Midi excavator

Takeuchi TB 290-2

Condition: good (used), functionality: fully functional, power: 51.6 kW (70.16 HP), fuel type: diesel, color: original, operation weight: 8,965 kg, number of seats: 1, Year of construction: 2023, operating hours: 950 h, Equipment: UVV, additional headlights, adjustable boom, air conditioning, cabin, hammer hydraulics, low noise, onboard computer, rubber tracks, We are pleased to offer you a used Takeuchi TB 290-2 CV V4 mini excavator. The machine is equipped with: - Operating weight: 8,965 kg - Engine output: 51.6 kW - Transport length: 6,575 mm - Transport width: 2,200 mm - Transport height: 2,550 mm - Maximum reach: 7,125 mm - Digging depth: 4,410 mm - Attachments: Powertilt, Taklock quick coupler system, electric grab switching ENGINE AND HYDRAULICS - Engine model: 4TNV98CT - Engine output: 51.6 kW / 70.0 hp - Diesel particulate filter - Automatic rpm reduction system - Engine speed reduction via joystick button - Two-speed travel drive with automatic shift - Automatic engine shutdown - 1st programmable auxiliary circuit with proportional control + s/w - 2nd programmable auxiliary circuit with proportional control Iijdsxvw S Tepfx Ankja - 3rd auxiliary circuit for hydraulic quick coupler - 4th programmable auxiliary circuit with proportional control (electrical Powertilt switching) - Auxiliary hydraulics installed up to the dipper arm with high-pressure shut-off valves - Servo control for work and drive hydraulics - Load-sensing hydraulic system - Accumulator to relieve the auxiliary hydraulics SAFETY AND LIGHTING - Overload warning device + pipe rupture protection - Single key system for all locks - Lashing and transport securing lugs: 4 pcs. - Complies with EU directives, with TÜV, BG-BAU, and CE certification - Rearview camera - LED work lights: 6 pcs., rear LED warning lights (red): 2 pcs. BOOM AND UPPERSTRUCTURE - Offset boom - Load-hold valves on lift, arm, and boom cylinders - Boom swing angle (L/R): 70°/60° - Electric refueling pump with auto shut-off - Upward exhaust outlet - Safety cab OPG Level 1, ROPS - Air-suspended driver's seat - Radio - Automatic climate control - Separate 12 V socket on cab roof - Storage compartment with onboard tools UNDERCARRIAGE - 450 mm rubber tracks with automatic hydraulic track tensioning - Reinforced counterweight - Dozer blade width: 2,200 mm, height: 500 mm Ready for immediate use. Please contact us if you have any further questions. The contents of our offers have been created with the utmost care. However, we cannot guarantee the accuracy, completeness, or timeliness of the information and prices provided.

Condition: used, Year of construction: 2018, operating hours: 9,224 h, Equipment: air conditioning, = Additional options and accessories = Ijdsxx Splspfx Ankeia - Automatic/hydraulic quick coupler - Hammer/shear hydraulics = Further information = Unladen weight: 15,420 kg Please contact Geert Geuens for more information.

Condition: used, Year of construction: 2017, operating hours: 8,333 h, Equipment: all wheel drive, Takeuchi TB 290 Mini Excavator Tracks: see pictures Tilt Quick coupler with swing motor Lehnhoff HS08 Iiedjyqlvqjpfx Ankea Operating weight: 8,400 kg Engine power: 51.6 kW Adjustable boom Air conditioning Immediately available Errors and omissions excepted We offer: Net purchase available for companies within the EU with a valid VAT ID number and for customers from third countries (non-EU). Leasing and financing options. Complete handling of all customs formalities. Issuance of short-term and export license plates. Transport to the port. All prices listed on classified ads are gross prices and already include the statutory VAT of 19%.

Condition: excellent (used), functionality: fully functional, power: 54.6 kW (74.24 HP), fuel type: diesel, color: original, tire size: 7.50-15, number of seats: 1, first registration: 11/2024, Year of construction: 2024, operating hours: 650 h, machine/vehicle number: 020, Equipment: UVV, additional headlights, adjustable boom, air conditioning, cabin, cruise control, hammer hydraulics, hydraulics, low noise, onboard computer, We are pleased to offer you a Takeuchi TB 370W V3 mobile excavator. - Used machine - The machine is equipped with: - Operating weight: 7,455 kg - Powertilt (2 x 90°) with hydraulic quick coupler Lehnhoff HS08 DL - Taklock T1-3 including leakage oil line - Leakage oil return line to tank - Maximum reach: 6,705 mm - Maximum digging depth: 3,775 mm - Maximum dumping height: 5,290 mm - Transport length: 6,025 mm - Transport width: 2,100 mm - Transport height: 2,890 mm - Engine power: 54.6 kW - DOC, DPF - Arm LSA: 1,900 mm - Engine model: V2607 - 1st programmable auxiliary circuit (pressure and flow rate) with proportional control + switch - 2nd programmable auxiliary circuit (pressure and flow rate) with proportional control - 3rd auxiliary circuit for hydraulic quick coupler - 4th programmable auxiliary circuit (flow rate) with proportional control - Multi-functional joystick with five separate proportional controls for the 1st, 2nd, and 4th auxiliary circuits, as well as for dozer blade and boom offset - Automatic pressure discharge SP 1 and 2 - Auxiliary hydraulics installed up to the dipper arm with high-pressure shut-off valves - Automatic engine speed reduction system - Electric refueling pump with automatic shut-off - Cruise control, adjustable in 20 steps - Upward-facing exhaust outlet - Load-holding valve on lifting, arm, and adjustable boom cylinders - Overload warning system + hose rupture protection (according to EU standard EN 474-5 Lift Safety Device) - Boom swing angle (L/R): 79° / 51° Iisdpfsw Rnctjx Ankoa - Safety cab: OPG, ROPS - Air-suspended driver seat, floating consoles, radio, automatic climate control - Work lights LED: 6 pcs, side lights LED: 2 pcs, rear warning lights LED red: 2 pcs - Separate 12 V socket on cab roof - Single-key system for all locks - Pressure accumulator for relieving auxiliary hydraulics - Automatic hydraulic tank pre-charge valve - Servo control for work and travel hydraulics - Electrically switchable changeover valve for pressureless return when operating a hydraulic breaker - Separate travel hydraulic pump - Load-sensing hydraulic system - Automatic oscillating axle lock - Automatic brake function for excavator operation - 8x 7.50-20 tires - Two storage compartments with on-board tools and for lifting accessories - 270° surround view camera - Lashing and transport securing eyes: 4 pcs - Dozer blade width: 2,100 mm - The machine complies with EU directives and is TÜV, BG-BAU, StVZO, and CE certified - Takeuchi Fleet Management ready Contact us if you have any further questions! The details of our offers have been prepared with the utmost care. However, we cannot guarantee the correctness, completeness, or current validity of the contents and prices.

Condition: used, power: 55 kW (74.78 HP), Year of construction: 2016, operating hours: 4,387 h, Used Wacker Neuson ET145 Hydraulic Excavator – 2016 – For Sale at BIG Machinery This Wacker Neuson ET145 hydraulic excavator, manufactured in Austria in 2016, is available for sale at BIG Machinery in the Netherlands. The machine is CE-certified and features hydraulic hammer lines, a 2,500 mm dozer blade, and 500 mm track shoes with rubber pads, making it ideal for construction, earthmoving, and general excavation applications. The air-conditioned cab offers a comfortable working environment, and the unit is delivered with two buckets: a 2,000 mm tilting bucket and a 550 mm ditch cleaning bucket. • Year: 2016 • Condition: Used • Country of manufacture: Austria • Certification: CE certified • Operating hours: 4,387 • Cabin: Air-conditioned • Hydraulic system: Hammer lines • Track shoes: 500 mm with rubber pads • Dozer blade: 2,500 mm • Buckets included: 2,000 mm tilting bucket 550 mm ditch cleaning bucket Interested in this Wacker Neuson ET145? Contact BIG Machinery for further information, to arrange an inspection, or to request a quotation. We offer worldwide delivery and can organize complete export documentation and transport from our headquarters in the Netherlands. Why Choose BIG Machinery? With over 30 years of experience in trading new and used equipment, BIG Machinery offers you expertise and reliability. Based in the Netherlands, our dedicated team and in-depth knowledge of sea freight ensure prompt and reliable global deliveries. We guarantee competitive market prices, carefully selected equipment, and reliable long-term partnerships. Iodpoyind Esfx Anksia With in-house logistics, we provide smooth and efficient support throughout the entire process. Choose BIG Machinery as your trusted partner and discover why customers around the world prefer us. Quality, speed, and reliability – Buy BIG! = Further Information = Operating weight: 15,278 kg Width: 250 cm CE mark: Yes

Condition: used, Year of construction: 2013, operating hours: 6,979 h, Equipment: air conditioning, = Additional options and accessories = - Automatic/hydraulic quick coupler - Hammer/shear hydraulics Ijdpfxeyzgxvj Ankjia - Grading bucket - Standard digging bucket = Remarks = Hydraulic tilting bucket = Further information = Operating weight: 8,465 kg Please contact Geert Geuens for more information.