Crane truck

Volvo FH 540 8x2 EFFER 955/8S + JIB 6S

Condition: new, empty load weight: 12,900 kg, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, suspension: other, tire size: 245/70 R 17,5, color: grey, operation weight: 12,900 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered hydraulically and removed -Technical fifth wheel load: 23,000 kg -For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading area: -Low bed with external supports in extendable "SUPER LOW" design, length approx. 6,850 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking Rear chassis: -Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear -2 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the trough -2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum axle and tires: -"PENDEL-AXLE", all axles hydromechanically forced steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint, painted in a single color in "FAY-Gray-34-0260" -Technical axle load: 12,000 kg -Hydraulic axle compensation Bledpfx Ajhlz R Sei Eoh -Tires 245/70 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories: -Preparation for screw-on container positioning for 1x 20ft or 1x40ft container on the outer supports -2" kingpins -A galvanized steel front wall approx. 400 mm high -One spare wheel -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Electro-hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and at the rear -European reflector signs (red-yellow) on the rear of the trailer -One holder for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -6 pairs of threaded blocks between the lashing rings under the top strap on the outer support for mounting screwable RUD rings VLBG-4 -ALU side walls and rear wall can be plugged into the gooseneck approx. 2,440 x 400 mm -The rear galvanized plug-in stanchions are removable (Length of the body approx. 2,560 mm) -Gooseneck in the rear upper area closed with a removable cover -5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Foldable extensions, approx. 230 mm per side -2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) -1 pair of steel ramps to bridge the hooks of the low bed -A painted layer of sand on the loading area as anti-slip protection -Speed sticker 80 km/h at the rear and on both sides -Dipper handle recess of the rear chassis closed at the rear with a plug-in plate -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm -Radio remote control for the steering in addition to the cable remote control, with indicator lights on the receiver as Alignment control -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 normal grease -Load pressure gauge for determining axle loads -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: new, functionality: fully functional, BERTOJA SEMITRAILER 13.80m NEW, READY FOR REGISTRATION Double galvanized hydraulic ramp Edge rail on neck Winch preparation Self-steering axle CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30 AM - 7:00 PM / SATURDAY 8:30 AM - 2:00 PM Bedexpi A Ropfx Ai Eolh WE OFFER A LARGE SELECTION OF USED MULTI-BRAND COMMERCIAL AND INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semitrailer-Refrigerated Semitrailer Tipper – Lamberet - Schmitz Isuzu-Fixed body-Crane-Tipper- 4 axles -4 Rear Axles -Tway-T-Way-540- 460 hp - Xway-X-Way-Trilateral - V8 - Scania - Frost Edition Curtain Sider-Box body-Liftgate - Refrigerated Cell- Insulated with Fridge - Van Domenico Truck srl declines any responsibility for any discrepancies in technical specifications, options, and features, which may in some cases differ from those described. We invite you to verify the specifications of the specific vehicle.

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, first registration: 03/2015, loading space length: 134,450 mm, loading space width: 2,550 mm, loading space height: 480 mm, suspension: hydraulics, Year of construction: 2015, Equipment: ABS, = Additional options and equipment = - Central lubrication = Further information = Bljdpfx Aiovtc Aie Esh Axle configuration Suspension: hydraulic suspension Rear axle 1: Max. axle load: 12,000 kg; Steered Rear axle 2: Max. axle load: 12,000 kg; Steered Weights Unladen weight: 12,660 kg Payload: 34,340 kg Gross vehicle weight: 47,000 kg Functional Loading platform height: 48 cm Extendable body: Yes Condition Technical condition: very good Visual condition: very good Financial information Price: On request Further information Contact David F Middelman for more information.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: WMAN08ZZ8FY326339, mileage: 99,700 km, power: 213 kW (289.60 HP), first registration: 02/2015, fuel type: diesel, empty load weight: 15,500 kg, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, brakes: intarder, color: yellow, gearing type: mechanical, suspension: steel, Year of construction: 2015, Equipment: ABS, crane, differential lock, onboard computer, LOCATION: 73230 Kirchheim unter Teck -- Böcker AK 44 / 400 on MAN TGM 18.290 4x2 BL First registration: 08.08.2015 VIN: WMAN08ZZ8FY326356 -- CHASSIS MAN TGM 18.290 4x2 BL Weight variant: 8,000 kg / 11,500 kg Front axle: steel suspension, axle load 8 t Rear axle: steel suspension, axle load 11.6 t, differential lock Engine: MAN 6-cylinder diesel, 213 kW (290 hp) / Emissions standard EURO 6 Transmission: 8-speed manual gearbox with reduction Retarder: Intarder, engine brake Tyres: front axle 315/55 R22.5 | rear axle 1 + 2 tyres 315/80 R22.5 Cab: type C, short cab, comfort driver's air-sprung seat Bodsw Igglepfx Ai Eolh BÖCKER SUPERSTRUCTURE CRANE OPERATION - Maximum boom length: 44.00 m (with 2 m mechanical extension) - 500 kg lifting capacity at 28.00 m - 1000 kg lifting capacity at 21.00 m - 2000 kg lifting capacity at 14.00 m - 4000 kg lifting capacity at 8.20 m ACCESS PLATFORM - Maximum working height: 41.5 m - Slew range approx. 620 degrees - 100 kg at 33 m - 250 kg at 30 m OTHER FEATURES Radio remote control Work cage optional Further equipment features on request. Vehicle from first owner – very good condition – immediately available ex stock Kirchheim unter Teck.

Condition: used, mileage: 365,385 km, power: 397 kW (539.77 HP), first registration: 04/2018, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 4,300 mm, fuel: diesel, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 11,100 mm, total width: 2,550 mm, loading space length: 6,940 mm, loading space width: 2,490 mm, loading space height: 1,200 mm, Year of construction: 2018, Equipment: ABS, AdBlue, central locking, crane, cruise control, differential lock, electric window regulation, parking heater, power assisted steering, retarder, seat heater, traction control, = Additional Options and Equipment = - Electric power steering - Remote central locking - Refrigerator - Leather interior - Lift axle - Air suspension - Engine brake - Hub reduction - PTO - Radio - Reversing camera - Sun visor - Spotlights - Auxiliary heater - Toolbox = Notes = Hiab 548E-9 4 x hydraulic outriggers. 9 x hydraulic extensions. Radio remote control. 2.20 m - 18,000 kg. 4.70 m - 9,600 kg. 6.20 m - 6,900 kg. 7.90 m - 5,100 kg. 9.70 m - 3,900 kg. 11.50 m - 3,100 kg. 13.50 m - 2,500 kg. 15.60 m - 2,060 kg. 17.60 m - 1,760 kg. 19.70 m - 1,540 kg. 21.70 m - 1,380 kg. Loading box: 694 cm x 249 cm. Loading height: 120 cm. Trailer coupling. = Further Information = Technical Information Number of cylinders: 6 Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Steered; Left tire tread: 20%; Right tire tread: 20%; Suspension: Leaf suspension Rear axle 1: Tire size: 295/80R22.5; Twin tires; Left inside tread: 15%; Left outside tread: 15%; Right inside tread: 15%; Right outside tread: 15%; Suspension: Air suspension Rear axle 2: Tire size: 295/80R22.5; Twin tires; Left inside tread: 15%; Left outside tread: 15%; Right inside tread: 15%; Right outside tread: 15%; Suspension: Air suspension Rear axle 3: Tire size: 385/65R22.5; Steered; Left tire tread: 50%; Right tire tread: 50%; Suspension: Air suspension Weights Unladen weight: 22,775 kg Bsdpfsx Iggmsx Ai Eolh Payload: 14,225 kg Gross vehicle weight: 37,000 kg Functional Crane: Hiab Interior Upholstery: Leather Financial Information Price: On request Identification Type number: FH 540 / 8x4*4 / HIAB 548E-9 CRA = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT). Russian spoken. We make every effort to provide correct information, but no rights can be derived from the information provided.

Condition: used, mileage: 85,600 km, power: 552 kW (750.51 HP), first registration: 05/2022, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, Fifth wheel plate 40 mm towing eye coupling Flatbed Truck is equipped with all extras, full list can be sent by email. Effer loader crane 2055 8 S with 3 mechanical extensions Jib 6 S Heavy Duty with 2 mechanical extensions Bodpfxoy Ahc Es Ai Eelh 8 hydraulic extensions on main boom – 19.40 m / 6,100 kg 6 hydraulic extensions on jib – 31.63 m / 1,800 kg plus 2 mechanical extensions – 35.6 m / 1,250 kg Approval for work basket and adaptation for work basket Front stabilizer legs 50 t 100% lifting capacity at 360 degrees, no load moment limitation All extras available by email

Condition: used, mileage: 86,472 km, power: 375 kW (509.86 HP), first registration: 04/2019, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: beige, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Truck: VOLVO FH 500 8X4 BL lift axle I-Shift top equipment Condition: very good, 7400 engine hours, 4900 PTO hours Tires: 60-90% Bodpfx Aewr Sw Eei Eolh Body: rear platform extendable Crane: FASSI F545RA.2.26 XE-DYNAMIC 6+4 jib

Condition: used, mileage: 129,252 km, lifting height: 38,000 mm, Year of construction: 2015, Application: Construction Drive: Wheel Unladen weight: 27,875 kg Lifting capacity: 23,800 kg Bedpfxsw A Hb Tj Ai Eslh Serial number: 122024 Front tyre condition: 70% Rear tyre condition: 70% Transport dimensions (L x W x H): 11.1 x 2.55 x 3.9 m Contact PFEIFER GROUP for further information.

Condition: used, mileage: 129,754 km, power: 368 kW (500.34 HP), first registration: 07/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2028, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, crane, Internal vehicle number: VTC30026 German vehicle Available immediately at our yard in Kaufungen - Kassel, Germany More INFO from: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Platform dimensions [mm]: 6400 x 2550 Palfinger PK53002 SH 1159 operating hours 4m – 10,800 kg 6m – 7,600 kg Bodpsyrv Tcefx Ai Eolh 8m – 5,700 kg 10m – 4,450 kg 12m – 3,650 kg 14.5m – 3,050 kg ELBO PCS trailer (included in vehicle price) EUR 17,900 Ref. No.: VTC30018 Year of manufacture: 2023 Current weight: 4,650 kg Permissible payload: 13,350 kg Overall dimensions: 8,250 x 2,550 mm Loading area dimensions: 6,400 x 2,550 mm Tyres: 235/75 R17.5 Suspension: Air suspension Brakes: Drum brakes Hydraulic ramps Errors excepted. We will gladly accept your used vehicle in part exchange. Financing is available directly through our company. GOLEC NUTZFAHRZEUGE GMBH Languages spoken: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----.

Condition: new, overall weight: 58,000 kg, Year of construction: 2026, Low loader semitrailer MAX100 4 A 8.60 U Technical data Speed 80 km/h Total weight 60,800 kg Bodpfx Ajg Sk T Doi Eolh Fifth wheel load 18,000 kg Axle load 42,800 kg Empty weight Payload Gooseneck length 3,850 mm Fifth wheel height loaded 1,250 mm Loading area length 8,600 mm Extendable by 5,400 mm Axle spacing 1,360 mm Rear steering radius 2,300 mm Loading height with max. load 860 mm Total width 2,540 mm Suspension travel -55/+145 mm Technical description Gooseneck With bevelled corners at the front 45° and with rear bevel of approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring 30 mm thick Loading area in extendable version with rear slope of approx. 1,000 mm x 8° 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) 1 pair of lashing rings lying in the front of the loading area (LC 10,000) Hardwood flooring approx. 48 mm thick, checkered plate above the axles Ramps Two-part steel ramps A pair of galvanized two-part steel ramps approx. 2750 +1400 mm x 800 mm with approx. 48 mm thick hardwood flooring Ramp with hydraulically foldable and retractable ramp parts, hydraulic lifting mechanism and hydraulically movable. Maximum load per pair 40,000 kg Tires 235/75 R 17.5 Brake system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Paintwork First-class, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by 2-component zinc dust primer a high-quality 2-component (2K) top coat in a single color in RAL colors of your choice Rear section metallized and painted in RAL 9010 (pure white). Seat supports: JOST seat supports (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Steel construction made of high-strength fine grain steels. Steel qualities: Steel construction made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system in accordance with EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection panel at the front with sockets 24N, 24S & 15-pin. Connection in accordance with ISO. 24N IS0-1185 24S IS0-3731 15-pin IS0-12098 Accessories included: A galvanized steel front wall approx. 400 mm high. 2" kingpin 4 pieces of brake shoes with holder on the bulkhead. A holder for a rotating beacon at the rear of the trailer. SAF axles, two axles rigid, one axle with self-steering, air-sprung, with drum brake, with lifting/lowering function. The self-steering axle with electro-magnetic reversing lock can be activated via reverse gear or manually. Axle tool. Holder in the rear area of the gooseneck for aluminum loading ramps. Galvanized folding supports under the slope of the loading area. Mechanical locking of the loading area. A spare wheel with holder in front of the bulkhead. Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer. Yellow-red air couplings on the galvanized connection strip at the front. On the gooseneck and on the rear panel on the left and right there is a holder for the warning signs including a socket. A mud flap at the rear of the trailer. Manual and description On the gooseneck, plug-in aluminum side walls and rear wall approx. 2,440 x 400 mm (LX H). The rear galvanized plug-in stanchions are removable. Length of the body approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container