Three-way tipper van

MERCEDES-BENZ 818 Atego Kipper Tüv 3/27 neu Top Zustand

Condition: used, mileage: 166,770 km, power: 134 kW (182.19 HP), first registration: 04/2006, fuel type: diesel, empty load weight: 4,700 kg, maximum load weight: 2,790 kg, overall weight: 7,490 kg, tire size: 9.5R17.5, axle configuration: 4x2, wheelbase: 2,700 mm, brakes: constant throttle, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, number of seats: 2, loading space length: 3,800 mm, loading space width: 2,300 mm, loading space height: 400 mm, Equipment: ABS, cabin, cruise control, differential lock, low noise, onboard computer, power assisted steering, trailer coupling, Vehicle location: Bovenden, steel superstructure, Kz. house, 1x air seat, rear window, electric mirror, heated mirror, cruise control, switch 6, ABS (anti-lock braking system), constant throttle, power take-off, differential lock, leaf suspension, AHK air-light-hydr., low-noise G1, U-protection, pendulum flaps, roof hatch, environmental badge yellow Wheelbase: 2700 mm Body: 3-sided tipper body Loading height approx. 1140 mm! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dcjdsvhmdyepfx Aphjn - .

Condition: used, mileage: 8,948 km, axle configuration: 4x4, gearing type: mechanical, Year of construction: 1987, ± 40 units available from stock, subject to prior sale. Serviced, painted, and inspected. Ready for immediate use. Brand: MERCEDES BENZ Model: 1017 AK Drive configuration: 4x4 Engine: In-house 6-cylinder, type OM 352 A V, 5,675 cm³ (364 cubic inches), turbocharged, liquid-cooled. Power: 168 hp at 2,800 rpm Transmission: 5-speed Transfer case: 2-speed, type VG 500-3 Top speed: 80/85 km/h Fuel type: Diesel Fuel tank capacity: 135 liters (30 gallons) Crew: 1 + 2 Length: 7.14 m (278 inches) Width: 2.47 m (96 inches) Height: 3.25 m (126 inches) Weight: 12,200 kg (26,840 lb) Mileage between 8,000 and 20,000 km Rear area with benches 4 persons per bench Total capacity: approx. 16 persons ± 40 units available from stock, subject to prior sale. Dcodpfx Apsyydzxohsn = Further information = Drive: Wheel Unladen weight: 12,200 kg CE marking: Yes

Condition: used, mileage: 153,135 km, power: 77 kW (104.69 HP), first registration: 08/1994, fuel type: diesel, empty load weight: 5,000 kg, maximum load weight: 2,490 kg, overall weight: 7,490 kg, tire size: 215/75R17,5, axle configuration: 4x2, wheelbase: 3,200 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 3, loading space length: 3,300 mm, loading space width: 2,200 mm, loading space height: 400 mm, Equipment: ABS, additional headlights, cabin, crane, differential lock, low noise, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden, steel superstructure, registration number house, 1x comfort seat, double bench seat, seat heating, rear window, electric mirror, heated mirror, switch 6, ABS (anti-lock braking system), power take-off, differential lock, rotating beacon, leaf suspension, air/light/hydraulic trailer hitch, low-noise G1, lashing eyes, U-protection, swing flaps, roof hatch, crane behind house, emergency stop, foldable, 2-point support hydr, low-noise G1, lashing eyes, U-protection, pendulum flaps, roof hatch, crane behind house, emergency stop, foldable, 2-point hydraulic support, 1x hydr. extension, red environmental badge Wheelbase: 3200 mm Body: Meiller 3-sided tipper body with crane Fassi F65A.21 from 2009 Flame system, driver comfort package, tank capacity: 125l, towing capacity 3.5t. Load diagram: 2m-3000kg, 2.3m-2610kg, 3.5m-1900kg, 3.8m-1650kg, 5.4m-1160kg! Spare wheel available at extra cost! Djdpfx Apovhia Rjhscn No rear air connections! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, maximum load weight: 36,515 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 05/2027, Equipment: ABS, Excerpt from Equipment List: Gooseneck: Gooseneck with front corners angled approximately 45° and rear taper of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking approximately 30 mm thick. Extendable Loading Platform: Extendable loading platform with rear taper of approximately 1,000 mm x 8°. 5 pairs of lashing rings that fold outwards (LC 5,000 daN). 3 pairs of lashing rings that fold outwards (LC 10,000 daN). 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN). Hardwood decking approximately 48 mm thick, with diamond plate decking over the axles. Axles: BPW axles and suspension, all axles with hydro-mechanical forced steering. Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve. Axle tool. Tires: Tires 245/70 R 17.5 3PMSF, load index (146/146 F) - manufacturer of our choice. Kingpin: JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Braking System: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint is not possible. Steel Structure: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical System: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Includes the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approximately 400 mm high. - Yellow-red air couplings on the galvanized connection bar at the front. - 4 wheel chocks with holder on the front wall (± 5kg) - One spare wheel holder in front of the front wall. - Electro-hydraulic unit (± 45kg) - Steering from the front and rear by means of a cable remote control with push buttons, with single-axle steering control (without installation in the tractor unit) - Mounting in the rear area of the gooseneck for aluminum loading ramps. - European reflector signs (red-yellow) on the rear of the trailer. Dedozqiiaspfx Aphecn - Yellow reflector tape according to EU regulations on the side, on the extendable section and at the rear of the trailer. - On the gooseneck and on the rear panel, one holder on the left and right for warning signs including socket. - One holder for a rotating beacon on the rear of the trailer. - Galvanized folding supports under the taper of the loading platform. - One mud flap on the rear of the trailer. - Manual and description on a USB stick. - Speed stickers 80 km/h on the rear and on both sides. - Load measuring device for determining the axle loads including load chart.

Condition: new, empty load weight: 614 kg, maximum load weight: 1,386 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,530 mm, loading space width: 1,550 mm, total length: 1,630 mm, total width: 990 mm, total height: 3,930 mm, suspension: steel, tire size: 165R13C 96/94N, This tipper has a frame construction with a closed profile, which increases its stability. It uses a 5-stage cylinder which enables a larger tipping angle (up to 55°). All side walls can be opened and removed. The model also has a steel floor. | KIPPER 250/2 C S 2T Reversible tipper | Galvanized frame | Lockable storage shaft for 2 access ramps incl. ramps Ramps (L:243cm, W: 30cm) | Loading area dimensions: L: 2.53m W: 1.52m Dropside height: 0.40m Loading height 0.70m | 4 lashing rings (2 left, 2 right) recessed in the floor | Knott axle with drum brake | Leaf suspension | Operating voltage 12V | Spindle parking brake | Errors excepted. Dodpfxsu R D Sde Aphscn

Condition: like new (used), functionality: fully functional, power: 125 kW (169.95 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 13,700 kg, operation weight: 13,700 kg, drive condition: 100 %, chain condition: 100 %, first registration: 09/2024, next inspection (TÜV): 09/2025, emission class: euro5, shovel volume: 3 m³, Year of construction: 2023, operating hours: 135 h, machine/vehicle number: HNPM000001, Equipment: UVV, additional headlights, air conditioning, cabin, hydraulics, onboard computer, soot filter, steel tracks, DEMO – Machine with 135 hours for only €129,000 - Operating weight: 13,700 kg - ROPS/FOPS cab with air conditioning and heating - 3,300 mm PAT six-way dozer blade, foldable to 2,382 mm - IVECO 4-cylinder turbo diesel engine, 6.7 liters, Stage V, AdBlue - Power: 125 kW (170 HP) Dcedpfx Apel Uy Shshen - Operating weight: 13,700 kg (with ripper +1,200 kg) - Machine width over tracks: 2,490 mm - Blade width: 3,300 mm - Blade height: 1,305 mm - Ripping depth: 500 mm - Dumping height: 600 mm - Blade capacity: 3 cbm - Track shoes: 560 mm - Working hydraulics by Linde Hydraulik, Aschaffenburg: - Electronic control of working hydraulics - Load-sensing variable pump - Return flow filtration in tank - Blade vibration function - Blade quick-drop function - Blade float function Hydrostatic drive by Linde Hydraulik, Aschaffenburg: - 3 adjustable speed ranges - Automatic parking brake - Electronic overloading limit control - Proportional drive joystick - Hydrostatic travel drive - Machine release switch - Emergency stop button - Planetary final drives - Seat contact switch 0–10.0 km/h (forward & reverse) All prices plus VAT. More info at klarmann.de/shantui

Condition: used, empty load weight: 1,300 kg, maximum load weight: 2,700 kg, overall weight: 4,000 kg, axle configuration: 2 axles, first registration: 06/1978, loading space length: 4,000 mm, loading space width: 1,750 mm, loading space height: 400 mm, total length: 6,000 mm, total width: 2,350 mm, total height: 2,700 mm, suspension: steel, tire size: 7.00 R 16, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2 axles, tandem axle, leaf spring suspension, mechanical ramps. Dcsdpsi Rnllsfx Aphon Superstructure: mechanical ramps, wooden floor, ramp dimensions: 1800 x 500 mm. Refurbished for EUR 1,500 including paint! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, mileage: 425,000 km, power: 257 kW (349.42 HP), first registration: 10/2007, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: mechanical, loading space length: 4,900 mm, loading space width: 2,300 mm, loading space height: 900 mm, Year of construction: 2007, Equipment: ABS, crane, Man TGA 26.350 / 6x4 TIPPER 4,90 m + CRANE + BORDMATIC Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2007 ? MILAGE: 425 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? POWER STEERING ? Immobiliser ? TACHOGRAPH TIPPER: 490 x 230 x 90 cm (L x W x H) CAPACITY: 12 000 kg TOTAL WEIGHT: 26 000kg WHEELBASE: 390/140 cm TIRE SIZE: FRONT : 385/65R22,5 BACK : 315/80R22,5 SUSPENSION: SPRING CRANE: TEREX ATLAS 125.2 TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? Dsdpfx Ajx I Upvephjcn (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 60376

Condition: used, mileage: 537,353 km, power: 114 kW (155.00 HP), first registration: 12/1999, fuel type: diesel, fuel: diesel, color: blue, gearing type: mechanical, emission class: euro3, number of seats: 2, Year of construction: 1999, Equipment: ABS, EBS, trailer coupling, = Additional options and accessories = - Sunroof - Sun visor = More information = Dcsdext Tr Rjpfx Aphon Engine capacity: 4.580 cc GVW: 7.490 kg Selling price: € 6.000, US$ 6.921 Drive type: Rear-Wheel Drive Purchase on credit is possible: Yes

Condition: used, Year of construction: 2018, operating hours: 1,214 h, = Additional options and accessories = - Automatic/hydraulic quick coupler - Hammer/shear hydraulics - Grading bucket - Standard digging bucket = Notes = new tracks Dcsdpoyw Iu Defx Aphon = Further information = Drive: tracked Unladen weight: 2,665 kg Contact Geert Geuens for more information.