Wheel excavator

Liebherr LH 24 M Litronic / Greifer / Hochf. Kabine

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Fedpfx Afogcw Rmsnsga Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: used, maximum load weight: 28,240 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2013, loading space length: 9,500 mm, loading space width: 2,350 mm, loading space height: 2,400 mm, loading space volume: 50 m³, Year of construction: 2013, Equipment: ABS, Air, lift, MB disc, EBS, aluminum rims, fall supports, lean-to ladder, PVC half-shell mudguard, UFS foldable, trough made of HB 450 floor 4mm, side walls 3.2mm thick, rear wall 1/2 + 1/2, ladder and walkway, roof frame, loading pressure gauge, 2xWZK, roll-up tarpaulin with central locking Fjdjuwhruepfx Afnoga

Condition: used, mileage: 406,578 km, power: 100 kW (135.96 HP), first registration: 11/1997, fuel type: diesel, fuel: diesel, color: blue, gearing type: mechanical, emission class: euro2, number of seats: 2, total width: 2,500 mm, loading space volume: 8 m³, loading space length: 4,500 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 1997, Equipment: ABS, EBS, crane, trailer coupling, Engine capacity: 4.249 cc GVW: 7.490 kg Crane: Palfinger Selling price: € 12.000, US$ 13.870 Purchase on credit is possible: Yes Fedpfext Tnfex Afnoga Leasing is possible: Yes

Condition: used, empty load weight: 5,600 kg, maximum load weight: 25,900 kg, overall weight: 31,500 kg, axle configuration: 2 axles, first registration: 10/1993, loading space length: 6,800 mm, loading space width: 2,340 mm, loading space height: 1,200 mm, loading space volume: 19 m³, total length: 2,500 mm, total width: 3,100 mm, suspension: air, tire size: 385 / 65 R 22,5, color: grey, mileage: 1,001 km, fuel type: diesel, gearing type: other, driver cabin: other, Vehicle location: Bovenden, aluminum body, 2-axle, BPW axles, air-sprung, roller tarpaulin, catwalk, flap, folding U-protection, chute Body: Aluminum box body approx. 19m³ ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Fjdsvhhm Ajpfx Afnjga - .

Condition: used, mileage: 351,885 km, power: 294 kW (399.73 HP), first registration: 12/1996, fuel type: diesel, empty load weight: 11,800 kg, maximum load weight: 14,200 kg, overall weight: 26,000 kg, tire size: 315 / 80 R 22,5, axle configuration: 6x2, wheelbase: 4,200 mm, brakes: constant throttle, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: air, number of seats: 2, total length: 2,500 mm, total width: 3,250 mm, Equipment: ABS, cabin, trailer coupling, Vehicle location: Bovenden, Kz. house, 1x air seat, rear window, electric mirror, heated mirror, electric window left, electric window right, sun visor, switch 16, ABS (anti-lock braking system), constant throttle, air suspension, tow bar air-light-hydr., environmental badge red Fodovhg Ryopfx Afnoga Wheelbase: 4200 mm Body: Marrel hook MA 26.70 for 6.5 m container VA wheels 385 / 65 R 22.5, 6-cylinder turbo engine!!! converted to 6x2 ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength? Aggregate chassis made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering? Wabco Smartboard? electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment)? 1st + 3rd axle separately liftable with traction aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension Fedpfx Afjgcw Rijnjga Tires and wheels 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel + approx. 120 kg) Seatposts Aluminum drop supports, Made of aluminum alloy, 2 - 10 tonne support load, we use swivel feet for air suspension Brake system according to E.E.G. standard, dual-line braking system, EBS E - system Wabco with RSS system (roll stability support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical system according to the STVZO guidelines with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear end, 24 volt system with lx 15-pin and 2x 7-pin socket, with side contour lights in LED design, 2 work lights at the rear, 2 LED work lights on the side at the height of the seat supports, 1 LED work light inside at the front left can be operated from the outside Structure/trough "structure fully welded inside" Front wall load 17,250 dkn? Rear and side walls 10,250/13,400 dkn aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside ! ! , floor as moving floor system laid on 140 mm aluminum cross beams, floor stacker load approx. 7 ton/m2 cross beams mounted accordingly closely (approx. 350mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design smooth rear wall in straight design with 2 aluminum wing doors 50/30mm thick with 4 rotating rod locks in the welded aluminum rear frame fixed in Teflon bearing and stainless steel bearing. ,running aluminum wall suspended in the reinforced aluminum top belt with "Kevlar tarpaulin" for complete emptying, side brush seal and additional Kevlar tarpaulin on the side, integrated discharge funnel with folding cover plate in the floor closure, operable from the outside on the left at the back, viewing window on the left at the back, 1 test slider in each of the rear doors, so 2 pieces, service door on the left in the front wall Hydraulic system "Cargo Floor" 24 board system - smooth design! Push floor system in the floor with hydraulically moved aluminum profiles mounted on aluminum square profiles with approx. 880 PE-HD sliders, approx. 8mm floor thickness, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, power supply at the rear left with cable operation in a lockable waterproof box, without hydraulic hoses Accessories PVC mudguard with rubber mud flaps, aluminum spare wheel holder, side

Condition: used, mileage: 394,000 km, power: 330 kW (448.67 HP), first registration: 05/2015, fuel type: diesel, overall weight: 33,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2026, color: green, emission class: euro6, loading space volume: 10 m³, loading space length: 5,000 mm, loading space width: 2,440 mm, loading space height: 850 mm, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), Well-maintained three-way tipper Arocs 3345 with Meiller three-way tipper and Bordmatic. Special equipment: Trailer brake 2-line system, audio system: CD radio (Bluetooth), roof access step with handrail, exhaust pipe routed up behind the cab, batteries mounted vertically, air horn, cab: steel suspension, comfort specification, suspension: rear springs 2x15.0 t, transmission: 12-speed type G 330-12, heavy-duty rear lights (construction site version), hydraulic pump (Meiller pump – 7 pistons – 275), 10.4 cm info display with additional indicator, cab air filter for construction vehicles, checker plate fenders, aluminium, fuel tank: 290 litres steel, left side, air intake behind cab, retarder, disc brakes front axle, drum brakes rear axle, reinforced rear cross member, driver’s seat: comfort suspension seat, external sun visor, side window sun blind driver’s side, steel wheels 9.00x22.5, external storage compartment left, additional 24V socket in passenger footwell, stone guard, road paver package, folding rear underrun protection, straight front axle, increased ground clearance. Fgjdpsyxcraefx Afnoa Further features: EURO 6 emission standard, ABS switchable, axle configuration: 6x4, front axle load 7.5 t, trailer socket 24V / 15-pin, Arocs, exterior mirrors electrically adjustable and heated, 170 Ah battery, rear axle differential lock, compressed air coupling in cab, steel air tanks, cab width 2.30 m, cab: movable step entry, cab hydraulic tilting, cab: M ClassicSpace, cab floor with 170 mm engine tunnel, suspension: leaf/leaf, front spring 7.5 t, 3-leaf, electric windows, tinted windscreen, 100 A alternator, AdBlue tank: 60 litres, manual tilting steel sunroof, rear axle: 300 crown wheel, pollen filter, body/superstructure: tipper, non-variable power steering pump, 2-cylinder air compressor, heated air dryer, engine: 12.8 litre – 330 kW inline-six diesel (OM 471), engine brake, engine compartment encapsulation, PTO MB 131-2c, wheelbase 3300 mm, kerb mirror, residual heat utilisation, rear wall window, fully protected disc brakes, seat upholstery: fabric, passenger functional seat, front axle stabiliser, 24V cab socket, tachograph / EC control device, toll equipment preparation, regulated water pump, gross vehicle weight 33.00 t, gearbox oil cooler. CB radio system Tire condition approx. 60% Errors and prior sale reserved.

Condition: used, maximum load weight: 30,195 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2022, loading space length: 10,600 mm, loading space width: 2,330 mm, loading space height: 2,300 mm, loading space volume: 57 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Steel rear tipping body approx. 57 cbm, double-wing rear door with rotary latch, 2 x grain chutes with covers, roll tarp, loading pressure gauge, HYVA tipping cylinder, JOST landing gears, ABS, EBS, SCB ROTOS axle(s), disc brake system, air suspension with lifting/lowering device, lift axle, automatic lowering of air suspension during tipping, vehicle may be stickered and/or signwritten with advertising, tow coupling SI85889 Fgjdpfjwm T Eysx Afnja Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops! The vehicle may be stickered and/or signwritten with advertising. Our general terms of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this unit. Please contact us!

Condition: used, Year of construction: 2012, operating hours: 17,383 h, Serial number: 825.0.1916 Magnetic system Operating hours: 17,383 MAXCAB - CABIN TELESCOPIC - RAISABLE Automatic climate control Rear and side monitoring with camera Outrigger support front + rear Central lubrication system Bucket handle: 4,850 mm Tires: 10.00 - Changes, prior sale and errors are expressly reserved. The description serves to generally identify the vehicle and does not constitute a guarantee in the sense of sales law. The description according to the purchase contract is decisive. Fedsrqb Dfjpfx Afnoga Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply.

Condition: used, functionality: fully functional, mileage: 330,000 km, power: 110 kW (149.56 HP), fuel type: diesel, maximum load weight: 2,900 kg, wheelbase: 3,050 mm, fuel: diesel, color: white, emission class: euro6, Year of construction: 2015, ✅ MAN TGL 8.150 4x2 BL – KTLC Aluminum Beverage Body – 6 Bays – Ready to Work! 📍 Location: Krakow, Poland 📅 Chassis year: 2015 📅 Body year: 2015 *The photo was taken after the rebranding. 🚛 Chassis: MAN TGL 8.150 BL Engine: D0834LFL66 – 150 HP / 110 kW – EURO 6 Transmission: ZF 6S-800 OD – manual, 6-speed Fjdpfx Aew Eu Dhjfnjga Drive: 4x2 Suspension: Front – parabolic leaf springs | Rear – air suspension Brakes: Disc brakes with ABS / ASR / ESP Wheelbase: 3050 mm GVW: 7,490 kg Max speed: 89 km/h (electronic limiter) Cruise control, digital tachograph, power windows, central locking, no air conditioning. Fuel tank: 100 L diesel + AdBlue Day cab C – 2240 mm wide – with air-suspended comfort seats 🧊 KTLC High Boy Aluminum Body – 6 BAY Configuration Overall body length: 4256 mm Overall height: approx. 2800 mm Overall width: 2400 mm Bay width: 1320 mm Door opening height: 1625 mm The body is divided into bays, each measuring 1320 mm (width) × 1625 mm (height) × 1073 mm (depth). 🔩 Full aluminum welded construction – lightweight, durable, corrosion-resistant 🚪 Roll-up doors – fast and easy pallet access 🦺 Foldable side steps with cabin alarm 🧲 Central locking, rubber side bumpers, grab handles 📦 Optional: removable shelves, logo branding, rear-view camera. 🛠️ Technical & Operational Condition Full technical inspection completed Ideal for beverage logistics and door-to-door distribution Optimized payload thanks to ultra-light aluminum body 💰 Price: Export support | International delivery possible | VAT invoice