Tank container

Welfit Oddy 24.000 Liter V4A Vollrahmen Iso Laufsteg

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, tank capacity: 26,000 l, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, overall weight: 36,000 kg, wall material: stainless steel, operating temperature: 130 °C, operating pressure: 4 bar, pressure (max.): 6 bar, Stainless steel V4A tank container with three baffle plates and four "compartments". 4 x manhole covers on top: either 2 x 50 cm diameter and 2 x 30 cm, or 1 x 50 cm and 3 x 30 cm diameter. Bottom outlet is three-inch BSP, equivalent to 7.5 cm. ADR valid until 1/2028. Exterior photos are original, interior photos as well; manhole cover photos are from archive. Location: Rotterdam. All details are without guarantee; errors and prior sale excepted. Djdsxzq Dyepfx Alaowa

Condition: new, overall weight: 3,500 kg, Year of construction: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We deliver the right vacuum suction system for your every need! - Worldwide delivery/Dealer inquiries welcome! Internal Number: #502 The images shown are sample images. Actual equipment and color may vary. STS V-2.0 Tank • 2,000 L capacity tank • Hot-dip galvanized tank • Tank slightly inclined to the rear for easier cleaning • Lateral cleaning port on the tank to remove contamination or blockages without opening the tank lid • Tank lid opens fully to the passenger side and is secured with hook bolts • Standard dual safety levels installed to prevent compressor damage • Siphon separator – overflow protection with 2 balls and viewing glass • Pressure gauge on suction assembly with protective bracket • Mechanical fill level indicator with color scale Engine and Compressor • MEC 3000 vacuum compressor, 3,500 L air flow • Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) • Maximum overpressure: 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • Honda GX 390 industrial engine – electric starter, oil sensor, control panel with ignition switch, battery, and tank • Internal suction hose to prevent damage within the engine unit • Silencer for vacuum compressor with oil collection • Stainless-steel heat shield above exhaust • 1 liter of biodegradable compressor oil, stored in oil bottle holder • 5L fuel canister in holder • Standard long-neck funnel for oil changes and refilling • All engine components and accessories stored in lockable engine compartment Dodpfozi Ir Rex Alaswa • Engine compartment made of aluminum and powder-coated in preferred color Chassis • Self-supporting chassis, fully hot-dip galvanized • Tandem low-loader chassis, 3.5t • Track width matches standard passenger cars and vans for optimal driving stability • Lowest possible center of gravity for the suction tank • 2 axles, each with 1,750 kg load capacity and independent suspension from a reputable manufacturer • Continuous welded V-drawbar • Robust metal fenders with integrated lamp housings • Stake holders for quick securing of suction hoses using rubber bands • Storage options for tools and accessories Vacuum Tank • Overrun brake with automatic reverse feature • Automatically locking ball coupling • Reinforced jockey wheel • 13-pin electrical connector Connections and Hoses • 2x suction hoses (3") 5m long with Perrot couplings • 1x suction lance 3" (1500mm long) • 1x Perrot connection (3") at the bottom of the tank lid • 1x Perrot connection (3") on the right side in the direction of travel Custom builds and special equipment available on request – Check our offers! For more details or photos, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Subject to changes, prior sale, and errors. The buyer is responsible for independently verifying the condition and features of the item. The sale is made exclusively according to our Terms & Conditions and with exclusion of any warranty.

Condition: used, mileage: 2,500 km, first registration: 04/2024, overall weight: 2,700 kg, Year of construction: 2024, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We deliver the right vacuum suction system for any application! - Delivery worldwide / Dealer inquiries welcome! Internal number: #382 The images shown are sample images. Actual equipment and color may vary. STS V-1.5 Vacuum Suction Tank Trailer Tank - 1,500-liter tank capacity - Fully hot-dip galvanized tank - Tank is slightly inclined to the rear for easier cleaning - Side rinsing port in the tank allows removal of contaminants or blockages without opening the tank lid - Tank lid opens completely toward the passenger side and is secured with hook screws - Standard two safety stages installed to prevent damage to the compressor - Siphon separator - Overflow with 2 balls and sight glass - Pressure gauge on suction assembly with protective bracket - Mechanical level indicator with color scale Engine and Compressor - Vacuum compressor MEC 3000 with 3,500 l/min air capacity - Vacuum max. -0.8 bar (continuous operation at -0.5 bar) - Overpressure max. 0.49 bar - Maintenance-free V-belt drive for the vacuum compressor - Industrial engine (gasoline) - Electric starter, oil sensor, control panel with ignition lock, battery, and fuel tank - Internal suction hose to prevent exposure within the engine unit - Silencer for vacuum compressor with oil collector - Stainless steel heat shield above exhaust - 1 liter of biodegradable compressor oil stored in oil bottle holder - 5-liter gasoline canister in holder - Standard long-neck funnel for changing and refilling engine oil - All engine components and accessories stored in a lockable engine box - Engine box made of aluminum, powder-coated in the desired color Dwsdpjzit Uqefx Alaja Chassis - Self-supporting chassis, fully hot-dip galvanized - Low-bed tandem chassis, 2.7t GVW - Track width matches cars and Sprinter for optimal driving characteristics - Lowest possible center of gravity for the suction tank - 2 axles, each with 1,350kg load capacity and independent suspension from a renowned manufacturer - Continuous welded V-drawbar - Robust fenders with metal lamp housings - Stake brackets for quick securing of suction hoses with rubber straps - Storage options for tools and accessories Suction Tank - Overrun brake with reverse-automatic - Automatically locking ball coupling - Reinforced jockey wheel - 13-pin electrical connector Connections and Hoses - 2x suction hoses (3") 5m each with Perrot couplings - 1x suction lance 3" (1,500mm long) - 1x Perrot connection (3") at the bottom of the tank lid - 1x Perrot connection (3") on the right side in the direction of travel Notes & Service - Worldwide delivery possible - Dealer inquiries welcome - Special constructions & custom adaptations on request For further detailed information and/or photos, please contact us directly. A wide selection of other vehicles for purchase or rent can be found at: Specifications subject to change, prior sale, and errors excepted. The buyer is responsible for independently verifying the condition and features of the goods. Sale is exclusively subject to our general terms and conditions with exclusion of any warranty.

Condition: used, axle configuration: 3 axles, first registration: 05/2011, color: other, Year of construction: 2011, Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left 10 mm right 10 mm We have the possibility to stack trailers! = More information = Empty weight: 3.960 kg Djdpjwqrg Dofx Alaowa

Condition: used, Year of construction: 1999, total length: 9,200 mm, total width: 2,500 mm, total height: 2,600 mm, Tank Capacity (liter): 30750 Number of compartments: 1 Compartment capacity (liters): 30750 Material code: 1.4306 Material tank: Inox Isolated: ✓ Test pressure: 2.6 bar Maximum working pressure: 2.0 bar Foodstuffs: ✓ = More information = Year of manufacture: Jan 1998 Empty weight: 3.900 kg Carrying capacity: 32.100 kg GVW: 36.000 kg = Dealer information = Dsdpfx Aezka A Relaowa For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: used, axle configuration: 3 axles, first registration: 01/2007, suspension: air, tire size: 385 65 R 22,5, color: red, Year of construction: 2007, Equipment: ABS, Axle configuration Tyre size: 385 65 R 22,5 Make axles: BPW Brakes: drum brakes Rear axle 1: Tyre profile left: 20%; Tyre profile right: 20% Rear axle 2: Tyre profile left: 40%; Tyre profile right: 40% Rear axle 3: Tyre profile left: 40%; Tyre profile right: 40% Weights Empty weight: 5.260 kg Carrying capacity: 33.740 kg GVW: 39.000 kg Functional Extendable superstructure: Yes = Additional options and accessories = - ADR Dwsdpfx Aouktllslaea - Air suspension - Drum brakes

Condition: used, axle configuration: 3 axles, first registration: 10/2005, color: other, Year of construction: 2005, Axle 1: left 12 mm right 7 mm Dedpfx Aoxwuzuolajwa Axle 2: left 4 mm right 6 mm Axle 3: left 10 mm right 10 mm We have the possibility to stack trailers! = More information = Empty weight: 3.750 kg

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2003, total length: 9,060 mm, total width: 2,500 mm, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,450 mm, Year of construction: 2003, Equipment: ABS, = Additional Options and Equipment = - ADR - EBS Dwsdpfey H Hb Usx Alaoa - Lift axle - Alloy wheels - Air suspension - Disc brakes = Remarks = Attractive and fully functional Van Hool 20FT tipper chassis (year of manufacture 2003) with ABS/EBS, SAF axles with disc brakes (Intradisc), 2 lift axles, ADR approval (EXII, EXIII, FL, AT), tipping angle up to 20 degrees (24V), unladen weight: 5,300 kg, permitted gross weight: 39,000 kg, tyres: 385/65-R22.5 (tread left: 9/10/7 mm; tread right: 11/10/8 mm), Dutch registration. = Further Information = Axle configuration Tyre size: 385/65 R22.5 Axle brand: SAF Intradisc Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy wheels; Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 55%; Tyre tread right: 70% Rear axle 2: Alloy wheels; Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 65%; Tyre tread right: 65% Rear axle 3: Alloy wheels; Max. axle load: 9,000 kg; Tyre tread left: 45%; Tyre tread right: 50% Weights Unladen weight: 5,300 kg Payload: 33,700 kg Gross weight: 39,000 kg Functionality Body manufacturer: Van Hool 3B2013 Condition Technical condition: very good Visual condition: very good Identification Registration number: OH-89-FS Further information Please contact Arne Honingh for more information.

Condition: good (used), Year of construction: 2007, total length: 6,060 mm, total width: 2,550 mm, total height: 2,670 mm, = Additional options and equipment = - ADR = Remarks = Welfit Oddyl 20FT ISOTank container 25,030L/1-compartment UN Portable T-11 L4BH steam heating bottom discharge 2.5Y + CSC test: 06-2026 = Further information = General information Year of manufacture: June 2007 Model year: 2007 Weights Tare weight: 3,650 kg Payload: 32,350 kg gross vehicle weight: 36,000 kg Functional Cargo space capacity: 25,064 l Body make: Welfit Oddy TC 25.070L Number of compartments: 1 Condition Technical condition: good Visual condition: good Further information Please contact Arne Honingh for more information. Dwodoyzfvajpfx Alaoa

Condition: used, machine/vehicle number: WFDFLT33902010193, axle configuration: 3 axles, first registration: 07/2013, suspension: air, tire size: 385/65, tire condition: 30 %, color: other, Year of construction: 2013, = Additional options and accessories = - ADR - Air Suspension - BPW Axles - Disc brakes Dwsdpfx Aox Sdg Eelasa = More information = Tyre size: 385/65 Make axles: BPW Tyre profile: 30% Brakes: disc brakes Suspension: air suspension