Open trailer with tarp

Schwarzmüller T-Serie Brücke / Swiss-Vehicle

Condition: good (used), Manufacturer: Terex Demag Type: AC 45 City Itjdexb U Ehepfx Adwod Year: 2020 Capacity (t): 45 t Main Boom: 31.20 m Jib: 13.00 m Kilometers: 46,901 km Crane Hours: 5,028 h Runner: 1.2 m Tires: 385/95 R25 Extra: Remote Control

Condition: used, maximum load weight: 36,216 kg, overall weight: 49,500 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 13,100 mm, loading space width: 2,480 mm, loading space height: 3,100 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, FAYMONVILLE MAX100 3-axle SANH semi low loader forklift transport trailer First registration 10/2024 Unladen weight approx. 13,200 kg Fifth wheel height 1,150 mm Lowbed length 9,300 mm Gooseneck length 3,800 mm Internal width 2,480 mm Loading height in lowbed 860 mm Itodpfx Adsx Nlhrowed Height-adjustable tarpaulin superstructure, adjustable by approx. 400 mm EDSCHA sliding roof, can be moved forward Rear end portal hydraulically extendable by approx. 750 mm Loading platform behind gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm; gooseneck and lowbed with grating surface, over the axles checker plate with painted-in sand coating Two-part steel ramps approx. 3,185 + 1,420 mm, each 1,250 mm wide, also with grating surface, maximum capacity 30,000 kg 13-fold 235/75 R 17.5 tyres BPW axles with drum brakes 1st axle LIFT AXLE 3rd axle STEERING AXLE Air suspension with lifting/lowering function WABCO trailer EBS Electric-hydraulic system 24-volt RENTING is the new BUYING – available from us immediately on full-service rental as well.

Condition: new, empty load weight: 15,450 kg, maximum load weight: 65,550 kg, overall weight: 80,000 kg, axle configuration: > 3 axles, loading space length: 21,900 mm, loading space width: 2,540 mm, loading space height: 925 mm, suspension: air, tire size: 235/75 R 17.5, color: grey, Equipment: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10° Technical fifth wheel load: 30,000 kg. For tractor units: 4x2, 6x2 and 6x4 Loading area: Loading area in double-extendable design, length approx. 8,800 mm with bevel at the rear approx. 500 mm x 10°. A support table approx. 300 mm wide with long holes at the front and rear for optional bridging elements that can be hung and moved is welded to the middle support. Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length. Axles and tires: BPW axles and suspension, 1st axle with pre-steering, all other axles with hydro-mechanical forced steering. 1st axle with electro-magnetic reversing lock that can be activated via reverse gear and manually. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Manufacture of our choice Sockets and lighting: 24-volt lighting system Design in accordance with EU regulations ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Complete HRM metallization Complete steel construction shot blasted, then hot-finished with ZINACOR 850 Paint: 6-K final treatment: Complete steel construction shot blasted after welding 1 layer of zinc-based base paint, 1 layer of adhesion primer. Final painting with 2 layers of 2-K paint in one color in DB 7350 Nova gray, then sealing of the cavities with special wax Accessories: Bulkhead made of steel, pluggable, approx. 400 mm high Connection strip for supply lines to the tractor unit, attached at the height of the outer frame profile ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin. If your pin assignment differs from the ISO connection standard, please let us know 3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches On the gooseneck 1 pair of plug-in aluminum side walls, approx. 400 mm high, in anodized design. 3.5" kingpin. Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide 2 brake shoes with bracket in front of the bulkhead. Mechanical seat supports with 2-speed gearbox and crank. Control valves for the hydraulic ramps on the right of the vehicle 1 pair of mechanical rear supports. Central lubrication system with 1 pump, brand BEKAMAX, with normal grease according to NLGI-2 Removable protection around the central lubrication pump(s) Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles, without installation in the tractor unit Under the gooseneck, as well as on the end cross member, left and right, one 7-pin socket with bracket for the warning signs A 7-pin socket on the end cross member Manual and description One INOX storage box, one-piece, approx. 2,480 x 340 x 390 mm in a straight design Please note that Special equipment and accessories generally increase the dead weight and reduce the payload accordingly Itjdpfsrigw Rox Adwjd Warning package: 4 warning signs, approx. 423 x 423 mm, extendable by approx. 1,000 mm, including 2 LED position lights and brackets for rotating beacon.

Condition: used, mileage: 67,400 km, lifting height: 59,100 mm, Year of construction: 2018, Drive: wheel Unladen weight: 48,000 kg Lifting capacity: 8,000 kg Serial number: 076646 Condition of front tires: 0 Condition of rear tires: 0 Transport dimensions (L x W x H): 16.85 x 2.75 x 4 m Isdpfjuwua Eox Adwjtd Please contact PFEIFER GROUP for more information.

Condition: used, maximum load weight: 14,100 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2015, Year of construction: 2015, Equipment: ABS, Jumbo trailer Schwarzmüller platform with drop sides Itsdpex Sbwzefx Adwed

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT45001013946, empty load weight: 12,100 kg, maximum load weight: 37,900 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 01/2025, loading space length: 9,200 mm, loading space width: 2,480 mm, loading space height: 3,200 mm, total length: 13,750 mm, total width: 2,550 mm, total height: 4,070 mm, suspension: air, tire size: 205/65 R 17,5 ", maximum speed: 90 km/h, color: blue, Year of construction: 2024, Equipment: tail-lift, The images shown are archive photos; the vehicle may still be in use! Jumbo Low Loader Chassis for construction machinery transport up to 36,000 kg and a maximum external machine width of 2,500 mm. Fifth wheel plate with replaceable 2" king pin. Rear slope approximately 1,500 mm long at 7°. Ramp shaft closed at top with steel/checker plate. Trailer B-dimension: 12,000 mm Free rear swing radius approx.: 2,350 mm Spare wheel carrier with 1 spare wheel Plastic toolbox In the low-bed: Omega rail laterally below the outer frame as a lashing bar for tarpaulin and spacer holders for lashing pins, not within the wheel area. Lashing Points: Gooseneck: - 5 pairs of lashing points recessed in outer frame, each rated at 5 t - 2 pairs of lashing pins recessed on top and side of outer frame, each rated at 10 t Low-bed: - 7 pairs of lashing pins recessed on top and side of outer frame, each rated at 10 t - 9 pairs of lashing points recessed in outer frame, each rated at 5 t - 3 pairs of additional folding lashing points recessed in the low-bed floor, each 10 t (1x before the drop, 1x in front of the 1st axle, 1x behind the 3rd axle) Axles & Suspension: - Drum brake axles - Last 2 axles self-steering - Air suspension with lift & lower valve + auto-reset function - Raise & lower function with quick release Wheels and Tires: - 205 / 65 R 17.5 for 8,000 kg axle load technical max. at 90 km/h - Steel rims twin arrangement Brake System: - 2-line air brake system - Spring-loaded parking brake - 2 non-interchangeable coupling heads at front, without connecting line - Knorr EBS Electrics: - 2 pairs of double LED warning panels, extendable - 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front - 24 Volt, multi-chamber LED lights - Flashing side marker lights - Beacon with holder - Interior LED work light on front wall - 2 additional LED work lights at rear, switched via reversing light Floor: - Floor designed for maximum forklift axle load of 10,000 kg at minimum 300 mm tire width (note: deformation possible!) Stakes: - 3 pairs of sliding stakes, movable along entire length, with four insert sockets each; only the rear 2 zones are of equal length! - Stake positions: 1x gooseneck, 3x in low-bed Insert Slats: - 5 rows of wooden insert slats Itedpfxsylkywe Adwsd Access Ramps: - Ramp surface with "Mega Grip" serrated grating (max. forklift axle load 9,000 kg at min. 200 mm tire width) - Hydraulically operated via independent electric unit installed in stainless steel box front-right, including ramp control; additional operation via radio remote control incl. rear support operation, customer's responsibility! NATO socket on truck required, including connecting line to truck as spiral cable; connection line must NOT be connected while driving! Truck not included. - Steel ramp full width, approx. 3,300 mm long + 3-part aluminium foldable section approx. 900 mm for total ramp length 4,100 mm; if necessary, additional phenolic board max. 9 mm thick under aluminium sections for reduced ramp angle; ramp load capacity 26,000 kg, heavy-duty version; over ramp shaft steel/checker plate; ramp secured during transit with top link. Exact specification available on request!

Condition: new, axle configuration: 2 axles, loading space length: 6,400 mm, loading space width: 2,480 mm, loading space height: 600 mm, suspension: air, tire size: 205/65-17,5, = Further Options and Accessories = - LED lighting - Air suspension = Notes = Internal reference number for customer inquiries: 5-165 PAVIC BPA 18 64ZC Turntable Platform Trailer for Containers. Platform bodies are universally usable, including for oversized cargo. With additional container locks, you are even more flexible in your business. Suitable for 20" containers in various configurations. Ultra low-build design: only 950 mm from ground to loading edge! Payload = 12,020 kg (gross weight 16,000 kg - tare weight 3,980 kg) Approx. 780 mm coupling height Chassis length approx. 6,400 mm head frame to head frame Coupling dimension (B) = 7,900 mm Removable side boards and stanchions Side board height approx. 600 mm Kinnegrip stanchions K20 height: approx. 600 mm (lever in stanchion) Front wall approx. 800 mm high 4x extendable container locks (side-mounted) Container locks flush with the floor Ferry rings Towing eye Ø 40 mm 2x axles, 9 t each Air suspension (including lifting and lowering function) Premium tires 205/65 R 17.5 twin tires LED lighting system Socket in rear for revolving beacon Warning panels, red/white striped, extendable, 2x rear and 2x illuminated at the front bends KTL with zinc phosphating plus powder coating, highest corrosion protection Financing available through our financing partners. For further questions, our sales team will be happy to assist you. Itedpfx Asylu U Sjdwod This is a non-binding offer. Subject to prior sale, errors, and changes. = Further Information = Axle configuration Tire size: 205/65-17.5 Brakes: Drum brakes Suspension: Air suspension Front axle: Steered Weights Tare weight: 3,975 kg Payload: 10,025 kg Gross weight: 14,000 kg Function Superstructure brand: PAVIC container platform Condition General condition: very good Technical condition: very good Optical condition: very good