Height: 195 cm * Mass in roadworthy condition: 1077 kg * Beds: Rear double bed, transverse double bed * Sleeping areas: Front (198x98), Rear (198x140) * Heating: Truma S 3004 * Refrigerator volume: 70 l * Water supply: 30 l * Hot water supply (incl. boiler): 5 l * Previous owner: 1 * Colour: white/silver Special Features/Additional Equipment * "60 Years Edition" equipment package (sidewalls, front and rear in smooth aluminium sheet, colour white-silver) * GRP roof * Self-sufficiency package with 95A AGM battery * Electric hot water boiler with 5 l capacity (300 watts) * 30-litre fresh water tank installed in front left seat box * Thetford cassette toilet * Upgraded to 1400 kg * Fabric combination Janeiro * Transverse bed at the rear * Anti-sway hitch * Stone guard plate at the front * Fly screen roller blind at the entrance, user-friendly with side guide * Comfort upholstery with high backs and lumbar supports for the front seating area incl. additional cushion for bed conversion * Grand Oak furniture design * Gloss white locker doors with chrome handles * Countertop with anti-fingerprint finish * Sink cover with chopping board * Refrigerator with freezer compartment * Thule Caravan Touring twin bike carrier on drawbar * Spare wheel with holder underneath floor * Eriba 5-star double-spoke bi-colour alloy wheels * Warm air distribution for heating * Truma hot water heater * Rear external storage hatch, right side, 80 x 35 cm * 3-burner hob * 100 km/h approval * Awning light * 2 additional reading lights in the rear * 2 utensil pockets * Retractable entry step * Rear storage hatch, right side in the direction of travel, 80 cm x 35 cm Fpedsw Si Ruspfx Altjh ----Well-maintained caravan without any damage, new roadworthiness and gas inspection at delivery! Financing and part exchange possible! Subject to error and change!

Condition: new, empty load weight: 13,500 kg, maximum load weight: 51,500 kg, overall weight: 69,500 kg, axle configuration: > 3 axles, loading space length: 8,800 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 r17.5, color: grey, Equipment: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, length approx. 3,700 mm Rear gooseneck with bevel approx. 1,000 mm x 10° Cargo bed: Telescopic cargo bed, length approx. 8,800 mm, with rear chamfer approx. 500 mm x 10° Recess in the chamfer and protruding into the loading area to accommodate the excavator dipper arm Pneumatic locking with conical pin and reinforced locking positions The supply lines are protected in the extendable carrier and adapt to the respective loading area length Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Ramps can be moved individually hydraulically outwards by approx. 235 mm and inwards by approx. 215 mm Axles and suspension: BPW axles and suspension, two axles rigid, two axles self-steering Electromagnetic reverse lock via reverse gear and can be activated manually Air suspension with lifting and lowering valve Axle tool Tires: 235/75 R17.5 3PMSF dual tires Load index: 143/141J (144/144F) Brake system: WABCO brake system, EBS-E in accordance with EU regulations Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" Metallization: Standard HRM metallization of the outer frame Complete steel construction shot-peened, then the defined visible surfaces hot-finished with ZINACOR 850 (zinc 85% - aluminum 15%) metallization Steel construction: Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welder DIN-EN 287-1 tested MAG welding process according to EN ISO 4063 Shielding gas M21 according to EN ISO 14175 Accessories included: Steel front wall, pluggable, height approx. 400 mm ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets 24N connection in accordance with ISO-118524S connection in accordance with ISO-373115-pin connection in accordance with ISO-12098 Round NATO socket on the front connection strip Cable to supply the electro-hydraulic unit and/or the electric cable winch (35 mm2, 3.5 m long) between trailer and SZM with plug (NATO-NATO) 3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches 1 spare wheel with mounting adapter Outer support of the gooseneck with fastening holes for screw-in lashing ringsThe first hole approx. 200 mm from the front, then approx. every 400 mm 2 pairs of screw-in lashing rings included One fastening hole in the rear upper area of the outer beams of the gooseneck for a screw-in lashing ring 1 pair of screw-in lashing rings Approx. 40 mm thick hardwood covering above the gooseneck On the gooseneck 1 pair of plug-in aluminium drop sides on the side, approx. 400 mm high, anodized One plug-in aluminium rear panel on the gooseneck, approx. 400 mm high, anodized 2" kingpin Guide plate from the gooseneck for the saddle plate, approx. 500 mm wide 4 wheel chocks with holder Holder for ALU docking lights Mech. Saddle supports with 2-speed gearbox and crank Continuous hardwood covering on the cargo bed, interrupted between the axles, approx. 50 mm thick Locking of the cargo bed with conically welded locking profiles every 250 mm incl. pretensioning plate Slotted holes for attachable and movable bridging elements on the front of the cargo bed 1 intermediate table with stepped loading surface, approx. 300 mm wide for the pull-out tube with large cross-section with sheet metal covering Front and rear with Langl Fodpfxsk Ahuge Altjph

Condition: used, first registration: 04/2024, overall weight: 1,800 kg, Equipment: had accident, * Knaus Südwind 60 Years 2025 Drawbar cover, insect protection door, smooth sheet metal sidewalls, body door: PREMIUM, special "KNAUS 60 YEARS" decals, brand emblems on the front and rear in black, Campovolo Grey exterior design, gas package, AL-KO heavy-duty stabilizer jacks, increased payload to 1,800 kg (1,800 kg chassis), jockey wheel with integrated load indicator, 17" black alloy wheels, AL-KO AAA Premium Brake, TV pre-installation with socket and cable routing, external combo socket (power + TV), TV holder, atmospheric ambient lighting, additional power outlet package, smoke detector, triple bunk bed with wardrobe, upholstery: CASUAL SILVER, standard upholstery with "KNAUS 60 YEARS" sticker * Financing available Fpsdpfsxa Sw Sjx Alteh

Condition: new, color: white, total length: 9,400 mm, total width: 2,500 mm, total height: 2,780 mm, overall weight: 2,800 kg, Equipment: bathroom, Images of the vehicles may differ. Some vehicles have not yet been delivered. ----* Model 2025 * Permissible total weight: 2,800 kg * Circumference: 1,200 cm * Upholstery: Baltimore leather ----SPECIAL EQUIPMENT: * City water connection * Gas switch Duo Control CS with EisEx * Electric entry step * Fresh water tank 70 liters * Pump for shower drain * Permissible total weight 2,800 kg ---- Fpodpfxevz Rluo Altsh ----Subject to changes, prior sale, and errors! ----created with SYSCARA